Transient creep‐fatigue crack growth in creep‐brittle materials: Application to Alloy 718

Pribe, Joshua D.; Ostergaard, Halsey E.; Siegmund, Thomas; Kruzic, Jamie J.

doi:10.1111/ffe.13788

Title: Transient creep‐fatigue crack growth in creep‐brittle materials: Application to Alloy 718

Journal Article · 14 July 2022 · Fatigue and Fracture of Engineering Materials and Structures

DOI: https://doi.org/10.1111/ffe.13788 · OSTI ID:1876460

Pribe, Joshua D. ^[1]; Ostergaard, Halsey E. ^[2]; Siegmund, Thomas ^[3]; Kruzic, Jamie J. ^[4]

School of Mechanical Engineering Purdue University West Lafayette IN USA, National Institute of Aerospace Hampton VA US
School of Mechanical and Manufacturing Engineering University of New South Wales (UNSW Sydney) Sydney New South Wales Australia, School of Civil Engineering The University of Sydney Sydney New South Wales Australia
School of Mechanical Engineering Purdue University West Lafayette IN USA
School of Mechanical and Manufacturing Engineering University of New South Wales (UNSW Sydney) Sydney New South Wales Australia

Abstract This study presents incremental finite element computations of creep‐fatigue crack growth in Alloy 718 at in air. Alloy 718 is representative of creep‐brittle materials, in which viscoplastic deformation is restricted near the tip of a growing crack. The computations predict crack growth using a unique combination of an irreversible cohesive zone formulation and a strain gradient viscoplastic material model based on the Kocks–Mecking formulation. Cohesive zone damage parameters are estimated using sustained loading and constant‐amplitude cyclic loading experiments. Computations of crack extension under three different waveforms containing overloads all predict post‐overload retardation. The amount of retardation depends strongly on the overload ratio, consistent with experiments in the literature using similar waveforms. Analysis of the crack‐tip fields demonstrates retardation is associated with unloading in the highly deformed material near the advancing crack tip. Dynamic recovery and geometrically necessary dislocations are shown to significantly influence post‐overload crack extension.

View Journal Article

Cite

Export

Save

Research Organization:: Purdue Univ., West Lafayette, IN (United States)

Sponsoring Organization:: USDOE; USDOE Office of Fossil Energy and Carbon Management (FECM)

Grant/Contract Number:: FE0011796

OSTI ID:: 1876460

Journal Information:: Fatigue and Fracture of Engineering Materials and Structures, Journal Name: Fatigue and Fracture of Engineering Materials and Structures Journal Issue: 10 Vol. 45; ISSN 8756-758X

Publisher:: Wiley-BlackwellCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (63)

Creep crack growth by grain boundary cavitation: crack tip fields and crack growth rates under transient conditions Li, F. Z.; Needleman, A.; Shih, C. F. International Journal of Fracture, Vol. 38, Issue 4 https://doi.org/10.1007/BF00019803	journal	December 1988
Frequency and wave-form effects on the fatigue crack growth behavior of alloy 718 at 298 K and 823 K Clavel, M.; Pineau, A. Metallurgical Transactions A, Vol. 9, Issue 4 https://doi.org/10.1007/BF02646402	journal	April 1978
The relation between polycrystal deformation and single-crystal deformation Kocks, U. F. Metallurgical and Materials Transactions B, Vol. 1, Issue 5 https://doi.org/10.1007/BF02900224	journal	May 1970
A numerical analysis of constraint effects in fatigue crack growth by use of an irreversible cohesive zone model Wang, B.; Siegmund, T. International Journal of Fracture, Vol. 132, Issue 2 https://doi.org/10.1007/s10704-005-0627-1	journal	March 2005
Creep and creep–fatigue crack growth Saxena, Ashok International Journal of Fracture, Vol. 191, Issue 1-2 https://doi.org/10.1007/s10704-015-9994-4	journal	February 2015
High-temperature fatigue crack growth under transient overloading: application to Alloy 617 Pribe, Joshua D.; Addison, Dylan A.; Siegmund, Thomas International Journal of Fracture, Vol. 232, Issue 1 https://doi.org/10.1007/s10704-021-00588-x	journal	August 2021
Creep–Environment Interactions in Dwell-Fatigue Crack Growth of Nickel Based Superalloys Maciejewski, Kimberly; Dahal, Jinesh; Sun, Yaofeng Metallurgical and Materials Transactions A, Vol. 45, Issue 5 https://doi.org/10.1007/s11661-014-2199-z	journal	February 2014
Time-Dependent Crack Growth Thresholds of Ni-Base Superalloys Chan, Kwai S. Metallurgical and Materials Transactions A, Vol. 45, Issue 8 https://doi.org/10.1007/s11661-014-2271-8	journal	April 2014
A Grain Boundary Fracture Model for Predicting Dynamic Embrittlement and Oxidation-Induced Cracking in Superalloys Chan, Kwai S. Metallurgical and Materials Transactions A, Vol. 46, Issue 6 https://doi.org/10.1007/s11661-015-2860-1	journal	March 2015
Some geometrical relations in dislocated crystals Nye, J. F. Acta Metallurgica, Vol. 1, Issue 2 https://doi.org/10.1016/0001-6160(53)90054-6	journal	March 1953
Kinetics of flow and strain-hardening Mecking, H.; Kocks, U. F. Acta Metallurgica, Vol. 29, Issue 11 https://doi.org/10.1016/0001-6160(81)90112-7	journal	November 1981
A unified phenomenological description of work hardening and creep based on one-parameter models Estrin, Y.; Mecking, H. Acta Metallurgica, Vol. 32, Issue 1 https://doi.org/10.1016/0001-6160(84)90202-5	journal	January 1984
Hold-time effect of a single overload on crack retardation at elevated temperature Gemma, A. E. Engineering Fracture Mechanics, Vol. 11, Issue 4 https://doi.org/10.1016/0013-7944(79)90135-8	journal	January 1979
The effects of overloads on sustained-load crack growth in a nickel-base superalloy: part I—analysis Nicholas, T.; Haritos, G. K.; Hastie, R. L. Theoretical and Applied Fracture Mechanics, Vol. 16, Issue 1 https://doi.org/10.1016/0167-8442(91)90039-M	journal	October 1991
The effects of overloads on sustained-load crack growth in a nickel-base superalloy: part II—experiments Nicholas, T.; Haritos, G. K.; Hastie, R. L. Theoretical and Applied Fracture Mechanics, Vol. 16, Issue 1 https://doi.org/10.1016/0167-8442(91)90040-Q	journal	October 1991
Intergranular crack tip oxidation mechanism in a nickel-based superalloy Andrieu, E.; Molins, R.; Ghonem, H. Materials Science and Engineering: A, Vol. 154, Issue 1 https://doi.org/10.1016/0921-5093(92)90358-8	journal	June 1992
Dislocation-Density–Related Constitutive Modeling Estrin, Yuri Unified Constitutive Laws of Plastic Deformation https://doi.org/10.1016/B978-012425970-6/50003-5	book	January 1996
An irreversible cohesive zone model for interface fatigue crack growth simulation Roe, K. L.; Siegmund, T. Engineering Fracture Mechanics, Vol. 70, Issue 2 https://doi.org/10.1016/S0013-7944(02)00034-6	journal	January 2003
Mechanism-based strain gradient plasticity? I. Theory Gao, H. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 6 https://doi.org/10.1016/S0022-5096(98)00103-3	journal	April 1999
Strain Gradient Plasticity Fleck, N. A.; Hutchinson, J. W. Advances in Applied Mechanics https://doi.org/10.1016/S0065-2156(08)70388-0	book	January 1997
Physics and phenomenology of strain hardening: the FCC case Kocks, U. F.; Mecking, H. Progress in Materials Science, Vol. 48, Issue 3 https://doi.org/10.1016/S0079-6425(02)00003-8	journal	January 2003
Multiaxial constitutive model accounting for the strength-differential in Inconel 718 Iyer, S. International Journal of Plasticity, Vol. 19, Issue 12 https://doi.org/10.1016/S0749-6419(03)00059-7	journal	December 2003
Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures—an example of dynamic embrittlement Pfaendtner, J. A.; McMahon Jr, C. J. Acta Materialia, Vol. 49, Issue 16 https://doi.org/10.1016/S1359-6454(01)00005-2	journal	September 2001
Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature Molins, R.; Hochstetter, G.; Chassaigne, J. C. Acta Materialia, Vol. 45, Issue 2 https://doi.org/10.1016/S1359-6454(96)00192-9	journal	February 1997
Work-hardening in Inconel X-750: study of stage II del Valle, J. A.; Picasso, A. C.; Romero, R. Acta Materialia, Vol. 46, Issue 6 https://doi.org/10.1016/S1359-6454(97)00425-4	journal	March 1998
Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density Arsenlis, A.; Parks, D. M. Acta Materialia, Vol. 47, Issue 5 https://doi.org/10.1016/S1359-6454(99)00020-8	journal	March 1999
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6 Simar, A.; Bréchet, Y.; de Meester, B. Acta Materialia, Vol. 55, Issue 18 https://doi.org/10.1016/j.actamat.2007.07.012	journal	October 2007
Failure of metals II: Fatigue Pineau, André; McDowell, David L.; Busso, Esteban P. Acta Materialia, Vol. 107 https://doi.org/10.1016/j.actamat.2015.05.050	journal	April 2016
Strain gradient plasticity-based modeling of hydrogen environment assisted cracking Martínez-Pañeda, Emilio; Niordson, Christian F.; Gangloff, Richard P. Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.07.022	journal	September 2016
Environmentally enhanced creep crack growth by grain boundary cavitation under cyclic loading Wen, Jian-Feng; Liu, Yu; Srivastava, Ankit Acta Materialia, Vol. 153 https://doi.org/10.1016/j.actamat.2018.04.034	journal	July 2018
A load history dependent model for fatigue crack propagation in Inconel 718 under hold time conditions Lundström, E.; Simonsson, K.; Gustafsson, D. Engineering Fracture Mechanics, Vol. 118 https://doi.org/10.1016/j.engfracmech.2014.02.005	journal	March 2014
A cohesive zone framework for environmentally assisted fatigue del Busto, Susana; Betegón, Covadonga; Martínez-Pañeda, Emilio Engineering Fracture Mechanics, Vol. 185 https://doi.org/10.1016/j.engfracmech.2017.05.021	journal	November 2017
The roles of yield strength mismatch, interface strength, and plastic strain gradients in fatigue crack growth across interfaces Pribe, Joshua D.; Siegmund, Thomas; Kruzic, Jamie J. Engineering Fracture Mechanics, Vol. 235 https://doi.org/10.1016/j.engfracmech.2020.107072	journal	August 2020
A cohesive zone model for fatigue and creep–fatigue crack growth in single crystal superalloys Bouvard, J. L.; Chaboche, J. L.; Feyel, F. International Journal of Fatigue, Vol. 31, Issue 5 https://doi.org/10.1016/j.ijfatigue.2008.11.002	journal	May 2009
Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation Leo Prakash, D. G.; Walsh, M. J.; Maclachlan, D. International Journal of Fatigue, Vol. 31, Issue 11-12 https://doi.org/10.1016/j.ijfatigue.2009.01.023	journal	November 2009
High temperature fatigue crack growth behaviour of Inconel 718 under hold time and overload conditions Gustafsson, D.; Lundström, E. International Journal of Fatigue, Vol. 48 https://doi.org/10.1016/j.ijfatigue.2012.10.018	journal	March 2013
Load and temperature interaction modeling of fatigue crack growth in a Ni-base superalloy Barker, Vincent M.; Steven Johnson, W.; Adair, Benjamin S. International Journal of Fatigue, Vol. 52 https://doi.org/10.1016/j.ijfatigue.2013.03.003	journal	July 2013
Plastic strain gradients and transient fatigue crack growth: A computational study Pribe, Joshua D.; Siegmund, Thomas; Tomar, Vikas International Journal of Fatigue, Vol. 120 https://doi.org/10.1016/j.ijfatigue.2018.11.020	journal	March 2019
A cohesive zone model for thermomechanical fatigue Abraham, Jeffy; Roth, Stephan; Kuna, Meinhard International Journal of Fatigue, Vol. 136 https://doi.org/10.1016/j.ijfatigue.2020.105572	journal	July 2020
Fatigue crack growth mechanisms in powder metallurgy Ni-based superalloys—A review Jiang, R.; Song, Y. D.; Reed, P. A. International Journal of Fatigue, Vol. 141 https://doi.org/10.1016/j.ijfatigue.2020.105887	journal	December 2020
A conventional theory of mechanism-based strain gradient plasticity Huang, Y.; Qu, S.; Hwang, K. C. International Journal of Plasticity, Vol. 20, Issue 4-5 https://doi.org/10.1016/j.ijplas.2003.08.002	journal	April 2004
A dislocation density based strain gradient model Brinckmann, Steffen; Siegmund, Thomas; Huang, Yonggang International Journal of Plasticity, Vol. 22, Issue 9 https://doi.org/10.1016/j.ijplas.2006.01.005	journal	September 2006
Nanoindentation based properties of Inconel 718 at elevated temperatures: A comparison of conventional versus additively manufactured samples Wang, Hao; Dhiman, Abhijeet; Ostergaard, Halsey E. International Journal of Plasticity, Vol. 120 https://doi.org/10.1016/j.ijplas.2019.04.018	journal	September 2019
Interaction of rate- and size-effect using a dislocation density based strain gradient viscoplasticity model Nguyen, Trung N.; Siegmund, Thomas; Tomar, Vikas Journal of the Mechanics and Physics of Solids, Vol. 109 https://doi.org/10.1016/j.jmps.2017.07.022	journal	December 2017
The role of plastic strain gradients in the crack growth resistance of metals Martínez-Pañeda, Emilio; Deshpande, Vikram S.; Niordson, Christian F. Journal of the Mechanics and Physics of Solids, Vol. 126 https://doi.org/10.1016/j.jmps.2019.02.011	journal	May 2019
Microscale modeling of creep deformation and rupture in Nickel-based superalloy IN 617 at high temperature Phan, Van-Tung; Zhang, Xiang; Li, Yumeng Mechanics of Materials, Vol. 114 https://doi.org/10.1016/j.mechmat.2017.08.008	journal	November 2017
Influence of overloads on dwell time fatigue crack growth in Inconel 718 Saarimäki, Jonas; Moverare, Johan; Eriksson, Robert Materials Science and Engineering: A, Vol. 612 https://doi.org/10.1016/j.msea.2014.06.068	journal	August 2014
Thermal–mechanical stress analysis of pressurized water reactor pressure vessel with/without a preexisting crack under grid load following conditions Mohanty, Subhasish; Soppet, William K.; Majumdar, Saurin Nuclear Engineering and Design, Vol. 310 https://doi.org/10.1016/j.nucengdes.2016.09.020	journal	December 2016
A mechanism for stress-aided grain boundary oxidation ahead of cracks Evans, H. E.; Li, H. Y.; Bowen, P. Scripta Materialia, Vol. 69, Issue 2 https://doi.org/10.1016/j.scriptamat.2013.03.026	journal	July 2013
Microstructural modelling of creep crack growth from a blunted crack Onck, P. R.; Van Der Giessen, E. International Journal of Fracture, Vol. 92, Issue 4, p. 373-399 https://doi.org/10.1023/A:1007584732405	journal	August 1998
Critical Assessment 21: oxygen-assisted fatigue crack propagation in turbine disc superalloys Jiang, R.; Reed, P. A. S. Materials Science and Technology, Vol. 32, Issue 5 https://doi.org/10.1080/02670836.2016.1148227	journal	March 2016
Void nucleation by inclusion debonding in a crystal matrix Xu, X. -P; Needleman, A. Modelling and Simulation in Materials Science and Engineering, Vol. 1, Issue 2 https://doi.org/10.1088/0965-0393/1/2/001	journal	January 1993
AN INVESTIGATION OF THE CREEP-FATIGUE-ENVIRONMENT INTERACTION IN A Ni-BASE SUPERALLOY Floreen, S.; Kane, R. H. Fatigue & Fracture of Engineering Materials and Structures, Vol. 2, Issue 4 https://doi.org/10.1111/j.1460-2695.1979.tb01097.x	journal	November 1979
Elevated Temperature Fatigue Crack Growth in Alloy 718?Part ii: Effects of Environmental and Material Variables Ghonem, H.; Nicholas, T.; Pineau, A. Fatigue & Fracture of Engineering Materials and Structures, Vol. 16, Issue 6 https://doi.org/10.1111/j.1460-2695.1993.tb00103.x	journal	June 1993
Elevated Temperature Fatigue Crack Growth in Alloy 718-Part i: Effects of Mechanical Variables Ghonem, H.; Nicholas, T.; Pineau, A. Fatigue & Fracture of Engineering Materials & Structures, Vol. 16, Issue 5 https://doi.org/10.1111/j.1460-2695.1993.tb00767.x	journal	May 1993
Laws for Work-Hardening and Low-Temperature Creep Kocks, U. F. Journal of Engineering Materials and Technology, Vol. 98, Issue 1 https://doi.org/10.1115/1.3443340	journal	January 1976
Effects of Stress Ratio and Hold-Time on Fatigue Crack Growth in Alloy 718 Shahinian, P.; Sadananda, K. Journal of Engineering Materials and Technology, Vol. 101, Issue 3 https://doi.org/10.1115/1.3443681	journal	July 1979
On the Stress Distribution at the Base of a Stationary Crack Williams, M. L. Journal of Applied Mechanics, Vol. 24, Issue 1 https://doi.org/10.1115/1.4011454	journal	March 1957
Strip-Yield Modeling of Load-Time-Temperature Effects on Crack Growth in Engine Materials Newman, James C.; Sullivan, Rani ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, Volume 10B: Structures and Dynamics https://doi.org/10.1115/GT2020-14211	conference	January 2021
A damage-based cohesive zone model of intergranular crack growth in a nickel-based superalloy Sun, Yaofeng; Maciejewski, Kimberly; Ghonem, Hamouda International Journal of Damage Mechanics, Vol. 22, Issue 6 https://doi.org/10.1177/1056789512468917	journal	December 2012
Dynamic Embrittlement — Time–dependent Quasi–brittle Intergranular Fracture at High Temperatures Krupp, U. International Materials Reviews, Vol. 50, Issue 2 https://doi.org/10.1179/174328005X14320	journal	March 2005
High temperature fatigue crack growth in Inconel 718 Antunes, F. V.; Ferreira, J. M.; Branco, C. M. Materials at High Temperatures, Vol. 17, Issue 4 https://doi.org/10.1179/mht.2000.058	journal	November 2000
Temperature and Load Interaction Effects on the Fatigue Crack Growth Rate and Fracture Surface Morphology of IN100 Superalloy Adair, Benjamin S.; Johnson, W. Steven; Antolovich, Stephen D. Journal of ASTM International, Vol. 9, Issue 4 https://doi.org/10.1520/JAI104215	journal	April 2012

Similar Records

New Mechanistic Models of Creep-Fatigue Interactions for Gas Turbine Components (Final Report)

Technical Report · 2018 · OSTI ID:1489645

Siegmund, Thomas; Kruzic, Jamie

Constitutive representation of high-temperature creep damage

Journal Article · 1987 · Int. J. Plast.; (United States) · OSTI ID:6417740

Chan, K S

Creep crack growth in Alloy 718

Journal Article · 1977 · Metall. Trans., A; (United States) · OSTI ID:7218886

Sadananda, K; Shahinian, P

Related Subjects

36 MATERIALS SCIENCE
Engineering
Materials Science
cohesive zone model
creep-fatigue crack growth
elevated temperature
overload
strain gradient viscoplasticity

Title: Transient creep‐fatigue crack growth in creep‐brittle materials: Application to Alloy 718

Citation Formats

References (63)

Similar Records

Related Subjects