Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Cramer, Corson L.; Ionescu, Emanuel; Graczyk-Zajac, Magdalena; Nelson, Andrew T.; Katoh, Yutai; Haslam, Jeffery J.; Wondraczek, Lothar; Aguirre, Trevor G.; LeBlanc, Saniya; Wang, Hsin; Masoudi, Mansour; Tegeler, Ed; Riedel, Ralf; Colombo, Paolo; Minary-Jolandan, Majid

doi:10.1016/j.jeurceramsoc.2022.01.058

Title: Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Journal Article · 06 February 2022 · Journal of the European Ceramic Society

DOI: https://doi.org/10.1016/j.jeurceramsoc.2022.01.058 · OSTI ID:1876331

^[1];

^[2];

^[3];

^[1];

^[1]; Haslam, Jeffery J. ^[4];

^[5];

^[1];

^[6];

^[1]; Masoudi, Mansour ^[7]; Tegeler, Ed ^[7];

^[8]; Colombo, Paolo ^[9];

^[10]

Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Institute for Materials Science, Darmstadt (Germany); Fraunhofer Institution for Materials Recycling and Resource Strategies IWKS, Alzenau (Germany)
ENBW Energie Baden-Württemberg, Karlsruhe (Germany)
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
University of Jena (Germany)
George Washington Univ., Washington, DC (United States)
Emissiol, LLC, Mill Creek, WA (United States)
Institute for Materials Science, Darmstadt (Germany)
Univ. of Padua (Italy); Pennsylvania State Univ., University Park, PA (United States)
Arizona State Univ., Tempe, AZ (United States)

Among engineering materials, ceramics are indispensable in energy applications such as batteries, capacitors, solar cells, smart glass, fuel cells and electrolyzers, nuclear power plants, thermoelectrics, thermoionics, carbon capture and storage, control of harmful emission from combustion engines, piezoelectrics, turbines and heat exchangers, among others. Advances in additive manufacturing (AM) offer new opportunities to fabricate these devices in geometries unachievable previously and may provide higher efficiencies and performance, all at lower costs. This article reviews the state of the art in ceramic materials for various energy applications. The focus of the review is on material selections, processing, and opportunities for AM technologies in energy related ceramic materials manufacturing. The aim of the article is to provide a roadmap for stakeholders such as industry, academia and funding agencies on research and development in additive manufacturing of ceramic materials toward more efficient, cost-effective, and reliable energy systems.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Lawrence Livermore National Laboratory (LLNL), Livermore, CA (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: Carl Zeiss Foundation; German Research Foundation (DFG); National Science Foundation (NSF); US Air Force Office of Scientific Research (AFOSR); USDOE National Nuclear Security Administration (NNSA); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Advanced Manufacturing Office; USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office; USDOE Office of Nuclear Energy (NE); USDOE Office of Science (SC), Fusion Energy Sciences (FES)

Grant/Contract Number:: AC05-00OR22725; AC52-07NA27344

OSTI ID:: 1876331

Report Number(s):: LLNL-JRNL-828965

Journal Information:: Journal of the European Ceramic Society, Journal Name: Journal of the European Ceramic Society Journal Issue: 7 Vol. 42; ISSN 0955-2219

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (219)

Ceramic Matrix Composites: Materials, Modeling and Technology Bansal, Narottam P.; Lamon, Jacques John Wiley & Sons, Inc., Hoboken, New Jersey https://doi.org/10.1002/9781118832998	book	September 2014
Additive Manufacturing of Light Weight Ceramic Matrix Composites For Gas Turbine Engine Applications Singh, Mrityunjay; Halbig, Michael C.; Grady, Joseph E. Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites https://doi.org/10.1002/9781119211662.ch16	book	December 2015
Towards Ultrastrong Glasses Wondraczek, Lothar; Mauro, John C.; Eckert, Jürgen Advanced Materials, Vol. 23, Issue 39 https://doi.org/10.1002/adma.201102795	journal	September 2011
Artificial Microbial Arenas: Materials for Observing and Manipulating Microbial Consortia Wondraczek, Lothar; Pohnert, Georg; Schacher, Felix H. Advanced Materials, Vol. 31, Issue 24 https://doi.org/10.1002/adma.201900284	journal	April 2019
Two‐Photon Polymerization of Nanocomposites for the Fabrication of Transparent Fused Silica Glass Microstructures Kotz, Frederik; Quick, Alexander S.; Risch, Patrick Advanced Materials, Vol. 33, Issue 9 https://doi.org/10.1002/adma.202006341	journal	January 2021
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics Camposeo, Andrea; Persano, Luana; Farsari, Maria Advanced Optical Materials, Vol. 7, Issue 1 https://doi.org/10.1002/adom.201800419	journal	September 2018
Ultrathin Fluidic Laminates for Large-Area Façade Integration and Smart Windows Heiz, Benjamin P. V.; Pan, Zhiwen; Lautenschläger, Gerhard Advanced Science, Vol. 4, Issue 3 https://doi.org/10.1002/advs.201600362	journal	November 2016
Progress Toward High Power Output in Thermionic Energy Converters Campbell, Matthew F.; Celenza, Thomas J.; Schmitt, Felix Advanced Science, Vol. 8, Issue 9 https://doi.org/10.1002/advs.202003812	journal	March 2021
Two-Dimensional Materials for Beyond-Lithium-Ion Batteries Peng, Lele; Zhu, Yue; Chen, Dahong Advanced Energy Materials, Vol. 6, Issue 11 https://doi.org/10.1002/aenm.201600025	journal	March 2016
Additive Manufacturing of Electrochemical Energy Storage Systems Electrodes Soares, Davi Marcelo; Ren, Zhongkan; Mujib, Shakir Bin Advanced Energy and Sustainability Research, Vol. 2, Issue 5 https://doi.org/10.1002/aesr.202000111	journal	March 2021
New and Old Concepts in Thermoelectric Materials Sootsman, Joseph R.; Chung, Duck Young; Kanatzidis, Mercouri G. Angewandte Chemie International Edition, Vol. 48, Issue 46, p. 8616-8639 https://doi.org/10.1002/anie.200900598	journal	November 2009
Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges: REVIEW Orrill, Michael; LeBlanc, Saniya Journal of Applied Polymer Science, Vol. 134, Issue 3 https://doi.org/10.1002/app.44256	journal	September 2016
3D Printing of Electrochemical Energy Storage Devices: A Review of Printing Techniques and Electrode/Electrolyte Architectures Cheng, Meng; Deivanayagam, Ramasubramonian; Shahbazian‐Yassar, Reza Batteries & Supercaps, Vol. 3, Issue 2 https://doi.org/10.1002/batt.201900130	journal	November 2019
Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer Cramer, Corson L.; Armstrong, Herb; Flores‐Betancourt, Alexis International Journal of Ceramic Engineering & Science, Vol. 2, Issue 6 https://doi.org/10.1002/ces2.10070	journal	September 2020
3D printing‐enabled advanced electrode architecture design Chu, Tiankuo; Park, Soyeon; Fu, Kun (Kelvin) Carbon Energy, Vol. 3, Issue 3 https://doi.org/10.1002/cey2.114	journal	May 2021
Preparation of n-type Bi ₂ Te ₃ thermoelectric materials by non-contact dispenser printing combined with selective laser melting : Preparation of n-type Bi2Te3 thermoelectric materials Wu, Keping; Yan, Yonggao; Zhang, Jian physica status solidi (RRL) - Rapid Research Letters, Vol. 11, Issue 6 https://doi.org/10.1002/pssr.201700067	journal	May 2017
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity He, Minhong; Zhao, Yan; Wang, Biao Small, Vol. 11, Issue 44 https://doi.org/10.1002/smll.201502153	journal	October 2015
Ultra-slim flexible glass for roll-to-roll electronic device fabrication Garner, Sean; Glaesemann, Scott; Li, Xinghua Applied Physics A, Vol. 116, Issue 2 https://doi.org/10.1007/s00339-014-8468-2	journal	May 2014
Giant piezoresistivity in polymer-derived amorphous SiAlCO ceramics Cao, Yejie; Yang, Xueping; Zhao, Ran Journal of Materials Science, Vol. 51, Issue 12 https://doi.org/10.1007/s10853-016-9866-y	journal	March 2016
Module Geometry and Contact Resistance of Thermoelectric Generators Analyzed by Multiphysics Simulation Ebling, D.; Bartholomé, K.; Bartel, M. Journal of Electronic Materials, Vol. 39, Issue 9 https://doi.org/10.1007/s11664-010-1331-0	journal	August 2010
Preparation of Ring-Shaped Thermoelectric Legs from PbTe Powders for Tubular Thermoelectric Modules Schmitz, Andreas; Stiewe, Christian; Müller, Eckhard Journal of Electronic Materials, Vol. 42, Issue 7 https://doi.org/10.1007/s11664-012-2402-1	journal	January 2013
Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM) Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo Journal of Materials Engineering and Performance, Vol. 27, Issue 1 https://doi.org/10.1007/s11665-017-2843-z	journal	August 2017
Thermoelectric power generation materials: Technology and application opportunities Fleurial, Jean-Pierre JOM, Vol. 61, Issue 4 https://doi.org/10.1007/s11837-009-0057-z	journal	April 2009
Polymer-derived SiBCN ceramic pressure sensor with excellent sensing performance Shao, Gang; Jiang, Junpeng; Jiang, Mingjie Journal of Advanced Ceramics, Vol. 9, Issue 3 https://doi.org/10.1007/s40145-020-0377-6	journal	June 2020
The construction of the Crystal Houses façade: challenges and innovations Oikonomopoulou, F.; Bristogianni, T.; Veer, F. A. Glass Structures & Engineering, Vol. 3, Issue 1 https://doi.org/10.1007/s40940-017-0039-4	journal	April 2017
The UWMAK-II study: A conceptual design of a helium cooled, solid breeder, Tokamak fusion reactor system Conn, Robert W.; Kulcinski, Gerald L.; Maynard, Charles W. Nuclear Engineering and Design, Vol. 39, Issue 1 https://doi.org/10.1016/0029-5493(76)90121-7	journal	October 1976
Piezoresistance in polysilicon and its applications to strain gauges French, P. J.; Evans, A. G. R. Solid-State Electronics, Vol. 32, Issue 1 https://doi.org/10.1016/0038-1101(89)90041-5	journal	January 1989
The effect of cristobalite seed on the crystallization of fused silica based ceramic core — A kinetic study Wang, Ling-Yi; Hon, Min-Hsiung Ceramics International, Vol. 21, Issue 3 https://doi.org/10.1016/0272-8842(95)90909-3	journal	January 1995
Vacuum thermionic energy converter Beggs, J. E. Advanced Energy Conversion, Vol. 3, Issue 2 https://doi.org/10.1016/0365-1789(63)90062-6	journal	April 1963
Preparation of thermal barrier coatings for gas turbine blades by EB-PVD Xu, Huibin; Gong, Shengkai; Deng, Liang Thin Solid Films, Vol. 334, Issue 1-2 https://doi.org/10.1016/S0040-6090(98)01124-9	journal	December 1998
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview Naslain, R. Composites Science and Technology, Vol. 64, Issue 2 https://doi.org/10.1016/S0266-3538(03)00230-6	journal	February 2004
High performance blanket for ARIES-AT power plant Raffray, A. R.; El-Guebaly, L.; Gordeev, S. Fusion Engineering and Design, Vol. 58-59 https://doi.org/10.1016/S0920-3796(01)00493-8	journal	November 2001
The EU advanced dual coolant blanket concept Norajitra, Prachai; Bühler, Leo; Fischer, Ulrich Fusion Engineering and Design, Vol. 61-62 https://doi.org/10.1016/S0920-3796(02)00107-2	journal	November 2002
Thermal and structural design issues of breeding blankets for testing in the Next European Torus (NET) Casini, G. Fusion Engineering and Design, Vol. 6 https://doi.org/10.1016/S0920-3796(88)80096-6	journal	January 1988
Improved tokamak concept focusing on easy maintenance Nishio, S.; Ueda, S.; Aoki, I. Fusion Engineering and Design, Vol. 41, Issue 1-4 https://doi.org/10.1016/S0920-3796(98)00119-7	journal	September 1998
Gelcasting of concentrated aqueous silicon carbide suspension Zhou, Longjie; Huang, Yong; Xie, Zhipeng Journal of the European Ceramic Society, Vol. 20, Issue 1 https://doi.org/10.1016/S0955-2219(99)00138-7	journal	January 2000
Mechanisms governing the performance of thermal barrier coatings Wright, P. Current Opinion in Solid State and Materials Science, Vol. 4, Issue 3 https://doi.org/10.1016/S1359-0286(99)00024-8	journal	June 1999
Materials challenges in nuclear energy Zinkle, S. J.; Was, G. S. Acta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.actamat.2012.11.004	journal	February 2013
Design and development of high-power piezoelectric ceramics through integration of crystallographic texturing and acceptor-doping Leng, Haoyang; Yan, Yongke; Liu, Hairui Acta Materialia, Vol. 206 https://doi.org/10.1016/j.actamat.2020.116610	journal	March 2021
Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method Cramer, Corson L.; Nandwana, Peeyush; Lowden, Richard A. Additive Manufacturing, Vol. 28 https://doi.org/10.1016/j.addma.2019.04.009	journal	August 2019
Additive manufacturing for energy: A review Sun, Cheng; Wang, Yun; McMurtrey, Michael D. Applied Energy, Vol. 282 https://doi.org/10.1016/j.apenergy.2020.116041	journal	January 2021
Flexible thermoelectric materials and devices Du, Yong; Xu, Jiayue; Paul, Biplab Applied Materials Today, Vol. 12 https://doi.org/10.1016/j.apmt.2018.07.004	journal	September 2018
Additive manufacturing of thermoelectric materials via fused filament fabrication Oztan, Cagri; Ballikaya, Sedat; Ozgun, Umit Applied Materials Today, Vol. 15 https://doi.org/10.1016/j.apmt.2019.01.001	journal	June 2019
CO 2 , CH 4 and N 2 separation with a 3DFD-printed ZSM-5 monolith Couck, Sarah; Lefevere, Jasper; Mullens, Steven Chemical Engineering Journal, Vol. 308 https://doi.org/10.1016/j.cej.2016.09.046	journal	January 2017
Development of 3D-printed polymer-zeolite composite monoliths for gas separation Thakkar, Harshul; Lawson, Shane; Rownaghi, Ali A. Chemical Engineering Journal, Vol. 348 https://doi.org/10.1016/j.cej.2018.04.178	journal	September 2018
Phase composition, microstructure and mechanical properties of ZrC coatings produced by chemical vapor deposition Long, Ying; Javed, Athar; Chen, Jie Ceramics International, Vol. 40, Issue 1 https://doi.org/10.1016/j.ceramint.2013.06.059	journal	January 2014
Comparison study of fabrication of ceramic rotor using various manufacturing methods Huang, Mingyue; Zhang, Dan Qing; Liu, Zhong Hong Ceramics International, Vol. 40, Issue 8 https://doi.org/10.1016/j.ceramint.2014.04.104	journal	September 2014
Fabrication of barium titanate by binder jetting additive manufacturing technology Gaytan, S. M.; Cadena, M. A.; Karim, H. Ceramics International, Vol. 41, Issue 5 https://doi.org/10.1016/j.ceramint.2015.01.108	journal	June 2015
Micro-stereolithography of KNN-based lead-free piezoceramics Chen, Weicen; Wang, Fangfang; Yan, Kang Ceramics International, Vol. 45, Issue 4 https://doi.org/10.1016/j.ceramint.2018.11.185	journal	March 2019
Preparation of high piezoelectric and flexible polyvinylidene fluoride nanofibers via lead zirconium titanate doping Qiao, Xiaojun; Geng, Wenping; Sun, Yao Ceramics International, Vol. 46, Issue 18 https://doi.org/10.1016/j.ceramint.2020.08.034	journal	December 2020
Enhanced thermionic emission of mayenite electride composites in an Ar glow discharge plasma Tang, Xiaochuan; Kuehster, Adam E.; DeBoer, Brodderic A. Ceramics International, Vol. 47, Issue 12 https://doi.org/10.1016/j.ceramint.2021.02.233	journal	June 2021
Dynamic thermomechanical modeling and simulation of the design of rapid free-form 3D printing processes with evolutionary machine learning Zohdi, T. I. Computer Methods in Applied Mechanics and Engineering, Vol. 331 https://doi.org/10.1016/j.cma.2017.11.030	journal	April 2018
The potentials of additive manufacturing for mass production of electrochemical energy systems Hashemi, S. Mohammad H.; Babic, Ugljesa; Hadikhani, Pooria Current Opinion in Electrochemistry, Vol. 20 https://doi.org/10.1016/j.coelec.2020.02.008	journal	April 2020
Architected porous metals in electrochemical energy storage Egorov, Vladimir; O'Dwyer, Colm Current Opinion in Electrochemistry, Vol. 21 https://doi.org/10.1016/j.coelec.2020.02.011	journal	June 2020
Measurement and analysis of soot inception limits of oxygen-enriched coflow flames Kumfer, B. M.; Skeen, S. A.; Chen, R. Combustion and Flame, Vol. 147, Issue 3 https://doi.org/10.1016/j.combustflame.2006.08.004	journal	November 2006
Enchanced high-temperature performances of SiC/SiC composites by high densification and crystalline structure Shimoda, Kazuya; Hinoki, Tatsuya; Kishimoto, Hirotatsu Composites Science and Technology, Vol. 71, Issue 3, p. 326-332 https://doi.org/10.1016/j.compscitech.2010.11.026	journal	February 2011
Radiation effects in SiC for nuclear structural applications Katoh, Yutai; Snead, Lance L.; Szlufarska, Izabela Current Opinion in Solid State and Materials Science, Vol. 16, Issue 3 https://doi.org/10.1016/j.cossms.2012.03.005	journal	June 2012
Three-dimensional Inkjet Printed Solid Oxide Electrochemical Reactors. I. Yttria-stabilized Zirconia Electrolyte Farandos, N. M.; Kleiminger, L.; Li, T. Electrochimica Acta, Vol. 213 https://doi.org/10.1016/j.electacta.2016.07.103	journal	September 2016
Electrochromic materials and devices for energy efficiency and human comfort in buildings: A critical review Granqvist, C. G.; Arvizu, M. A.; Bayrak Pehlivan, İ. Electrochimica Acta, Vol. 259 https://doi.org/10.1016/j.electacta.2017.11.169	journal	January 2018
Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study Cohen, E.; Menkin, S.; Lifshits, M. Electrochimica Acta, Vol. 265 https://doi.org/10.1016/j.electacta.2018.01.197	journal	March 2018
3-D inkjet-printed solid oxide electrochemical reactors. II. LSM - YSZ electrodes Farandos, N. M.; Li, T.; Kelsall, G. H. Electrochimica Acta, Vol. 270 https://doi.org/10.1016/j.electacta.2018.03.095	journal	April 2018
The thermoelement as thermoelectric power generator: Effect of leg geometry on the efficiency and power generation Sahin, Ahmet Z.; Yilbas, Bekir S. Energy Conversion and Management, Vol. 65 https://doi.org/10.1016/j.enconman.2012.07.020	journal	January 2013
Recent advances and future challenges in printed batteries Costa, C. M.; Gonçalves, R.; Lanceros-Méndez, S. Energy Storage Materials, Vol. 28 https://doi.org/10.1016/j.ensm.2020.03.012	journal	June 2020
The European power plant conceptual study Maisonnier, D.; Cook, I.; Pierre, Sardain Fusion Engineering and Design, Vol. 75-79 https://doi.org/10.1016/j.fusengdes.2005.06.095	journal	November 2005
Recent research and development for the dual-coolant blanket concept in the US Morley, N. B.; Katoh, Y.; Malang, S. Fusion Engineering and Design, Vol. 83, Issue 7-9 https://doi.org/10.1016/j.fusengdes.2008.04.012	journal	December 2008
Fusion materials science and technology research opportunities now and during the ITER era Zinkle, S. J.; Blanchard, J. P.; Callis, R. W. Fusion Engineering and Design, Vol. 89, Issue 7-8 https://doi.org/10.1016/j.fusengdes.2014.02.048	journal	October 2014
Dual-coolant lead–lithium (DCLL) blanket status and R&D needs Smolentsev, Sergey; Morley, Neil B.; Abdou, Mohamed A. Fusion Engineering and Design, Vol. 100 https://doi.org/10.1016/j.fusengdes.2014.12.031	journal	November 2015
Development of a new cellular solid breeder for enhanced tritium production Sharafat, Shahram; Williams, Brian; Ghoniem, Nasr Fusion Engineering and Design, Vol. 109-111 https://doi.org/10.1016/j.fusengdes.2016.03.041	journal	November 2016
Numerical modeling of first experiments on PbLi MHD flows in a rectangular duct with foam-based SiC flow channel insert Smolentsev, S.; Courtessole, C.; Abdou, M. Fusion Engineering and Design, Vol. 108 https://doi.org/10.1016/j.fusengdes.2016.04.035	journal	October 2016
A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique Wei, Luyang; Zhang, Jinjin; Yu, Fangyong International Journal of Hydrogen Energy, Vol. 44, Issue 12 https://doi.org/10.1016/j.ijhydene.2019.01.071	journal	March 2019
High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants De Hazan, Yoram; Heinecke, Judit; Weber, Alfred Journal of Colloid and Interface Science, Vol. 337, Issue 1 https://doi.org/10.1016/j.jcis.2009.05.012	journal	September 2009
Giant piezoresistivity of polymer-derived ceramics at high temperatures Terauds, K.; Sanchez-Jimenez, P. E.; Raj, R. Journal of the European Ceramic Society, Vol. 30, Issue 11 https://doi.org/10.1016/j.jeurceramsoc.2010.02.024	journal	August 2010
LAS glass–ceramic scaffolds by three-dimensional printing Zocca, Andrea; Gomes, Cynthia M.; Bernardo, Enrico Journal of the European Ceramic Society, Vol. 33, Issue 9 https://doi.org/10.1016/j.jeurceramsoc.2012.12.012	journal	August 2013
Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer Pierin, Giovanni; Grotta, Chiara; Colombo, Paolo Journal of the European Ceramic Society, Vol. 36, Issue 7 https://doi.org/10.1016/j.jeurceramsoc.2016.01.047	journal	June 2016
SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems de Hazan, Y.; Penner, D. Journal of the European Ceramic Society, Vol. 37, Issue 16 https://doi.org/10.1016/j.jeurceramsoc.2017.03.021	journal	December 2017
Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications Masciandaro, S.; Torrell, M.; Leone, P. Journal of the European Ceramic Society, Vol. 39, Issue 1 https://doi.org/10.1016/j.jeurceramsoc.2017.11.033	journal	January 2019
Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing Bae, Chang-Jun; Kim, Daniel; Halloran, John W. Journal of the European Ceramic Society, Vol. 39, Issue 2-3 https://doi.org/10.1016/j.jeurceramsoc.2018.09.013	journal	February 2019
3D printing of ceramics: A review Chen, Zhangwei; Li, Ziyong; Li, Junjie Journal of the European Ceramic Society, Vol. 39, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2018.11.013	journal	April 2019
Dense 8 mol% yttria-stabilized zirconia electrolyte by DLP stereolithography Xing, Bohang; Cao, Chuanru; Zhao, Weiming Journal of the European Ceramic Society, Vol. 40, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2019.09.045	journal	April 2020
Strength of additive manufactured alumina Schlacher, J.; Lube, T.; Harrer, W. Journal of the European Ceramic Society, Vol. 40, Issue 14 https://doi.org/10.1016/j.jeurceramsoc.2020.03.073	journal	November 2020
An overview of ceramic molds for investment casting of nickel superalloys Kanyo, Janos E.; Schafföner, Stefan; Uwanyuze, R. Sharon Journal of the European Ceramic Society, Vol. 40, Issue 15 https://doi.org/10.1016/j.jeurceramsoc.2020.07.013	journal	December 2020
Direct writing of textured ceramics using anisotropic nozzles Walton, Rebecca L.; Brova, Michael J.; Watson, Beecher H. Journal of the European Ceramic Society, Vol. 41, Issue 3 https://doi.org/10.1016/j.jeurceramsoc.2020.10.021	journal	March 2021
Influences of energy density on microstructure and consolidation of selective laser melted bismuth telluride thermoelectric powder El-Desouky, Ahmed; Carter, Michael; Mahmoudi, Mohamad Journal of Manufacturing Processes, Vol. 25 https://doi.org/10.1016/j.jmapro.2016.12.008	journal	January 2017
Ceramic cores for turbine blades via injection moulding Gromada, Magdalena; Świeca, Adam; Kostecki, Marek Journal of Materials Processing Technology, Vol. 220 https://doi.org/10.1016/j.jmatprotec.2015.01.010	journal	June 2015
Updated definition of glass-ceramics Deubener, J.; Allix, M.; Davis, M. J. Journal of Non-Crystalline Solids, Vol. 501 https://doi.org/10.1016/j.jnoncrysol.2018.01.033	journal	December 2018
Estimation of maximum coated particle fuel compact packing fraction Morris, R. N.; Pappano, P. J. Journal of Nuclear Materials, Vol. 361, Issue 1 https://doi.org/10.1016/j.jnucmat.2006.10.017	journal	March 2007
Fuel development for gas-cooled fast reactors Meyer, M. K.; Fielding, R.; Gan, J. Journal of Nuclear Materials, Vol. 371, Issue 1-3, p. 281-287 https://doi.org/10.1016/j.jnucmat.2007.05.013	journal	September 2007
An approach to fuel development and qualification Crawford, Douglas C.; Porter, Douglas L.; Hayes, Steven L. Journal of Nuclear Materials, Vol. 371, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2007.05.029	journal	September 2007
A novel approach to fabricating fuel compacts for the next generation nuclear plant (NGNP) Pappano, P. J.; Burchell, T. D.; Hunn, J. D. Journal of Nuclear Materials, Vol. 381, Issue 1-2 https://doi.org/10.1016/j.jnucmat.2008.07.032	journal	October 2008
Fabrication and characterization of fully ceramic microencapsulated fuels Terrani, K. A.; Kiggans, J. O.; Katoh, Y. Journal of Nuclear Materials, Vol. 426, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.03.049	journal	July 2012
Microencapsulated fuel technology for commercial light water and advanced reactor application Terrani, Kurt A.; Snead, Lance L.; Gehin, Jess C. Journal of Nuclear Materials, Vol. 427, Issue 1-3, p. 209-224 https://doi.org/10.1016/j.jnucmat.2012.05.021	journal	August 2012
Recent developments of solid breeder fabrication Knitter, R.; Chaudhuri, P.; Feng, Y. J. Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.02.060	journal	November 2013
Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects Katoh, Yutai; Ozawa, Kazumi; Shih, Chunghao Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.06.040	journal	May 2014
Silicon carbide composite for light water reactor fuel assembly applications Yueh, Ken; Terrani, Kurt A. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.12.004	journal	May 2014
Accident tolerant fuels for LWRs: A perspective Zinkle, S. J.; Terrani, K. A.; Gehin, J. C. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.12.005	journal	May 2014
Progress on matrix SiC processing and properties for fully ceramic microencapsulated fuel form Terrani, K. A.; Kiggans, J. O.; Silva, C. M. Journal of Nuclear Materials, Vol. 457 https://doi.org/10.1016/j.jnucmat.2014.10.034	journal	February 2015
Accident tolerant fuel cladding development: Promise, status, and challenges Terrani, Kurt A. Journal of Nuclear Materials, Vol. 501 https://doi.org/10.1016/j.jnucmat.2017.12.043	journal	April 2018
Coated particle fuel: Historical perspectives and current progress Demkowicz, Paul A.; Liu, Bing; Hunn, John D. Journal of Nuclear Materials, Vol. 515 https://doi.org/10.1016/j.jnucmat.2018.09.044	journal	March 2019
Accelerating nuclear fuel development and qualification: Modeling and simulation integrated with separate-effects testing Terrani, Kurt A.; Capps, Nathan A.; Kerr, Matthew J. Journal of Nuclear Materials, Vol. 539 https://doi.org/10.1016/j.jnucmat.2020.152267	journal	October 2020
Impact of uranium oxide (UO2) fuel with molybdenum (Mo) inserts on pressurized water reactor performance and safety Gorton, Jacob P.; Schappel, Daniel; Nelson, Andrew T. Journal of Nuclear Materials, Vol. 542 https://doi.org/10.1016/j.jnucmat.2020.152492	journal	December 2020
Additive manufacturing of silicon carbide for nuclear applications Koyanagi, Takaaki; Terrani, Kurt; Harrison, Shay Journal of Nuclear Materials, Vol. 543 https://doi.org/10.1016/j.jnucmat.2020.152577	journal	January 2021
Architecture and properties of TCR fuel form Terrani, K. A.; Jolly, B. C.; Trammell, M. P. Journal of Nuclear Materials, Vol. 547 https://doi.org/10.1016/j.jnucmat.2021.152781	journal	April 2021
Qualification pathways for additively manufactured components for nuclear applications Hensley, C.; Sisco, K.; Beauchamp, S. Journal of Nuclear Materials, Vol. 548 https://doi.org/10.1016/j.jnucmat.2021.152846	journal	May 2021
Irradiation stability and thermomechanical properties of 3D-printed SiC Terrani, K. A.; Lach, T.; Wang, H. Journal of Nuclear Materials, Vol. 551 https://doi.org/10.1016/j.jnucmat.2021.152980	journal	August 2021
Embedded sensors in additively manufactured silicon carbide Petrie, Christian M.; Schrell, Adrian M.; Leonard, Donovan N. Journal of Nuclear Materials, Vol. 552 https://doi.org/10.1016/j.jnucmat.2021.153012	journal	August 2021
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading Yao, Bin; Chandrasekaran, Swetha; Zhang, Jing Joule, Vol. 3, Issue 2 https://doi.org/10.1016/j.joule.2018.09.020	journal	February 2019
Electrolytes for solid oxide fuel cells Fergus, Jeffrey W. Journal of Power Sources, Vol. 162, Issue 1 https://doi.org/10.1016/j.jpowsour.2006.06.062	journal	November 2006
Aerosol Jet® Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy Sukeshini A., Mary; Meisenkothen, Frederick; Gardner, Paul Journal of Power Sources, Vol. 224 https://doi.org/10.1016/j.jpowsour.2012.09.094	journal	February 2013
Prospects for reducing the processing cost of lithium ion batteries Wood, David L.; Li, Jianlin; Daniel, Claus Journal of Power Sources, Vol. 275 https://doi.org/10.1016/j.jpowsour.2014.11.019	journal	February 2015
Enhanced piezoelectric properties and strain response in 〈001〉 textured BNT-BKT-BT ceramics Zhao, Zhi-Hao; Ye, Meng-Yang; Ji, Hui-Ming Materials & Design, Vol. 137 https://doi.org/10.1016/j.matdes.2017.10.003	journal	January 2018
Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer Pelanconi, M.; Barbato, M.; Zavattoni, S. Materials & Design, Vol. 163 https://doi.org/10.1016/j.matdes.2018.107539	journal	February 2019
Inkjet-printing-derived lead-zirconate-titanate-based thick films for printed electronics Kuscer, Danjela; Drnovšek, Silvo; Levassort, Franck Materials & Design, Vol. 198 https://doi.org/10.1016/j.matdes.2020.109324	journal	January 2021
Thermoelectric Higher Manganese Silicide: Synthetized, sintered and shaped simultaneously by selective laser sintering/Melting additive manufacturing technique Thimont, Yohann; Presmanes, Lionel; Baylac, Vincent Materials Letters, Vol. 214 https://doi.org/10.1016/j.matlet.2017.12.026	journal	March 2018
Electrical conductive 3D-printed monolith adsorbent for CO2 capture Regufe, Maria João; Ferreira, Alexandre F. P.; Loureiro, José Miguel Microporous and Mesoporous Materials, Vol. 278 https://doi.org/10.1016/j.micromeso.2019.01.009	journal	April 2019
3D printing of piezoelectric element for energy focusing and ultrasonic sensing Chen, Zeyu; Song, Xuan; Lei, Liwen Nano Energy, Vol. 27 https://doi.org/10.1016/j.nanoen.2016.06.048	journal	September 2016
Toward a remarkable Li-S battery via 3D printing Gao, Xuejie; Sun, Qian; Yang, Xiaofei Nano Energy, Vol. 56 https://doi.org/10.1016/j.nanoen.2018.12.001	journal	February 2019
All 3D-printed stretchable piezoelectric nanogenerator with non-protruding kirigami structure Zhou, Xinran; Parida, Kaushik; Halevi, Oded Nano Energy, Vol. 72 https://doi.org/10.1016/j.nanoen.2020.104676	journal	June 2020
Design study on the new EU DEMO HCPB breeding blanket: Thermal analysis Zhou, Guangming; Hernández, Francisco; Boccaccini, Lorenzo V. Progress in Nuclear Energy, Vol. 98 https://doi.org/10.1016/j.pnucene.2017.03.013	journal	July 2017
The effect of soluble boron and gadolinium distribution on neutronic parameters of small modular reactor assembly Mustafa, Sayed Saeed; Amin, E. A. Radiation Physics and Chemistry, Vol. 171 https://doi.org/10.1016/j.radphyschem.2020.108724	journal	June 2020
Active dynamic windows for buildings: A review Casini, Marco Renewable Energy, Vol. 119 https://doi.org/10.1016/j.renene.2017.12.049	journal	April 2018
One piece ceramic heat exchanger for concentrating solar power electric plants Singh, Dileep; Yu, Wenhua; France, David M. Renewable Energy, Vol. 160 https://doi.org/10.1016/j.renene.2020.07.070	journal	November 2020
Review on supercapacitors: Technologies and materials González, Ander; Goikolea, Eider; Barrena, Jon Andoni Renewable and Sustainable Energy Reviews, Vol. 58 https://doi.org/10.1016/j.rser.2015.12.249	journal	May 2016
Piezoresistance of silicon and strained Si0.9Ge0.1 Richter, J.; Hansen, O.; Nylandsted Larsen, A. Sensors and Actuators A: Physical, Vol. 123-124 https://doi.org/10.1016/j.sna.2005.02.038	journal	September 2005
Progress in chromogenics: New results for electrochromic and thermochromic materials and devices Granqvist, C. G.; Lansåker, P. C.; Mlyuka, N. R. Solar Energy Materials and Solar Cells, Vol. 93, Issue 12 https://doi.org/10.1016/j.solmat.2009.02.026	journal	December 2009
3D Printing for Electrochemical Energy Applications Browne, Michelle P.; Redondo, Edurne; Pumera, Martin Chemical Reviews, Vol. 120, Issue 5 https://doi.org/10.1021/acs.chemrev.9b00783	journal	February 2020
Precipitation-Printed High-β Phase Poly(vinylidene fluoride) for Energy Harvesting Tu, Ruowen; Sprague, Ethan; Sodano, Henry A. ACS Applied Materials & Interfaces, Vol. 12, Issue 52 https://doi.org/10.1021/acsami.0c16207	journal	December 2020
Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates Chen, Bolin; Jiang, Yizhou; Tang, Xiaohui ACS Applied Materials & Interfaces, Vol. 9, Issue 34 https://doi.org/10.1021/acsami.7b06804	journal	August 2017
Fabrication and Thermoelectric Properties of n-Type CoSb _2.85 Te _0.15 Using Selective Laser Melting Yan, Yonggao; Ke, Hongquan; Yang, Jihui ACS Applied Materials & Interfaces, Vol. 10, Issue 16 https://doi.org/10.1021/acsami.8b01564	journal	April 2018
Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach Wang, Jiwei; Sun, Qian; Gao, Xuejie ACS Applied Materials & Interfaces, Vol. 10, Issue 46 https://doi.org/10.1021/acsami.8b14797	journal	October 2018
Fully Controllable Design and Fabrication of Three-Dimensional Lattice Supercapacitors Song, Jian; Chen, Yuejiao; Cao, Ke ACS Applied Materials & Interfaces, Vol. 10, Issue 46 https://doi.org/10.1021/acsami.8b15731	journal	October 2018
Additive Manufacturing of Optical Quality Germania–Silica Glasses Sasan, Koroush; Lange, Andrew; Yee, Timothy D. ACS Applied Materials & Interfaces, Vol. 12, Issue 5 https://doi.org/10.1021/acsami.9b21136	journal	January 2020
Inkjet Printing for Manufacturing Solid Oxide Fuel Cells Han, Gwon Deok; Bae, Kiho; Kang, Eun Heui ACS Energy Letters, Vol. 5, Issue 5 https://doi.org/10.1021/acsenergylett.0c00721	journal	April 2020
Mesoporous Alumina-Supported Amines as Potential Steam-Stable Adsorbents for Capturing CO ₂ from Simulated Flue Gas and Ambient Air Chaikittisilp, Watcharop; Kim, Hyung-Ju; Jones, Christopher W. Energy & Fuels, Vol. 25, Issue 11 https://doi.org/10.1021/ef201224v	journal	November 2011
Materials science and architecture Bechthold, Martin; Weaver, James C. Nature Reviews Materials, Vol. 2, Issue 12 https://doi.org/10.1038/natrevmats.2017.82	journal	December 2017
Phase-change materials for rewriteable data storage Wuttig, Matthias; Yamada, Noboru Nature Materials, Vol. 6, Issue 11 https://doi.org/10.1038/nmat2009	journal	November 2007
Emerging applications of stimuli-responsive polymer materials Stuart, Martien A. Cohen; Huck, Wilhelm T. S.; Genzer, Jan Nature Materials, Vol. 9, Issue 2, p. 101-113 https://doi.org/10.1038/nmat2614	journal	January 2010
3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks Kim, Fredrick; Kwon, Beomjin; Eom, Youngho Nature Energy, Vol. 3, Issue 4 https://doi.org/10.1038/s41560-017-0071-2	journal	January 2018
Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response Cui, Huachen; Hensleigh, Ryan; Yao, Desheng Nature Materials, Vol. 18, Issue 3 https://doi.org/10.1038/s41563-018-0268-1	journal	January 2019
Liquid, glass and amorphous solid states of coordination polymers and metal–organic frameworks Bennett, Thomas D.; Horike, Satoshi Nature Reviews Materials, Vol. 3, Issue 11 https://doi.org/10.1038/s41578-018-0054-3	journal	September 2018
$ per W metrics for thermoelectric power generation: beyond ZT Yee, Shannon K.; LeBlanc, Saniya; Goodson, Kenneth E. Energy Environ. Sci., Vol. 6, Issue 9 https://doi.org/10.1039/C3EE41504J	journal	January 2013
Rational material design for ultrafast rechargeable lithium-ion batteries Tang, Yuxin; Zhang, Yanyan; Li, Wenlong Chemical Society Reviews, Vol. 44, Issue 17 https://doi.org/10.1039/C4CS00442F	journal	January 2015
Flexible thermoelectric materials and device optimization for wearable energy harvesting Bahk, Je-Hyeong; Fang, Haiyu; Yazawa, Kazuaki Journal of Materials Chemistry C, Vol. 3, Issue 40 https://doi.org/10.1039/C5TC01644D	journal	January 2015
Three dimensional printing of components and functional devices for energy and environmental applications Ruiz-Morales, J. C.; Tarancón, A.; Canales-Vázquez, J. Energy & Environmental Science, Vol. 10, Issue 4 https://doi.org/10.1039/C6EE03526D	journal	January 2017
Chemical analysis using 3D printed glass microfluidics Gal-Or, Eran; Gershoni, Yaniv; Scotti, Gianmario Analytical Methods, Vol. 11, Issue 13 https://doi.org/10.1039/C8AY01934G	journal	January 2019
Thermoelectric properties of n-type ZrNiSn prepared by rapid non-equilibrium laser processing Yan, Yonggao; Geng, Wuqian; Qiu, Junhao RSC Advances, Vol. 8, Issue 28 https://doi.org/10.1039/C8RA00992A	journal	January 2018
3D printed electrochemical energy storage devices Chang, Peng; Mei, Hui; Zhou, Shixiang Journal of Materials Chemistry A, Vol. 7, Issue 9 https://doi.org/10.1039/C8TA11860D	journal	January 2019
3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance Qiu, Junhao; Yan, Yonggao; Luo, Tingting Energy & Environmental Science, Vol. 12, Issue 10 https://doi.org/10.1039/C9EE02044F	journal	January 2019
Direct ink writing of energy materials Tagliaferri, S.; Panagiotopoulos, A.; Mattevi, C. Materials Advances, Vol. 2, Issue 2 https://doi.org/10.1039/D0MA00753F	journal	January 2021
3D printing the next generation of enhanced solid oxide fuel and electrolysis cells Pesce, Arianna; Hornés, Aitor; Núñez, Marc Journal of Materials Chemistry A, Vol. 8, Issue 33 https://doi.org/10.1039/D0TA02803G	journal	January 2020
3D-printing for electrolytic processes and electrochemical flow systems Ambrosi, Adriano; Shi, Raymond Rong Sheng; Webster, Richard D. Journal of Materials Chemistry A, Vol. 8, Issue 42 https://doi.org/10.1039/D0TA07939A	journal	January 2020
Theoretical Efficiency of the Thermionic Energy Converter Houston, J. M. Journal of Applied Physics, Vol. 30, Issue 4 https://doi.org/10.1063/1.1702392	journal	April 1959
The impact of thermoelectric leg geometries on thermal resistance and power output Thimont, Yohann; LeBlanc, Saniya Journal of Applied Physics, Vol. 126, Issue 9 https://doi.org/10.1063/1.5115044	journal	September 2019
Advanced Doped UO ₂ Pellets in LWR Applications Arborelius, Jakob; Backman, Karin; Hallstadius, Lars Journal of Nuclear Science and Technology, Vol. 43, Issue 9 https://doi.org/10.1080/18811248.2006.9711184	journal	September 2006
Thermal investigation of a micro-gap thermionic power generator Belbachir, Remi Yacine; An, Zhonglie; Ono, Takahito Journal of Micromechanics and Microengineering, Vol. 24, Issue 8 https://doi.org/10.1088/0960-1317/24/8/085009	journal	July 2014
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds Hockaday, L. A.; Kang, K. H.; Colangelo, N. W. Biofabrication, Vol. 4, Issue 3 https://doi.org/10.1088/1758-5082/4/3/035005	journal	August 2012
Additive Manufacturing of Optically Transparent Glass Klein, John; Stern, Michael; Franchin, Giorgia 3D Printing and Additive Manufacturing, Vol. 2, Issue 3 https://doi.org/10.1089/3dp.2015.0021	journal	September 2015
Thermionic Emission from Tungsten and Thoriated Tungsten Filaments Nottingham, W. B. Physical Review, Vol. 49, Issue 1 https://doi.org/10.1103/PhysRev.49.78	journal	January 1936
Thermionic Cooling of the Target Plasma to a Sub-eV Temperature Campanell, M. D.; Johnson, G. R. Physical Review Letters, Vol. 122, Issue 1 https://doi.org/10.1103/PhysRevLett.122.015003	journal	January 2019
Piezoresistive Cement-Based Materials for Strain Sensing Chung, D. D. L. Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 9 https://doi.org/10.1106/104538902031861	journal	September 2002
Ceramic 3D Printed Direct Winding Heat Exchangers for Improving Electric Machine Thermal Management Sixel, William; Liu, Mingda; Nellis, Gregory 2019 IEEE Energy Conversion Congress and Exposition (ECCE) https://doi.org/10.1109/ECCE.2019.8913234	conference	September 2019
Embedded sensors for the health monitoring of 3D printed unmanned aerial systems Stark, Brandon; Stevenson, Brennan; Stow-Parker, Kevin 2014 International Conference on Unmanned Aircraft Systems (ICUAS) https://doi.org/10.1109/ICUAS.2014.6842253	conference	May 2014
Review on Thermionic Energy Converters Abdul Khalid, Kamarul Aizat; Leong, Thye Jien; Mohamed, Khairudin IEEE Transactions on Electron Devices, Vol. 63, Issue 6 https://doi.org/10.1109/TED.2016.2556751	journal	June 2016
Frontiers in Thermionic Cathode Research Kirkwood, David M.; Gross, Steven J.; Balk, Thomas John IEEE Transactions on Electron Devices, Vol. 65, Issue 6 https://doi.org/10.1109/TED.2018.2804484	journal	June 2018
Effect of illlumination on thermionic emission from microfabricated silicon carbide structures Lee, J. -H.; Bargatin, I.; Provine, J. TRANSDUCERS 2011 - 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference https://doi.org/10.1109/TRANSDUCERS.2011.5969879	conference	June 2011
Additive Manufacturing of Dense Alumina Ceramics Schwentenwein, Martin; Homa, Johannes International Journal of Applied Ceramic Technology, Vol. 12, Issue 1 https://doi.org/10.1111/ijac.12319	journal	September 2014
Influence of Carbon Content on Ceramic Injection Molding of Reaction-Bonded Silicon Carbide Zhang, Zhao; Zhang, Yujun; Gong, Hongyu International Journal of Applied Ceramic Technology, Vol. 13, Issue 5 https://doi.org/10.1111/ijac.12570	journal	July 2016
Paralinear Oxidation of CVD SiC in Water Vapor Opila, Elizabeth J.; Hann, Raiford E. Journal of the American Ceramic Society, Vol. 80, Issue 1 https://doi.org/10.1111/j.1151-2916.1997.tb02810.x	journal	January 1997
Characterization of First-Stage Silicon Nitride Components After Exposure to an Industrial Gas Turbine Lin, H. -T.; Ferber, M. K.; Becher, P. F. Journal of the American Ceramic Society, Vol. 89, Issue 1 https://doi.org/10.1111/j.1551-2916.2005.00678.x	journal	January 2006
Sintering of 3D-Printed Glass/HAp Composites Winkel, Alexander; Meszaros, Robert; Reinsch, Stefan Journal of the American Ceramic Society, Vol. 95, Issue 11 https://doi.org/10.1111/j.1551-2916.2012.05368.x	journal	July 2012
Integrally Cored Ceramic Mold Fabricated by Ceramic Stereolithography: Ceramic Mold Fabricated by Ceramic Stereolithography Bae, Chang-Jun; Halloran, John W. International Journal of Applied Ceramic Technology, Vol. 8, Issue 6 https://doi.org/10.1111/j.1744-7402.2010.02568.x	journal	October 2010
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities Zocca, Andrea; Colombo, Paolo; Gomes, Cynthia M. Journal of the American Ceramic Society, Vol. 98, Issue 7 https://doi.org/10.1111/jace.13700	journal	July 2015
3D printing of high‐purity silicon carbide Terrani, Kurt; Jolly, Brian; Trammell, Michael Journal of the American Ceramic Society, Vol. 103, Issue 3 https://doi.org/10.1111/jace.16888	journal	October 2019
Properties of SiC‐Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration Cramer, Corson L.; Elliott, Amy M.; Lara‐Curzio, Edgar Journal of the American Ceramic Society, Vol. 104, Issue 11 https://doi.org/10.1111/jace.17933	journal	June 2021
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model Sachs, E.; Cima, M.; Williams, P. Journal of Engineering for Industry, Vol. 114, Issue 4 https://doi.org/10.1115/1.2900701	journal	January 1992
Development of Ceramic Turbocharger Rotors for High-Temperature Use Kawase, H.; Kato, K.; Matsuhisa, T. Journal of Engineering for Gas Turbines and Power, Vol. 115, Issue 1 https://doi.org/10.1115/1.2906681	journal	January 1993
A Design Review of Ceramic Components for Turbine Engines Coty, P. J.; Lane, A. D.; Lee, J. B. Journal of Engineering for Power, Vol. 102, Issue 2 https://doi.org/10.1115/1.3230276	journal	April 1980
System-Level Performance of Microturbines With an Inside-Out Ceramic Turbine Kochrad, Nidal; Courtois, Nicolas; Charette, Miguel Journal of Engineering for Gas Turbines and Power, Vol. 139, Issue 6 https://doi.org/10.1115/1.4035648	journal	February 2017
Heat Exchangers for Fuel Cell and Hybrid System Applications Magistri, L.; Traverso, A.; Massardo, A. F. ASME 2005 3rd International Conference on Fuel Cell Science, Engineering and Technology https://doi.org/10.1115/FUELCELL2005-74176	conference	October 2008
Thermal Barrier Coatings for Gas-Turbine Engine Applications Padture, N. P. Science, Vol. 296, Issue 5566 https://doi.org/10.1126/science.1068609	journal	April 2002
Additive manufacturing of polymer-derived ceramics Eckel, Z. C.; Zhou, C.; Martin, J. H. Science, Vol. 351, Issue 6268 https://doi.org/10.1126/science.aad2688	journal	December 2015
A general method to synthesize and sinter bulk ceramics in seconds Wang, Chengwei; Ping, Weiwei; Bai, Qiang Science, Vol. 368, Issue 6490 https://doi.org/10.1126/science.aaz7681	journal	April 2020
Recent advances in solid oxide cell technology for electrolysis Hauch, A.; Küngas, R.; Blennow, P. Science, Vol. 370, Issue 6513 https://doi.org/10.1126/science.aba6118	journal	October 2020
Switchable Materials for Smart Windows Wang, Yang; Runnerstrom, Evan L.; Milliron, Delia J. Annual Review of Chemical and Biomolecular Engineering, Vol. 7, Issue 1 https://doi.org/10.1146/annurev-chembioeng-080615-034647	journal	June 2016
Thermoelectric Phenomena, Materials, and Applications Tritt, Terry M. Annual Review of Materials Research, Vol. 41, Issue 1 https://doi.org/10.1146/annurev-matsci-062910-100453	journal	August 2011
Overview on Lithium-Ion Battery 3D-Printing By Means of Material Extrusion Maurel, Alexis; Grugeon, Sylvie; Armand, Michel ECS Transactions, Vol. 98, Issue 13 https://doi.org/10.1149/09813.0003ecst	journal	September 2020
One-Step Synthesis of a 12CaO[middle dot]7Al2O3 Electride via the Spark Plasma Sintering (SPS) Method Chung, Jun Ho; Ryu, Jeong Ho; Eun, Jong Won Electrochemical and Solid-State Letters, Vol. 14, Issue 12 https://doi.org/10.1149/2.021112esl	journal	January 2011
High Temperature Compatibility Issues for Fusion Reactor Structural Materials Pint, B. A.; DiStefano, J. R.; Tortorelli, P. F. Fusion Science and Technology, Vol. 44, Issue 2 https://doi.org/10.13182/FST03-A373	journal	September 2003
Development Status of a SiC-Foam Based Flow Channel Insert for a U.S.-ITER DCLL TBM Sharafat, Shahram; Aoyama, Aaron; Morley, Neil Fusion Science and Technology, Vol. 56, Issue 2 https://doi.org/10.13182/FST09-7	journal	August 2009
ARIES-ACT1 System Configuration, Assembly, and Maintenance Wang, X. R.; Tillack, M. S.; Koehly, C. Fusion Science and Technology, Vol. 67, Issue 1 https://doi.org/10.13182/FST14-797	journal	January 2015
ARIES-ACT2 DCLL Power Core Design and Engineering Wang, X. R.; Tillack, M. S.; Koehly, C. Fusion Science and Technology, Vol. 67, Issue 1 https://doi.org/10.13182/FST14-798	journal	January 2015
Development of Sandwich Flow Channel Inserts for an EU DEMO Dual Coolant Blanket Concept Norajitra, Prachai; Basuki, Widodo Widjaja; Gonzalez, Maria Fusion Science and Technology, Vol. 68, Issue 3 https://doi.org/10.13182/FST14-932	journal	October 2015
Boron-Nitride–Coated Nuclear Fuels Gündüz, Güngör; Uslu, İbrahım; Durmazuçar, Hasan H. Nuclear Technology, Vol. 116, Issue 1 https://doi.org/10.13182/NT96-A35313	journal	October 1996
Absorber and emitter for solar thermo-photovoltaic systems to achieve efficiency exceeding the Shockley-Queisser limit Rephaeli, Eden; Fan, Shanhui Optics Express, Vol. 17, Issue 17, p. 15145-15159 https://doi.org/10.1364/OE.17.015145	journal	January 2009
3D-printing of arsenic sulfide chalcogenide glasses Baudet, E.; Ledemi, Y.; Larochelle, P. Optical Materials Express, Vol. 9, Issue 5 https://doi.org/10.1364/OME.9.002307	journal	January 2019
Laser additive manufacturing of powdered bismuth telluride Zhang, Haidong; Hobbis, Dean; Nolas, George S. Journal of Materials Research, Vol. 33, Issue 23 https://doi.org/10.1557/jmr.2018.390	journal	November 2018
Advances in Coating Design for High-Performance Gas Turbines Nicholls, J. R. MRS Bulletin, Vol. 28, Issue 9 https://doi.org/10.1557/mrs2003.194	journal	September 2003
Precision Forming and Machining Technologies for Ceramic-Based Components Watanabe, Keiichiro; Takahashi, Tomonori; Nagae, Tomoki International Journal of Automation Technology, Vol. 12, Issue 5 https://doi.org/10.20965/ijat.2018.p0739	journal	September 2018
The Effects of Zircon Addition on the Crystallization of Fused Silica Wang, Ling-Yi; Hon, Min-Hsiung Journal of the Ceramic Society of Japan, Vol. 102, Issue 1186 https://doi.org/10.2109/jcersj.102.517	journal	January 1994
Additive Manufacturing for Cost Efficient Production of Compact Ceramic Heat Exchangers and Recuperators Shulman, Holly; Ross, Nicole https://doi.org/10.2172/1234436	report	October 2015
Features that Further Performance Limits of Nuclear Fuel Fabrication: Opportunities for Additive Manufacturing of Nuclear Fuels Nelson, Andrew T. https://doi.org/10.2172/1669784	report	May 2019
Ceramic Parts Fabricated by Ceramic Laser Fusion Tang, Hwa-Hsing; Yen, Hsiao-Chuan MATERIALS TRANSACTIONS, Vol. 45, Issue 8 https://doi.org/10.2320/matertrans.45.2744	journal	January 2004
Electron Transpiration Cooling for Hot Aerospace Surfaces Uribarri, Luke; Allen, Edward H. 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference https://doi.org/10.2514/6.2015-3674	conference	July 2015
The Influence of Leg Shape on Thermoelectric Performance Under Constant Temperature and Heat Flux Boundary Conditions Şişik, Bengisu; LeBlanc, Saniya Frontiers in Materials, Vol. 7 https://doi.org/10.3389/fmats.2020.595955	journal	November 2020
Dense, Strong, and Precise Silicon Nitride-Based Ceramic Parts by Lithography-Based Ceramic Manufacturing Altun, Altan Alpay; Prochaska, Thomas; Konegger, Thomas Applied Sciences, Vol. 10, Issue 3 https://doi.org/10.3390/app10030996	journal	February 2020
Applications of Smart Glasses in Applied Sciences: A Systematic Review Kim, Dawon; Choi, Yosoon Applied Sciences, Vol. 11, Issue 11 https://doi.org/10.3390/app11114956	journal	May 2021
On the Fabrication of Metallic Single Crystal Turbine Blades with a Commentary on Repair via Additive Manufacturing Angel, Nicole Marie; Basak, Amrita Journal of Manufacturing and Materials Processing, Vol. 4, Issue 4 https://doi.org/10.3390/jmmp4040101	journal	October 2020
Candidate Core Designs for the Transformational Challenge Reactor Ade, Brian J.; Betzler, Benjamin R.; Wysocki, Aaron J. Journal of Nuclear Engineering, Vol. 2, Issue 1 https://doi.org/10.3390/jne2010008	journal	March 2021
Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting Liu, Fei; Zhang, David; Zhang, Peng Materials, Vol. 11, Issue 3 https://doi.org/10.3390/ma11030374	journal	March 2018
Application of Ceramic Lattice Structures to Design Compact, High Temperature Heat Exchangers: Material and Architecture Selection Pelanconi, Marco; Zavattoni, Simone; Cornolti, Luca Materials, Vol. 14, Issue 12 https://doi.org/10.3390/ma14123225	journal	June 2021
Up-Cycling of LCD Glass by Additive Manufacturing of Porous Translucent Glass Scaffolds Dasan, Arish; Ożóg, Paulina; Kraxner, Jozef Materials, Vol. 14, Issue 17 https://doi.org/10.3390/ma14175083	journal	September 2021
Ceramic Nanocomposites from Tailor-Made Preceramic Polymers Mera, Gabriela; Gallei, Markus; Bernard, Samuel Nanomaterials, Vol. 5, Issue 2 https://doi.org/10.3390/nano5020468	journal	April 2015
Stretchable, Highly Durable Ternary Nanocomposite Strain Sensor for Structural Health Monitoring of Flexible Aircraft Yin, Feng; Ye, Dong; Zhu, Chen Sensors, Vol. 17, Issue 11 https://doi.org/10.3390/s17112677	journal	November 2017
A Review of Range Extenders in Battery Electric Vehicles: Current Progress and Future Perspectives Tran, Manh-Kien; Bhatti, Asad; Vrolyk, Reid World Electric Vehicle Journal, Vol. 12, Issue 2 https://doi.org/10.3390/wevj12020054	journal	April 2021
Development of Silicon Nitride Components for Gas Turbine Fukudome, Takero; Tsuruzono, Sazo; Tatsumi, Tetsuo Key Engineering Materials, Vol. 287 https://doi.org/10.4028/www.scientific.net/KEM.287.10	journal	June 2005
Superalloy Technology - A Perspective on Critical Innovations for Turbine Engines Schafrik, Robert; Sprague, Robert Key Engineering Materials, Vol. 380 https://doi.org/10.4028/www.scientific.net/KEM.380.113	journal	March 2008
Silicon Nitride Turbocharger Rotor for High Performance Automotive Engines Shimizu, Tetsuji; Takama, Ken-ichiro; Enokishima, Hisato International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/900656	conference	February 1990
High-temperature piezoresistive C / SiOC sensors Roth, F.; Schmerbauch, C.; Ionescu, E. Journal of Sensors and Sensor Systems, Vol. 4, Issue 1 https://doi.org/10.5194/jsss-4-133-2015	journal	January 2015
Embedded sensing: integrating sensors in 3-D printed structures Dijkshoorn, Alexander; Werkman, Patrick; Welleweerd, Marcel Journal of Sensors and Sensor Systems, Vol. 7, Issue 1 https://doi.org/10.5194/jsss-7-169-2018	journal	January 2018
FABRICATION AND MATERIAL ISSUES FOR THE APPLICATION OF SiC COMPOSITES TO LWR FUEL CLADDING Kim, Weon-Ju; Kim, Daejong; Park, Ji Yeon Nuclear Engineering and Technology, Vol. 45, Issue 4 https://doi.org/10.5516/NET.07.2012.084	journal	August 2013

Similar Records

Material selection and manufacturing for high‐temperature heat exchangers: Review of state‐of‐the‐art development, opportunities, and challenges

Journal Article · 2024 · International Journal of Ceramic Engineering & Science · OSTI ID:2406983

Cramer, Corson L.; Lara‐Curzio, Edgar; Elliott, Amy M.; +6 more

3D printing of lignin: Challenges, opportunities and roads onward

Journal Article · 2021 · Biopolymers · OSTI ID:1786228

Ebers, L. ‐S.; Arya, Aditi; Bowland, C. C.; +4 more

Roadmap on energy harvesting materials

Journal Article · 2023 · JPhys Materials · OSTI ID:1993878

Pecunia, Vincenzo; Silva, S Ravi P; Phillips, Jamie D; +113 more

Related Subjects

36 MATERIALS SCIENCE
42 ENGINEERING
additive manufacturing (AM)
advanced manufacturing
ceramics
energy and environment
materials selection
processing

Title: Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Citation Formats

References (219)

Similar Records

Related Subjects