Title: Irradiation effects in tungsten—From surface effects to bulk mechanical properties

Journal Article · · Nuclear Materials and Energy
ORCiD logo [1];  [2]; ORCiD logo [3];  [1]; ORCiD logo [4];  [1];  [1];  [1];  [2]
  1. Max Planck Institute for Plasma Physics, Garching (Germany)
  2. Max Planck Institute for Plasma Physics, Garching (Germany); Technische Univ. München, Garching (Germany)
  3. Forschungszentrum Juelich (Germany). Inst. fur Energie- und Klimaforschung (IEK); Univ. of Wisconsin, Madison, WI (United States)
  4. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Advanced materials such as tungsten fibre-reinforced composites allow to overcome severe weaknesses of the baseline materials for plasma-facing components — copper and tungsten. The effect of the fusion environment on the mechanical properties of these materials, e.g. the embrittlement by neutron irradiation, plays a key role for the development of future fusion reactors. To simulate this effect, high-energy ions are used as a substitute for the displacement damage by neutrons. We propose the use of very fine tungsten wire as a possibility of studying the influence of irradiation damage on the mechanical properties. This is possible as they allow full-depth irradiation of almost the entire volume despite the limited penetration depth of ions. Geometrical size effects are mitigated due to the nanoscale microstructure of the wire. In addition, similar wire is used in tungsten fibre-reinforced composites. Thus, the investigation of irradiated wire can directly be used for the prediction of the bulk composite properties. For the proof of this concept tungsten wire with a diameter of 16 μm was electrochemically thinned to 5 μm and irradiated with 20.5 MeV W6+ ions. The mechanical properties were subsequently determined by macroscopic tensile testing. Irradiation to 0.3, 1 and 9 dpa did not lead to a change of the mechanical behaviour. Both strength and ductility, the latter indicated by the reduction of area, were similar to the as-fabricated state.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
EUROfusion Consortium; USDOE
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
1841489
Journal Information:
Nuclear Materials and Energy, Journal Name: Nuclear Materials and Energy Journal Issue: - Vol. 30; ISSN 2352-1791
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (45)

Fundamentals of Radiation Materials Science book January 2017
The relationship of microstructure to mechanical properties of Al-, Si-, K-doped tungsten wire journal January 1991
Recent advances in characterising irradiation damage in tungsten for fusion power journal November 2019
Tensile properties of neutron irradiated TZM and tungsten journal April 1976
Fracture modes in tungsten wire journal July 1976
Structural materials for fission & fusion energy journal November 2009
High temperature annealing of ion irradiated tungsten journal May 2015
Estimation of the fracture toughness of tungsten fibre-reinforced tungsten composites journal June 2020
Conceptual design studies for the European DEMO divertor: Rationale and first results journal November 2016
Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices journal November 2017
Tensile deformation behavior of tungsten fibre-reinforced tungsten composite specimens in as-fabricated state journal November 2017
European materials development: Results and perspective journal September 2019
100years of doped tungsten wire journal November 2010
Microstructure, mechanical behaviour and fracture of pure tungsten wire after different heat treatments journal November 2017
Micromechanical and microstructural properties of tungsten fibers in the as-produced and annealed state: Assessment of the potassium doping effect journal June 2019
Neutron irradiation hardening across ITER diverter tungsten armor journal February 2021
The effect of 800MeV proton irradiation on the mechanical properties of tungsten at room temperature and at 475°C journal August 2005
Small-scale characterisation of irradiated nuclear materials: Part II nanoindentation and micro-cantilever testing of ion irradiated nuclear materials journal July 2015
Simulation of neutron-induced damage in tungsten by irradiation with energetic self-ions journal May 2015
Neutron irradiation effects on the microstructural development of tungsten and tungsten alloys journal April 2016
Mechanical properties of single-crystal tungsten irradiated in a mixed spectrum fission reactor journal May 2019
Neutron irradiation effects on the mechanical properties of powder metallurgical processed tungsten alloys journal February 2020
Fracture-mechanical properties of neutron irradiated ITER specification tungsten journal April 2021
Radiation damage tolerant nanomaterials journal November 2013
Effect of dislocation density on improved radiation hardening resistance of nano-structured tungsten–rhenium journal August 2014
The effect of heat treatments on pure and potassium doped drawn tungsten wires: Part II – Fracture properties journal November 2018
Microstructure and defect analysis in the vicinity of blisters in polycrystalline tungsten journal August 2017
Deuterium retention in MeV self-implanted tungsten: Influence of damaging dose rate journal August 2017
Crack bridging in as-fabricated and embrittled tungsten single fibre-reinforced tungsten composites shown by a novel in-situ high energy synchrotron tomography bending test journal May 2018
Influence of the presence of deuterium on displacement damage in tungsten journal December 2018
Direct observation of mono-vacancy and self-interstitial recovery in tungsten journal February 2019
Neutron-induced transmutation effects in W and W-alloys in a fusion environment journal March 2011
Applicability of copper alloys for DEMO high heat flux components journal December 2015
Materials for DEMO and reactor applications—boundary conditions and new concepts journal December 2015
Development of tungsten fibre-reinforced tungsten composites towards their use in DEMO—potassium doped tungsten wire journal January 2016
Tensile behaviour of drawn tungsten wire used in tungsten fibre-reinforced tungsten composites journal October 2017
European DEMO design strategy and consequences for materials journal June 2017
Development of advanced high heat flux and plasma-facing materials journal June 2017
Overview of the DEMO staged design approach in Europe journal April 2019
Displacement damage stabilization by hydrogen presence under simultaneous W ion damage and D ion exposure journal July 2019
Fracture behavior of random distributed short tungsten fiber-reinforced tungsten composites journal July 2019
Deuterium retention in tungsten irradiated by different ions journal July 2020
Properties of drawn W wire used as high performance fibre in tungsten fibre-reinforced tungsten composite journal July 2016
Textile preforms for tungsten fibre-reinforced composites journal April 2018
Small scale mechanical testing of irradiated materials journal April 2015