Effects of applied stress and grain size on creep-rupture lifetime prediction for Haynes 282 alloy

Santella, Michael L.; Tortorelli, Peter F.; Render, Mark; Pint, Bruce; Wang, Hong; Cedro III, Vito; Chen, Xiang

doi:10.1016/j.msea.2022.142785

Title: Effects of applied stress and grain size on creep-rupture lifetime prediction for Haynes 282 alloy

Journal Article · 07 February 2022 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI: https://doi.org/10.1016/j.msea.2022.142785 · OSTI ID:1845775

^[1];

^[2];

^[1];

^[1]; Cedro III, Vito ^[2];

^[1]

Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
National Energy Technology Lab. (NETL), Morgantown, WV (United States)

A multiple-heat set of tensile and creep-rupture data generated from a single laboratory was used to establish and evaluate predictive equations for the average creep-limited lifetime of an aged wrought Haynes 282 alloy using two different time- and temperature-compensated parametric models (those of Larson and Miller and Wilshire et al.). The range of temperatures and stresses used to produce the creep-rupture data used in the analyses revealed that two distinct regimes, above and below the proportional limit, were necessary for more accurate predictions of creep lifetimes over the range of conditions studied. Furthermore, a 2x difference in grain size amongst the three heats revealed a breakdown in the relationship between ultimate tensile strength and creep-rupture time, thus impacting the predictive ability of the Wilshire model. Finally, lifetime predictions based on the formulations from the respective models were compared to other available Haynes 282 datasets and found to reasonably replicate the experimental trends established in other studies.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE; USDOE Office of Fossil Energy (FE)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1845775

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: N Vol. 838; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (41)

Modeling microstructural development during the forging of Waspaloy Shen, Gangshu; Semiatin, S. L.; Shivpuri, Rajiv Metallurgical and Materials Transactions A, Vol. 26, Issue 7 https://doi.org/10.1007/BF02670767	journal	July 1995
Micro-mechanism during long-term creep of a precipitation-strengthened Ni-based superalloy Song, Xiaoqing; Tang, Liying; Chen, Zheng Journal of Materials Science, Vol. 52, Issue 8 https://doi.org/10.1007/s10853-016-0703-0	journal	December 2016
Effect of Pressure and Thermal Cycling on Long-Term Oxidation in CO2 and Supercritical CO2 Pint, B. A.; Pillai, R.; Lance, M. J. Oxidation of Metals, Vol. 94, Issue 5-6 https://doi.org/10.1007/s11085-020-10004-9	journal	November 2020
Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy Monajati, H.; Taheri, A. K.; Jahazi, M. Metallurgical and Materials Transactions A, Vol. 36, Issue 4 https://doi.org/10.1007/s11661-005-0284-z	journal	April 2005
Theoretical and practical implications of creep curve shape analyses for 7010 and 7075 Burt, H.; Wilshire, B. Metallurgical and Materials Transactions A, Vol. 37, Issue 3 https://doi.org/10.1007/s11661-006-0073-3	journal	March 2006
A Novel Approach to the Prediction of Long-Term Creep Fracture, with Application to 18Cr-12Ni-Mo Steel (Bar, Plate, and Tube) Evans, M. Metallurgical and Materials Transactions A, Vol. 41, Issue 2 https://doi.org/10.1007/s11661-009-0129-2	journal	December 2009
The Potential United Kingdom Energy Gap and Creep Life Prediction Methodologies Evans, Mark Metallurgical and Materials Transactions A, Vol. 44, Issue S1 https://doi.org/10.1007/s11661-012-1293-3	journal	October 2012
Tensile Properties and Deformation Mechanisms of Haynes 282 at Various Temperatures Zhang, P.; Yuan, Y.; Yin, H. Metallurgical and Materials Transactions A, Vol. 49, Issue 5 https://doi.org/10.1007/s11661-018-4515-5	journal	February 2018
Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H Render, M.; Santella, M. L.; Chen, X. Metallurgical and Materials Transactions A, Vol. 52, Issue 6 https://doi.org/10.1007/s11661-021-06253-1	journal	April 2021
Element partitioning during coarsening of (γ − γ′) Ni-Al-Mo alloys Fährmann, M.; Fährmann, E.; Pollock, T. M. Metallurgical and Materials Transactions A, Vol. 28, Issue 9 https://doi.org/10.1007/s11661-997-0124-4	journal	September 1997
Fatigue Crack Growth Behavior of Nickel-base Superalloy Haynes 282 at 550-750 °C Rozman, K. A.; Kruzic, J. J.; Hawk, J. A. Journal of Materials Engineering and Performance, Vol. 24, Issue 8 https://doi.org/10.1007/s11665-015-1588-9	journal	July 2015
Gamma Prime Stability in Haynes 282: Theoretical and Experimental Considerations Hawk, Jeffrey A.; Cheng, Tian-Le; Sears, John S. Journal of Materials Engineering and Performance, Vol. 24, Issue 11 https://doi.org/10.1007/s11665-015-1711-y	journal	September 2015
Microstructure and Hardness Evolution in Haynes 282 Nickel-Based Superalloy During Multi-variant Aging Heat Treatment Polkowska, Adelajda; Polkowski, Wojciech; Warmuzek, Małgorzata Journal of Materials Engineering and Performance, Vol. 28, Issue 7 https://doi.org/10.1007/s11665-019-3886-0	journal	January 2019
Simulation of γ′ Precipitation Kinetics in a Commercial Ni-Base Superalloy Fahrmann, M. G.; Metzler, D. A. JOM, Vol. 68, Issue 11 https://doi.org/10.1007/s11837-016-2097-5	journal	September 2016
Activation energy for superplastic deformation of IN718 superalloy Kashyap, B. P.; Chaturvedi, M. C. Scripta Materialia, Vol. 43, Issue 5 https://doi.org/10.1016/S1359-6462(00)00453-X	journal	August 2000
Supercritical CO2 Brayton cycles for solar-thermal energy Iverson, Brian D.; Conboy, Thomas M.; Pasch, James J. Applied Energy, Vol. 111 https://doi.org/10.1016/j.apenergy.2013.06.020	journal	November 2013
Supercritical CO2 Brayton cycles for coal-fired power plants Mecheri, Mounir; Le Moullec, Yann Energy, Vol. 103 https://doi.org/10.1016/j.energy.2016.02.111	journal	May 2016
Prediction of long-term creep rupture data for 18Cr–12Ni–Mo steel Evans, M. International Journal of Pressure Vessels and Piping, Vol. 88, Issue 11-12 https://doi.org/10.1016/j.ijpvp.2011.08.001	journal	December 2011
Creep and creep fracture of polycrystalline copper Wilshire, B.; Battenbough, A. J. Materials Science and Engineering: A, Vol. 443, Issue 1-2 https://doi.org/10.1016/j.msea.2006.08.094	journal	January 2007
A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™ Boehlert, C. J.; Longanbach, S. C. Materials Science and Engineering: A, Vol. 528, Issue 15 https://doi.org/10.1016/j.msea.2011.03.019	journal	June 2011
Cyclic deformation characteristics and fatigue crack growth behaviour of a newly developed aerospace superalloy Haynes 282 Buckson, R. A.; Ojo, O. A. Materials Science and Engineering: A, Vol. 555 https://doi.org/10.1016/j.msea.2012.06.034	journal	October 2012
Influences of composition and grain size on creep–rupture behavior of Inconel® alloy 740 Shingledecker, J. P.; Evans, N. D.; Pharr, G. M. Materials Science and Engineering: A, Vol. 578 https://doi.org/10.1016/j.msea.2013.04.087	journal	August 2013
Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes 282 Joseph, Ceena; Persson, Christer; Hörnqvist Colliander, Magnus Materials Science and Engineering: A, Vol. 679 https://doi.org/10.1016/j.msea.2016.10.048	journal	January 2017
Is there an optimal grain size for creep resistance in Ni-based disk superalloys? Thébaud, Louis; Villechaise, Patrick; Crozet, Coraline Materials Science and Engineering: A, Vol. 716 https://doi.org/10.1016/j.msea.2017.12.104	journal	February 2018
The performance of Haynes 282 and its weld in supercritical CO2 Brittan, Andrew; Mahaffey, Jacob; Anderson, Mark Materials Science and Engineering: A, Vol. 759 https://doi.org/10.1016/j.msea.2019.05.080	journal	June 2019
Nickel-Base Alloy Solutions for Ultrasupercritical Steam Power Plants Klarstrom, D. L.; Pike, L. M.; Ishwar, V. R. Procedia Engineering, Vol. 55 https://doi.org/10.1016/j.proeng.2013.03.246	journal	January 2013
Long-term creep life prediction for a high chromium steel Wilshire, B.; Scharning, P. J. Scripta Materialia, Vol. 56, Issue 8 https://doi.org/10.1016/j.scriptamat.2006.12.033	journal	April 2007
Single-step aging treatment for a precipitation-strengthened Ni-based alloy and its influence on high-temperature mechanical behavior Unocic, Kinga A.; Shin, Dongwon; Sang, Xiahan Scripta Materialia, Vol. 162 https://doi.org/10.1016/j.scriptamat.2018.11.045	journal	March 2019
Monovacancy and divacancy contributions to self-diffusion in face-centred cubic metals reanalysis for copper, silver, gold, nickel and platinum Neumann, G.; Tölle, V. Philosophical Magazine A, Vol. 54, Issue 5 https://doi.org/10.1080/01418618608244022	journal	November 1986
Semi-parametric estimation of the Wilshire creep life prediction model: an application to 2.25Cr-1Mo steel Evans, M. Materials Science and Technology, Vol. 35, Issue 16 https://doi.org/10.1080/02670836.2019.1659557	journal	September 2019
A Postassessment Test of 100,000 h Creep Rupture Strength of Grade 91 Steel at 600 °C Maruyama, K.; Sekido, N.; Yoshimi, K. Journal of Pressure Vessel Technology, Vol. 139, Issue 5 https://doi.org/10.1115/1.4037446	journal	August 2017
Metamodeling Time-Temperature Creep Parameters Haque, Mohammad Shafinul; Stewart, Calvin M. Journal of Pressure Vessel Technology, Vol. 142, Issue 3 https://doi.org/10.1115/1.4045887	journal	March 2020
HAYNES® 282™ Alloy: A New Wrought Superalloy Designed for Improved Creep Strength and Fabricability Pike, L. M. ASME Turbo Expo 2006: Power for Land, Sea, and Air, Volume 4: Cycle Innovations; Electric Power; Industrial and Cogeneration; Manufacturing Materials and Metallurgy https://doi.org/10.1115/GT2006-91204	conference	September 2008
Low-Cycle Fatigue Behavior of HAYNES® 282® Alloy and Other Wrought Gamma-Prime Strengthened Alloys Pike, L. M. ASME Turbo Expo 2007: Power for Land, Sea, and Air, Volume 5: Turbo Expo 2007 https://doi.org/10.1115/GT2007-28267	conference	March 2009
Long term creep life prediction for Grade 22 (2·25Cr—1Mo) steels Whittaker, M. T.; Wilshire, B. Materials Science and Technology, Vol. 27, Issue 3 https://doi.org/10.1179/026708310X520529	journal	March 2011
Prediction of long term creep data for forged 1Cr–1Mo–0·25V steel Wilshire, B.; Scharning, P. J. Materials Science and Technology, Vol. 24, Issue 1 https://doi.org/10.1179/174328407X245779	journal	January 2008
Theoretical and practical approaches to creep of Waspaloy Wilshire, B.; Scharning, P. J. Materials Science and Technology, Vol. 25, Issue 2 https://doi.org/10.1179/174328408X361508	journal	February 2009
Hot-deformation characteristics of Waspaloy Livesey, D. W.; Sellars, C. M. Materials Science and Technology, Vol. 1, Issue 2 https://doi.org/10.1179/mst.1985.1.2.136	journal	February 1985
Creep Deformation by Dislocation Movement in Waspaloy Whittaker, Mark; Harrison, Will; Deen, Christopher Materials, Vol. 10, Issue 1 https://doi.org/10.3390/ma10010061	journal	January 2017
Use of the Wilshire Equations to Correlate and Extrapolate Creep Data of HR6W and Sanicro 25 Cedro, Vito; Garcia, Christian; Render, Mark Materials, Vol. 11, Issue 9 https://doi.org/10.3390/ma11091585	journal	September 2018
Characterization of Hot Deformation Behavior and Dislocation Structure Evolution of an Advanced Nickel-Based Superalloy Yao, Zhihao; Wang, Hongying; Dong, Jianxin Metals, Vol. 10, Issue 7 https://doi.org/10.3390/met10070920	journal	July 2020

Similar Records

Effect of heterogeneous microstructure on the tensile and creep performances of cast Haynes 282 alloy

Journal Article · 2021 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1836452

Wang, Ling; Mao, Keyou; Tortorelli, Peter F.; +4 more

Predicting the creep-rupture lifetime of a cast austenitic stainless steel using Larson-Miller and Wilshire parametric approaches

Journal Article · 2023 · International Journal of Pressure Vessels and Piping · OSTI ID:1987793

Santella, Michael L.; Tortorelli, Peter F.; Render, Mark; +6 more

Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H

Journal Article · 2021 · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science · OSTI ID:1784135

Render, Mark; Santella, Michael L.; Chen, Xiang; +2 more

Related Subjects

36 MATERIALS SCIENCE
Haynes 282
Larson-Miller parameter
Ni-based superalloy
Wilshire model
creep rupture
life prediction

Title: Effects of applied stress and grain size on creep-rupture lifetime prediction for Haynes 282 alloy

Citation Formats

References (41)

Similar Records

Related Subjects