Mechanical response and microstructural evolution of Ni-27 W alloys during uniaxial tension

Liu, Zhichao; Nie, Zhihua; Ning, Xianjin; Zhao, Xiuchen; Yu, Xiaodong; Wang, Fuchi; Tan, Chengwen

doi:10.1016/j.jallcom.2021.161972

Title: Mechanical response and microstructural evolution of Ni-27 W alloys during uniaxial tension

Journal Article · 31 December 2021 · Journal of Alloys and Compounds

DOI: https://doi.org/10.1016/j.jallcom.2021.161972 · OSTI ID:1822482

Liu, Zhichao; Nie, Zhihua; Ning, Xianjin; Zhao, Xiuchen; Yu, Xiaodong; Wang, Fuchi; Tan, Chengwen

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1822482

Journal Information:: Journal of Alloys and Compounds, Journal Name: Journal of Alloys and Compounds Journal Issue: C Vol. 891; ISSN 0925-8388

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (52)

Measurement of Structural Parameters Important in Creep of Ni-Mo and Ni-W Solid Solutions Tiearney, T. C.; Grant, N. J. Metallurgical Transactions A, Vol. 13, Issue 10 https://doi.org/10.1007/BF02647839	journal	October 1982
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels Saeed-Akbari, A.; Imlau, J.; Prahl, U. Metallurgical and Materials Transactions A, Vol. 40, Issue 13 https://doi.org/10.1007/s11661-009-0050-8	journal	October 2009
The stacking fault density in solid solutions based on copper, silver, nickel, aluminium and lead Deléhouzée, L.; Deruyttere, A. Acta Metallurgica, Vol. 15, Issue 5 https://doi.org/10.1016/0001-6160(67)90353-7	journal	May 1967
Dislocation reactions during deformation twinning in Cu-11at.% Al single crystals Mori, Takeshi; Fujita, Hiroshi Acta Metallurgica, Vol. 28, Issue 6 https://doi.org/10.1016/0001-6160(80)90154-6	journal	June 1980
X-Ray study of short-range order in nickel alloys containing 10.7 and 20.0 at. % Molybdenum Spruiell, J. E.; Stansbury, E. E. Journal of Physics and Chemistry of Solids, Vol. 26, Issue 5 https://doi.org/10.1016/0022-3697(65)90256-8	journal	May 1965
SGTE data for pure elements Dinsdale, A. T. Calphad, Vol. 15, Issue 4 https://doi.org/10.1016/0364-5916(91)90030-N	journal	October 1991
Cohesion in alloys — fundamentals of a semi-empirical model Miedema, A. R.; de Châtel, P. F.; de Boer, F. R. Physica B+C, Vol. 100, Issue 1 https://doi.org/10.1016/0378-4363(80)90054-6	journal	April 1980
Mechanisms of slip mode modification in F.C.C. solid solutions Hong, Sun Ig; Laird, C. Acta Metallurgica et Materialia, Vol. 38, Issue 8 https://doi.org/10.1016/0956-7151(90)90126-2	journal	August 1990
Microstructure and Mechanical Properties of High Manganese TRIP Steel Zhao, Jin-long; Xi, Yan; Shi, Wen Journal of Iron and Steel Research International, Vol. 19, Issue 4 https://doi.org/10.1016/S1006-706X(12)60088-0	journal	April 2012
Predicting twinning stress in fcc metals: Linking twin-energy pathways to twin nucleation Kibey, S.; Liu, J. B.; Johnson, D. D. Acta Materialia, Vol. 55, Issue 20 https://doi.org/10.1016/j.actamat.2007.08.042	journal	December 2007
Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography Demir, Eralp; Raabe, Dierk; Zaafarani, Nader Acta Materialia, Vol. 57, Issue 2 https://doi.org/10.1016/j.actamat.2008.09.039	journal	January 2009
The effect of alloying elements on the dislocation climbing velocity in Ni: A first-principles study Yu, Xiao-Xiang; Wang, Chong-Yu Acta Materialia, Vol. 57, Issue 19 https://doi.org/10.1016/j.actamat.2009.08.019	journal	November 2009
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate Curtze, S.; Kuokkala, V. -T. Acta Materialia, Vol. 58, Issue 15 https://doi.org/10.1016/j.actamat.2010.05.049	journal	September 2010
Thermodynamic modeling of the stacking fault energy of austenitic steels Curtze, S.; Kuokkala, V. -T.; Oikari, A. Acta Materialia, Vol. 59, Issue 3 https://doi.org/10.1016/j.actamat.2010.10.037	journal	February 2011
In situ neutron diffraction study of the microstructure and tensile deformation behavior in Al-added high manganese austenitic steels Jeong, J. S.; Woo, W.; Oh, K. H. Acta Materialia, Vol. 60, Issue 5 https://doi.org/10.1016/j.actamat.2011.12.043	journal	March 2012
Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel Ungár, Tamás; Stoica, Alexandru D.; Tichy, Géza Acta Materialia, Vol. 66 https://doi.org/10.1016/j.actamat.2013.11.012	journal	March 2014
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory Pierce, D. T.; Jiménez, J. A.; Bentley, J. Acta Materialia, Vol. 68 https://doi.org/10.1016/j.actamat.2014.01.001	journal	April 2014
An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe–Mn–Si–Al twinning-induced plasticity steel Mahato, B.; Shee, S. K.; Sahu, T. Acta Materialia, Vol. 86 https://doi.org/10.1016/j.actamat.2014.12.015	journal	March 2015
The effect of aluminium on twinning in binary alpha-titanium Fitzner, Arnas; Prakash, D. G. Leo; da Fonseca, Joao Quinta Acta Materialia, Vol. 103 https://doi.org/10.1016/j.actamat.2015.09.048	journal	January 2016
Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel Welsch, E.; Ponge, D.; Hafez Haghighat, S. M. Acta Materialia, Vol. 116 https://doi.org/10.1016/j.actamat.2016.06.037	journal	September 2016
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy Laplanche, G.; Kostka, A.; Horst, O. M. Acta Materialia, Vol. 118 https://doi.org/10.1016/j.actamat.2016.07.038	journal	October 2016
Reversible deformation-induced martensitic transformation in Al0.6CoCrFeNi high-entropy alloy investigated by in situ synchrotron-based high-energy X-ray diffraction Ma, Lili; Wang, Lu; Nie, Zhihua Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.014	journal	April 2017
Slip versus twinning in low and very low stacking-fault energy Cu-Al alloy single crystals Szczerba, M. J.; Szczerba, M. S. Acta Materialia, Vol. 133 https://doi.org/10.1016/j.actamat.2017.05.011	journal	July 2017
Twinning-induced plasticity (TWIP) steels De Cooman, Bruno C.; Estrin, Yuri; Kim, Sung Kyu Acta Materialia, Vol. 142 https://doi.org/10.1016/j.actamat.2017.06.046	journal	January 2018
Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction Wang, Yiqiang; Liu, Bin; Yan, Kun Acta Materialia, Vol. 154 https://doi.org/10.1016/j.actamat.2018.05.013	journal	August 2018
Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction Tang, Lei; Wang, Li; Wang, Minshi Acta Materialia, Vol. 200 https://doi.org/10.1016/j.actamat.2020.09.075	journal	November 2020
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships Bouaziz, O.; Allain, S.; Scott, C. P. Current Opinion in Solid State and Materials Science, Vol. 15, Issue 4 https://doi.org/10.1016/j.cossms.2011.04.002	journal	August 2011
On the existence and the crystal structure of Ni4W, NiW and NiW2 compounds Cury, R.; Joubert, J. -M.; Tusseau-Nenez, S. Intermetallics, Vol. 17, Issue 3 https://doi.org/10.1016/j.intermet.2008.11.001	journal	March 2009
Studies of intergranular and intragranular stresses in cold-rolled CuNiSi alloys Hua, Yanhong; Nie, Zhihua; Wang, Liang Journal of Alloys and Compounds, Vol. 818 https://doi.org/10.1016/j.jallcom.2019.152896	journal	March 2020
Equivalent twinning criteria for FCC alloys under uniaxial tension at high temperatures Mohammed, Ahmed A. S.; El-Danaf, Ehab A.; Radwan, Abdel-Khalek A. Materials Science and Engineering: A, Vol. 457, Issue 1-2 https://doi.org/10.1016/j.msea.2006.12.113	journal	May 2007
The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels Hamada, A. S.; Karjalainen, L. P.; Somani, M. C. Materials Science and Engineering: A, Vol. 467, Issue 1-2 https://doi.org/10.1016/j.msea.2007.02.074	journal	October 2007
Modeling the deformation textures and microstructural evolutions of a Fe–Mn–C TWIP steel during tensile and shear testing Barbier, D.; Favier, V.; Bolle, B. Materials Science and Engineering: A, Vol. 540 https://doi.org/10.1016/j.msea.2012.01.128	journal	April 2012
Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels Ghasri-Khouzani, M.; McDermid, J. R. Materials Science and Engineering: A, Vol. 621 https://doi.org/10.1016/j.msea.2014.10.042	journal	January 2015
Effects of alloying on deformation twinning in high entropy alloys Li, Wei; Fan, Haidong; Tang, Jing Materials Science and Engineering: A, Vol. 763 https://doi.org/10.1016/j.msea.2019.138143	journal	August 2019
Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals Li, P.; Li, S. X.; Wang, Z. G. Progress in Materials Science, Vol. 56, Issue 3 https://doi.org/10.1016/j.pmatsci.2010.12.001	journal	March 2011
Shearing of γ″ precipitates and formation of planar slip bands in Inconel 718 during cyclic deformation Xiao, L.; Chen, D. L.; Chaturvedi, M. C. Scripta Materialia, Vol. 52, Issue 7 https://doi.org/10.1016/j.scriptamat.2004.11.023	journal	April 2005
Deformation mechanisms of twinning-induced plasticity steels: In situ synchrotron characterization and modeling Yan, Kun; Carr, David G.; Callaghan, Mark D. Scripta Materialia, Vol. 62, Issue 5 https://doi.org/10.1016/j.scriptamat.2009.11.008	journal	March 2010
Low stacking fault energy steels in the context of manganese-rich iron-based alloys Saeed-Akbari, A.; Schwedt, A.; Bleck, W. Scripta Materialia, Vol. 66, Issue 12 https://doi.org/10.1016/j.scriptamat.2011.12.041	journal	June 2012
Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature Park, Kyung-Tae Scripta Materialia, Vol. 68, Issue 6 https://doi.org/10.1016/j.scriptamat.2012.09.031	journal	March 2013
Fracture behavior of an austenitic stainless steel with nanoscale deformation twins Xiong, L.; You, Z. S.; Lu, L. Scripta Materialia, Vol. 127 https://doi.org/10.1016/j.scriptamat.2016.09.012	journal	January 2017
A novel medium heavy alloy (MHA) with excellent static/dynamic properties and impact toughness Li, Y.; Liu, G. Q.; Hu, X. B. Scripta Materialia, Vol. 162 https://doi.org/10.1016/j.scriptamat.2018.11.036	journal	March 2019
Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility Wu, Xiaolei; Yuan, Fuping; Yang, Muxin Scientific Reports, Vol. 5, Issue 1 https://doi.org/10.1038/srep11728	journal	June 2015
Recovery of strain-hardening rate in Ni-Si alloys Yang, C. L.; Zhang, Z. J.; Cai, T. Scientific Reports, Vol. 5, Issue 1 https://doi.org/10.1038/srep15532	journal	October 2015
Relationship between stacking‐fault energy and x‐ray measurements of stacking‐fault probability and microstrain Reed, R. P.; Schramm, R. E. Journal of Applied Physics, Vol. 45, Issue 11 https://doi.org/10.1063/1.1663122	journal	November 1974
Stacking Fault Energy in Silicon Aerts, E.; Delavignette, P.; Siems, R. Journal of Applied Physics, Vol. 33, Issue 10 https://doi.org/10.1063/1.1728570	journal	October 1962
Generalized stacking fault energies, ductilities, and twinnabilities of Ni and selected Ni alloys Siegel, Donald J. Applied Physics Letters, Vol. 87, Issue 12 https://doi.org/10.1063/1.2051793	journal	September 2005
On the energy of terminated stacking faults MÜLlner, Peter; Ferreira, Paulo J. Philosophical Magazine Letters, Vol. 73, Issue 6 https://doi.org/10.1080/095008396180551	journal	June 1996
Deformation twinning in silver-and copper-alloy crystals Naeita, N.; Takamura, J. Philosophical Magazine, Vol. 29, Issue 5 https://doi.org/10.1080/14786437408226586	journal	May 1974
MWP-fit : a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions Ribárik, G.; Ungár, T.; Gubicza, J. Journal of Applied Crystallography, Vol. 34, Issue 5 https://doi.org/10.1107/S0021889801011451	journal	September 2001
FIT2D : a multi-purpose data reduction, analysis and visualization program Hammersley, A. P. Journal of Applied Crystallography, Vol. 49, Issue 2 https://doi.org/10.1107/S1600576716000455	journal	March 2016
Strain Rate Sensitivity of a TRIP-Assisted Dual-Phase High-Entropy Alloy Basu, Silva; Li, Zhiming; Pradeep, K. G. Frontiers in Materials, Vol. 5 https://doi.org/10.3389/fmats.2018.00030	journal	May 2018
The Convolutional Multiple Whole Profile (CMWP) Fitting Method, a Global Optimization Procedure for Microstructure Determination Ribárik, Gábor; Jóni, Bertalan; Ungár, Tamás Crystals, Vol. 10, Issue 7 https://doi.org/10.3390/cryst10070623	journal	July 2020

Similar Records

Mechanical response and microstructural evolution of Ni-27 W alloys during uniaxial tension

Journal Article · 2021 · J. Alloy Comp. · OSTI ID:1847157

Liu, Zhichao; Nie, Zhihua; Ning, Xianjin; +4 more

Evolution of deformation and stress during necking in uniaxial tension

Journal Article · 2023 · Forces in Mechanics · OSTI ID:1987905

Liu, C.

In-situ TEM studies of 150 keV W+ ion irradiated W and W-alloys: Damage production and microstructural evolution

Journal Article · 2016 · Acta Materialia · OSTI ID:1351005

Yi, Xiaoou; Jenkins, Michael L.; Kirk, Marquis A.; +2 more

Title: Mechanical response and microstructural evolution of Ni-27 W alloys during uniaxial tension

Citation Formats

References (52)

Similar Records

Related Subjects