Modeling discontinuous dynamic recrystallization containing second phase particles in magnesium alloys utilizing phase field method

Zhu, NanYang; Sun, Chaoyang; Li, Yulan L.; Qian, Lingyun; Hu, Shenyang Y.; Cai, Yun; Feng, YingHao

doi:10.1016/j.commatsci.2021.110858

Title: Modeling discontinuous dynamic recrystallization containing second phase particles in magnesium alloys utilizing phase field method

Journal Article · 11 September 2021 · Computational Materials Science

DOI: https://doi.org/10.1016/j.commatsci.2021.110858 · OSTI ID:1820976

Zhu, NanYang ^[1]; Sun, Chaoyang ^[1]; Li, Yulan L. ^[2]; Qian, Lingyun ^[1];

^[2]; Cai, Yun ^[3]; Feng, YingHao ^[1]

Univ. of Science and Technology, Beijing (China)
Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Univ. of Science and Technology, Beijing (China); Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

Pre-existing second phase particles can induce particle stimulated nucleation (PSN) and pinning effect on grain boundaries during DRX process of magnesium alloys. The interaction among pinning effect, PSN mechanism and strain-induced grain boundary migration (SIBM) nucleation mechanism imposes challenge in quantitative study of microstructure evolution. A phase field model that describes discontinuous dynamic recrystallization process considering second phase particles (PF-DDRX-SP) which mainly distribute along grain boundaries is developed. The second phase order parameter with diffusion interface is introduced to the free energy function. With considering the pinning effect of second phase particles on grain boundaries, the grain boundary energy couples the interaction between second phase and grains. The effect of second phase on dislocation density evolution is considered in the model, and the PSN and SIBM mechanism are both executed by limiting the nucleation position to the grain boundary and the second phase interface. For the validation, the initial topology consistent with initial microstructure is applied to the simulation of DRX kinetics and flow behavior of AZ80 magnesium alloy, and great reliability and accuracy of developed model is indicated. Furthermore, through the model, the microstructure evolution with different particle size and with different volume fraction of round particle during DRX process were simulated. Finally, the results show that particles with higher dispersion reduce the number of DRX nuclei, which indicate that second phase particles suppress the nucleation at grain boundaries because of the pinning effect. More importantly, the proposed model could also quantitatively predict the relationships between the parameters of second phase particles and DRX behaviors, and enable to optimize the initial second phase structure in a uniform grain structure during thermomechanical process.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

Sponsoring Organization:: USDOE; National Natural Science Foundation of China (NSFC); Beijing Municipal Natural Science Foundation; Scientific and Technological Innovation Foundation of Shunde Graduate School

Grant/Contract Number:: AC05-76RL01830

OSTI ID:: 1820976

Report Number(s):: PNNL-SA--166391

Journal Information:: Computational Materials Science, Journal Name: Computational Materials Science Vol. 200; ISSN 0927-0256

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (58)

Study of the microstructures and mechanical properties of ZK61 magnesium alloy cylindrical parts with inner ribs formed by hot power spinning Yuan, Shuai; Xia, Qinxiang; Long, Jinchuan The International Journal of Advanced Manufacturing Technology, Vol. 111, Issue 3-4 https://doi.org/10.1007/s00170-020-06091-2	journal	October 2020
A Monte Carlo study of the influence of dynamic recovery on dynamic recrystallization Peczak, P.; Luton, M. J. Acta Metallurgica et Materialia, Vol. 41, Issue 1 https://doi.org/10.1016/0956-7151(93)90339-T	journal	January 1993
A Monte Carlo study of influence of deformation temperature on dynamic recrystallization Peczak, P. Acta Metallurgica et Materialia, Vol. 43, Issue 3 https://doi.org/10.1016/0956-7151(94)00280-U	journal	March 1995
Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization Ding, R.; Guo, Z. X. Acta Materialia, Vol. 49, Issue 16 https://doi.org/10.1016/S1359-6454(01)00233-6	journal	September 2001
Strengthening mechanisms of an Al-Mg-Sc-Zr alloy Kendig, K. L.; Miracle, D. B. Acta Materialia, Vol. 50, Issue 16 https://doi.org/10.1016/S1359-6454(02)00258-6	journal	September 2002
Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation Robson, J. D.; Henry, D. T.; Davis, B. Acta Materialia, Vol. 57, Issue 9 https://doi.org/10.1016/j.actamat.2009.02.032	journal	May 2009
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation Cram, D. G.; Zurob, H. S.; Brechet, Y. J. M. Acta Materialia, Vol. 57, Issue 17 https://doi.org/10.1016/j.actamat.2009.07.024	journal	October 2009
Effect of second-phase particle morphology on grain growth kinetics Chang, Kunok; Feng, Weiming; Chen, Long-Qing Acta Materialia, Vol. 57, Issue 17 https://doi.org/10.1016/j.actamat.2009.07.025	journal	October 2009
Phase field modeling of defects and deformation Wang, Yunzhi; Li, Ju Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.041	journal	February 2010
The effect of solute on discontinuous dynamic recrystallization Cram, D. G.; Fang, X. Y.; Zurob, H. S. Acta Materialia, Vol. 60, Issue 18 https://doi.org/10.1016/j.actamat.2012.08.021	journal	October 2012
Effect of Re on directional γ ′ -coarsening in commercial single crystal Ni-base superalloys: A phase field study Mushongera, L. T.; Fleck, M.; Kundin, J. Acta Materialia, Vol. 93 https://doi.org/10.1016/j.actamat.2015.03.048	journal	July 2015
Influence of microstructural parameters on the mechanical properties of oxide dispersion strengthened Fe-14Cr steels Dadé, M.; Malaplate, J.; Garnier, J. Acta Materialia, Vol. 127 https://doi.org/10.1016/j.actamat.2017.01.026	journal	April 2017
An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals Chen, L.; Chen, J.; Lebensohn, R. A. Computer Methods in Applied Mechanics and Engineering, Vol. 285 https://doi.org/10.1016/j.cma.2014.12.007	journal	March 2015
Phase-field study for the influence of solute interactions on solidification process in multicomponent alloys Zhang, Ruijie; Li, Mei; Allison, John Computational Materials Science, Vol. 47, Issue 3 https://doi.org/10.1016/j.commatsci.2009.11.011	journal	January 2010
A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress Beltran, O.; Huang, K.; Logé, R. E. Computational Materials Science, Vol. 102 https://doi.org/10.1016/j.commatsci.2015.02.043	journal	May 2015
Effect of strong nonuniformity in grain boundary energy on 3-D grain growth behavior: A phase-field simulation study Chang, Kunok; Chen, Long-Qing; Krill, Carl E. Computational Materials Science, Vol. 127 https://doi.org/10.1016/j.commatsci.2016.10.027	journal	February 2017
Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method Chen, Ming-Song; Yuan, Wu-Quan; Li, Hong-Bin Computational Materials Science, Vol. 136 https://doi.org/10.1016/j.commatsci.2017.05.009	journal	August 2017
Simulation of dynamic recrystallization in AZ80 magnesium alloy using cellular automaton Li, Xialei; Li, Xiaolong; Zhou, Haitao Computational Materials Science, Vol. 140 https://doi.org/10.1016/j.commatsci.2017.08.039	journal	December 2017
Modelling discontinuous dynamic recrystallization using a quantitative multi-order-parameter phase-field method Xiao, Namin; Hodgson, Peter; Rolfe, Bernard Computational Materials Science, Vol. 155 https://doi.org/10.1016/j.commatsci.2018.09.001	journal	December 2018
A quantitative phase-field model of gas bubble evolution in UO2 Xiao, Zhihua; Wang, Yafeng; Hu, Shenyang Computational Materials Science, Vol. 184 https://doi.org/10.1016/j.commatsci.2020.109867	journal	November 2020
Multi-phase-field modeling using a conservative Allen–Cahn equation for multiphase flow Aihara, Shintaro; Takaki, Tomohiro; Takada, Naoki Computers & Fluids, Vol. 178 https://doi.org/10.1016/j.compfluid.2018.08.023	journal	January 2019
Flow characterization of magnesium alloy ZK61 during hot deformation with improved constitutive equations and using activation energy maps Long, Jinchuan; Xia, Qinxiang; Xiao, Gangfeng International Journal of Mechanical Sciences, Vol. 191 https://doi.org/10.1016/j.ijmecsci.2020.106069	journal	February 2021
An integrated full-field model of concurrent plastic deformation and microstructure evolution: Application to 3D simulation of dynamic recrystallization in polycrystalline copper Zhao, Pengyang; Song En Low, Thaddeus; Wang, Yunzhi International Journal of Plasticity, Vol. 80 https://doi.org/10.1016/j.ijplas.2015.12.010	journal	May 2016
Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression Xie, C.; He, J. M.; Zhu, B. W. International Journal of Plasticity, Vol. 111 https://doi.org/10.1016/j.ijplas.2018.07.017	journal	December 2018
Integrated crystal plasticity and phase field model for prediction of recrystallization texture and anisotropic mechanical properties of cold-rolled ultra-low carbon steels Min, K. M.; Jeong, W.; Hong, S. H. International Journal of Plasticity, Vol. 127 https://doi.org/10.1016/j.ijplas.2019.102644	journal	April 2020
Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach Chen, S. F.; Li, D. Y.; Zhang, S. H. International Journal of Plasticity, Vol. 131 https://doi.org/10.1016/j.ijplas.2020.102710	journal	August 2020
Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys Cai, Y.; Sun, C. Y.; Li, Y. L. International Journal of Plasticity, Vol. 133 https://doi.org/10.1016/j.ijplas.2020.102773	journal	October 2020
Hot deformation behavior and processing map of a superlight dual-phase Mg–Li alloy Liu, Gang; Xie, Wen; Hadadzadeh, Amir Journal of Alloys and Compounds, Vol. 766 https://doi.org/10.1016/j.jallcom.2018.07.024	journal	October 2018
Effects of second phases on deformation behavior and dynamic recrystallization of as-cast Mg-4.3Li-4.1Zn-1.4Y alloy during hot compression Zhou, Yucheng; Chen, Zhaoyun; Ji, Jinghan Journal of Alloys and Compounds, Vol. 770 https://doi.org/10.1016/j.jallcom.2018.08.129	journal	January 2019
Investigation on the influences of δ phase on the dynamic recrystallization of Inconel 718 through a modified cellular automaton model Zhang, Fuxiang; Liu, Dong; Yang, Yanhui Journal of Alloys and Compounds, Vol. 830 https://doi.org/10.1016/j.jallcom.2020.154590	journal	July 2020
Effect of the primary O phase on thermal deformation behavior of a Ti2AlNb-based alloy Zhang, Hongyu; Zhang, Yaran; Liang, Hongyan Journal of Alloys and Compounds, Vol. 846 https://doi.org/10.1016/j.jallcom.2020.156458	journal	December 2020
Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg‒Al‒Zn alloys during gradient hot rolling Jin, Zhong-Zheng; Cheng, Xiu-Ming; Zha, Min Journal of Materials Science & Technology, Vol. 35, Issue 9 https://doi.org/10.1016/j.jmst.2019.05.017	journal	September 2019
Twinning effects on the hot deformation behavior of AZ31 Mg alloy Chen, Yuanli; Jin, Li; Dong, Jie Materials Characterization, Vol. 118 https://doi.org/10.1016/j.matchar.2016.06.014	journal	August 2016
Hot deformation behavior of AZ80 magnesium alloy towards optimization of its hot workability Su, Zexing; Wan, Li; Sun, Chaoyang Materials Characterization, Vol. 122 https://doi.org/10.1016/j.matchar.2016.10.026	journal	December 2016
Dynamic recrystallization kinetics and microstructure evolution of an AZ91D magnesium alloy during hot compression Xu, Yan; Chen, Chen; Zhang, Xuxing Materials Characterization, Vol. 145 https://doi.org/10.1016/j.matchar.2018.08.028	journal	November 2018
Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions Azarbarmas, M.; Aghaie-Khafri, M.; Cabrera, J. M. Materials & Design, Vol. 94 https://doi.org/10.1016/j.matdes.2015.12.157	journal	March 2016
Modeling of dynamic and post-dynamic recrystallization by coupling a full field approach to phenomenological laws Maire, Ludovic; Scholtes, Benjamin; Moussa, Charbel Materials & Design, Vol. 133 https://doi.org/10.1016/j.matdes.2017.08.015	journal	November 2017
Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method Jin, Zhaoyang; Cui, Zhenshan Materials Science and Engineering: A, Vol. 527, Issue 13-14 https://doi.org/10.1016/j.msea.2010.01.062	journal	May 2010
Texture and mechanical properties of ultrafine-grained Mg–3Al–1Zn alloy sheets prepared by high-ratio differential speed rolling Kim, W. J.; Lee, H. W.; Yoo, S. J. Materials Science and Engineering: A, Vol. 528, Issue 3 https://doi.org/10.1016/j.msea.2010.09.007	journal	January 2011
Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress–strain data Quan, Guo-Zheng; Shi, Yu; Wang, Yi-Xin Materials Science and Engineering: A, Vol. 528, Issue 28 https://doi.org/10.1016/j.msea.2011.07.064	journal	October 2011
Modification of texture and microstructure of magnesium alloy extrusions by particle-stimulated recrystallization Al-Samman, T. Materials Science and Engineering: A, Vol. 560 https://doi.org/10.1016/j.msea.2012.09.102	journal	January 2013
Achieving high strain rate superplasticity in Mg–Y–Nd–Zr alloy processed by homogenization treatment and equal channel angular pressing Kang, Zhixin; Zhou, Lianli; Zhang, Junyi Materials Science and Engineering: A, Vol. 633 https://doi.org/10.1016/j.msea.2015.03.011	journal	May 2015
Superplasticity of a nano-grained Mg–Gd–Y–Zr alloy processed by high-pressure torsion Alizadeh, R.; Mahmudi, R.; Ngan, A. H. W. Materials Science and Engineering: A, Vol. 651 https://doi.org/10.1016/j.msea.2015.10.094	journal	January 2016
Localized deformation via multiple twinning in a Mg–Gd–Y–Zr alloy processed by high-pressure torsion Tang, Lingling; Zhao, Yonghao; Liang, Ningning Materials Science and Engineering: A, Vol. 677 https://doi.org/10.1016/j.msea.2016.09.005	journal	November 2016
Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities Cai, Y.; Wan, L.; Guo, Z. H. Materials Science and Engineering: A, Vol. 687 https://doi.org/10.1016/j.msea.2017.01.057	journal	February 2017
Modeling of dynamic recrystallization of magnesium alloy using cellular automata considering initial topology of grains Wang, Lixiao; Fang, Gang; Qian, Lingyun Materials Science and Engineering: A, Vol. 711 https://doi.org/10.1016/j.msea.2017.11.024	journal	January 2018
Discontinuous dynamic recrystallization in α-Zr Kapoor, Rajeev; Reddy, G. Bharat; Sarkar, Apu Materials Science and Engineering: A, Vol. 718 https://doi.org/10.1016/j.msea.2018.01.117	journal	March 2018
Modeling dynamic recrystallization during hot deformation of a cast-homogenized Mg-Zn-Zr alloy Hadadzadeh, A.; Mokdad, F.; Wells, M. A. Materials Science and Engineering: A, Vol. 720 https://doi.org/10.1016/j.msea.2018.02.064	journal	March 2018
Dynamic precipitation and dynamic recrystallization during hot deformation of a solutionized WE43 magnesium alloy Fatemi, S. M.; Aliyari, Sh.; Miresmaeili, S. M. Materials Science and Engineering: A, Vol. 762 https://doi.org/10.1016/j.msea.2019.138076	journal	August 2019
Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation Qin, D. H.; Wang, M. J.; Sun, C. Y. Materials Science and Engineering: A, Vol. 788 https://doi.org/10.1016/j.msea.2020.139537	journal	June 2020
The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials Huang, Ke; Marthinsen, Knut; Zhao, Qinglong Progress in Materials Science, Vol. 92 https://doi.org/10.1016/j.pmatsci.2017.10.004	journal	March 2018
Grain size evolution during discontinuous dynamic recrystallization Galindo-Nava, E. I.; Rivera-Díaz-del-Castillo, P. E. J. Scripta Materialia, Vol. 72-73 https://doi.org/10.1016/j.scriptamat.2013.09.020	journal	February 2014
Ultra-large-scale phase-field simulation study of ideal grain growth Miyoshi, Eisuke; Takaki, Tomohiro; Ohno, Munekazu npj Computational Materials, Vol. 3, Issue 1 https://doi.org/10.1038/s41524-017-0029-8	journal	July 2017
Magnesium extrusion alloys: a review of developments and prospects Zeng, Zhuoran; Stanford, Nicole; Davies, Christopher Huw John International Materials Reviews, Vol. 64, Issue 1 https://doi.org/10.1080/09506608.2017.1421439	journal	January 2018
Computer simulation of the domain dynamics of a quenched system with a large number of nonconserved order parameters: The grain-growth kinetics Chen, Long-Qing; Yang, Wei Physical Review B, Vol. 50, Issue 21 https://doi.org/10.1103/PhysRevB.50.15752	journal	December 1994
Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys Wang, S. C.; Starink, M. J. International Materials Reviews, Vol. 50, Issue 4 https://doi.org/10.1179/174328005X14357	journal	August 2005
Corrosion of magnesium alloys: the role of alloying Gusieva, K.; Davies, C. H. J.; Scully, J. R. International Materials Reviews, Vol. 60, Issue 3 https://doi.org/10.1179/1743280414Y.0000000046	journal	October 2014
Multi-Phase-Field Model to Simulate Microstructure Evolutions during Dynamic Recrystallization Takaki, Tomohiro; Hirouchi, Tomoyuki; Hisakuni, Yousuke MATERIALS TRANSACTIONS, Vol. 49, Issue 11 https://doi.org/10.2320/matertrans.MB200805	journal	January 2008

Similar Records

Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys

Journal Article · 2020 · International Journal of Plasticity · OSTI ID:1755203

Cai, Yun; Sun, Chaoyang; Li, Yulan; +4 more

Microstructure evolution and dynamic recrystallization behavior of a powder metallurgy Ti-22Al-25Nb alloy during hot compression

Journal Article · 2017 · Materials Characterization · OSTI ID:22689692

Jia, Jianbo; Yang, Yue; Xu, Yan; +3 more

Electron Backscattered Diffraction Study of Microstructural Evolution During Isothermal Deformation of High-N Mn18Cr18 Alloy

Journal Article · 2019 · Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science · OSTI ID:22933531

Zhu, Delong; Zhang, Mei; Wang, Yang

Related Subjects

36 MATERIALS SCIENCE
discontinuous dynamic recrystallization
magnesium alloy
particle stimulated nucleation
phase field model
second phase particles

Title: Modeling discontinuous dynamic recrystallization containing second phase particles in magnesium alloys utilizing phase field method

Citation Formats

References (58)

Similar Records

Related Subjects