Aerosol printing and flash sintering of conformal conductors on 3D nonplanar surfaces

Chen, I-Meng; Liu, Yangtao; Yu, Xiaowei; Everhart, Wesley; Park, Jonghyun; Wang, Yan; Pan, Heng

doi:10.1016/j.mfglet.2021.09.007

Title: Aerosol printing and flash sintering of conformal conductors on 3D nonplanar surfaces

Journal Article · 01 January 2022 · Manufacturing Letters

DOI: https://doi.org/10.1016/j.mfglet.2021.09.007 · OSTI ID:1846048

Chen, I-Meng; Liu, Yangtao;

; Everhart, Wesley; Park, Jonghyun; Wang, Yan; Pan, Heng

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 1846048

Journal Information:: Manufacturing Letters, Journal Name: Manufacturing Letters Journal Issue: C Vol. 31; ISSN 2213-8463

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (34)

The Effect of Droplet Sizes on Overspray in Aerosol-Jet Printing Chen, Guang; Gu, Yuan; Tsang, Harvey Advanced Engineering Materials, Vol. 20, Issue 8 https://doi.org/10.1002/adem.201701084	journal	April 2018
Direct Ink Writing of 3D Functional Materials Lewis, J. A. Advanced Functional Materials, Vol. 16, Issue 17 https://doi.org/10.1002/adfm.200600434	journal	November 2006
Biocompatible and Flexible Chitosan-Based Resistive Switching Memory with Magnesium Electrodes Hosseini, Niloufar Raeis; Lee, Jang-Sik Advanced Functional Materials, Vol. 25, Issue 35 https://doi.org/10.1002/adfm.201502592	journal	August 2015
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces Adams, Jacob J.; Duoss, Eric B.; Malkowski, Thomas F. Advanced Materials, Vol. 23, Issue 11 https://doi.org/10.1002/adma.201003734	journal	January 2011
Multifunctional Epidermal Electronics Printed Directly Onto the Skin Yeo, Woon-Hong; Kim, Yun-Soung; Lee, Jongwoo Advanced Materials, Vol. 25, Issue 20, p. 2773-2778 https://doi.org/10.1002/adma.201204426	journal	February 2013
Nanorecycling: Monolithic Integration of Copper and Copper Oxide Nanowire Network Electrode through Selective Reversible Photothermochemical Reduction Han, Seungyong; Hong, Sukjoon; Yeo, Junyeob Advanced Materials, Vol. 27, Issue 41 https://doi.org/10.1002/adma.201503244	journal	September 2015
Recent Progress in Materials and Devices toward Printable and Flexible Sensors Rim, You Seung; Bae, Sang-Hoon; Chen, Huajun Advanced Materials, Vol. 28, Issue 22 https://doi.org/10.1002/adma.201505118	journal	February 2016
Customizable Nonplanar Printing of Lithium‐Ion Batteries Yu, Xiaowei; Liu, Yangtao; Pham, Hiep Advanced Materials Technologies, Vol. 4, Issue 11 https://doi.org/10.1002/admt.201900645	journal	August 2019
Fabrication Techniques for Curved Electronics on Arbitrary Surfaces Wu, Hao; Tian, Yu; Luo, Haibo Advanced Materials Technologies, Vol. 5, Issue 8 https://doi.org/10.1002/admt.202000093	journal	May 2020
Recent Progress on Printed Flexible Batteries: Mechanical Challenges, Printing Technologies, and Future Prospects Gaikwad, Abhinav M.; Arias, Ana Claudia; Steingart, Daniel A. Energy Technology, Vol. 3, Issue 4 https://doi.org/10.1002/ente.201402182	journal	March 2015
Printable electronics: flexibility for the future Leenen, Mark A. M.; Arning, Volker; Thiem, Heiko physica status solidi (a), Vol. 206, Issue 4 https://doi.org/10.1002/pssa.200824428	journal	April 2009
Mechanically Milled Irregular Zinc Nanoparticles for Printable Bioresorbable Electronics Mahajan, Bikram K.; Yu, Xiaowei; Shou, Wan Small, Vol. 13, Issue 17 https://doi.org/10.1002/smll.201700065	journal	February 2017
A review of aerosol jet printing—a non-traditional hybrid process for micro-manufacturing Wilkinson, N. J.; Smith, M. A. A.; Kay, R. W. The International Journal of Advanced Manufacturing Technology, Vol. 105, Issue 11 https://doi.org/10.1007/s00170-019-03438-2	journal	May 2019
Understanding the role of Nanomorphology on Resistance Evolution in the Hybrid Form-Fuse Process for Conformal Electronics Devaraj, Harish; Hwang, Hyun-Jun; Malhotra, Rajiv Journal of Manufacturing Processes, Vol. 58 https://doi.org/10.1016/j.jmapro.2020.08.066	journal	October 2020
Ink-jet printed porous composite LiFePO 4 electrode from aqueous suspension for microbatteries Delannoy, P. -E.; Riou, B.; Brousse, T. Journal of Power Sources, Vol. 287 https://doi.org/10.1016/j.jpowsour.2015.04.067	journal	August 2015
3-Dimensional inkjet printing of macro structures from silver nanoparticles Vaithilingam, Jayasheelan; Saleh, Ehab; Körner, Lars Materials & Design, Vol. 139 https://doi.org/10.1016/j.matdes.2017.10.070	journal	February 2018
A bio-inspired method to inkjet-printing copper pattern on polyimide substrate Wang, Yanqing; Li, Ning; Li, Deyu Materials Letters, Vol. 140 https://doi.org/10.1016/j.matlet.2014.11.006	journal	February 2015
Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics Chiolerio, A.; Maccioni, G.; Martino, P. Microelectronic Engineering, Vol. 88, Issue 8 https://doi.org/10.1016/j.mee.2010.12.099	journal	August 2011
Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistors Norita, Shohei; Kumaki, Daisuke; Kobayashi, Yu Organic Electronics, Vol. 25 https://doi.org/10.1016/j.orgel.2015.06.026	journal	October 2015
Direct writing of copper conductive patterns by ink-jet printing Park, Bong Kyun; Kim, Dongjo; Jeong, Sunho Thin Solid Films, Vol. 515, Issue 19 https://doi.org/10.1016/j.tsf.2006.11.142	journal	July 2007
High-Concentration Synthesis of Sub-10-nm Copper Nanoparticles for Application to Conductive Nanoinks Hokita, Yuki; Kanzaki, Mai; Sugiyama, Tomonori ACS Applied Materials & Interfaces, Vol. 7, Issue 34 https://doi.org/10.1021/acsami.5b05542	journal	August 2015
High-Fidelity Conformal Printing of 3D Liquid Alloy Circuits for Soft Electronics Zhang, Shuo; Wang, Bei; Jiang, Jiajun ACS Applied Materials & Interfaces, Vol. 11, Issue 7 https://doi.org/10.1021/acsami.8b20595	journal	January 2019
Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines Mahajan, Ankit; Frisbie, C. Daniel; Francis, Lorraine F. ACS Applied Materials & Interfaces, Vol. 5, Issue 11 https://doi.org/10.1021/am400606y	journal	May 2013
Direct Intense Pulsed Light Sintering of Inkjet-Printed Copper Oxide Layers within Six Milliseconds Kang, Hyunkyoo; Sowade, Enrico; Baumann, Reinhard R. ACS Applied Materials & Interfaces, Vol. 6, Issue 3 https://doi.org/10.1021/am404581b	journal	January 2014
Low-Cost Inorganic Solar Cells: From Ink To Printed Device Habas, Susan E.; Platt, Heather A. S.; van Hest, Maikel F. A. M. Chemical Reviews, Vol. 110, Issue 11, p. 6571-6594 https://doi.org/10.1021/cr100191d	journal	November 2010
Materials and Applications for Large Area Electronics: Solution-Based Approaches Arias, Ana Claudia; MacKenzie, J. Devin; McCulloch, Iain Chemical Reviews, Vol. 110, Issue 1 https://doi.org/10.1021/cr900150b	journal	January 2010
Stretchable organic memory: toward learnable and digitized stretchable electronic applications Lai, Ying-Chih; Huang, Yi-Chuan; Lin, Tai-Yuan NPG Asia Materials, Vol. 6, Issue 2 https://doi.org/10.1038/am.2013.85	journal	February 2014
Switchable disposable passive RFID vapour sensors from inkjet printed electronic components integrated with PDMS as a stimulus responsive material Belsey, K. E.; Parry, A. V. S.; Rumens, C. V. Journal of Materials Chemistry C, Vol. 5, Issue 12 https://doi.org/10.1039/C6TC05509E	journal	January 2017
3D polymer objects with electronic components interconnected via conformally printed electrodes Jo, Yejin; Kim, Ju Young; Jung, Sungmook Nanoscale, Vol. 9, Issue 39 https://doi.org/10.1039/C7NR04111J	journal	January 2017
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials Perelaer, Jolke; Smith, Patrick J.; Mager, Dario Journal of Materials Chemistry, Vol. 20, Issue 39 https://doi.org/10.1039/c0jm00264j	journal	January 2010
Fully printed silicon field effect transistors Härting, M.; Zhang, J.; Gamota, D. R. Applied Physics Letters, Vol. 94, Issue 19 https://doi.org/10.1063/1.3126958	journal	May 2009
Scalable Forming and Flash Light Sintering of Polymer-Supported Interconnects for Surface-Conformal Electronics Devaraj, Harish; Malhotra, Rajiv Journal of Manufacturing Science and Engineering, Vol. 141, Issue 4 https://doi.org/10.1115/1.4042610	journal	February 2019
Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing Saleh, Mohammad Sadeq; Hu, Chunshan; Panat, Rahul Science Advances, Vol. 3, Issue 3 https://doi.org/10.1126/sciadv.1601986	journal	March 2017
Printed Transparent Thin Film Zn-MnO ₂ Battery Lao-atiman, Woranunt; Julaphatachote, Thanatham; Boonmongkolras, Passarut Journal of The Electrochemical Society, Vol. 164, Issue 4 https://doi.org/10.1149/2.1511704jes	journal	January 2017

Similar Records

3D Printed Alumina for Geometrically-Complex Electronic Substrates With High-Performance Printed Conductors

Journal Article · 2024 · IEEE Access · OSTI ID:2382731

Gomez, Alexander; Yelamanchi, Bharat; Maurel, Alexis; +8 more

The electrical sintering and fusing effects of Aerosol-Jet printed silver conductive line

Journal Article · 2019 · Materials Letters · OSTI ID:1682445

He, Chao; Jin, Ning; Yu, Haoran; +2 more

3D Conformal Printing and Photonic Sintering of High-Performance Flexible Thermoelectric Films Using 2D Nanoplates

Journal Article · 2019 · Advanced Functional Materials · OSTI ID:1613957

Saeidi‐Javash, Mortaza; Kuang, Wenzheng; Dun, Chaochao; +1 more

Title: Aerosol printing and flash sintering of conformal conductors on 3D nonplanar surfaces

Citation Formats

References (34)

Similar Records

Related Subjects