A spiral laser scanning routine for powder bed fusion inspired by natural predator-prey behaviour

Kim, Suh In; Hart, A. John

doi:10.1080/17452759.2022.2031232

Title: A spiral laser scanning routine for powder bed fusion inspired by natural predator-prey behaviour

Journal Article · 07 February 2022 · Virtual and Physical Prototyping

DOI: https://doi.org/10.1080/17452759.2022.2031232 · OSTI ID:1871607

^[1];

^[1]

Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E)

Grant/Contract Number:: AR0001434

OSTI ID:: 1871607

Journal Information:: Virtual and Physical Prototyping, Journal Name: Virtual and Physical Prototyping Journal Issue: 2 Vol. 17; ISSN 1745-2759

Publisher:: Informa UK LimitedCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (48)

Additive manufacturing scanning paths optimization using shape optimization tools Boissier, M.; Allaire, G.; Tournier, C. Structural and Multidisciplinary Optimization, Vol. 61, Issue 6 https://doi.org/10.1007/s00158-020-02614-3	journal	June 2020
The helix scan strategy applied to the selective laser melting Bo, Qian; Yu-sheng, Shi; Qing-song, Wei The International Journal of Advanced Manufacturing Technology, Vol. 63, Issue 5-8 https://doi.org/10.1007/s00170-012-3922-9	journal	January 2012
On the energy efficiency of pre-heating methods in SLM/SLS processes Papadakis, Loucas; Chantzis, Dimitrios; Salonitis, Konstantinos The International Journal of Advanced Manufacturing Technology, Vol. 95, Issue 1-4 https://doi.org/10.1007/s00170-017-1287-9	journal	November 2017
Evaluation of the impact of scanning strategies on residual stresses in selective laser melting Mugwagwa, L.; Dimitrov, D.; Matope, S. The International Journal of Advanced Manufacturing Technology, Vol. 102, Issue 5-8 https://doi.org/10.1007/s00170-019-03396-9	journal	February 2019
Aggregation and the competitive exclusion principle Britton, N. F. Journal of Theoretical Biology, Vol. 136, Issue 1 https://doi.org/10.1016/S0022-5193(89)80189-4	journal	January 1989
The chemical basis of morphogenesis Turing, A. Bulletin of Mathematical Biology, Vol. 52, Issue 1-2 https://doi.org/10.1016/S0092-8240(05)80008-4	journal	January 1990
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.014	journal	April 2016
Analysis of laser-induced microcracking in tungsten under additive manufacturing conditions: Experiment and simulation Vrancken, Bey; Ganeriwala, Rishi K.; Matthews, Manyalibo J. Acta Materialia, Vol. 194 https://doi.org/10.1016/j.actamat.2020.04.060	journal	August 2020
Stress and deformation evaluations of scanning strategy effect in selective laser melting Cheng, Bo; Shrestha, Subin; Chou, Kevin Additive Manufacturing, Vol. 12 https://doi.org/10.1016/j.addma.2016.05.007	journal	October 2016
Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys Catchpole-Smith, S.; Aboulkhair, N.; Parry, L. Additive Manufacturing, Vol. 15 https://doi.org/10.1016/j.addma.2017.02.002	journal	May 2017
A semi-analytical thermal modelling approach for selective laser melting Yang, Y.; Knol, M. F.; van Keulen, F. Additive Manufacturing, Vol. 21 https://doi.org/10.1016/j.addma.2018.03.002	journal	May 2018
Fast prediction of thermal distortion in metal powder bed fusion additive manufacturing: Part 2, a quasi-static thermo-mechanical model Peng, Hao; Ghasri-Khouzani, Morteza; Gong, Shan Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.05.001	journal	August 2018
Geometrical effects on residual stress in selective laser melting Parry, L. A.; Ashcroft, I. A.; Wildman, R. D. Additive Manufacturing, Vol. 25 https://doi.org/10.1016/j.addma.2018.09.026	journal	January 2019
Reducing residual stress by selective large-area diode surface heating during laser powder bed fusion additive manufacturing Roehling, John D.; Smith, William L.; Roehling, Tien T. Additive Manufacturing, Vol. 28 https://doi.org/10.1016/j.addma.2019.05.009	journal	August 2019
New scanning strategy to reduce warpage in additive manufacturing Ramos, Davi; Belblidia, Fawzi; Sienz, Johann Additive Manufacturing, Vol. 28 https://doi.org/10.1016/j.addma.2019.05.016	journal	August 2019
Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing Yeung, Ho; Lane, Brandon; Fox, Jason Additive Manufacturing, Vol. 30 https://doi.org/10.1016/j.addma.2019.100844	journal	December 2019
A computationally efficient thermal model for selective laser melting Yang, Y.; van Keulen, F.; Ayas, C. Additive Manufacturing, Vol. 31 https://doi.org/10.1016/j.addma.2019.100955	journal	January 2020
Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing Druzgalski, C. L.; Ashby, A.; Guss, G. Additive Manufacturing, Vol. 34 https://doi.org/10.1016/j.addma.2020.101169	journal	August 2020
Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing Halsey, William; Ferguson, James; Plotkowski, Alex Additive Manufacturing, Vol. 35 https://doi.org/10.1016/j.addma.2020.101354	journal	October 2020
Scanning strategies effect on temperature, residual stress and deformation by multi-laser beam powder bed fusion manufacturing Zhang, Wenyou; Tong, Mingming; Harrison, Noel M. Additive Manufacturing, Vol. 36 https://doi.org/10.1016/j.addma.2020.101507	journal	December 2020
Island scanning pattern optimization for residual deformation mitigation in laser powder bed fusion via sequential inherent strain method and sensitivity analysis Chen, Qian; Taylor, Hunter; Takezawa, Akihiro Additive Manufacturing, Vol. 46 https://doi.org/10.1016/j.addma.2021.102116	journal	October 2021
Physics of large-area pulsed laser powder bed fusion Roehling, John D.; Khairallah, Saad A.; Shen, Yiyu Additive Manufacturing, Vol. 46 https://doi.org/10.1016/j.addma.2021.102186	journal	October 2021
Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications Masoomi, Mohammad; Thompson, Scott M.; Shamsaei, Nima International Journal of Machine Tools and Manufacture, Vol. 118-119 https://doi.org/10.1016/j.ijmachtools.2017.04.007	journal	August 2017
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing Mukherjee, T.; DebRoy, T. Journal of Manufacturing Processes, Vol. 36 https://doi.org/10.1016/j.jmapro.2018.10.028	journal	December 2018
Selective laser melting of iron-based powder Kruth, J. P.; Froyen, L.; Van Vaerenbergh, J. Journal of Materials Processing Technology, Vol. 149, Issue 1-3 https://doi.org/10.1016/j.jmatprotec.2003.11.051	journal	June 2004
Selective Laser Melting of thin wall parts using pulse shaping Mumtaz, K. A.; Hopkinson, N. Journal of Materials Processing Technology, Vol. 210, Issue 2 https://doi.org/10.1016/j.jmatprotec.2009.09.011	journal	January 2010
Metal additive manufacturing in the commercial aviation industry: A review Gisario, Annamaria; Kazarian, Michele; Martina, Filomeno Journal of Manufacturing Systems, Vol. 53 https://doi.org/10.1016/j.jmsy.2019.08.005	journal	October 2019
Instabilities in spatially extended predator–prey systems: Spatio-temporal patterns in the neighborhood of Turing–Hopf bifurcations Baurmann, Martin; Gross, Thilo; Feudel, Ulrike Journal of Theoretical Biology, Vol. 245, Issue 2 https://doi.org/10.1016/j.jtbi.2006.09.036	journal	March 2007
Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting Hussein, Ahmed; Hao, Liang; Yan, Chunze Materials & Design (1980-2015), Vol. 52 https://doi.org/10.1016/j.matdes.2013.05.070	journal	December 2013
A residual heat compensation based scan strategy for powder bed fusion additive manufacturing Yeung, H.; Lane, B. Manufacturing Letters, Vol. 25 https://doi.org/10.1016/j.mfglet.2020.07.005	journal	August 2020
Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF) Yu, Jun; Lin, Xin; Ma, Liang Materials Science and Engineering: A, Vol. 528, Issue 3 https://doi.org/10.1016/j.msea.2010.09.078	journal	January 2011
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V Qiu, Chunlei; Adkins, Nicholas J. E.; Attallah, Moataz M. Materials Science and Engineering: A, Vol. 578 https://doi.org/10.1016/j.msea.2013.04.099	journal	August 2013
Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism Han, Quanquan; Mertens, Raya; Montero-Sistiaga, Maria L. Materials Science and Engineering: A, Vol. 732 https://doi.org/10.1016/j.msea.2018.07.008	journal	August 2018
Material modeling of Ti–6Al–4V alloy processed by laser powder bed fusion for application in macro-scale process simulation Bartsch, Katharina; Herzog, Dirk; Bossen, Bastian Materials Science and Engineering: A, Vol. 814 https://doi.org/10.1016/j.msea.2021.141237	journal	May 2021
Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 ∘C Müller, A. v.; Schlick, G.; Neu, R. Nuclear Materials and Energy, Vol. 19 https://doi.org/10.1016/j.nme.2019.02.034	journal	May 2019
Fluctuations in the Abundance of a Species considered Mathematically1 Volterra, Vito Nature, Vol. 118, Issue 2972 https://doi.org/10.1038/118558a0	journal	October 1926
Dynamics of pore formation during laser powder bed fusion additive manufacturing Martin, Aiden A.; Calta, Nicholas P.; Khairallah, Saad A. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-10009-2	journal	April 2019
Long-term cyclic persistence in an experimental predator–prey system Blasius, Bernd; Rudolf, Lars; Weithoff, Guntram Nature, Vol. 577, Issue 7789 https://doi.org/10.1038/s41586-019-1857-0	journal	December 2019
Determination and controlling of grain structure of metals after laser incidence: Theoretical approach Dezfoli, Amir Reza Ansari; Hwang, Weng-Sing; Huang, Wei-Chin Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/srep41527	journal	January 2017
Defect-free laser powder bed fusion of Ti–48Al–2Cr–2Nb with a high temperature inductive preheating system Caprio, Leonardo; Demir, Ali Gökhan; Chiari, Gianmarco Journal of Physics: Photonics, Vol. 2, Issue 2 https://doi.org/10.1088/2515-7647/ab7080	journal	February 2020
Ant colony system: a cooperative learning approach to the traveling salesman problem Dorigo, M.; Gambardella, L. M. IEEE Transactions on Evolutionary Computation, Vol. 1, Issue 1 https://doi.org/10.1109/4235.585892	journal	April 1997
Ultra-Miniaturized Low-Profile Angularly-Stable Frequency Selective Surface Design Yin, Weiyang; Zhang, Hou; Zhong, Tao IEEE Transactions on Electromagnetic Compatibility, Vol. 61, Issue 4 https://doi.org/10.1109/TEMC.2018.2881161	journal	August 2019
Thermal Modeling in Metal Additive Manufacturing Using Graph Theory Yavari, M. Reza; Cole, Kevin D.; Rao, Prahalada Journal of Manufacturing Science and Engineering, Vol. 141, Issue 7 https://doi.org/10.1115/1.4043648	journal	May 2019
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing Khairallah, Saad A.; Martin, Aiden A.; Lee, Jonathan R. I. Science, Vol. 368, Issue 6491 https://doi.org/10.1126/science.aay7830	journal	May 2020
Additive manufacturing of materials: Opportunities and challenges Babu, S. S.; Love, L.; Dehoff, R. MRS Bulletin, Vol. 40, Issue 12 https://doi.org/10.1557/mrs.2015.234	journal	November 2015
Further Studies of Interaction between Predators and Prey Gause, G. F.; Smaragdova, N. P.; Witt, A. A. The Journal of Animal Ecology, Vol. 5, Issue 1 https://doi.org/10.2307/1087	journal	May 1936
Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel Gunenthiram, Valérie; Peyre, Patrice; Schneider, Matthieu Journal of Laser Applications, Vol. 29, Issue 2 https://doi.org/10.2351/1.4983259	journal	May 2017
The Effects of Selective Laser Melting scan Strategies on Deviation of Hybrid Parts Hagedorn-Hansen, Devon; Bezuidenhout, Martin; Dimitrov, Dimitar South African Journal of Industrial Engineering, Vol. 28, Issue 3 https://doi.org/10.7166/28-3-1862	journal	November 2017

Similar Records

Numerical analysis of rotating scans’ effect on surface roughness in laser-powder bed fusion

Journal Article · 2024 · Journal of Materials Research and Technology · OSTI ID:2367423

Gao, Xuesong; Aryan, Aryan; Zhang, Wei

Chemical recovery of spent copper powder in laser powder bed fusion

Journal Article · 2022 · Additive Manufacturing · OSTI ID:2301710

Speidel, Alistair; Gargalis, Leonidas; Ye, Jianchao; +5 more

Denudation of metal powder layers in laser powder bed fusion processes

Journal Article · 2016 · Acta Materialia · OSTI ID:1253936

Matthews, Manyalibo J.; Guss, Gabe; Khairallah, Saad A.; +3 more

Title: A spiral laser scanning routine for powder bed fusion inspired by natural predator-prey behaviour

Citation Formats

References (48)

Similar Records

Related Subjects