Local strain release due to microcracking in laser melted tungsten

Vrancken, Bey; Ganeriwala, Rishi; Matthews, Manyalibo

doi:10.1016/j.procir.2022.08.139

Title: Local strain release due to microcracking in laser melted tungsten

Journal Article · 31 December 2021 · Procedia CIRP

DOI: https://doi.org/10.1016/j.procir.2022.08.139 · OSTI ID:1899176

Vrancken, Bey; Ganeriwala, Rishi; Matthews, Manyalibo

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC52-07NA27344

OSTI ID:: 1899176

Journal Information:: Procedia CIRP, Journal Name: Procedia CIRP Journal Issue: C Vol. 111; ISSN 2212-8271

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (15)

A new finite element model for welding heat sources Goldak, John; Chakravarti, Aditya; Bibby, Malcolm Metallurgical Transactions B, Vol. 15, Issue 2 https://doi.org/10.1007/BF02667333	journal	June 1984
A review of tungsten fabricated via laser powder bed fusion Li, Kai-Lun; Chen, Jin-Han; Zhao, Cong-Cong Tungsten, Vol. 3, Issue 2 https://doi.org/10.1007/s42864-021-00089-3	journal	May 2021
Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: Experiment and simulation Vrancken, Bey; Ganeriwala, Rishi K.; Matthews, Manyalibo J. Acta Materialia, Vol. 194 https://doi.org/10.1016/j.actamat.2020.04.060	journal	August 2020
Evaluation of a thermomechanical model for prediction of residual stress during laser powder bed fusion of Ti-6Al-4V Ganeriwala, R. K.; Strantza, M.; King, W. E. Additive Manufacturing, Vol. 27 https://doi.org/10.1016/j.addma.2019.03.034	journal	May 2019
Microcrack mitigation during laser scanning of tungsten via preheating and alloying strategies Vrancken, Bey; Ganeriwala, Rishi K.; Martin, Aiden A. Additive Manufacturing, Vol. 46 https://doi.org/10.1016/j.addma.2021.102158	journal	October 2021
Selective laser melting of tungsten and tungsten alloys Iveković, Aljaž; Omidvari, Neda; Vrancken, Bey International Journal of Refractory Metals and Hard Materials, Vol. 72 https://doi.org/10.1016/j.ijrmhm.2017.12.005	journal	April 2018
Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix Li, Kailun; Wang, Dianzheng; Xing, Leilei International Journal of Refractory Metals and Hard Materials, Vol. 79 https://doi.org/10.1016/j.ijrmhm.2018.11.013	journal	February 2019
Molybdenum and tungsten manufactured by selective laser melting: Analysis of defect structure and solidification mechanisms Braun, J.; Kaserer, L.; Stajkovic, J. International Journal of Refractory Metals and Hard Materials, Vol. 84 https://doi.org/10.1016/j.ijrmhm.2019.104999	journal	November 2019
Fully dense and crack free molybdenum manufactured by Selective Laser Melting through alloying with carbon Kaserer, L.; Braun, J.; Stajkovic, J. International Journal of Refractory Metals and Hard Materials, Vol. 84 https://doi.org/10.1016/j.ijrmhm.2019.105000	journal	November 2019
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy Carter, Luke N.; Martin, Christopher; Withers, Philip J. Journal of Alloys and Compounds, Vol. 615 https://doi.org/10.1016/j.jallcom.2014.06.172	journal	December 2014
Cracking in laser additively manufactured W: Initiation mechanism and a suppression approach by alloying Wang, Dianzheng; Wang, Zhimin; Li, Kailun Materials & Design, Vol. 162 https://doi.org/10.1016/j.matdes.2018.12.010	journal	January 2019
Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 ∘C Müller, A. v.; Schlick, G.; Neu, R. Nuclear Materials and Energy, Vol. 19 https://doi.org/10.1016/j.nme.2019.02.034	journal	May 2019
3D printing of high-strength aluminium alloys Martin, John H.; Yahata, Brennan D.; Hundley, Jacob M. Nature, Vol. 549, Issue 7672 https://doi.org/10.1038/nature23894	journal	September 2017
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing Ly, Sonny; Rubenchik, Alexander M.; Khairallah, Saad A. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-04237-z	journal	June 2017
Direct measurements of laser absorptivity during metal melt pool formation associated with powder bed fusion additive manufacturing processes Matthews, Manyalibo; Trapp, Johannes; Guss, Gabe Journal of Laser Applications, Vol. 30, Issue 3 https://doi.org/10.2351/1.5040636	journal	August 2018

Similar Records

In-situ characterization of tungsten microcracking in Selective Laser Melting

Conference · 2018 · OSTI ID:1469457

Vrancken, B; King, W E; Matthews, M J

Microcrack mitigation during laser scanning of tungsten via preheating and alloying strategies

Journal Article · 2021 · Additive Manufacturing · OSTI ID:1814654

Vrancken, Bey; Ganeriwala, Rishi K.; Martin, Aiden A.; +1 more

Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: Experiment and simulation

Journal Article · 2020 · Acta Materialia · OSTI ID:1776999

Vrancken, Bey; Ganeriwala, Rishi K.; Matthews, Manyalibo J.

Title: Local strain release due to microcracking in laser melted tungsten

Citation Formats

References (15)

Similar Records

Related Subjects