The physics basis to integrate an MHD stable, high-power hybrid scenario to a cool divertor for steady-state reactor operation

Journal Article · 12 February 2023 · Nuclear Fusion

DOI: https://doi.org/10.1088/1741-4326/acb370 · OSTI ID:1924367

Turco, F. ; Petrie, T.; Osborne, T.; Petty, C. C. ; Luce, T. C.; Grierson, B. ; Odstrcil, T. ; Van Zeeland, M. A. ; Liu, D.; Casali, L. ; Boyes, W. ; Smith, S. P.; Shen, H.; Kostuk, M.; Brennan, D.

Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q ₉₅ and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H _98y2 = 1.7, f _GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.

• Research Organization: General Atomics, San Diego, CA (United States)
• Sponsoring Organization: USDOE; USDOE Office of Science (SC), Fusion Energy Sciences (FES)
• Grant/Contract Number: FC02-04ER54698; FG02-04ER54761; SC0020337; SC0023100
• OSTI ID: 1924367
• Journal Information: Nuclear Fusion, Journal Name: Nuclear Fusion Journal Issue: 3 Vol. 63; ISSN 0029-5515
• Publisher: IOP PublishingCopyright Statement
• Country of Publication: IAEA
• Language: English