Development and validation of SuperDEM for non-spherical particulate systems using a superquadric particle method

Gao, Xi; Yu, Jia; Portal, Ricardo J. F.; Dietiker, Jean-François; Shahnam, Mehrdad; Rogers, William A.

doi:10.1016/j.partic.2020.11.007

Title: Development and validation of SuperDEM for non-spherical particulate systems using a superquadric particle method

Journal Article · 01 February 2022 · Particuology

DOI: https://doi.org/10.1016/j.partic.2020.11.007 · OSTI ID:1829171

Gao, Xi; Yu, Jia; Portal, Ricardo J. F.; Dietiker, Jean-François; Shahnam, Mehrdad; Rogers, William A.

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 1829171

Journal Information:: Particuology, Journal Name: Particuology Journal Issue: C Vol. 61; ISSN 1674-2001

Publisher:: ElsevierCopyright Statement

Country of Publication:: China

Language:: English

References (47)

Development of soft-sphere contact models for thermal heat conduction in granular flows Morris, A. B.; Pannala, S.; Ma, Z. AIChE Journal, Vol. 62, Issue 12 https://doi.org/10.1002/aic.15331	journal	June 2016
Assessment of mesoscale solid stress in coarse-grid TFM simulation of Geldart A particles in all fluidization regimes Gao, Xi; Li, Tingwen; Rogers, William A. AIChE Journal, Vol. 64, Issue 10 https://doi.org/10.1002/aic.16341	journal	July 2018
Simulation of the granular flow of cylindrical particles in the rotating drum Yang, Shiliang; Sun, Yuhao; Chew, Jia Wei AIChE Journal, Vol. 64, Issue 11 https://doi.org/10.1002/aic.16342	journal	July 2018
Effect of particle orientation on the drag force in random arrays of prolate ellipsoids in low‐Reynolds‐number flows Li, Xinyang; Jiang, Ming; Huang, Zheqing AIChE Journal, Vol. 65, Issue 8 https://doi.org/10.1002/aic.16621	journal	May 2019
Comprehensive experimental investigation on biomass‐glass beads binary fluidization: A data set for CFD model validation Gao, Xi; Yu, Jia; Li, Cheng AIChE Journal, Vol. 66, Issue 2 https://doi.org/10.1002/aic.16843	journal	October 2019
Validation and Application of a Kinetic Model for Downdraft Biomass Gasification Simulation Smith, Joseph D.; Alembath, Anand; Al-Rubaye, Haider Chemical Engineering & Technology, Vol. 42, Issue 12 https://doi.org/10.1002/ceat.201900304	journal	August 2019
Granular element method for three-dimensional discrete element calculations: 3D GRANULAR ELEMENT METHOD Lim, Keng-Wit; Andrade, José E. International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 38, Issue 2 https://doi.org/10.1002/nag.2203	journal	June 2013
Large-scale rigid body simulations Iglberger, Klaus; Rüde, Ulrich Multibody System Dynamics, Vol. 25, Issue 1 https://doi.org/10.1007/s11044-010-9212-0	journal	June 2010
Discrete element modelling (DEM) input parameters: understanding their impact on model predictions using statistical analysis Yan, Z.; Wilkinson, S. K.; Stitt, E. H. Computational Particle Mechanics, Vol. 2, Issue 3 https://doi.org/10.1007/s40571-015-0056-5	journal	July 2015
Efficient implementation of superquadric particles in Discrete Element Method within an open-source framework Podlozhnyuk, Alexander; Pirker, Stefan; Kloss, Christoph Computational Particle Mechanics, Vol. 4, Issue 1 https://doi.org/10.1007/s40571-016-0131-6	journal	September 2016
The measurement of particle rebound characteristics Gorham, D. A.; Kharaz, A. H. Powder Technology, Vol. 112, Issue 3 https://doi.org/10.1016/S0032-5910(00)00293-X	journal	October 2000
DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge Cleary, Paul W.; Sawley, Mark L. Applied Mathematical Modelling, Vol. 26, Issue 2 https://doi.org/10.1016/S0307-904X(01)00050-6	journal	February 2002
Curvature formulas for implicit curves and surfaces Goldman, Ron Computer Aided Geometric Design, Vol. 22, Issue 7 https://doi.org/10.1016/j.cagd.2005.06.005	journal	October 2005
Long-time simulation of catalytic MTO reaction in a fluidized bed reactor with a coarse-grained discrete particle method — EMMS-DPM Liu, Xingchi; Xu, Ji; Ge, Wei Chemical Engineering Journal, Vol. 389 https://doi.org/10.1016/j.cej.2020.124135	journal	June 2020
Simulation of a continuous granular mixer: Effect of operating conditions on flow and mixing Sarkar, Avik; Wassgren, Carl R. Chemical Engineering Science, Vol. 64, Issue 11 https://doi.org/10.1016/j.ces.2009.02.011	journal	June 2009
Force model considerations for glued-sphere discrete element method simulations Kodam, Madhusudhan; Bharadwaj, Rahul; Curtis, Jennifer Chemical Engineering Science, Vol. 64, Issue 15 https://doi.org/10.1016/j.ces.2009.04.025	journal	August 2009
Cylindrical object contact detection for use in discrete element method simulations. Part I – Contact detection algorithms Kodam, Madhusudhan; Bharadwaj, Rahul; Curtis, Jennifer Chemical Engineering Science, Vol. 65, Issue 22 https://doi.org/10.1016/j.ces.2010.08.006	journal	November 2010
Cylindrical object contact detection for use in discrete element method simulations, Part II—Experimental validation Kodam, Madhusudhan; Bharadwaj, Rahul; Curtis, Jennifer Chemical Engineering Science, Vol. 65, Issue 22 https://doi.org/10.1016/j.ces.2010.08.007	journal	November 2010
Large-scale powder mixer simulations using massively parallel GPUarchitectures Radeke, Charles A.; Glasser, Benjamin J.; Khinast, Johannes G. Chemical Engineering Science, Vol. 65, Issue 24 https://doi.org/10.1016/j.ces.2010.09.035	journal	December 2010
DEM simulation of continuous tablet coating: Effects of tablet shape and fill level on inter-tablet coating variability Suzzi, Daniele; Toschkoff, Gregor; Radl, Stefan Chemical Engineering Science, Vol. 69, Issue 1 https://doi.org/10.1016/j.ces.2011.10.009	journal	February 2012
Critical assessment of two approaches for evaluating contacts between super-quadric shaped particles in DEM simulations Lu, G.; Third, J. R.; Müller, C. R. Chemical Engineering Science, Vol. 78 https://doi.org/10.1016/j.ces.2012.05.041	journal	August 2012
Experimental measurement of the coefficient of restitution of irregular shaped particles impacting on horizontal surfaces Hastie, D. B. Chemical Engineering Science, Vol. 101 https://doi.org/10.1016/j.ces.2013.07.010	journal	September 2013
A novel method based on orientation discretization for discrete element modeling of non-spherical particles Dong, Kejun; Wang, Chuncheng; Yu, Aibing Chemical Engineering Science, Vol. 126 https://doi.org/10.1016/j.ces.2014.12.059	journal	April 2015
Fine-particle defluidization: Interaction between cohesion, Young׳s modulus and static bed height Liu, Peiyuan; LaMarche, Casey Q.; Kellogg, Kevin M. Chemical Engineering Science, Vol. 145 https://doi.org/10.1016/j.ces.2016.02.024	journal	May 2016
The NETL MFiX Suite of multiphase flow models: A brief review and recent applications of MFiX-TFM to fossil energy Technologies Li, Tingwen; Rogers, William A.; Syamlal, Madhava Chemical Engineering Science, Vol. 169 https://doi.org/10.1016/j.ces.2016.07.043	journal	September 2017
Development and validation of an enhanced filtered drag model for simulating gas-solid fluidization of Geldart A particles in all flow regimes Gao, Xi; Li, Tingwen; Sarkar, Avik Chemical Engineering Science, Vol. 184 https://doi.org/10.1016/j.ces.2018.03.038	journal	July 2018
CFD-DEM simulation of heat transfer in fluidized beds: Model verification, validation, and application Wang, Shuai; Luo, Kun; Hu, Chenshu Chemical Engineering Science, Vol. 197 https://doi.org/10.1016/j.ces.2018.12.031	journal	April 2019
Granular element method for computational particle mechanics Andrade, José E.; Lim, Keng-Wit; Avila, Carlos F. Computer Methods in Applied Mechanics and Engineering, Vol. 241-244 https://doi.org/10.1016/j.cma.2012.06.012	journal	October 2012
A 2D DEM–LBM study on soil behaviour due to locally injected fluid Cui, Xilin; Li, Jun; Chan, Andrew Particuology, Vol. 10, Issue 2 https://doi.org/10.1016/j.partic.2011.10.002	journal	April 2012
Development of parallel DEM for the open source code MFIX Gopalakrishnan, Pradeep; Tafti, Danesh Powder Technology, Vol. 235 https://doi.org/10.1016/j.powtec.2012.09.006	journal	February 2013
Cartesian grid simulations of gas–solids flow systems with complex geometry Dietiker, Jean-François; Li, Tingwen; Garg, Rahul Powder Technology, Vol. 235 https://doi.org/10.1016/j.powtec.2012.11.028	journal	February 2013
Flow characteristics and discharge rate of ellipsoidal particles in a flat bottom hopper Liu, S. D.; Zhou, Z. Y.; Zou, R. P. Powder Technology, Vol. 253 https://doi.org/10.1016/j.powtec.2013.11.001	journal	February 2014
Challenges of DEM: I. Competing bottlenecks in parallelization of gas–solid flows Liu, Peiyuan; Hrenya, Christine M. Powder Technology, Vol. 264 https://doi.org/10.1016/j.powtec.2014.04.095	journal	September 2014
Experimental and numerical study of fluidization and pressure drop of spherical and non-spherical particles in a model scale fluidized bed Vollmari, K.; Jasevičius, R.; Kruggel-Emden, H. Powder Technology, Vol. 291 https://doi.org/10.1016/j.powtec.2015.11.045	journal	April 2016
DEM/CFD-DEM Modelling of Non-spherical Particulate Systems: Theoretical Developments and Applications Zhong, Wenqi; Yu, Aibing; Liu, Xuejiao Powder Technology, Vol. 302 https://doi.org/10.1016/j.powtec.2016.07.010	journal	November 2016
A GPU-based DEM approach for modelling of particulate systems Gan, J. Q.; Zhou, Z. Y.; Yu, A. B. Powder Technology, Vol. 301 https://doi.org/10.1016/j.powtec.2016.07.072	journal	November 2016
Grains3D, a flexible DEM approach for particles of arbitrary convex shape - Part II: Parallel implementation and scalable performance Rakotonirina, Andriarimina Daniel; Wachs, Anthony Powder Technology, Vol. 324 https://doi.org/10.1016/j.powtec.2017.10.033	journal	January 2018
DEM study of mechanical characteristics of multi-spherical and superquadric particles at micro and macro scales Soltanbeigi, Behzad; Podlozhnyuk, Alexander; Papanicolopulos, Stefanos-Aldo Powder Technology, Vol. 329 https://doi.org/10.1016/j.powtec.2018.01.082	journal	April 2018
Discrete element modelling of ellipsoidal particles using super-ellipsoids and multi-spheres: A comparative study You, Ying; Zhao, Yonzhi Powder Technology, Vol. 331 https://doi.org/10.1016/j.powtec.2018.03.017	journal	May 2018
Fundamental challenges in packing problems: from spherical to non-spherical particles Baule, Adrian; Makse, Hernán A. Soft Matter, Vol. 10, Issue 25 https://doi.org/10.1039/c3sm52783b	journal	January 2014
A linear complexity intersection algorithm for discrete element simulation of arbitrary geometries Williams, J. R.; O’Connor, R. Engineering Computations, Vol. 12, Issue 2 https://doi.org/10.1108/02644409510799550	journal	February 1995
Shape representation and contact detection for discrete element simulations of arbitrary geometries Hogue, Caroline Engineering Computations, Vol. 15, Issue 3 https://doi.org/10.1108/02644409810208525	journal	May 1998
Superquadrics and Modal Dynamics for Discrete Elements in Interactive Design Williams, John R.; Pentland, Alex P. Engineering Computations, Vol. 9, Issue 2 https://doi.org/10.1108/eb023852	journal	February 1992
Improving the Density of Jammed Disordered Packings Using Ellipsoids Donev, A. Science, Vol. 303, Issue 5660 https://doi.org/10.1126/science.1093010	journal	February 2004
Discrete simulation of granular and particle-fluid flows: from fundamental study to engineering application Ge, Wei; Wang, Limin; Xu, Ji Reviews in Chemical Engineering, Vol. 33, Issue 6 https://doi.org/10.1515/revce-2015-0079	journal	November 2017
A discrete numerical model for granular assemblies Cundall, P. A.; Strack, O. D. L. Géotechnique, Vol. 29, Issue 1 https://doi.org/10.1680/geot.1979.29.1.47	journal	March 1979
Contact Detection Between Convex Superquadric Surfaces Portal, Ricardo; Dias, João; de Sousa, Luís Archive of Mechanical Engineering, Vol. 57, Issue 2 https://doi.org/10.2478/v10180-010-0009-8	journal	January 2010

Similar Records

Development and validation of SuperDEM-CFD coupled model for simulating non-spherical particles hydrodynamics in fluidized beds

Journal Article · 2021 · Chemical Engineering Journal · OSTI ID:1797332

Gao, Xi; Yu, Jia; Lu, Liqiang; +2 more

Superquadric Particle Method for Non-Spherical DEM Simulation in Open Source MFiX: Development, Implementation, and Verification

Conference · 2019 · OSTI ID:1784004

Gao, Xi; Yu, Jia; Portal, Ricardo; +1 more

SuperDEM-CFD: Open source parallel solver for non-spherical particle-fluid fluidization systems

Conference · 2020 · OSTI ID:1766318

Gao, Xi; Yu, Jia; Lu, Liqiang; +2 more

Title: Development and validation of SuperDEM for non-spherical particulate systems using a superquadric particle method

Citation Formats

References (47)

Similar Records

Related Subjects