In-Situ Observation of FCC→HCP Transformation-Induced Plasticity Behavior During Dynamic Deformation of CoCrNi Multi-principal Element Alloys

Copley, J. A.; Coury, F. G.; Ellyson, B.; Klemm-Toole, J.; Frishkoff, J.; Finfrock, C.; Fisher, Z.; Kedir, N.; Kirk, C.; Chen, W.; Parab, N.; Sun, T.; Fezzaa, K.; Clarke, K. D.; Clarke, A. J.

doi:10.1007/s11661-022-06636-y

Title: In-Situ Observation of FCC→HCP Transformation-Induced Plasticity Behavior During Dynamic Deformation of CoCrNi Multi-principal Element Alloys

Journal Article · 06 March 2022 · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

DOI: https://doi.org/10.1007/s11661-022-06636-y · OSTI ID:1894926

Copley, J. A. ^[1]; Coury, F. G. ^[2]; Ellyson, B. ^[1]; Klemm-Toole, J. ^[1]; Frishkoff, J. ^[1]; Finfrock, C. ^[1]; Fisher, Z. ^[1]; Kedir, N. ^[3]; Kirk, C. ^[3]; Chen, W. ^[3]; Parab, N. ^[4]; Sun, T. ^[5]; Fezzaa, K. ^[6]; Clarke, K. D. ^[1]; Clarke, A. J. ^[1]

Colorado School of Mines, Golden, CO (United States)
Federal Univ. of Sao Carlos, Sao Paulo (Brazil)
Purdue Univ., West Lafayette, IN (United States)
Intel Co., Hillsboro, OR (United States)
Univ. of Virginia, Charlottesville, VA (United States)
Argonne National Lab. (ANL), Argonne, IL (United States)

CoCrNi multi-principal element alloys (MPEAs) have potential as high toughness, blast resistant materials, but limited studies of their high strain rate behavior have been performed. Their high toughness has been attributed to low stacking fault energies and the activation of toughness enhancing deformation mechanisms, such as twinning- and transformation-induced plasticity (TWIP and TRIP, respectively), that may be affected by increased strain rate. This work examines a series of CoCrNi MPEAs tested with a miniaturized pressure bar, while simultaneous synchrotron x-ray diffraction and imaging are performed, and compares these results to those collected during quasi-static deformation at elevated temperatures. Here, the collected diffraction indicates that TRIP was active at elevated strain rates for the most Co-rich alloys containing 50 or 55 at. pct. Co, while TRIP behavior was suppressed at elevated strain rates in a 40 at. pct. Co alloy anticipated to experience TRIP. The suppression of TRIP in the lower Co alloy at high strain rates is attributed to adiabatic heating, consistent with suppression of TRIP as a result of elevated temperatures.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq); National Science Foundation (NSF); US Department of the Navy, Office of Naval Research (ONR); USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities Division

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1894926

Journal Information:: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 5 Vol. 53; ISSN 1073-5623

Publisher:: ASM InternationalCopyright Statement

Country of Publication:: United States

Language:: English

References (47)

Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes Yeh, J.-W.; Chen, S.-K.; Lin, S.-J. Advanced Engineering Materials, Vol. 6, Issue 5, p. 299-303 https://doi.org/10.1002/adem.200300567	journal	May 2004
The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels Liu, Li; He, Binbin; Huang, Mingxin Advanced Engineering Materials, Vol. 20, Issue 6 https://doi.org/10.1002/adem.201701083	journal	March 2018
Effect of the possible fcc stabilizers Mn, Fe, and Ni on the high-temperature oxidation of Co-Cr alloys Irving, G. N.; Stringer, J.; Whittle, D. P. Oxidation of Metals, Vol. 8, Issue 6 https://doi.org/10.1007/BF00603389	journal	December 1974
Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical Behavior Hecker, S. S.; Stout, M. G.; Staudhammer, K. P. Metallurgical Transactions A, Vol. 13, Issue 4 https://doi.org/10.1007/BF02644427	journal	April 1982
Stress-Assisted and strain-induced martensites in FE-NI-C alloys Maxwell, P. C.; Goldberg, A.; Shyne, J. C. Metallurgical and Materials Transactions B, Vol. 5, Issue 6 https://doi.org/10.1007/BF02646613	journal	June 1974
Martensite start temperature and the austenite grain-size Guimarães, J. R. C.; Rios, P. R. Journal of Materials Science, Vol. 45, Issue 4 https://doi.org/10.1007/s10853-009-4044-0	journal	February 2010
Effects of Stacking Fault Energy on Deformation Mechanisms in Al-Added Medium Mn TWIP Steel Kalsar, Rajib; Khandal, Priyanka; Suwas, Satyam Metallurgical and Materials Transactions A, Vol. 50, Issue 8 https://doi.org/10.1007/s11661-019-05274-1	journal	May 2019
Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and CoCrFeMnNi High-Entropy Alloys Shabani, Mitra; Indeck, Joseph; Hazeli, Kavan Journal of Materials Engineering and Performance, Vol. 28, Issue 7 https://doi.org/10.1007/s11665-019-04176-y	journal	June 2019
Effects of Adiabatic Heating and Strain Rate on the Dynamic Response of a CoCrFeMnNi High-Entropy Alloy Soares, G. C.; Patnamsetty, M.; Peura, P. Journal of Dynamic Behavior of Materials, Vol. 5, Issue 3 https://doi.org/10.1007/s40870-019-00215-w	journal	July 2019
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory Pierce, D. T.; Jiménez, J. A.; Bentley, J. Acta Materialia, Vol. 68 https://doi.org/10.1016/j.actamat.2014.01.001	journal	April 2014
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy Laurent-Brocq, Mathilde; Akhatova, Alfiya; Perrière, Loïc Acta Materialia, Vol. 88 https://doi.org/10.1016/j.actamat.2015.01.068	journal	April 2015
Design of a twinning-induced plasticity high entropy alloy Deng, Y.; Tasan, C. C.; Pradeep, K. G. Acta Materialia, Vol. 94 https://doi.org/10.1016/j.actamat.2015.04.014	journal	August 2015
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation Pierce, D. T.; Jiménez, J. A.; Bentley, J. Acta Materialia, Vol. 100 https://doi.org/10.1016/j.actamat.2015.08.030	journal	November 2015
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi Laplanche, G.; Kostka, A.; Reinhart, C. Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.036	journal	April 2017
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior Li, Zhiming; Tasan, Cemal Cem; Pradeep, Konda Gokuldoss Acta Materialia, Vol. 131 https://doi.org/10.1016/j.actamat.2017.03.069	journal	June 2017
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy Miao, J.; Slone, C. E.; Smith, T. M. Acta Materialia, Vol. 132 https://doi.org/10.1016/j.actamat.2017.04.033	journal	June 2017
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity Li, Zhiming; Körmann, Fritz; Grabowski, Blazej Acta Materialia, Vol. 136 https://doi.org/10.1016/j.actamat.2017.07.023	journal	September 2017
Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction Wang, Yiqiang; Liu, Bin; Yan, Kun Acta Materialia, Vol. 154 https://doi.org/10.1016/j.actamat.2018.05.013	journal	August 2018
Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy Slone, C. E.; Chakraborty, S.; Miao, J. Acta Materialia, Vol. 158 https://doi.org/10.1016/j.actamat.2018.07.028	journal	October 2018
High-throughput solid solution strengthening characterization in high entropy alloys Coury, Francisco Gil; Wilson, Paul; Clarke, Kester D. Acta Materialia, Vol. 167 https://doi.org/10.1016/j.actamat.2019.01.029	journal	April 2019
Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling Zhang, T. W.; Ma, S. G.; Zhao, D. International Journal of Plasticity, Vol. 124 https://doi.org/10.1016/j.ijplas.2019.08.013	journal	January 2020
Effects of temperature and strain rate on the tensile properties of potassium-doped tungsten Sasaki, Kenta; Yabuuchi, Kiyohiro; Nogami, Shuhei Journal of Nuclear Materials, Vol. 461 https://doi.org/10.1016/j.jnucmat.2015.03.015	journal	June 2015
Microstructural development in equiatomic multicomponent alloys Cantor, B.; Chang, I. T. H.; Knight, P. Materials Science and Engineering: A, Vol. 375-377 https://doi.org/10.1016/j.msea.2003.10.257	journal	July 2004
Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy Joo, S. -H.; Kato, H.; Jang, M. J. Materials Science and Engineering: A, Vol. 689 https://doi.org/10.1016/j.msea.2017.02.043	journal	March 2017
Deformation and annealing behaviors of as-cast non-equiatomic high entropy alloy Tu, Jian; Liu, Lei; Dou, Yuchen Materials Science and Engineering: A, Vol. 737 https://doi.org/10.1016/j.msea.2018.08.109	journal	November 2018
Effects of alloying on deformation twinning in high entropy alloys Li, Wei; Fan, Haidong; Tang, Jing Materials Science and Engineering: A, Vol. 763 https://doi.org/10.1016/j.msea.2019.138143	journal	August 2019
Novel 1.4 GPa-strength medium-Mn steel with uncompromised high ductility Yan, Shu; Liang, Taosha; Wang, Zhiqiang Materials Science and Engineering: A, Vol. 773 https://doi.org/10.1016/j.msea.2019.138732	journal	January 2020
A model for the grain size dependent work hardening of copper Sinclair, C. W.; Poole, W. J.; Bréchet, Y. Scripta Materialia, Vol. 55, Issue 8 https://doi.org/10.1016/j.scriptamat.2006.05.018	journal	October 2006
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy Huang, Shuo; Li, Wei; Lu, Song Scripta Materialia, Vol. 108 https://doi.org/10.1016/j.scriptamat.2015.05.041	journal	November 2015
Design and in-situ characterization of a strong and ductile co-rich multicomponent alloy with transformation induced plasticity Coury, Francisco Gil; Santana, Diego; Guo, Yaofeng Scripta Materialia, Vol. 173 https://doi.org/10.1016/j.scriptamat.2019.07.045	journal	December 2019
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off Li, Zhiming; Pradeep, Konda Gokuldoss; Deng, Yun Nature, Vol. 534, Issue 7606 https://doi.org/10.1038/nature17981	journal	May 2016
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi Zhang, ZiJiao; Mao, M. M.; Wang, Jiangwei Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms10143	journal	December 2015
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures Gludovatz, Bernd; Hohenwarter, Anton; Thurston, Keli V. S. Nature Communications, Vol. 7, Issue 1 https://doi.org/10.1038/ncomms10602	journal	February 2016
Novel 1.5 GPa-strength with 50%-ductility by transformation-induced plasticity of non-recrystallized austenite in duplex steels Sohn, Seok Su; Song, Hyejin; Jo, Min Chul Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-01514-9	journal	April 2017
High Throughput Discovery and Design of Strong Multicomponent Metallic Solid Solutions Coury, Francisco G.; Clarke, Kester D.; Kiminami, Claudio S. Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-26830-6	journal	June 2018
FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35−x medium-entropy alloys Jo, Y. H.; Choi, W. M.; Kim, D. G. Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-019-39570-y	journal	February 2019
Generalized stacking fault energies, ductilities, and twinnabilities of Ni and selected Ni alloys Siegel, Donald J. Applied Physics Letters, Vol. 87, Issue 12 https://doi.org/10.1063/1.2051793	journal	September 2005
High speed synchrotron x-ray phase contrast imaging of dynamic material response to split Hopkinson bar loading Hudspeth, M.; Claus, B.; Dubelman, S. Review of Scientific Instruments, Vol. 84, Issue 2 https://doi.org/10.1063/1.4789780	journal	February 2013
Stacking fault energies of Ni–Co–Cr alloys Köster, E. H.; Thölén, A. R.; Howie, A. Philosophical Magazine, Vol. 10, Issue 108 https://doi.org/10.1080/14786436408225417	journal	December 1964
Shock compression response of high entropy alloys Jiang, Z. J.; He, J. Y.; Wang, H. Y. Materials Research Letters, Vol. 4, Issue 4 https://doi.org/10.1080/21663831.2016.1191554	journal	May 2016
Effect of stacking fault energy on mechanism of plastic deformation in nanotwinned FCC metals Borovikov, Valery; Mendelev, Mikhail I.; King, Alexander H. Modelling and Simulation in Materials Science and Engineering, Vol. 23, Issue 5 https://doi.org/10.1088/0965-0393/23/5/055003	journal	May 2015
HiSPoD : a program for high-speed polychromatic X-ray diffraction experiments and data analysis on polycrystalline samples Sun, Tao; Fezzaa, Kamel Journal of Synchrotron Radiation, Vol. 23, Issue 4 https://doi.org/10.1107/S1600577516005804	journal	June 2016
A fracture-resistant high-entropy alloy for cryogenic applications Gludovatz, B.; Hohenwarter, A.; Catoor, D. Science, Vol. 345, Issue 6201 https://doi.org/10.1126/science.1254581	journal	September 2014
High-Strain-Rate Deformation: Mechanical Behavior and Deformation Substructures Induced (Rusty) Gray, George T. Annual Review of Materials Research, Vol. 42, Issue 1 https://doi.org/10.1146/annurev-matsci-070511-155034	journal	August 2012
Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels Bouaziz, O.; Zurob, H.; Chehab, B. Materials Science and Technology, Vol. 27, Issue 3 https://doi.org/10.1179/026708309X12535382371852	journal	March 2011
Effects of Austenite Grain Size on ε Martensitic Transformation in Fe-15mass%Mn Alloy Takaki, Setsuo; Nakatsu, Hideshi; Tokunaga, Youichi Materials Transactions, JIM, Vol. 34, Issue 6 https://doi.org/10.2320/matertrans1989.34.489	journal	January 1993
The Effect of Strain Rate on the Sheet Tensile Properties and Formability of Ferritic Stainless Steels Clarke, K. D.; Comstock, R. J.; Mataya, M. C. SAE Technical Paper Series https://doi.org/10.4271/2003-01-0526	conference	March 2003

Similar Records

Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation

Journal Article · 2022 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:2019553

Ellyson, B.; Fezzaa, K.; Sun, T.; +16 more

A critical assessment of deformation twinning and epsilon martensite formation in austenitic alloys during complex forming operations

Journal Article · 2018 · Materials Characterization · OSTI ID:22805872

Weiss, Matthias; Mester, Katrin; Taylor, Adam; +1 more

Design metastability in high-entropy alloys by tailoring unstable fault energies

Journal Article · 2022 · Science Advances · OSTI ID:1982948

Wang, Xin; De Vecchis, Rafael Rodriguez; Li, Chenyang; +6 more

Related Subjects

36 MATERIALS SCIENCE

Title: In-Situ Observation of FCC→HCP Transformation-Induced Plasticity Behavior During Dynamic Deformation of CoCrNi Multi-principal Element Alloys

Citation Formats

References (47)

Similar Records

Related Subjects