DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Enhanced critical axial tensile strain limit of CORC ® wires: FEM and analytical modeling

Journal Article · · Superconductor Science and Technology

Abstract Conductor on Round Core (CORC ® ) cables and wires are composed of spiraled high-temperature superconducting (HTS) rare-earth barium copper oxide (REBCO) tapes, wound in multiple layers, and can carry very high currents in background magnetic fields of more than 20 T. They combine isotropic flexibility and high resilience to electromagnetic and thermal loads. The brittle nature of HTS tapes limits the maximum allowable axial tensile strain in superconducting cables. An intrinsic tensile strain above about 0.45% will introduce cracks in the REBCO layer of straight HTS tapes resulting in irreversible damage. The helical fashion at which the REBCO tapes are wound around the central core allows tapes to experience only a fraction of the total axial tensile strain applied to the CORC ® wire. As a result, the critical strain limit of CORC ® wires can be increased by a factor of more than 10 that of REBCO tapes. Finite element (FE) and analytical models are developed to predict the performance of CORC ® wires under axial tensile strain. A parametric analysis is carried out by varying the winding angle, the Poisson’s ratio of the CORC ® wire core, the core diameter, and the tape width. The results show that a small variation in winding angle can have a significant impact on the cable’s axial tensile strain tolerance. While the radial contraction of the helically wound tapes in a CORC ® wire under axial tensile strain depends on its winding angle, it is mostly driven by the Poisson’s ratio of the central core, affecting the tape strain state and thus its performance. Contact pressure from multiple layers within the CORC ® wire also affects the CORC ® wire performance. The FE model can be used to optimize the cable design for specific application conditions, resulting in an irreversible strain limit of CORC ® cables and wires as high as 7%.

Sponsoring Organization:
USDOE Office of Science (SC), High Energy Physics (HEP); USDOE Office of Science (SC), Fusion Energy Sciences (FES)
Grant/Contract Number:
SC0014009
OSTI ID:
1856288
Journal Information:
Superconductor Science and Technology, Journal Name: Superconductor Science and Technology Journal Issue: 5 Vol. 35; ISSN 0953-2048
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
United Kingdom
Language:
English

References (19)

Conceptual design of HTS magnets for fusion nuclear science facility journal July 2021
Overview of the SPARC tokamak journal September 2020
Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applications journal January 2007
Influence of processing methods on residual stress evolution in coated conductors journal November 2004
Internal residual strain and critical current maximum of a surrounded Cu stabilized YBCO coated conductor journal April 2009
YBa 2 Cu 3 O 7−δ coated conductor cabling for low ac-loss and high-field magnet applications journal April 2009
Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future journal August 2014
Experiments and FE modeling of stress–strain state in ReBCO tape under tensile, torsional and transverse load journal March 2015
Introduction of CORC ® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applications journal November 2016
Out-of-plane bending characteristics of second generation high temperature superconducting tapes journal June 2017
Bending of CORC ® cables and wires: finite element parametric study and experimental validation journal October 2018
Effect of transverse compressive monotonic and cyclic loading on the performance of superconducting CORC ® cables and wires journal November 2018
Status of CORC ® cables and wires for use in high-field magnets and power systems a decade after their introduction journal February 2019
Effect of monotonic and cyclic axial tensile stress on the performance of superconducting CORC ® wires journal March 2019
Introduction of the next generation of CORC ® wires with engineering current density exceeding 650 A mm −2 at 12 T based on SuperPower’s ReBCO tapes containing substrates of 25 μ m thickness journal February 2020
Superconductors for fusion: a roadmap journal September 2021
High-temperature superconducting CORC ® wires with record-breaking axial tensile strain tolerance present a breakthrough for high-field magnets journal September 2021
Present Status and Recent Developments of the Twisted Stacked-Tape Cable Conductor journal March 2016
The Contact Behavior of the CORC Wires Under Stretching Process journal June 2020