DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: On the process of designing material qualification type specimens manufactured using laser powder bed fusion

Journal Article · · Materials & Design

Sponsoring Organization:
USDOE
OSTI ID:
1969568
Journal Information:
Materials & Design, Journal Name: Materials & Design Vol. 229 Journal Issue: C; ISSN 0264-1275
Publisher:
ElsevierCopyright Statement
Country of Publication:
United Kingdom
Language:
English

References (70)

Heat transfer model and finite element formulation for simulation of selective laser melting journal October 2017
Effect of Hatch Spacing on Melt Pool and As-built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches journal December 2018
Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting journal July 2015
Steels in additive manufacturing: A review of their microstructure and properties journal January 2020
Effect of selective laser melting layout on the quality of stainless steel parts journal April 2012
Automated high-throughput tensile testing reveals stochastic process parameter sensitivity journal January 2020
The thermal-mechanical behavior of WTaMoNb high-entropy alloy via selective laser melting (SLM): experiment and simulation journal January 2018
Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM) journal January 2016
Cross-testing laser powder bed fusion production machines and powders: Variability in mechanical properties of heat-treated 316L stainless steel journal June 2021
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism journal April 2016
Effect of the fabricating locations and orientations according to the powder coating direction in Selective Laser Melting on mechanical properties journal July 2021
Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel journal August 2019
Influence of Inherent Surface and Internal Defects on Mechanical Properties of Additively Manufactured Ti6Al4V Alloy: Comparison between Selective Laser Melting and Electron Beam Melting journal March 2018
Surface Quality Research for Selective Laser Melting of Ti-6Al-4V Alloy journal September 2016
Micro selective laser melting of NiTi shape memory alloy: Defects, microstructures and thermal/mechanical properties journal November 2020
Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility journal March 2021
Additive manufacturing of metallic components – Process, structure and properties journal March 2018
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure journal August 2014
On the study of keyhole-mode melting in selective laser melting process journal November 2019
Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment journal September 2018
The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys journal December 2018
Effect of molten pool boundaries on the mechanical properties of selective laser melting parts journal November 2014
Optical in-situ monitoring and correlation of density and mechanical properties of stainless steel parts produced by selective laser melting process based on varied energy density journal September 2019
Digitally twinned additive manufacturing: Detecting flaws in laser powder bed fusion by combining thermal simulations with in-situ meltpool sensor data journal December 2021
In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting journal October 2011
Research on in situ monitoring of selective laser melting: a state of the art review journal March 2021
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder journal March 2013
Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties journal October 2019
Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting journal November 2019
Progressive failure monitoring and analysis in aluminium by in situ nondestructive evaluation
  • Wisner, Brian J.; Potstada, Philipp; Perumal, Vignesh I.
  • Fatigue & Fracture of Engineering Materials & Structures, Vol. 42, Issue 9 https://doi.org/10.1111/ffe.13088
journal July 2019
Optimization of Scan Strategies in Selective Laser Melting of Aluminum Parts With Downfacing Areas journal October 2014
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM) journal September 2017
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting journal February 2014
Metal Additive Manufacturing: A Review journal April 2014
Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting journal January 2018
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters journal August 2017
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system journal August 2014
Metal additive manufacturing in aerospace: A review journal November 2021
The Additive Manufacturing (AM) of titanium alloys journal March 2017
In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes journal March 2018
Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures journal October 2015
Effect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316L stainless steel journal January 2018
On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting journal August 2015
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg journal January 2019
Effect of high layer thickness on surface quality and defect behavior of Ti-6Al-4V fabricated by selective laser melting journal December 2020
Processing a non-weldable nickel-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking journal August 2020
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification journal February 2017
In Situ Monitoring Systems of The SLM Process: On the Need to Develop Machine Learning Models for Data Processing journal June 2020
Selective laser melting of aluminum alloys journal April 2017
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy journal November 2020
Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF journal August 2019
Investigation of particle fracture during fatigue of aluminum 2024 journal June 2018
Mesoscopic-scale simulation of pore evolution during laser powder bed fusion process journal June 2020
Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application journal December 2016
A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components journal October 2020
In Situ Microscopic Investigation to Validate Acoustic Emission Monitoring journal August 2015
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting journal March 2018
Influence of surface pores on selective laser melted parts under lubricated contacts: a case study of a hydraulic spool valve journal June 2019
The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting journal November 2016
Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation journal November 2014
Microstructure and Properties of SLM AlSi10Mg: Understanding the Influence of the Local Thermal History journal January 2020
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting journal August 2019
Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy journal January 2019
Effect of particle reinforcement on the progressive failure of alumina trihydrate filled Poly(Methyl methacrylate) journal September 2020
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting journal December 2019
Standardization in additive manufacturing: activities carried out by international organizations and projects journal September 2014
Overview of Materials Qualification Needs for Metal Additive Manufacturing journal January 2016
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior journal February 2012
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties journal October 2015
Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder journal November 2014