Title: Defect and satellite characteristics of additive manufacturing metal powders

Journal Article · · Advanced Powder Technology
 [1];  [1];  [1];  [2];  [1];  [1];  [1]
  1. Argonne National Lab. (ANL), Argonne, IL (United States)
  2. Iowa State Univ., Ames, IA (United States)

Metal additive manufacturing (AM) requires high-quality metal powders to three-dimensionally (3D) print metallic components with complex and customizable geometries. The lack of quantification of AM metal powders creates quality control challenges for 3D printed components, increases the uncertainty of printing reliability and net cost of inspected and certified printed components, and reduces the recyclability of used powders. However, critical characteristics of AM metal powders that are decisive factors for the 3D printing process, such as internal porosity, contamination, and satellite feature, remain ambiguous. In this work, we developed a novel approach to 3D quantify key characteristics of AM metal powders down to individual particles by using high-resolution synchrotron x-ray computed tomography. Empowered by the penetrative capability of high-energy x-ray, internal porosity and contamination within as-atomized metal powders from high-entropy alloys to nickel-based superalloys were evaluated. Additionally, the newly-developed dispersion method enables the homogeneous separation of individual particles, and consequently, results in the implementation of 3D particle shape analysis. To resolve a major challenge of identification and quantification of satellite-feature particles in as-atomized AM metal powders, the satellite features were quantitated by modeling and analyzing the shape parameter of local thickness variance. Furthermore, the 3D analytical methods of particle assessment in this study can be applied to other materials systems like rock, food, and pharmaceutical particles, and provide insights for process optimization across powder metallurgy, concrete, food and pharmaceutical manufacturing, and AM industries.

Research Organization:
Ames Laboratory (AMES), Ames, IA (United States); Argonne National Laboratory (ANL), Argonne, IL (United States). Advanced Photon Source (APS); Argonne National Laboratory (ANL), Argonne, IL (United States). Center for Nanoscale Materials (CNM)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Energy Efficiency Office. Advanced Manufacturing Office; USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities Division
Grant/Contract Number:
AC02-06CH11357; AC02-07CH11358
OSTI ID:
1868924
Report Number(s):
IS-J-10,731; 171459
Journal Information:
Advanced Powder Technology, Journal Name: Advanced Powder Technology Journal Issue: 3 Vol. 33; ISSN 0921-8831
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (37)

Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes journal May 2004
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review journal December 2017
Gas atomization of γ‐TiAl Alloy Powder for Additive Manufacturing journal November 2019
A Statistical Analysis of Powder Flowability in Metal Additive Manufacturing journal June 2020
Fabrication of Spherical AlSi10Mg Powders by Radio Frequency Plasma Spheroidization journal February 2016
Additive Manufacturing of Metallic Materials: A Review journal May 2017
High-Energy X-ray Tomographic Analysis of Precursor Metal Powders (Ti-6Al-4V) Used for Additive Manufacturing journal November 2020
Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V journal January 2017
Probing Ultrafast Dynamics in Laser Powder Bed Fusion Using High-Speed X-Ray Imaging: A Review of Research at the Advanced Photon Source journal January 2020
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing journal July 2015
Characterization of entrapped gases in rapidly solidified powders journal April 1990
Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing journal October 2017
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging journal June 2018
Comparison in characteristic and atomization behavior of metallic powders produced by plasma rotating electrode process journal May 2020
BoneJ: Free and extensible bone image analysis in ImageJ journal December 2010
Feedstock powder processing research needs for additive manufacturing development journal February 2018
Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding journal June 2020
Additive manufacturing of high entropy alloys: A practical review journal June 2021
Sphericity and roundness computation for particles using the extreme vertices model journal January 2019
Application of X-ray computed tomography for the characterization of graphite morphology in compact-graphite iron journal July 2018
Additive manufacturing of Ti6Al4V alloy: A review journal February 2019
Standard method for microCT-based additive manufacturing quality control 4: Metal powder analysis journal January 2018
Additive manufacturing using water atomized steel powders journal March 2017
Additive manufacturing powder feedstock characterization using X-ray tomography journal June 2018
Microstructural development in equiatomic multicomponent alloys journal July 2004
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder journal November 2017
Steels in additive manufacturing: A review of their microstructure and properties journal January 2020
Additive manufacturing of metallic components – Process, structure and properties journal March 2018
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting journal December 2019
3D quantitative shape analysis on form, roundness, and compactness with μCT journal April 2016
A review of powder additive manufacturing processes for metallic biomaterials journal March 2018
A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization journal June 2018
A new method for the model‐independent assessment of thickness in three‐dimensional images journal January 1997
Additive manufacturing of metallic components by selective electron beam melting — a review journal March 2016
Volume, Shape, and Roundness of Rock Particles journal July 1932
Additive Manufacturing of Nickel-Based Superalloys
  • Graybill, Benjamin; Li, Ming; Malawey, David
  • ASME 2018 13th International Manufacturing Science and Engineering Conference, Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing https://doi.org/10.1115/MSEC2018-6666
conference September 2018
Additive Manufacturing of High-Entropy Alloys: A Review journal December 2018