Developing solid-surface plasma facing components for pilot plants and reactors with replenishable wall claddings and continuous surface conditioning. Part B: required research in present tokamaks

Journal Article · 17 March 2022 · Plasma Physics and Controlled Fusion

DOI: https://doi.org/10.1088/1361-6587/ac55f8 · OSTI ID:1866145

Stangeby, P. C. ; Unterberg, E. A. ; Davis, J. W.; Abrams, T. ; Bortolon, A.; Bykov, I.; Donovan, D.; Guo, H. Y.; Kolasinski, R.; Leonard, A. W. ; Nichols, J. H.; Sinclair, G. ; Rudakov, D. L. ; Thomas, D. M.; Watkins, J. G.

Abstract The companion part A paper (Stangeby et al 2022) reports a number of independent estimates indicating that high-duty-cycle DT tokamaks starting with pilot plants will likely experience rates of net erosion and deposition of solid PFC, plasma facing component, material in the range of 10 ³ to 10 ⁴ kg yr ⁻¹ , regardless of the material used. The subsequent redeposition of such large quantities of material has the potential for major interference with tokamak operation. Similar levels and issues will be involved if ∼continuous low-Z powder dropping is used for surface conditioning of DT tokamaks, independent of the material used for the PFC armor. In Stangeby et al (2022) (part A) it is proposed that for high-duty-cycle DT tokamaks, non-metallic low-Z refractory materials such as ceramics (graphite, SiC, etc) used as in situ replenishable, relatively thin—of order mm—claddings on a substrate which is resistant to neutron damage could provide a potential solution for protecting the main walls, while reducing the risk of degrading the confined plasma. Assessment of whether such an approach is viable will require information, much of which is not available today. Section 6 of part A identifies a partial list of major physics questions that will need to be answered in order to make an informed assessment. This part B report describes R&D needed to be done in present tokamaks in order to answer many of these questions. Most of the required R&D is to establish better understanding of low-Z slag generation and to identify means to safely manage it. Powder droppers provide a unique opportunity to carry out controlled studies on the management of low-Z slag in current tokamaks, independent of whether their protection tiles use low-Z or high-Z material.

• Research Organization: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Princeton Plasma Physics Laboratory (PPPL), Princeton, NJ (United States)
• Sponsoring Organization: USDOE; USDOE Office of Science (SC); USDOE Office of Science (SC), Fusion Energy Sciences (FES)
• Grant/Contract Number: AC02-09CH11466; AC05-00OR22725; FC02-04ER54698; FG02-07ER54917; NA0003525; SC0019256
• OSTI ID: 1866145
• Journal Information: Plasma Physics and Controlled Fusion, Journal Name: Plasma Physics and Controlled Fusion Journal Issue: 5 Vol. 64; ISSN 0741-3335
• Publisher: IOP PublishingCopyright Statement
• Country of Publication: United Kingdom
• Language: English