Mesoscale slip behavior in single crystal and bicrystal tantalum

Zhou, Guowei; Tsai, Joshua; Russell, Tristan; Taghipour, Ehsan; Wagoner, Robert H.; Fullwood, David T.; Niezgoda, Stephen R.

doi:10.1016/j.mtla.2023.101730

Title: Mesoscale slip behavior in single crystal and bicrystal tantalum

Journal Article · 01 May 2023 · Materialia

DOI: https://doi.org/10.1016/j.mtla.2023.101730 · OSTI ID:1963339

;

; Russell, Tristan; Taghipour, Ehsan;

;

; Niezgoda, Stephen R.

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: SC0012483; SC0012587

OSTI ID:: 1963339

Journal Information:: Materialia, Journal Name: Materialia Vol. 28 Journal Issue: C; ISSN 2589-1529

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (51)

Dislocation pile-up and grain boundary interactions in 304 stainless steel Shen, Z.; Wagoner, R. H.; Clark, W. A. T. Scripta Metallurgica, Vol. 20, Issue 6 https://doi.org/10.1016/0036-9748(86)90467-9	journal	June 1986
An analysis of nonuniform and localized deformation in ductile single crystals Peirce, D.; Asaro, R. J.; Needleman, A. Acta Metallurgica, Vol. 30, Issue 6 https://doi.org/10.1016/0001-6160(82)90005-0	journal	June 1982
The deformation behavior of isoaxial bicrystals of Fe-3%Si Hook, R. E.; Hirth, J. P. Acta Metallurgica, Vol. 15, Issue 3 https://doi.org/10.1016/0001-6160(67)90087-9	journal	March 1967
Application of generalized non-Schmid yield law to low-temperature plasticity in bcc transition metals Lim, H.; Weinberger, C. R.; Battaile, C. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 4 https://doi.org/10.1088/0965-0393/21/4/045015	journal	May 2013
Long range internal stresses in single-phase crystalline materials Kassner, M. E.; Geantil, P.; Levine, L. E. International Journal of Plasticity, Vol. 45 https://doi.org/10.1016/j.ijplas.2012.10.003	journal	June 2013
The relation between polycrystal deformation and single-crystal deformation Kocks, U. F. Metallurgical and Materials Transactions B, Vol. 1, Issue 5 https://doi.org/10.1007/BF02900224	journal	May 1970
Work Hardening of Copper Single Crystals with Multiple Glide Orientations Takeuchi, Tomoyuki Transactions of the Japan Institute of Metals, Vol. 16, Issue 10 https://doi.org/10.2320/matertrans1960.16.629	journal	January 1975
Dynamic crystal plasticity modeling of single crystal tantalum and validation using Taylor cylinder impact tests Nguyen, Thao; Fensin, Saryu J.; Luscher, Darby J. International Journal of Plasticity, Vol. 139 https://doi.org/10.1016/j.ijplas.2021.102940	journal	April 2021
Compatibility of deformation in two-phase Ti-Al alloys: Dependence on microstructure and orientation relationships Luster, J.; Morris, M. A. Metallurgical and Materials Transactions A, Vol. 26, Issue 7 https://doi.org/10.1007/BF02670762	journal	July 1995
The nature of yielding and anelasticity in metals Li, Dayong; Wagoner, Robert H. Acta Materialia, Vol. 206 https://doi.org/10.1016/j.actamat.2021.116625	journal	March 2021
Grain Boundary Responses to Heterogeneous Deformation in Tantalum Polycrystals Bieler, Thomas R.; Sutton, Scott C.; Dunlap, Bret E. JOM, Vol. 66, Issue 1 https://doi.org/10.1007/s11837-013-0821-y	journal	November 2013
Slip planes in bcc transition metals Weinberger, C. R.; Boyce, B. L.; Battaile, C. C. International Materials Reviews, Vol. 58, Issue 5 https://doi.org/10.1179/1743280412Y.0000000015	journal	June 2013
Anomalous plasticity of body-centered-cubic crystals with non-Schmid effect Cho, Hansohl; Bronkhorst, Curt A.; Mourad, Hashem M. International Journal of Solids and Structures, Vol. 139-140 https://doi.org/10.1016/j.ijsolstr.2018.01.029	journal	May 2018
The influence of grain boundaries on mechanical properties Hirth, J. P. Metallurgical Transactions, Vol. 3, Issue 12 https://doi.org/10.1007/BF02661312	journal	December 1972
A predictive strain-gradient model with no undetermined constants or length scales Zhou, G.; Jeong, W.; Homer, E. R. Journal of the Mechanics and Physics of Solids, Vol. 145 https://doi.org/10.1016/j.jmps.2020.104178	journal	December 2020
Investigation of strain hardening near grain boundaries of an aluminum oligocrystal: Experiments and crystal based finite element method Demir, Eralp; Gutierrez-Urrutia, Ivan International Journal of Plasticity, Vol. 136 https://doi.org/10.1016/j.ijplas.2020.102898	journal	January 2021
Strain gradient plasticity: Theory and experiment Fleck, N. A.; Muller, G. M.; Ashby, M. F. Acta Metallurgica et Materialia, Vol. 42, Issue 2 https://doi.org/10.1016/0956-7151(94)90502-9	journal	February 1994
Laws for Work-Hardening and Low-Temperature Creep Kocks, U. F. Journal of Engineering Materials and Technology, Vol. 98, Issue 1 https://doi.org/10.1115/1.3443340	journal	January 1976
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
An experimental statistical analysis of stress projection factors in BCC tantalum Carroll, J. D.; Clark, B. G.; Buchheit, T. E. Materials Science and Engineering: A, Vol. 581 https://doi.org/10.1016/j.msea.2013.05.085	journal	October 2013
Modeling the microstructural evolution of metallic polycrystalline materials under localization conditions Bronkhorst, C. A.; Hansen, B. L.; Cerreta, E. K. Journal of the Mechanics and Physics of Solids, Vol. 55, Issue 11 https://doi.org/10.1016/j.jmps.2007.03.019	journal	November 2007
The Morphology of Tensile Failure in Tantalum Boyce, Brad L.; Clark, Blythe G.; Lu, Ping Metallurgical and Materials Transactions A, Vol. 44, Issue 10 https://doi.org/10.1007/s11661-013-1814-8	journal	June 2013
Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals Lim, H.; Carroll, J. D.; Battaile, C. C. International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.05.004	journal	September 2014
Slip transfer across grain and phase boundaries Werner, E.; Prantl, W. Acta Metallurgica et Materialia, Vol. 38, Issue 3 https://doi.org/10.1016/0956-7151(90)90159-E	journal	March 1990
New Mechanism for Yield Point Phenomena Zhou, G.; Fullwood, D. T.; Carroll, J. D. Journal of Engineering Materials and Technology, Vol. 144, Issue 1 https://doi.org/10.1115/1.4051855	journal	August 2021
The elastic–plastic transition of metals Chen, Zhong; Bong, Hyuk Jong; Li, Dayong International Journal of Plasticity, Vol. 83 https://doi.org/10.1016/j.ijplas.2016.04.009	journal	August 2016
Overview no. 42 Texture development and strain hardening in rate dependent polycrystals Asaro, R. J.; Needleman, A. Acta Metallurgica, Vol. 33, Issue 6 https://doi.org/10.1016/0001-6160(85)90188-9	journal	June 1985
A criterion for slip transfer at grain boundaries in Al Alizadeh, R.; Peña-Ortega, M.; Bieler, T. R. Scripta Materialia, Vol. 178 https://doi.org/10.1016/j.scriptamat.2019.12.010	journal	March 2020
Investigating active slip planes in tantalum under compressive load: Crystal plasticity and slip trace analyses of single crystals Lim, Hojun; Carroll, Jay D.; Michael, Joseph R. Acta Materialia, Vol. 185 https://doi.org/10.1016/j.actamat.2019.11.030	journal	February 2020
A numerical study of long range internal stresses associated with subgrain boundaries Gibeling, J. G.; Nix, W. D. Acta Metallurgica, Vol. 28, Issue 12 https://doi.org/10.1016/0001-6160(80)90027-9	journal	December 1980
A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys Knezevic, Marko; Beyerlein, Irene J.; Lovato, Manuel L. International Journal of Plasticity, Vol. 62 https://doi.org/10.1016/j.ijplas.2014.07.007	journal	November 2014
On the nonlinear anelastic behavior of AHSS Torkabadi, A.; Perdahcıoğlu, E. S.; Meinders, V. T. International Journal of Solids and Structures, Vol. 151 https://doi.org/10.1016/j.ijsolstr.2017.03.009	journal	October 2018
Slip transmission of high angle grain boundaries in body-centered cubic metals: Micropillar compression of pure Ta single and bi-crystals Weaver, Jordan S.; Li, Nan; Mara, Nathan A. Acta Materialia, Vol. 156 https://doi.org/10.1016/j.actamat.2018.06.046	journal	September 2018
Local Ratcheting Phenomena in the Cyclic Behavior of Polycrystalline Tantalum Colas, Damien; Finot, Eric; Flouriot, Sylvain JOM, Vol. 71, Issue 8 https://doi.org/10.1007/s11837-019-03539-z	journal	June 2019
A dislocation density-based single crystal constitutive equation Lee, M. G.; Lim, H.; Adams, B. L. International Journal of Plasticity, Vol. 26, Issue 7 https://doi.org/10.1016/j.ijplas.2009.11.004	journal	July 2010
Crystallographic orientation dependent fracture behavior in tantalum single crystals Lim, Hojun; Noell, Philip J.; Carroll, Jay D. Scripta Materialia, Vol. 191 https://doi.org/10.1016/j.scriptamat.2020.09.017	journal	January 2021
Investigation and modeling of the anomalous yield point phenomenon in pure tantalum Colas, D.; Finot, E.; Flouriot, S. Materials Science and Engineering: A, Vol. 615 https://doi.org/10.1016/j.msea.2014.07.028	journal	October 2014
An RVE procedure for micromechanical prediction of mechanical behavior of dual-phase steel Bong, Hyuk Jong; Lim, Hojun; Lee, Myoung-Gyu Materials Science and Engineering: A, Vol. 695 https://doi.org/10.1016/j.msea.2017.04.032	journal	May 2017
A physically based yield criterion I. Determination of the yield stress based on analysis of pre-yield dislocation behaviour van Liempt, Peter; Sietsma, Jilt Materials Science and Engineering: A, Vol. 662 https://doi.org/10.1016/j.msea.2016.03.013	journal	April 2016
Low-symmetry plastic deformation in BCC tantalum: experimental observations, modeling and simulations Maudlin, P. J.; Bingert, J. F.; Gray III, G. T. International Journal of Plasticity, Vol. 19, Issue 4 https://doi.org/10.1016/S0749-6419(01)00061-4	journal	April 2003
Complex unloading behavior: Nature of the deformation and its consistent constitutive representation Sun, Li; Wagoner, R. H. International Journal of Plasticity, Vol. 27, Issue 7 https://doi.org/10.1016/j.ijplas.2010.12.003	journal	July 2011
Quantification of dislocation structures from anelastic deformation behaviour Arechabaleta, Zaloa; van Liempt, Peter; Sietsma, Jilt Acta Materialia, Vol. 115 https://doi.org/10.1016/j.actamat.2016.05.040	journal	August 2016
Work hardening and deformation sub-structure in iron single crystals deformed in tension at 298°k Keh, A. S. Philosophical Magazine, Vol. 12, Issue 115 https://doi.org/10.1080/14786436508224942	journal	July 1965
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress Feaugas, X. Acta Materialia, Vol. 47, Issue 13 https://doi.org/10.1016/S1359-6454(99)00222-0	journal	October 1999
A dislocation-based constitutive law for pure Zr including temperature effects Beyerlein, I. J.; Tomé, C. N. International Journal of Plasticity, Vol. 24, Issue 5 https://doi.org/10.1016/j.ijplas.2007.07.017	journal	May 2008
An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al Bieler, T. R.; Alizadeh, R.; Peña-Ortega, M. International Journal of Plasticity, Vol. 118 https://doi.org/10.1016/j.ijplas.2019.02.014	journal	July 2019
Multiple slip in bicrystal deformation Livingston, J. D.; Chalmers, B. Acta Metallurgica, Vol. 5, Issue 6 https://doi.org/10.1016/0001-6160(57)90044-5	journal	June 1957
A dislocation density based constitutive law for BCC materials in crystal plasticity FEM Ma, A.; Roters, F.; Raabe, D. Computational Materials Science, Vol. 39, Issue 1 https://doi.org/10.1016/j.commatsci.2006.04.014	journal	March 2007
Plastic deformation of tantalum single crystals Byron, J. F. Journal of the Less Common Metals, Vol. 14, Issue 2 https://doi.org/10.1016/0022-5088(68)90115-X	journal	February 1968
Variation and consistency of Young’s modulus in steel Chen, Zhong; Gandhi, Umesh; Lee, Jinwoo Journal of Materials Processing Technology, Vol. 227 https://doi.org/10.1016/j.jmatprotec.2015.08.024	journal	January 2016
Estimation of Lankford Coefficients of Austenitic and Ferritic Stainless Steels using Mean Grain Orientations from Micro-texture Measurements Kodukula, Suresh; Manninen, Timo; Porter, David ISIJ International, Vol. 61, Issue 1 https://doi.org/10.2355/isijinternational.ISIJINT-2020-256	journal	January 2021

Similar Records

Slip band characteristics in the presence of grain boundaries in nickel-based superalloy

Journal Article · 2020 · Acta Materialia · OSTI ID:1802427

Sperry, Ryan; Harte, Allan; Quinta da Fonseca, João; +3 more

Comparison of EBSD, DIC, AFM, and ECCI for active slip system identification in deformed Ti-7Al

Journal Article · 2021 · Materials Characterization · OSTI ID:1865469

Sperry, Ryan; Han, Songyang; Chen, Zhe; +3 more

An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM

Journal Article · 2019 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1603227

Hansen, Landon T.; Fullwood, David T.; Homer, Eric R.; +5 more

Title: Mesoscale slip behavior in single crystal and bicrystal tantalum

Citation Formats

References (51)

Similar Records

Related Subjects