Title: Effect of bimetallic modification on blast furnace slag and its application in low‐temperature selective catalytic reduction

Journal Article · · Journal of Chemical Technology and Biotechnology
DOI: https://doi.org/10.1002/jctb.7298 · OSTI ID:1908382
 [1];  [2];  [3];  [4];  [2];  [2];  [2]
  1. Xi'an University of Science and Technology Xi'an China, Key Laboratory of Coal Resources Exploration and Comprehensive Utilization Ministry of Natural Resources Xi'an China, Shaanxi Bo Shi Yi San New Material Environmental Protection and Technology Co. Ltd Xi'an China
  2. Xi'an University of Science and Technology Xi'an China
  3. School of Water Resources and Hydroelectric Engineering Xi'an University of Technology Xi'an China
  4. China National Heavy Machinery Research Institute Co. Ltd Xi'an China

Abstract Objective In order to control NO x in low‐temperature flue gases emitted from non‐power industries and to reduce the preparation cost of denitration catalysts, this study uses inexpensive blast furnace slag as raw material to prepare denitration catalysts. Methods After cooling, drying and grinding, the blast furnace slag becomes a powder with considerable fineness and meets the requirements of activity index, which is called GGBS (ground granulated blast furnace slag). Using GGBS as denitration catalyst carrier, the active components M (M = Fe, Co, Ni, Cu and Ce) are loaded on Mn‐based GGBS catalyst using an impregnation method. Conclusions The effect of different active components on the denitration performance and sulfur resistance of Mn‐based GGBS catalysts is investigated. The results show that the Mn‐Ce/GGBS catalyst has better denitration performance and sulfur resistance. The Mn‐Ce/GGBS catalyst has a significant denitration performance when load ratio is 2:1. The active component Ce improves the denitration performance of the catalyst, reduces sulfur poisoning and extends the life of the catalyst. The SO 2 in the flue gas increases the acid sites on the catalyst surface and improves catalyst activity. The larger the ratios of Mn 4+ /Mn 3+ , Ce 4+ /Ce 3+ and O α /O β , the stronger the catalyst activity and the better the denitration performance. © 2022 Society of Chemical Industry (SCI).

Sponsoring Organization:
USDOE
OSTI ID:
1908382
Journal Information:
Journal of Chemical Technology and Biotechnology, Journal Name: Journal of Chemical Technology and Biotechnology Journal Issue: 4 Vol. 98; ISSN 0268-2575
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
United Kingdom
Language:
English

References (38)

Mechanism by which Tungsten Oxide Promotes the Activity of Supported V 2 O 5 /TiO 2 Catalysts for NO X Abatement: Structural Effects Revealed by 51 V MAS NMR Spectroscopy journal September 2019
Shear Stress on the Structure Control of a Supported Fly Ash‐Based Catalyst and Its Application in SCR* Denitration journal August 2021
Application and removal mechanism of ZnO/bentonite desulfurizer in the dry desulfurization journal January 2022
Preparation of MnO2@CeO2 core–shell catalyst and its application in SCO denitration performance journal June 2022
Decomposition of NO in automobile exhaust by plasma–photocatalysis synergy journal July 2013
Existing forms and changes of nitrogen inside of horizontal subsurface constructed wetlands journal October 2017
MnOx-CuOx cordierite catalyst for selective catalytic oxidation of the NO at low temperature journal April 2020
Improvement of NOX Reduction Rate of Urea SCR System Applied for an Non-Road Diesel Engine journal September 2019
Spinel structured CoaMnbOx mixed oxide catalyst for the selective catalytic reduction of NOx with NH3 journal February 2018
Smog analysis and its effect on reported ocular surface diseases: A case study of 2016 smog event of Lahore journal February 2019
Nitrate isotopic composition of sequential Hurricane Harvey wet deposition: Low latitude NOx sources and oxidation chemistry journal October 2020
Volatile–char interactions during biomass pyrolysis: Cleavage of C–C bond in a β–5 lignin model dimer by amino-modified graphitized carbon nanotube journal July 2020
Comparison of Cu-Mg-Al-Ox and Cu/Al2O3 in selective catalytic oxidation of ammonia (NH3-SCO) journal May 2018
Preparation of structured catalysts with Ni and Ni–Rh/CeO2 catalytic layers for syngas production by biogas reforming processes journal September 2016
Co-pyrolytic mechanisms, kinetics, emissions and products of biomass and sewage sludge in N2, CO2 and mixed atmospheres journal October 2020
A high-safety and multifunctional MOFs modified aramid nanofiber separator for lithium-sulfur batteries journal May 2021
Study on catalytic co-pyrolysis of physical mixture/staged pyrolysis characteristics of lignite and straw over an catalytic beds of char and its mechanism journal April 2018
Study on dry desulfurization performance of MnOx hydrothermally loaded halloysite desulfurizer journal May 2022
Characterization of the products obtained by pyrolysis of oil sludge with steel slag in a continuous pyrolysis-magnetic separation reactor journal November 2019
Plasma-enhanced NOx remediation using nanosecond pulsed discharges in a water aerosol matrix journal November 2020
Syngas production by steam and oxy-steam reforming of biogas on monolith-supported CeO2-based catalysts journal June 2018
Investigation on the thermal behavior characteristics and products composition of four pulverized coals: Its potential applications in coal cleaning journal September 2019
Study on solid waste pyrolysis coke catalyst for catalytic cracking of coal tar journal July 2020
Catalytic reforming of volatiles from co-pyrolysis of lignite blended with corn straw over three different structures of iron ores journal November 2019
Effects of demineralization on the surface morphology, microcrystalline and thermal transformation characteristics of coal journal January 2020
Preparation of soybean oil factory sludge catalyst and its application in selective catalytic oxidation denitration process journal July 2019
An application of green surfactant synergistically metal supported cordierite catalyst in denitration of Selective Catalytic Oxidation journal March 2020
Co-combustion of textile dyeing sludge with cattle manure: Assessment of thermal behavior, gaseous products, and ash characteristics journal April 2020
Pyrolysis of municipal solid waste with iron-based additives: A study on the kinetic, product distribution and catalytic mechanisms journal June 2020
Plasma assisted Cu-Mn mixed oxide catalysts for trichloroethylene abatement in moist air journal November 2019
Effect of Ce doping into V 2 O 5 -WO 3 /TiO 2 catalysts on the selective catalytic reduction of NO x by NH 3 journal December 2017
Effective removal of automobile exhausts over flower-like Ce1−Cu O2 nanocatalysts exposed active {100} plane journal June 2018
CFD simulation of combustible solid waste pyrolysis in a fluidized bed reactor journal February 2020
Smart formaldehyde detection enabled by metal organic framework-derived doped electrospun hollow nanofibers journal January 2021
Mini-Review on Char Catalysts for Tar Reforming during Biomass Gasification: The Importance of Char Structure journal December 2019
Surfactant assisted synthesis of hierarchical porous metal-organic frameworks nanosheets journal August 2019
Plasma and catalyst for the oxidation of NOx journal February 2018
Measurement of automobile N2O from bag and continuous stream by quantum cascade laser spectroscopy journal January 2018