Towards high-temperature applications of aluminium alloys enabled by additive manufacturing

Michi, Richard A.; Plotkowski, Alex; Shyam, Amit; Dehoff, Ryan R.; Babu, Sudarsanam Suresh

doi:10.1080/09506608.2021.1951580

Title: Towards high-temperature applications of aluminium alloys enabled by additive manufacturing

Journal Article · 16 July 2021 · International Materials Reviews

DOI: https://doi.org/10.1080/09506608.2021.1951580 · OSTI ID:1808356

^[1];

^[2];

^[3]

Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA
Manufacturing Science Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA
Mechanical, Aerospace, and Biomedical Engineering, University of Tennessee, Knoxville, TN, USA

Not Available

View Journal Article

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 1808356

Journal Information:: International Materials Reviews, Journal Name: International Materials Reviews Journal Issue: 3 Vol. 67; ISSN 0950-6608

Publisher:: SAGE PublicationsCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (297)

Welding Metallurgy Kou, Sindo https://doi.org/10.1002/0471434027	book	October 2002
Solidification Microstructure-Processing Maps: Theory and Application Kurz, W. Advanced Engineering Materials, Vol. 3, Issue 7 https://doi.org/10.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W	journal	July 2001
Grain Refinement of Aluminium Alloys by Inoculation Greer, A. L.; Cooper, P. S.; Meredith, M. W. Advanced Engineering Materials, Vol. 5, Issue 12 https://doi.org/10.1002/adem.200390013	journal	February 2003
In Situ Formation of Particle Reinforced Al Matrix Composite by Selective Laser Melting of Al/Fe2O3 Powder Mixture Dadbakhsh, Sasan; Hao, Liang Advanced Engineering Materials, Vol. 14, Issue 1-2 https://doi.org/10.1002/adem.201100151	journal	October 2011
Fusion-Based Additive Manufacturing for Processing Aluminum Alloys: State-of-the-Art and Challenges: Fusion-Based Additive Manufacturing for Processing Aluminum Alloys Mertens, Anne I.; Delahaye, Jocelyn; Lecomte-Beckers, Jacqueline Advanced Engineering Materials, Vol. 19, Issue 8 https://doi.org/10.1002/adem.201700003	journal	April 2017
Selective Laser Melting of Gas Atomized Al–3.02Mg–0.2Sc–0.1Zr Alloy Powder: Microstructure and Mechanical Properties Li, Ruidi; Chen, Hui; Chen, Chao Advanced Engineering Materials, Vol. 21, Issue 3 https://doi.org/10.1002/adem.201800650	journal	December 2018
Laser powder bed fusion of high strength aluminum Mertens, Raya; Baert, Lise; Vanmeensel, Kim Material Design & Processing Communications, Vol. 3, Issue 5 https://doi.org/10.1002/mdp2.161	journal	March 2020
Tracer Diffusion of Magnesium in Aluminum Single Crystals Rothman, S. J.; Peterson, N. L.; Nowicki, L. J. physica status solidi (b), Vol. 63, Issue 1 https://doi.org/10.1002/pssb.2220630151	journal	May 1974
Phase transformations in Al-rich Al-W alloys rapidly quenched from the melt Tonejc, A. Journal of Materials Science, Vol. 7, Issue 11 https://doi.org/10.1007/BF00550695	journal	November 1972
Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite Thomas, M. P.; King, J. E. Journal of Materials Science, Vol. 29, Issue 20 https://doi.org/10.1007/BF01171535	journal	January 1994
Interdiffusion in a dilute solid solution of Al-Li alloy measured by electrical resistance Minamino, Y.; Yamane, T.; Araki, H. Metallurgical Transactions A, Vol. 18, Issue 8 https://doi.org/10.1007/BF02646667	journal	August 1987
Microstructural characterization of rapidly solidified Al-Ta alloys Singh, S.; Lele, S.; Suryanarayana, C. Metallurgical Transactions A, Vol. 18, Issue 11 https://doi.org/10.1007/BF02647021	journal	November 1987
Microstructure and creep properties of dispersion-strengthened aluminum alloys Rösler, J.; Joos, R.; Arzt, E. Metallurgical Transactions A, Vol. 23, Issue 5 https://doi.org/10.1007/BF02647335	journal	May 1992
Eutectic growth under rapid solidification conditions Kurz, W.; Trivedi, R. Metallurgical Transactions A, Vol. 22, Issue 12 https://doi.org/10.1007/BF02650266	journal	December 1991
Ductility and dynamic strain aging in rapidly solidified aluminum alloys Bouchaud, E.; Kubin, L.; Octor, H. Metallurgical Transactions A, Vol. 22, Issue 5 https://doi.org/10.1007/BF02661095	journal	May 1991
Diffusion of silicon in aluminum Fujikawa, Shin-ichiro; Hirano, Ken-ichi; Fukushima, Yoshiaki Metallurgical Transactions A, Vol. 9, Issue 12 https://doi.org/10.1007/BF02663412	journal	December 1978
Precipitation hardening Ardell, A. J. Metallurgical Transactions A, Vol. 16, Issue 12 https://doi.org/10.1007/BF02670416	journal	December 1985
Analysis of solidification microstructures in Fe-Ni-Cr single-crystal welds Rappaz, M.; David, S. A.; Vitek, J. M. Metallurgical Transactions A, Vol. 21, Issue 6 https://doi.org/10.1007/BF02672593	journal	June 1990
The Al-Cr (aluminum-chromium) system Murray, J. L. Journal of Phase Equilibria, Vol. 19, Issue 4 https://doi.org/10.1007/BF02735058	journal	August 1998
An analytical model for the interaction between an insoluble particle and an advancing solid/liquid interface Shangguan, D.; Ahuja, S.; Stefanescu, D. M. Metallurgical Transactions A, Vol. 23, Issue 2 https://doi.org/10.1007/BF02801184	journal	February 1992
Powder Metallurgy of Light Metal Alloys for Demanding Applications Froes, F. H.; Pickens, Joseph R. JOM, Vol. 36, Issue 1 https://doi.org/10.1007/BF03339911	journal	January 1984
Economics of additive manufacturing for end-usable metal parts Atzeni, Eleonora; Salmi, Alessandro The International Journal of Advanced Manufacturing Technology, Vol. 62, Issue 9-12 https://doi.org/10.1007/s00170-011-3878-1	journal	February 2012
Selective laser melting of Al-Fe-V-Si heat-resistant aluminum alloy powder: modeling and experiments Sun, Shaobo; Zheng, Lijing; Liu, Yingying The International Journal of Advanced Manufacturing Technology, Vol. 80, Issue 9-12 https://doi.org/10.1007/s00170-015-7137-8	journal	April 2015
Selective laser melting of aluminum-alumina powder composites obtained by hydrothermal oxidation method Nalivaiko, Anton Yu.; Ozherelkov, Dmitriy Yu.; Arnautov, Alexey N. Applied Physics A, Vol. 126, Issue 11 https://doi.org/10.1007/s00339-020-04029-9	journal	October 2020
Cerium in aluminum alloys Czerwinski, Frank Journal of Materials Science, Vol. 55, Issue 1 https://doi.org/10.1007/s10853-019-03892-z	journal	August 2019
Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property Zhou, Le; Huynh, Thinh; Park, Sharon Journal of Materials Science, Vol. 55, Issue 29 https://doi.org/10.1007/s10853-020-05037-z	journal	July 2020
Rapidly solidified high-temperature aluminum alloys. I. Structure Krainikov, A. V.; Neikov, O. D. Powder Metallurgy and Metal Ceramics, Vol. 51, Issue 7-8 https://doi.org/10.1007/s11106-012-9448-8	journal	November 2012
Rapidly Solidified High-Temperature Aluminum Alloys. II. Mechanical Properties Krainikov, A. V.; Neikov, O. D. Powder Metallurgy and Metal Ceramics, Vol. 51, Issue 9-10 https://doi.org/10.1007/s11106-013-9467-0	journal	January 2013
Effect of process parameters on the density and porosity of laser melted AlSi10Mg/SiC metal matrix composite Famodimu, Omotoyosi H.; Stanford, Mark; Oduoza, Chike F. Frontiers of Mechanical Engineering, Vol. 13, Issue 4 https://doi.org/10.1007/s11465-018-0521-y	journal	June 2018
Fusion and friction stir welding of aluminum-metal-matrix composites Storjohann, D.; Barabash, O. M.; David, S. A. Metallurgical and Materials Transactions A, Vol. 36, Issue 11 https://doi.org/10.1007/s11661-005-0093-4	journal	November 2005
Process-Dependent Composition, Microstructure, and Printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr Alloys Manufactured by Laser Powder Bed Fusion Zhou, Le; Hyer, Holden; Thapliyal, Saket Metallurgical and Materials Transactions A, Vol. 51, Issue 6 https://doi.org/10.1007/s11661-020-05768-3	journal	April 2020
Evaluation of the Effect of Rare Earth Alloying Additions on the Hot Tearing Susceptibility of Aluminum Alloy 7150 During Rapid Solidification Benoit, M. J.; Zhu, S. M.; Abbott, T. B. Metallurgical and Materials Transactions A, Vol. 51, Issue 10 https://doi.org/10.1007/s11661-020-05930-x	journal	July 2020
Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC p composite Chawla, N.; Jones, J. W.; Andres, C. Metallurgical and Materials Transactions A, Vol. 29, Issue 11 https://doi.org/10.1007/s11661-998-0325-5	journal	November 1998
Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literature Easton, Mark; StJohn, David Metallurgical and Materials Transactions A, Vol. 30, Issue 6 https://doi.org/10.1007/s11661-999-0098-5	journal	June 1999
A new hot-tearing criterion Rappaz, M.; Drezet, J. -M.; Gremaud, M. Metallurgical and Materials Transactions A, Vol. 30, Issue 2 https://doi.org/10.1007/s11661-999-0334-z	journal	February 1999
Modeling of inclusion growth and dissolution in the weld pool Hong, T.; Debroy, T.; Babu, S. S. Metallurgical and Materials Transactions B, Vol. 31, Issue 1 https://doi.org/10.1007/s11663-000-0141-9	journal	February 2000
Magnesium Loss in Nd:YAG Pulsed Laser Welding of Aluminum Alloys Beiranvand, Z. Malekshahi; Ghaini, F. Malek; Naffakh-moosavy, H. Metallurgical and Materials Transactions B, Vol. 49, Issue 5 https://doi.org/10.1007/s11663-018-1315-7	journal	June 2018
Metal Additive Manufacturing: A Review Frazier, William E. Journal of Materials Engineering and Performance, Vol. 23, Issue 6 https://doi.org/10.1007/s11665-014-0958-z	journal	April 2014
Short-Crack Growth Behavior in Additively Manufactured AlSi10Mg Alloy Rhein, Robert K.; Shi, Qianying; Tekalur, Srinivasan Arjun Journal of Materials Engineering and Performance, Vol. 30, Issue 7 https://doi.org/10.1007/s11665-021-05820-2	journal	May 2021
Metal-matrix composites for space applications Rawal, Suraj P. JOM, Vol. 53, Issue 4 https://doi.org/10.1007/s11837-001-0139-z	journal	April 2001
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing Jägle, Eric A.; Sheng, Zhendong; Wu, Liang JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-015-1764-2	journal	January 2016
Evaluation of Microstructure and Hardness of Novel Al-Fe-Ni Alloys with High Thermal Stability for Laser Additive Manufacturing Loginova, I. S.; Sazerat, M. V.; Loginov, P. A. JOM, Vol. 72, Issue 11 https://doi.org/10.1007/s11837-020-04321-2	journal	August 2020
Microstructure and Properties of Novel Heat Resistant Al–Ce–Cu Alloy for Additive Manufacturing Manca, D. R.; Churyumov, A. Yu.; Pozdniakov, A. V. Metals and Materials International, Vol. 25, Issue 3 https://doi.org/10.1007/s12540-018-00211-0	journal	November 2018
Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review Karthik, G. M.; Kim, Hyoung Seop Metals and Materials International, Vol. 27, Issue 1 https://doi.org/10.1007/s12540-020-00931-2	journal	January 2021
Microstructure, cracking behavior and control of Al–Fe–V–Si alloy produced by selective laser melting Sun, Shao-Bo; Zheng, Li-Jing; Liu, Jin-Hui Rare Metals https://doi.org/10.1007/s12598-016-0846-9	journal	January 2017
On the theory of impurity controlled grain boundary motion Lücke, K.; Stüwe, H. P. Acta Metallurgica, Vol. 19, Issue 10 https://doi.org/10.1016/0001-6160(71)90041-1	journal	October 1971
Theory of eutectic growth under rapid solidification conditions Trivedi, R.; Magnin, P.; Kurz, W. Acta Metallurgica, Vol. 35, Issue 4 https://doi.org/10.1016/0001-6160(87)90176-3	journal	April 1987
The kinetics of dislocation climb over hard particles—II. Effects of an attractive particle-dislocation interaction Arzt, E.; Rösler, J. Acta Metallurgica, Vol. 36, Issue 4 https://doi.org/10.1016/0001-6160(88)90159-9	journal	April 1988
Rapid solidification of Al-Cu eutectic alloy by laser remelting Zimmermann, M.; Carrard, M.; Kurz, W. Acta Metallurgica, Vol. 37, Issue 12 https://doi.org/10.1016/0001-6160(89)90203-4	journal	December 1989
The kinetics of precipitation from supersaturated solid solutions Lifshitz, I. M.; Slyozov, V. V. Journal of Physics and Chemistry of Solids, Vol. 19, Issue 1-2 https://doi.org/10.1016/0022-3697(61)90054-3	journal	April 1961
Rapid solidification of aluminum-rich AlV alloys Kim, Young-Won; Froes, F. H. Materials Science and Engineering, Vol. 98 https://doi.org/10.1016/0025-5416(88)90156-5	journal	February 1988
On the strength of discontinuous silicon carbide reinforced aluminum composites Nardone, V. C.; Prewo, K. M. Scripta Metallurgica, Vol. 20, Issue 1 https://doi.org/10.1016/0036-9748(86)90210-3	journal	January 1986
Dispersion strengthened AlFeVSi alloys Skinner, D. J.; Bye, R. L.; Raybould, D. Scripta Metallurgica, Vol. 20, Issue 6 https://doi.org/10.1016/0036-9748(86)90456-4	journal	June 1986
Materials with fine microstructures by advanced powder metallurgy Gutmanas, Elazar Y. Progress in Materials Science, Vol. 34, Issue 4 https://doi.org/10.1016/0079-6425(90)90003-R	journal	January 1990
Effect of strain rate on tensile ductility for a series of dispersion-strengthened aluminum-based alloys Skinner, D. J.; Zedalis, M. S.; Gilman, P. Materials Science and Engineering: A, Vol. 119 https://doi.org/10.1016/0921-5093(89)90526-1	journal	November 1989
Modelling of rapid solidification by melt spinning: effect of heat transfer in the cooling substrate Wang, G. -X.; Matthys, E. F. Materials Science and Engineering: A, Vol. 136 https://doi.org/10.1016/0921-5093(91)90444-R	journal	April 1991
Threshold creep behaviour of discontinuous aluminium and aluminium alloy matrix composites: An overview Čadek, J.; Oikawa, H.; Šustek, V. Materials Science and Engineering: A, Vol. 190, Issue 1-2 https://doi.org/10.1016/0921-5093(94)09605-V	journal	January 1995
The microstructure of rapidly solidified AlFe alloys subjected to laser surface treatment Gremaud, M.; Carrard, M.; Kurz, W. Acta Metallurgica et Materialia, Vol. 38, Issue 12 https://doi.org/10.1016/0956-7151(90)90271-H	journal	December 1990
Geometric factors affecting the internal stress distribution and high temperature creep rate of discontinuous fiber reinforced metals Dragone, T. L.; Nix, W. D. Acta Metallurgica et Materialia, Vol. 38, Issue 10 https://doi.org/10.1016/0956-7151(90)90306-2	journal	October 1990
Steady state and transient creep properties of an aluminum alloy reinforced with alumina fibers Dragone, T. L.; Nix, W. D. Acta Metallurgica et Materialia, Vol. 40, Issue 10 https://doi.org/10.1016/0956-7151(92)90348-I	journal	October 1992
Laser resolidification of the AlAl2Cu eutectic: The coupled zone Gill, S. C.; Zimmermann, M.; Kurz, W. Acta Metallurgica et Materialia, Vol. 40, Issue 11 https://doi.org/10.1016/0956-7151(92)90454-M	journal	November 1992
Ostwald ripening in concentrated alloys Calderon, H. A.; Voorhees, P. W.; Murray, J. L. Acta Metallurgica et Materialia, Vol. 42, Issue 3 https://doi.org/10.1016/0956-7151(94)90293-3	journal	March 1994
Laser and electron beam welding of SiCp reinforced aluminum A-356 metal matrix composite Lienert, T. J.; Brandon, E. D.; Lippold, J. C. Scripta Metallurgica et Materialia, Vol. 28, Issue 11 https://doi.org/10.1016/0956-716X(93)90479-C	journal	June 1993
Heat transfer and solidification in planar-flow melt-spinning: high wheelspeeds Carpenter, J. K.; Steen, P. H. International Journal of Heat and Mass Transfer, Vol. 40, Issue 9 https://doi.org/10.1016/S0017-9310(96)00305-5	journal	June 1997
Evaluation of the creep properties of an Al–17Si–1Mg–0.7Cu alloy Spigarelli, S.; Cabibbo, M.; Evangelista, E. Materials Letters, Vol. 56, Issue 6 https://doi.org/10.1016/S0167-577X(02)00677-8	journal	November 2002
P/M aluminum matrix composites: an overview Torralba, J. M.; da Costa, C. E.; Velasco, F. Journal of Materials Processing Technology, Vol. 133, Issue 1-2 https://doi.org/10.1016/S0924-0136(02)00234-0	journal	February 2003
A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting Wang, Pei; Eckert, Jürgen; Prashanth, Konda-gokuldoss Transactions of Nonferrous Metals Society of China, Vol. 30, Issue 8 https://doi.org/10.1016/S1003-6326(20)65357-2	journal	August 2020
Single-crystal laser deposition of superalloys: processing–microstructure maps Gäumann, M.; Bezençon, C.; Canalis, P. Acta Materialia, Vol. 49, Issue 6 https://doi.org/10.1016/S1359-6454(00)00367-0	journal	April 2001
A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles Easton, M. A.; StJohn, D. H. Acta Materialia, Vol. 49, Issue 10 https://doi.org/10.1016/S1359-6454(00)00368-2	journal	June 2001
Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys Seidman, David N.; Marquis, Emmanuelle A.; Dunand, David C. Acta Materialia, Vol. 50, Issue 16 https://doi.org/10.1016/S1359-6454(02)00201-X	journal	September 2002
Time-resolved X-ray diffraction investigation of primary weld solidification in Fe-C-Al-Mn steel welds Babu, S. S.; Elmer, J. W.; Vitek, J. M. Acta Materialia, Vol. 50, Issue 19 https://doi.org/10.1016/S1359-6454(02)00317-8	journal	November 2002
Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures Fuller, Christian B.; Seidman, David N.; Dunand, David C. Acta Materialia, Vol. 51, Issue 16 https://doi.org/10.1016/S1359-6454(03)00320-3	journal	September 2003
Creep of metals containing high volume fractions of unshearable dispersoids—Part I. Modeling the effect of dislocation pile-ups upon the detachment threshold stress Dunand, D. C.; Jansen, A. M. Acta Materialia, Vol. 45, Issue 11 https://doi.org/10.1016/S1359-6454(97)00135-3	journal	November 1997
Creep of metals containing high volume fractions of unshearable dispersoids—Part II. Experiments in the AlAl2O3 system and comparison to models Jansen, A. M.; Dunand, D. C. Acta Materialia, Vol. 45, Issue 11 https://doi.org/10.1016/S1359-6454(97)00136-5	journal	November 1997
Model for creep threshold stress in precipitation-strengthened alloys with coherent particles Marquis, Emmanuelle A.; Dunand, David C. Scripta Materialia, Vol. 47, Issue 8 https://doi.org/10.1016/S1359-6462(02)00165-3	journal	October 2002
Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects Wang, Q. G.; Apelian, D.; Lados, D. A. Journal of Light Metals, Vol. 1, Issue 1 https://doi.org/10.1016/S1471-5317(00)00008-0	journal	February 2001
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part II-coarsening of Al(ScZr) precipitates Fuller, C.; Seidman, D. Acta Materialia, Vol. 53, Issue 20 https://doi.org/10.1016/j.actamat.2005.08.015	journal	December 2005
Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I – Chemical compositions of Al(ScZr) precipitates Fuller, C.; Murray, J.; Seidman, D. Acta Materialia, Vol. 53, Issue 20 https://doi.org/10.1016/j.actamat.2005.08.016	journal	December 2005
Grain-boundary segregation and dynamic solute drag theory—A phase-field approach Grönhagen, Klara; Ågren, John Acta Materialia, Vol. 55, Issue 3 https://doi.org/10.1016/j.actamat.2006.09.017	journal	February 2007
Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids Karnesky, Richard A.; Meng, Liang; Dunand, David C. Acta Materialia, Vol. 55, Issue 4 https://doi.org/10.1016/j.actamat.2006.10.004	journal	February 2007
Threshold stress and load partitioning during creep of metal matrix composites Fernández, Ricardo; González-Doncel, Gaspar Acta Materialia, Vol. 56, Issue 11 https://doi.org/10.1016/j.actamat.2008.01.037	journal	June 2008
Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates Nie, J. F.; Muddle, B. C. Acta Materialia, Vol. 56, Issue 14 https://doi.org/10.1016/j.actamat.2008.03.028	journal	August 2008
An assessment of the entire Al–Fe system including D03 ordering Sundman, Bo; Ohnuma, Ikuo; Dupin, Nathalie Acta Materialia, Vol. 57, Issue 10 https://doi.org/10.1016/j.actamat.2009.02.046	journal	June 2009
Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging Knipling, Keith E.; Karnesky, Richard A.; Lee, Constance P. Acta Materialia, Vol. 58, Issue 15 https://doi.org/10.1016/j.actamat.2010.05.054	journal	September 2010
Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate Krug, Matthew E.; Dunand, David C. Acta Materialia, Vol. 59, Issue 13 https://doi.org/10.1016/j.actamat.2011.04.044	journal	August 2011
Coarsening resistance at 400°C of precipitation-strengthened Al–Zr–Sc–Er alloys Booth-Morrison, Christopher; Dunand, David C.; Seidman, David N. Acta Materialia, Vol. 59, Issue 18 https://doi.org/10.1016/j.actamat.2011.07.057	journal	October 2011
Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al–Zr–Sc–Si alloys Booth-Morrison, Christopher; Seidman, David N.; Dunand, David C. Acta Materialia, Vol. 60, Issue 8 https://doi.org/10.1016/j.actamat.2012.02.030	journal	May 2012
Ostwald ripening in multicomponent alloys Philippe, T.; Voorhees, P. W. Acta Materialia, Vol. 61, Issue 11 https://doi.org/10.1016/j.actamat.2013.03.049	journal	June 2013
Grain refining mechanism in the Al/Al–Ti–B system Fan, Z.; Wang, Y.; Zhang, Y. Acta Materialia, Vol. 84 https://doi.org/10.1016/j.actamat.2014.10.055	journal	February 2015
A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility Li, X. P.; Wang, X. J.; Saunders, M. Acta Materialia, Vol. 95 https://doi.org/10.1016/j.actamat.2015.05.017	journal	August 2015
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing Raghavan, Narendran; Dehoff, Ryan; Pannala, Sreekanth Acta Materialia, Vol. 112 https://doi.org/10.1016/j.actamat.2016.03.063	journal	June 2016
Origin of grain orientation during solidification of an aluminum alloy Wei, H. L.; Elmer, J. W.; DebRoy, T. Acta Materialia, Vol. 115 https://doi.org/10.1016/j.actamat.2016.05.057	journal	August 2016
Microstructure and strength of selectively laser melted AlSi10Mg Wu, J.; Wang, X. Q.; Wang, W. Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.07.012	journal	September 2016
Additive manufacturing of metals Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.07.019	journal	September 2016
Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys Erdeniz, Dinc; Nasim, Wahaz; Malik, Jahanzaib Acta Materialia, Vol. 124 https://doi.org/10.1016/j.actamat.2016.11.033	journal	February 2017
Evaluation of an Al-Ce alloy for laser additive manufacturing Plotkowski, A.; Rios, O.; Sridharan, N. Acta Materialia, Vol. 126 https://doi.org/10.1016/j.actamat.2016.12.065	journal	March 2017
Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility Li, X. P.; Ji, G.; Chen, Z. Acta Materialia, Vol. 129 https://doi.org/10.1016/j.actamat.2017.02.062	journal	May 2017
Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content De Luca, Anthony; Dunand, David C.; Seidman, David N. Acta Materialia, Vol. 144 https://doi.org/10.1016/j.actamat.2017.10.040	journal	February 2018
Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting Croteau, Joseph R.; Griffiths, Seth; Rossell, Marta D. Acta Materialia, Vol. 153 https://doi.org/10.1016/j.actamat.2018.04.053	journal	July 2018
Plasticity of laser-processed nanoscale Al Al2Cu eutectic alloy Wang, S. J.; Liu, G.; Xie, D. Y. Acta Materialia, Vol. 156 https://doi.org/10.1016/j.actamat.2018.06.038	journal	September 2018
Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates Suwanpreecha, C.; Toinin, J. Perrin; Michi, R. A. Acta Materialia, Vol. 164 https://doi.org/10.1016/j.actamat.2018.10.059	journal	February 2019
Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys De Luca, Anthony; Seidman, David N.; Dunand, David C. Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.11.031	journal	February 2019
A correlative four-dimensional study of phase-separation at the subnanoscale to nanoscale of a Ni Al alloy Plotnikov, Elizaveta Y.; Mao, Zugang; Baik, Sung-Il Acta Materialia, Vol. 171 https://doi.org/10.1016/j.actamat.2019.03.016	journal	June 2019
Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms Jia, Qingbo; Rometsch, Paul; Kürnsteiner, Philipp Acta Materialia, Vol. 171 https://doi.org/10.1016/j.actamat.2019.04.014	journal	June 2019
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting Delahaye, J.; Tchuindjang, J. Tchoufang; Lecomte-Beckers, J. Acta Materialia, Vol. 175 https://doi.org/10.1016/j.actamat.2019.06.013	journal	August 2019
Effects of Zn and Cr additions on precipitation and creep behavior of a dilute Al–Zr–Er–Si alloy Michi, Richard A.; Perrin Toinin, Jacques; Farkoosh, Amir R. Acta Materialia, Vol. 181 https://doi.org/10.1016/j.actamat.2019.09.055	journal	December 2019
Interface-mediated plasticity of nanoscale Al–Al2Cu eutectics Liu, Guisen; Wang, Shujuan; Misra, Amit Acta Materialia, Vol. 186 https://doi.org/10.1016/j.actamat.2020.01.024	journal	March 2020
Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting Griffiths, S.; Croteau, J. R.; Rossell, M. D. Acta Materialia, Vol. 188 https://doi.org/10.1016/j.actamat.2020.02.008	journal	April 2020
Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing Plotkowski, A.; Sisco, K.; Bahl, S. Acta Materialia, Vol. 196 https://doi.org/10.1016/j.actamat.2020.07.014	journal	September 2020
Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition Spierings, A. B.; Dawson, K.; Dumitraschkewitz, P. Additive Manufacturing, Vol. 20 https://doi.org/10.1016/j.addma.2017.12.011	journal	March 2018
Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing Uddin, Syed Z.; Murr, Lawrence E.; Terrazas, Cesar A. Additive Manufacturing, Vol. 22 https://doi.org/10.1016/j.addma.2018.05.047	journal	August 2018
Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties Zhang, Han; Gu, Dongdong; Yang, Jiankai Additive Manufacturing, Vol. 23 https://doi.org/10.1016/j.addma.2018.07.002	journal	October 2018
High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM) Uzan, Naor Elad; Shneck, Roni; Yeheskel, Ori Additive Manufacturing, Vol. 24 https://doi.org/10.1016/j.addma.2018.09.033	journal	December 2018
Role of hierarchical microstructure of additively manufactured AlSi10Mg on dynamic loading behavior Hadadzadeh, Amir; Shalchi Amirkhiz, Babak; Odeshi, Akindele Additive Manufacturing, Vol. 28 https://doi.org/10.1016/j.addma.2019.04.012	journal	August 2019
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life Shao, S.; Khonsari, M. M.; Guo, S. Additive Manufacturing, Vol. 29 https://doi.org/10.1016/j.addma.2019.100779	journal	October 2019
Laser additive manufacturing of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites: Processing optimization, microstructure evolution and mechanical properties Gu, Dongdong; Rao, Xiangwei; Dai, Donghua Additive Manufacturing, Vol. 29 https://doi.org/10.1016/j.addma.2019.100801	journal	October 2019
Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys Kürnsteiner, Philipp; Bajaj, Priyanshu; Gupta, Ankit Additive Manufacturing, Vol. 32 https://doi.org/10.1016/j.addma.2019.100910	journal	March 2020
Revisiting solidification microstructure selection maps in the frame of additive manufacturing Mohammadpour, P.; Plotkowski, A.; Phillion, A. B. Additive Manufacturing, Vol. 31 https://doi.org/10.1016/j.addma.2019.100936	journal	January 2020
A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles Tan, Qiyang; Zhang, Jingqi; Mo, Ning Additive Manufacturing, Vol. 32 https://doi.org/10.1016/j.addma.2019.101034	journal	March 2020
Investigation of porosity, microstructure and mechanical properties of additively manufactured graphene reinforced AlSi10Mg composite Tiwari, Jitendar Kumar; Mandal, Ajay; Sathish, N. Additive Manufacturing, Vol. 33 https://doi.org/10.1016/j.addma.2020.101095	journal	May 2020
Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys Takata, Naoki; Liu, Mulin; Kodaira, Hirohisa Additive Manufacturing, Vol. 33 https://doi.org/10.1016/j.addma.2020.101152	journal	May 2020
Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: Processing and microstructure Qi, Xing; Takata, Naoki; Suzuki, Asuka Additive Manufacturing, Vol. 35 https://doi.org/10.1016/j.addma.2020.101308	journal	October 2020
Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting Xinwei, Li; Shi, Shi; Shuang, Han Additive Manufacturing, Vol. 34 https://doi.org/10.1016/j.addma.2020.101326	journal	August 2020
Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2 Zhou, S. Y.; Su, Y.; Wang, H. Additive Manufacturing, Vol. 36 https://doi.org/10.1016/j.addma.2020.101458	journal	December 2020
Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy Martin, Aiden A.; Hammons, Joshua A.; Henderson, Hunter B. Applied Materials Today, Vol. 22 https://doi.org/10.1016/j.apmt.2021.100972	journal	March 2021
Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting Zhang, Han; Gu, Dongdong; Dai, Donghua Applied Surface Science, Vol. 509 https://doi.org/10.1016/j.apsusc.2020.145330	journal	April 2020
Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2 fabricated by selective laser melting and hot pressing Xi, L. X.; Zhang, H.; Wang, P. Ceramics International, Vol. 44, Issue 15 https://doi.org/10.1016/j.ceramint.2018.06.225	journal	October 2018
Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition Jiang, Bi; Zhenglong, Lei; Xi, Chen Ceramics International, Vol. 45, Issue 5 https://doi.org/10.1016/j.ceramint.2018.12.033	journal	April 2019
Al2O3 loss prediction model of selective laser melting Al2O3–Al composite Liao, Hailong; Zhu, Junjie; Chang, Shijie Ceramics International, Vol. 46, Issue 9 https://doi.org/10.1016/j.ceramint.2020.02.124	journal	June 2020
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting Spierings, Adriaan B.; Dawson, Karl; Voegtlin, Mark CIRP Annals, Vol. 65, Issue 1 https://doi.org/10.1016/j.cirp.2016.04.057	journal	January 2016
Selective laser melting of Al–8.5Fe–1.3V–1.7Si alloy: Investigation on the resultant microstructure and hardness Zheng, Lijing; Liu, Yingying; Sun, Shaobo Chinese Journal of Aeronautics, Vol. 28, Issue 2 https://doi.org/10.1016/j.cja.2015.01.013	journal	April 2015
First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys Uesugi, Tokuteru; Higashi, Kenji Computational Materials Science, Vol. 67 https://doi.org/10.1016/j.commatsci.2012.08.037	journal	February 2013
Modelling the creation and destruction of columnar and equiaxed zones during solidification and melting in multi-pass welding of steel Duggan, G.; Tong, M.; Browne, D. J. Computational Materials Science, Vol. 97 https://doi.org/10.1016/j.commatsci.2014.09.022	journal	February 2015
A sensitivity analysis of the columnar-to-equiaxed transition for Ni-based superalloys in electron beam additive manufacturing Haines, M.; Plotkowski, A.; Frederick, C. L. Computational Materials Science, Vol. 155 https://doi.org/10.1016/j.commatsci.2018.08.064	journal	December 2018
Interface kinetics of rapid solidification of binary alloys by atomistic simulations: Application to Ti-Ni alloys Kavousi, Sepideh; Novak, Brian R.; Hoyt, Jeffrey Computational Materials Science, Vol. 184 https://doi.org/10.1016/j.commatsci.2020.109854	journal	November 2020
Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting Han, Quanquan; Geng, Yanquan; Setchi, Rossitza Composites Part B: Engineering, Vol. 127 https://doi.org/10.1016/j.compositesb.2017.06.026	journal	October 2017
A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties Wang, P.; Gammer, C.; Brenne, F. Composites Part B: Engineering, Vol. 147 https://doi.org/10.1016/j.compositesb.2018.04.026	journal	August 2018
Fabrication and characterization of synergistic Al-SiC-GNPs hybrid composites Şenel, Mahmut Can; Gürbüz, Mevlüt; Koç, Erdem Composites Part B: Engineering, Vol. 154 https://doi.org/10.1016/j.compositesb.2018.07.035	journal	December 2018
In-situ synthesis of aluminum/nano-quasicrystalline Al-Fe-Cr composite by using selective laser melting Kang, N.; El Mansori, M.; Lin, X. Composites Part B: Engineering, Vol. 155 https://doi.org/10.1016/j.compositesb.2018.08.108	journal	December 2018
Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure Zan, Y. N.; Zhou, Y. T.; Zhao, H. Composites Part B: Engineering, Vol. 183 https://doi.org/10.1016/j.compositesb.2019.107674	journal	February 2020
On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting Gharbi, O.; Jiang, D.; Feenstra, D. R. Corrosion Science, Vol. 143 https://doi.org/10.1016/j.corsci.2018.08.019	journal	October 2018
Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting Gu, Dongdong; Zhang, Han; Dai, Donghua Corrosion Science, Vol. 170 https://doi.org/10.1016/j.corsci.2020.108657	journal	July 2020
Effect of grain size on corrosion of high purity aluminium Ralston, K. D.; Fabijanic, D.; Birbilis, N. Electrochimica Acta, Vol. 56, Issue 4 https://doi.org/10.1016/j.electacta.2010.09.023	journal	January 2011
Fatigue behavior of nanocrystalline metals and alloys Hanlon, T.; Tabachnikova, E.; Suresh, S. International Journal of Fatigue, Vol. 27, Issue 10-12 https://doi.org/10.1016/j.ijfatigue.2005.06.035	journal	October 2005
The physics of fatigue crack initiation Sangid, Michael D. International Journal of Fatigue, Vol. 57 https://doi.org/10.1016/j.ijfatigue.2012.10.009	journal	December 2013
Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy Siddique, Shafaqat; Imran, Muhammad; Walther, Frank International Journal of Fatigue, Vol. 94 https://doi.org/10.1016/j.ijfatigue.2016.06.003	journal	January 2017
A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes Beretta, S.; Romano, S. International Journal of Fatigue, Vol. 94 https://doi.org/10.1016/j.ijfatigue.2016.06.020	journal	January 2017
Additive manufacturing of fatigue resistant materials: Challenges and opportunities Yadollahi, Aref; Shamsaei, Nima International Journal of Fatigue, Vol. 98 https://doi.org/10.1016/j.ijfatigue.2017.01.001	journal	May 2017
Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing Domfang Ngnekou, Julius N.; Nadot, Yves; Henaff, Gilbert International Journal of Fatigue, Vol. 119 https://doi.org/10.1016/j.ijfatigue.2018.09.029	journal	February 2019
Influence of copper content on the high temperature tensile and low cycle fatigue behavior of cast Al-Cu-Mn-Zr alloys Bahl, Sumit; Hu, Xiaohua; Sisco, Kevin International Journal of Fatigue, Vol. 140 https://doi.org/10.1016/j.ijfatigue.2020.105836	journal	November 2020
A comparative investigation on the microstructure and mechanical properties of additively manufactured aluminum alloys Muhammad, Muztahid; Nezhadfar, P. D.; Thompson, Spencer International Journal of Fatigue, Vol. 146 https://doi.org/10.1016/j.ijfatigue.2021.106165	journal	May 2021
Effect of Al3(Sc, Zr) and Mg2Si precipitates on microstructure and tensile properties of selective laser melted Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy Bi, Jiang; Lei, Zhenglong; Chen, Yanbin Intermetallics, Vol. 123 https://doi.org/10.1016/j.intermet.2020.106822	journal	August 2020
Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion Wang, Wenyuan; Takata, Naoki; Suzuki, Asuka Intermetallics, Vol. 125 https://doi.org/10.1016/j.intermet.2020.106892	journal	October 2020
Hybrid reinforced aluminum matrix composites fabricated by selective laser melting Liao, Hailong; Zhang, Wenqi; Chen, Changpeng Intermetallics, Vol. 131 https://doi.org/10.1016/j.intermet.2020.107080	journal	April 2021
Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites Dadbakhsh, S.; Hao, L. Journal of Alloys and Compounds, Vol. 541 https://doi.org/10.1016/j.jallcom.2012.06.097	journal	November 2012
Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties Zhao, Xiao; Song, Bo; Fan, Wenrui Journal of Alloys and Compounds, Vol. 665 https://doi.org/10.1016/j.jallcom.2015.12.126	journal	April 2016
Formation of metastable cellular microstructures in selective laser melted alloys Prashanth, K. G.; Eckert, J. Journal of Alloys and Compounds, Vol. 707 https://doi.org/10.1016/j.jallcom.2016.12.209	journal	June 2017
3D printing graphene-aluminum nanocomposites Hu, Zengrong; Chen, Feng; Xu, Jiale Journal of Alloys and Compounds, Vol. 746 https://doi.org/10.1016/j.jallcom.2018.02.272	journal	May 2018
Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys Nie, Xiaojia; Zhang, Hu; Zhu, Haihong Journal of Alloys and Compounds, Vol. 764 https://doi.org/10.1016/j.jallcom.2018.06.032	journal	October 2018
Alumina loss mechanism of Al2O3-AlSi10 Mg composites during selective laser melting Liao, Hailong; Zhu, Haihong; Xue, Gang Journal of Alloys and Compounds, Vol. 785 https://doi.org/10.1016/j.jallcom.2019.01.116	journal	May 2019
Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting Xi, L.; Wang, P.; Prashanth, K. G. Journal of Alloys and Compounds, Vol. 786 https://doi.org/10.1016/j.jallcom.2019.01.327	journal	May 2019
AlSi10Mg alloy nanocomposites reinforced with aluminum-coated graphene: Selective laser melting, interfacial microstructure and property analysis Zhao, Zhanyong; Bai, Peikang; Misra, R. D. K. Journal of Alloys and Compounds, Vol. 792 https://doi.org/10.1016/j.jallcom.2019.04.007	journal	July 2019
Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting Xiao, Y. K.; Bian, Z. Y.; Wu, Y. Journal of Alloys and Compounds, Vol. 798 https://doi.org/10.1016/j.jallcom.2019.05.279	journal	August 2019
Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting Wang, Min; Song, Bo; Wei, Qingsong Journal of Alloys and Compounds, Vol. 810 https://doi.org/10.1016/j.jallcom.2019.151926	journal	November 2019
Microstructure development, tribological property and underlying mechanism of laser additive manufactured submicro-TiB2 reinforced Al-based composites Xi, Lixia; Guo, Shuang; Gu, Dongdong Journal of Alloys and Compounds, Vol. 819 https://doi.org/10.1016/j.jallcom.2019.152980	journal	April 2020
Manipulating the microstructure and tensile properties of selective laser melted Al–Mg-Sc-Zr alloy through heat treatment Ma, Rulong; Peng, Chaoqun; Cai, Zhiyong Journal of Alloys and Compounds, Vol. 831 https://doi.org/10.1016/j.jallcom.2020.154773	journal	August 2020
Primary solidification of ternary compounds in Al-rich Al–Ce–Mn alloys Yang, Y.; Bahl, S.; Sisco, K. Journal of Alloys and Compounds, Vol. 844 https://doi.org/10.1016/j.jallcom.2020.156048	journal	December 2020
Laser powder bed fusion of nano-CaB6 decorated 2024 aluminum alloy Mair, Philipp; Goettgens, Valerie Sue; Rainer, Tobias Journal of Alloys and Compounds, Vol. 863 https://doi.org/10.1016/j.jallcom.2021.158714	journal	May 2021
Lamellar instabilities during scanning laser melting of Al–Cu eutectic and hypoeutectic thin films Sullivan, E. J.; Tomko, J. A.; Skelton, J. M. Journal of Alloys and Compounds, Vol. 865 https://doi.org/10.1016/j.jallcom.2021.158800	journal	June 2021
Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment Ding, Xueping; Wang, Linzhi Journal of Manufacturing Processes, Vol. 26 https://doi.org/10.1016/j.jmapro.2017.02.009	journal	April 2017
The crack healing effect of scandium in aluminum alloys during laser additive manufacturing Qbau, N.; Nam, N. D.; Ca, N. X. Journal of Manufacturing Processes, Vol. 50 https://doi.org/10.1016/j.jmapro.2019.12.050	journal	February 2020
Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties Olakanmi, E. O. Journal of Materials Processing Technology, Vol. 213, Issue 8 https://doi.org/10.1016/j.jmatprotec.2013.03.009	journal	August 2013
Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting Siddique, Shafaqat; Imran, Muhammad; Wycisk, Eric Journal of Materials Processing Technology, Vol. 221 https://doi.org/10.1016/j.jmatprotec.2015.02.023	journal	July 2015
Changing the alloy composition of Al7075 for better processability by selective laser melting Montero-Sistiaga, Maria L.; Mertens, Raya; Vrancken, Bey Journal of Materials Processing Technology, Vol. 238 https://doi.org/10.1016/j.jmatprotec.2016.08.003	journal	December 2016
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties Gao, C.; Wang, Z.; Xiao, Z. Journal of Materials Processing Technology, Vol. 281 https://doi.org/10.1016/j.jmatprotec.2020.116618	journal	July 2020
Grain refinement in laser manufactured Al-based composites with TiB2 ceramic Xi, Lixia; Gu, Dongdong; Guo, Shuang Journal of Materials Research and Technology, Vol. 9, Issue 3 https://doi.org/10.1016/j.jmrt.2020.04.059	journal	May 2020
Thermally stable microstructure and mechanical properties of graphene reinforced aluminum matrix composites at elevated temperature Li, Min; Wang, Yufei; Gao, Haiyan Journal of Materials Research and Technology, Vol. 9, Issue 6 https://doi.org/10.1016/j.jmrt.2020.09.068	journal	November 2020
Progress in additive manufacturing on new materials: A review Li, Neng; Huang, Shuai; Zhang, Guodong Journal of Materials Science & Technology, Vol. 35, Issue 2 https://doi.org/10.1016/j.jmst.2018.09.002	journal	February 2019
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends Zhang, Jinliang; Song, Bo; Wei, Qingsong Journal of Materials Science & Technology, Vol. 35, Issue 2 https://doi.org/10.1016/j.jmst.2018.09.004	journal	February 2019
Microstructure evolution and mechanical properties at high temperature of selective laser melted AlSi10Mg Cao, Y.; Lin, X.; Wang, Q. Z. Journal of Materials Science & Technology, Vol. 62 https://doi.org/10.1016/j.jmst.2020.04.066	journal	January 2021
Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy Griffiths, S.; Rossell, M. D.; Croteau, J. Materials Characterization, Vol. 143 https://doi.org/10.1016/j.matchar.2018.03.033	journal	September 2018
Effect of microadditions of Mn and Mo on dual L12- and α-precipitation in a dilute Al-Zr-Sc-Er-Si alloy De Luca, Anthony; Shu, Shipeng; Seidman, David N. Materials Characterization, Vol. 169 https://doi.org/10.1016/j.matchar.2020.110585	journal	November 2020
Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder Li, Yali; Gu, Dongdong Materials & Design, Vol. 63 https://doi.org/10.1016/j.matdes.2014.07.006	journal	November 2014
Microstructure and tensile properties of in situ synthesized nano-sized TiCx/2009Al composites Wang, Lei; Qiu, Feng; Liu, Jingyuan Materials & Design, Vol. 79 https://doi.org/10.1016/j.matdes.2015.04.033	journal	August 2015
Computed tomography for characterization of fatigue performance of selective laser melted parts Siddique, Shafaqat; Imran, Muhammad; Rauer, Miriam Materials & Design, Vol. 83 https://doi.org/10.1016/j.matdes.2015.06.063	journal	October 2015
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting Spierings, A. B.; Dawson, K.; Heeling, T. Materials & Design, Vol. 115 https://doi.org/10.1016/j.matdes.2016.11.040	journal	February 2017
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting Li, Ruidi; Chen, Hui; Zhu, Hongbin Materials & Design, Vol. 168 https://doi.org/10.1016/j.matdes.2019.107668	journal	April 2019
Towards a high strength aluminium alloy development methodology for selective laser melting Jia, Qingbo; Rometsch, Paul; Cao, Sheng Materials & Design, Vol. 174 https://doi.org/10.1016/j.matdes.2019.107775	journal	July 2019
Novel Al-X alloys with improved hardness Hung, Cain J.; Nayak, Sanjeev K.; Sun, Yu Materials & Design, Vol. 192 https://doi.org/10.1016/j.matdes.2020.108699	journal	July 2020
Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting Bayoumy, D.; Schliephake, D.; Dietrich, S. Materials & Design, Vol. 198 https://doi.org/10.1016/j.matdes.2020.109317	journal	January 2021
Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing Mishra, Rajiv S.; Thapliyal, Saket Materials & Design, Vol. 204 https://doi.org/10.1016/j.matdes.2021.109640	journal	June 2021
Heat treatment of aluminium alloys produced by laser powder bed fusion: A review Fiocchi, J.; Tuissi, A.; Biffi, C. A. Materials & Design, Vol. 204 https://doi.org/10.1016/j.matdes.2021.109651	journal	June 2021
Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting Shi, Yunjia; Rometsch, Paul; Yang, Kun Materials Letters, Vol. 196 https://doi.org/10.1016/j.matlet.2017.03.089	journal	June 2017
Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity Gao, Chaofeng; Xiao, Zhiyu; Liu, Zhongqiang Materials Letters, Vol. 236 https://doi.org/10.1016/j.matlet.2018.10.126	journal	February 2019
Novel heat-resistant Al-Si-Ni-Fe alloy manufactured by selective laser melting Manca, Dario Rafael; Churyumov, A. Yu.; Pozdniakov, A. V. Materials Letters, Vol. 236 https://doi.org/10.1016/j.matlet.2018.11.033	journal	February 2019
Remarkable thermal stability of the Al-Ca-Ni-Mn alloy manufactured by laser-powder bed fusion Shurkin, P. K.; Letyagin, N. V.; Yakushkova, A. I. Materials Letters, Vol. 285 https://doi.org/10.1016/j.matlet.2020.129074	journal	February 2021
Hybrid particles dispersion strengthened aluminum metal matrix composite processed by stir casting Negi, Ankit Singh; Shanmugasundaram, T. Materials Today: Proceedings, Vol. 39 https://doi.org/10.1016/j.matpr.2020.03.717	journal	January 2021
Selective laser melting of nanostructured Al-Y-Ni-Co alloy Wang, Z.; Scudino, S.; Eckert, J. Manufacturing Letters, Vol. 25 https://doi.org/10.1016/j.mfglet.2020.06.005	journal	August 2020
Analysis of the creep response of an Al–17Si–4Cu–0.55Mg alloy Spigarelli, S.; Evangelista, E.; Cucchieri, S. Materials Science and Engineering: A, Vol. 387-389 https://doi.org/10.1016/j.msea.2004.06.043	journal	December 2004
Grain boundary mobilities during recrystallization of Al–Mn alloys as measured by in situ annealing experiments Lens, A.; Maurice, C.; Driver, J. H. Materials Science and Engineering: A, Vol. 403, Issue 1-2 https://doi.org/10.1016/j.msea.2005.05.010	journal	August 2005
General relationship between strength and hardness Zhang, P.; Li, S. X.; Zhang, Z. F. Materials Science and Engineering: A, Vol. 529 https://doi.org/10.1016/j.msea.2011.08.061	journal	November 2011
Creep properties and precipitate evolution in Al–Li alloys microalloyed with Sc and Yb Krug, Matthew E.; Seidman, David N.; Dunand, David C. Materials Science and Engineering: A, Vol. 550 https://doi.org/10.1016/j.msea.2012.04.075	journal	July 2012
Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment Prashanth, K. G.; Scudino, S.; Klauss, H. J. Materials Science and Engineering: A, Vol. 590 https://doi.org/10.1016/j.msea.2013.10.023	journal	January 2014
Mechanical properties and thermal stability of Al–Fe–Ni alloys prepared by centrifugal atomisation and hot extrusion Průša, F.; Vojtěch, D.; Michalcová, A. Materials Science and Engineering: A, Vol. 603 https://doi.org/10.1016/j.msea.2014.02.081	journal	May 2014
Dispersoid strengthening of a high temperature Al–Si–Cu–Mg alloy via Mo addition Farkoosh, A. R.; Grant Chen, X.; Pekguleryuz, M. Materials Science and Engineering: A, Vol. 620 https://doi.org/10.1016/j.msea.2014.10.004	journal	January 2015
Interaction between molybdenum and manganese to form effective dispersoids in an Al–Si–Cu–Mg alloy and their influence on creep resistance Farkoosh, A. R.; Grant Chen, X.; Pekguleryuz, M. Materials Science and Engineering: A, Vol. 627 https://doi.org/10.1016/j.msea.2014.12.115	journal	March 2015
Microstructure and mechanical properties of Al-Fe-V-Si aluminum alloy produced by electron beam melting Sun, Shaobo; Zheng, Lijing; Peng, Hui Materials Science and Engineering: A, Vol. 659 https://doi.org/10.1016/j.msea.2016.02.053	journal	April 2016
Selective laser melting of advanced Al-Al 2 O 3 nanocomposites: Simulation, microstructure and mechanical properties Han, Quanquan; Setchi, Rossitza; Lacan, Franck Materials Science and Engineering: A, Vol. 698 https://doi.org/10.1016/j.msea.2017.05.061	journal	June 2017
SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment Spierings, A. B.; Dawson, K.; Kern, K. Materials Science and Engineering: A, Vol. 701 https://doi.org/10.1016/j.msea.2017.06.089	journal	July 2017
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM) Uzan, Naor Elad; Shneck, Roni; Yeheskel, Ori Materials Science and Engineering: A, Vol. 704 https://doi.org/10.1016/j.msea.2017.08.027	journal	September 2017
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments Takata, Naoki; Kodaira, Hirohisa; Sekizawa, Keito Materials Science and Engineering: A, Vol. 704 https://doi.org/10.1016/j.msea.2017.08.029	journal	September 2017
Structural refinement and nanomechanical response of laser remelted Al-Al2Cu lamellar eutectic Lei, Qian; Ramakrishnan, Bhupendera Prashanth; Wang, Shujuan Materials Science and Engineering: A, Vol. 706 https://doi.org/10.1016/j.msea.2017.08.105	journal	October 2017
New generation of eutectic Al-Ni casting alloys for elevated temperature services Suwanpreecha, C.; Pandee, P.; Patakham, U. Materials Science and Engineering: A, Vol. 709 https://doi.org/10.1016/j.msea.2017.10.034	journal	January 2018
Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al–Mg–Sc–Zr alloy fabricated by selective laser melting Shi, Yunjia; Yang, Kun; Kairy, Shravan K. Materials Science and Engineering: A, Vol. 732 https://doi.org/10.1016/j.msea.2018.06.049	journal	August 2018
Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting Jiang, L. Y.; Liu, T. T.; Zhang, C. D. Materials Science and Engineering: A, Vol. 734 https://doi.org/10.1016/j.msea.2018.07.092	journal	September 2018
Enhanced Coarsening Resistance of Q-phase in Aluminum alloys by the addition of Slow Diffusing Solutes Kim, Kyoungdoc; Bobel, Andrew; Baik, Sung-Il Materials Science and Engineering: A, Vol. 735 https://doi.org/10.1016/j.msea.2018.08.059	journal	September 2018
Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy Xiong, Z. H.; Liu, S. L.; Li, S. F. Materials Science and Engineering: A, Vol. 740-741 https://doi.org/10.1016/j.msea.2018.10.083	journal	January 2019
Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy Michi, Richard A.; Toinin, Jacques Perrin; Seidman, David N. Materials Science and Engineering: A, Vol. 759 https://doi.org/10.1016/j.msea.2019.05.018	journal	June 2019
Influence of processing parameters on selective laser melted SiCp/AlSi10Mg composites: Densification, microstructure and mechanical properties Xue, Gang; Ke, Linda; Zhu, Haihong Materials Science and Engineering: A, Vol. 764 https://doi.org/10.1016/j.msea.2019.138155	journal	September 2019
Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation Shyam, A.; Roy, S.; Shin, D. Materials Science and Engineering: A, Vol. 765 https://doi.org/10.1016/j.msea.2019.138279	journal	September 2019
Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting Aboulkhair, Nesma T.; Simonelli, Marco; Salama, Ehab Materials Science and Engineering: A, Vol. 765 https://doi.org/10.1016/j.msea.2019.138307	journal	September 2019
Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance Liu, Yang; Michi, Richard A.; Dunand, David C. Materials Science and Engineering: A, Vol. 767 https://doi.org/10.1016/j.msea.2019.138440	journal	November 2019
Microstructure and mechanical properties of a novel Sc and Zr modified 7075 aluminum alloy prepared by selective laser melting Bi, Jiang; Lei, Zhenglong; Chen, Yanbin Materials Science and Engineering: A, Vol. 768 https://doi.org/10.1016/j.msea.2019.138478	journal	December 2019
Densification, microstructure and mechanical properties of an Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy printed by selective laser melting Bi, Jiang; Lei, Zhenglong; Chen, Yanbin Materials Science and Engineering: A, Vol. 774 https://doi.org/10.1016/j.msea.2020.138931	journal	February 2020
Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability Otani, Yuki; Sasaki, Shinya Materials Science and Engineering: A, Vol. 777 https://doi.org/10.1016/j.msea.2020.139079	journal	March 2020
Influence of scanning strategy and parameter on microstructural feature, residual stress and performance of Sc and Zr modified Al–Mg alloy produced by selective laser melting Zhang, Han; Gu, Dongdong; Dai, Donghua Materials Science and Engineering: A, Vol. 788 https://doi.org/10.1016/j.msea.2020.139593	journal	June 2020
Defect-based probabilistic fatigue life estimation model for an additively manufactured aluminum alloy Haridas, Ravi Sankar; Thapliyal, Saket; Agrawal, Priyanka Materials Science and Engineering: A, Vol. 798 https://doi.org/10.1016/j.msea.2020.140082	journal	November 2020
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy Ben, D. D.; Ma, Y. R.; Yang, H. J. Materials Science and Engineering: A, Vol. 798 https://doi.org/10.1016/j.msea.2020.140109	journal	November 2020
Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting Tan, Qiyang; Yin, Yu; Fan, Zhiqi Materials Science and Engineering: A, Vol. 800 https://doi.org/10.1016/j.msea.2020.140365	journal	January 2021
Mechanisms of creep deformation in a rapidly solidified Al–Fe–V–Si alloy Zhang, M.; Lewis, R. J.; Gibeling, J. C. Materials Science and Engineering: A, Vol. 805 https://doi.org/10.1016/j.msea.2021.140796	journal	February 2021
Elevated temperature mechanical properties of TiCN reinforced AlSi10Mg fabricated by laser powder bed fusion additive manufacturing He, Peidong; Kong, Hui; Liu, Qian Materials Science and Engineering: A, Vol. 811 https://doi.org/10.1016/j.msea.2021.141025	journal	April 2021
Mechanisms for stabilizing θ′(Al2Cu) precipitates at elevated temperatures investigated with phase field modeling Shower, Patrick; Morris, James; Shin, Dongwon Materialia, Vol. 6 https://doi.org/10.1016/j.mtla.2019.100335	journal	June 2019
An integrated computational materials engineering-anchored closed-loop method for design of aluminum alloys for additive manufacturing Thapliyal, Saket; Komarasamy, Mageshwari; Shukla, Shivakant Materialia, Vol. 9 https://doi.org/10.1016/j.mtla.2019.100574	journal	March 2020
An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties Shyam, A.; Plotkowski, A.; Bahl, S. Materialia, Vol. 12 https://doi.org/10.1016/j.mtla.2020.100758	journal	August 2020
Interface-dominated mechanical behavior in advanced metal matrix composites Guo, Qiang; Han, Yifan; Zhang, Di Nano Materials Science, Vol. 2, Issue 1 https://doi.org/10.1016/j.nanoms.2020.03.007	journal	March 2020
Laser absorption behavior of randomly packed powder-bed during selective laser melting of SiC and TiB2 reinforced Al matrix composites Gu, Dongdong; Yang, Ying; Xi, Lixia Optics & Laser Technology, Vol. 119 https://doi.org/10.1016/j.optlastec.2019.105600	journal	November 2019
Laser metal deposition for additive manufacturing of AA5024 and nanoparticulate TiC modified AA5024 alloy composites prepared with balling milling process Zhao, Tong; Dahmen, Marius; Cai, Wangcan Optics & Laser Technology, Vol. 131 https://doi.org/10.1016/j.optlastec.2020.106438	journal	November 2020
Process and Mechanical Properties: Applicability of a Scandium modified Al-alloy for Laser Additive Manufacturing Schmidtke, K.; Palm, F.; Hawkins, A. Physics Procedia, Vol. 12 https://doi.org/10.1016/j.phpro.2011.03.047	journal	January 2011
A Novel Processing Approach for Additive Manufacturing of Commercial Aluminum Alloys Roberts, Christopher E.; Bourell, David; Watt, Trevor Physics Procedia, Vol. 83 https://doi.org/10.1016/j.phpro.2016.08.095	journal	January 2016
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties Olakanmi, E. O.; Cochrane, R. F.; Dalgarno, K. W. Progress in Materials Science, Vol. 74 https://doi.org/10.1016/j.pmatsci.2015.03.002	journal	October 2015
Additive manufacturing of metallic components – Process, structure and properties DebRoy, T.; Wei, H. L.; Zuback, J. S. Progress in Materials Science, Vol. 92 https://doi.org/10.1016/j.pmatsci.2017.10.001	journal	March 2018
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review Yu, W. H.; Sing, S. L.; Chua, C. K. Progress in Materials Science, Vol. 104 https://doi.org/10.1016/j.pmatsci.2019.04.006	journal	July 2019
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting Aboulkhair, Nesma T.; Simonelli, Marco; Parry, Luke Progress in Materials Science, Vol. 106 https://doi.org/10.1016/j.pmatsci.2019.100578	journal	December 2019
Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture Dadbakhsh, S.; Hao, L.; Jerrard, P. G. E. Powder Technology, Vol. 231 https://doi.org/10.1016/j.powtec.2012.07.061	journal	November 2012
Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting Jue, Jiubin; Gu, Dongdong; Chang, Kun Powder Technology, Vol. 310 https://doi.org/10.1016/j.powtec.2016.12.079	journal	April 2017
Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties Li, Ruidi; Wang, Minbo; Yuan, Tiechui Powder Technology, Vol. 319 https://doi.org/10.1016/j.powtec.2017.06.050	journal	September 2017
Additive manufacturing in the process industry: A process-based cost model to study life cycle cost and the viability of additive manufacturing spare parts. Cardeal, Gonçalo; Sequeira, Diogo; Mendonça, Joana Procedia CIRP, Vol. 98 https://doi.org/10.1016/j.procir.2021.01.032	journal	January 2021
Back pressure equal channel angular consolidation of pure Al particles Xia, K.; Wu, X. Scripta Materialia, Vol. 53, Issue 11 https://doi.org/10.1016/j.scriptamat.2005.08.012	journal	December 2005
Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys at 300–400°C Knipling, K.; Dunand, D. Scripta Materialia, Vol. 59, Issue 4 https://doi.org/10.1016/j.scriptamat.2008.02.059	journal	August 2008
Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy Zhang, Hu; Zhu, Haihong; Nie, Xiaojia Scripta Materialia, Vol. 134 https://doi.org/10.1016/j.scriptamat.2017.02.036	journal	June 2017
Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion Zhou, Le; Pan, Hao; Hyer, Holden Scripta Materialia, Vol. 158 https://doi.org/10.1016/j.scriptamat.2018.08.025	journal	January 2019
Imparting high-temperature grain stability to an Al-Mg alloy Pariyar, Abhishek; Toth, Laszlo S.; Kailas, Satish V. Scripta Materialia, Vol. 190 https://doi.org/10.1016/j.scriptamat.2020.08.035	journal	January 2021
Selective laser melting of in-situ Al4SiC4 + SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size Chang, Fei; Gu, Dongdong; Dai, Donghua Surface and Coatings Technology, Vol. 272 https://doi.org/10.1016/j.surfcoat.2015.04.029	journal	June 2015
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite Dai, Donghua; Gu, Dongdong; Xia, Mujian Surface and Coatings Technology, Vol. 349 https://doi.org/10.1016/j.surfcoat.2018.05.072	journal	September 2018
Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites Zhao, Xuan; Gu, Dongdong; Ma, Chenglong Vacuum, Vol. 160 https://doi.org/10.1016/j.vacuum.2018.11.022	journal	February 2019
Fatigue of Materials Suresh, S. Cambridge University Press https://doi.org/10.1017/CBO9780511806575	book	January 2012
3D printing of high-strength aluminium alloys Martin, John H.; Yahata, Brennan D.; Hundley, Jacob M. Nature, Vol. 549, Issue 7672 https://doi.org/10.1038/nature23894	journal	September 2017
Aluminum with dispersed nanoparticles by laser additive manufacturing Lin, Ting-Chiang; Cao, Chezheng; Sokoluk, Maximilian Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-12047-2	journal	September 2019
Corrosion of metallic materials fabricated by selective laser melting Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing npj Materials Degradation, Vol. 3, Issue 1 https://doi.org/10.1038/s41529-019-0086-1	journal	June 2019
Microstructure and corrosion evolution of additively manufactured aluminium alloy AA7075 as a function of ageing Gharbi, Oumaïma; Kumar Kairy, Shravan; De Lima, Paula Roberta npj Materials Degradation, Vol. 3, Issue 1 https://doi.org/10.1038/s41529-019-0101-6	journal	November 2019
Scientific, technological and economic issues in metal printing and their solutions DebRoy, T.; Mukherjee, T.; Milewski, J. O. Nature Materials, Vol. 18, Issue 10 https://doi.org/10.1038/s41563-019-0408-2	journal	July 2019
High performance aluminum–cerium alloys for high-temperature applications Sims, Zachary C.; Rios, Orlando R.; Weiss, David Materials Horizons, Vol. 4, Issue 6 https://doi.org/10.1039/C7MH00391A	journal	January 2017
Diffusion of Al ²⁶ and Mn ⁵⁴ in Aluminum Lundy, T. S.; Murdock, J. F. Journal of Applied Physics, Vol. 33, Issue 5 https://doi.org/10.1063/1.1728808	journal	May 1962
Model for solute redistribution during rapid solidification Aziz, M. J. Journal of Applied Physics, Vol. 53, Issue 2 https://doi.org/10.1063/1.329867	journal	February 1982
Thermal evolution behavior and fluid dynamics during laser additive manufacturing of Al-based nanocomposites: Underlying role of reinforcement weight fraction Gu, Dongdong; Yuan, Pengpeng Journal of Applied Physics, Vol. 118, Issue 23 https://doi.org/10.1063/1.4937905	journal	December 2015
The metallurgy and processing science of metal additive manufacturing Sames, W. J.; List, F. A.; Pannala, S. International Materials Reviews, Vol. 61, Issue 5 https://doi.org/10.1080/09506608.2015.1116649	journal	March 2016
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals Cordero, Z. C.; Knight, B. E.; Schuh, C. A. International Materials Reviews, Vol. 61, Issue 8 https://doi.org/10.1080/09506608.2016.1191808	journal	June 2016
Strengthening Mechanisms in Crystal Plasticity Argon, Ali https://doi.org/10.1093/acprof:oso/9780198516002.001.0001	book	August 2007
Impurity Diffusion in Aluminum Peterson, N. L.; Rothman, S. J. Physical Review B, Vol. 1, Issue 8 https://doi.org/10.1103/PhysRevB.1.3264	journal	April 1970
Equilibrium solute segregation to matrix- θ ′ precipitate interfaces in Al-Cu alloys from first principles Samolyuk, G. D.; Eisenbach, M.; Shin, D. Physical Review Materials, Vol. 4, Issue 7 https://doi.org/10.1103/PhysRevMaterials.4.073801	journal	July 2020
Physical processes in fusion welding DebRoy, T.; David, S. A. Reviews of Modern Physics, Vol. 67, Issue 1 https://doi.org/10.1103/RevModPhys.67.85	journal	January 1995
Selective Laser Melting Additive Manufacturing of Novel Aluminum Based Composites With Multiple Reinforcing Phases Gu, Dongdong; Chang, Fei; Dai, Donghua Journal of Manufacturing Science and Engineering, Vol. 137, Issue 2 https://doi.org/10.1115/1.4028925	journal	April 2015
Closing the science gap in 3D metal printing Polonsky, Andrew T.; Pollock, Tresa M. Science, Vol. 368, Issue 6491 https://doi.org/10.1126/science.abb4938	journal	May 2020
Structural and phase analysis of rapidly solidified Al-Fe alloys Tashlykova-Bushkevich, I. I.; Gut’ko, E. S.; Shepelevich, V. G. Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques, Vol. 2, Issue 2 https://doi.org/10.1134/S1027451008020286	journal	April 2008
Metal Additive Manufacturing: A Review of Mechanical Properties Lewandowski, John J.; Seifi, Mohsen Annual Review of Materials Research, Vol. 46, Issue 1 https://doi.org/10.1146/annurev-matsci-070115-032024	journal	July 2016
Effect of Layer Thickness in Selective Laser Melting on Microstructure of Al/5 wt.%Fe ₂ O ₃ Powder Consolidated Parts Dadbakhsh, Sasan; Hao, Liang The Scientific World Journal, Vol. 2014 https://doi.org/10.1155/2014/106129	journal	January 2014
Selective laser melting additive manufacturing of in situ Al ₂ Si ₄ O ₁₀ /Al composites: Microstructural characteristics and mechanical properties Jue, Jiubin; Gu, Dongdong Journal of Composite Materials, Vol. 51, Issue 4 https://doi.org/10.1177/0021998316649251	journal	July 2016
Scandium in aluminium alloys Røyset, J.; Ryum, N. International Materials Reviews, Vol. 50, Issue 1 https://doi.org/10.1179/174328005X14311	journal	February 2005
Correlation between solidification parameters and weld microstructures David, S. A.; Vitek, J. M. International Materials Reviews, Vol. 34, Issue 1 https://doi.org/10.1179/imr.1989.34.1.213	journal	January 1989
Rapid solidification processing with specific application to aluminium alloys Lavernia, E. J.; Ayers, J. D.; Srivatsan, T. S. International Materials Reviews, Vol. 37, Issue 1 https://doi.org/10.1179/imr.1992.37.1.1	journal	January 1992
Joining of aluminium based metal matrix composites Ellis, M. B. D. International Materials Reviews, Vol. 41, Issue 2 https://doi.org/10.1179/imr.1996.41.2.41	journal	January 1996
Dendrite growth in eutectic alloys: the coupled zone Kurz, W.; Fisher, D. J. International Metals Reviews, Vol. 24, Issue 1 https://doi.org/10.1179/imtr.1979.24.1.177	journal	January 1979
Metastable phase formation in rapidly solidified Al–Mo alloys Logan, E. A.; Pratt, J. N.; Loretto, M. H. Materials Science and Technology, Vol. 5, Issue 2 https://doi.org/10.1179/mst.1989.5.2.123	journal	February 1989
Coarsening of oxide inclusions in low alloy steel welds Babu, S. S.; David, S. A.; DebRoy, T. Science and Technology of Welding and Joining, Vol. 1, Issue 1 https://doi.org/10.1179/stw.1996.1.1.17	journal	February 1996
Review and Prospects for Current Studies on Very High Cycle Fatigue of Metallic Materials for Machine Structural Use Sakai, Tatsuo Journal of Solid Mechanics and Materials Engineering, Vol. 3, Issue 3 https://doi.org/10.1299/jmmp.3.425	journal	January 2009
Characterization of Al–Fe–V–Si heat-resistant aluminum alloy components fabricated by selective laser melting Sun, Shaobo; Zheng, Lijing; Liu, Yingying Journal of Materials Research, Vol. 30, Issue 10 https://doi.org/10.1557/jmr.2015.110	journal	May 2015
Processing of Al–12Si–TNM composites by selective laser melting and evaluation of compressive and wear properties Prashanth, Konda G.; Scudino, Sergio; Chaubey, Anil K. Journal of Materials Research, Vol. 31, Issue 1 https://doi.org/10.1557/jmr.2015.326	journal	November 2015
High and very high cycle fatigue failure mechanisms in selective laser melted aluminum alloys Siddique, Shafaqat; Awd, Mustafa; Tenkamp, Jochen Journal of Materials Research, Vol. 32, Issue 23 https://doi.org/10.1557/jmr.2017.314	journal	August 2017
Effect of Oxide Dispersion on Dendritic Grain Growth Characteristics of Cast Aluminum Alloy Kim, Gwang-Ho; Hong, Sung-Mo; Lee, Min-Ku MATERIALS TRANSACTIONS, Vol. 51, Issue 10 https://doi.org/10.2320/matertrans.M2010166	journal	January 2010
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting Buchbinder, Damien; Meiners, Wilhelm; Pirch, Norbert Journal of Laser Applications, Vol. 26, Issue 1 https://doi.org/10.2351/1.4828755	journal	February 2014
Criteria for developing castable, creep-resistant aluminum-based alloys – A review Knipling, Keith E.; Dunand, David C.; Seidman, David N. Zeitschrift für Metallkunde, Vol. 97, Issue 3 https://doi.org/10.3139/146.101249	journal	March 2006
Comparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition Awd, Mustafa; Tenkamp, Jochen; Hirtler, Markus Materials, Vol. 11, Issue 1 https://doi.org/10.3390/ma11010017	journal	December 2017
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review Aversa, Alberta; Marchese, Giulio; Saboori, Abdollah Materials, Vol. 12, Issue 7 https://doi.org/10.3390/ma12071007	journal	March 2019
Corrosion Behaviors of Selective Laser Melted Aluminum Alloys: A Review Chen, Hongwei; Zhang, Chaoqun; Jia, Dan Metals, Vol. 10, Issue 1 https://doi.org/10.3390/met10010102	journal	January 2020
In-Process Fabrication of Carbon-Dispersed Aluminum Matrix Composite Using Selective Laser Melting Kimura, Takahiro; Nakamoto, Takayuki; Suyama, Takeshi Metals, Vol. 10, Issue 5 https://doi.org/10.3390/met10050619	journal	May 2020
Development of a Novel High-Temperature Al Alloy for Laser Powder Bed Fusion Belelli, Filippo; Casati, Riccardo; Riccio, Martina Metals, Vol. 11, Issue 1 https://doi.org/10.3390/met11010035	journal	December 2020
Creep of Al-Sc Microalloys with Rare-Earth Element Additions Karnesky, Richard A.; Seidman, David N.; Dunand, David C. Materials Science Forum, Vol. 519-521 https://doi.org/10.4028/www.scientific.net/MSF.519-521.1035	journal	July 2006

Similar Records

Towards the applications of mechanophore incorporated feedstocks for additive manufacturing

Journal Article · 2023 · Materials Today Communications · OSTI ID:1923219

Rencheck, Mitchell L.; Korey, Matthew; Zhao, Xianhui; +2 more

Additively manufactured and cast high-temperature aluminum alloys for electric vehicle brake rotor application

Journal Article · 2025 · Wear · OSTI ID:2573553

Grejtak, Tomas; Shyam, Amit; Blau, Peter J.; +1 more

Strength stability at high temperatures for additively manufactured alumina forming austenitic alloy

Journal Article · 2024 · Scripta Materialia · OSTI ID:2429843

Hyer, Holden C.; Dryepondt, Sebastien; Su, Yi-Feng; +3 more

Related Subjects

36 MATERIALS SCIENCE
additive manufacturing
alloy design
aluminum alloys
corrosion
economics
high-temperature materials
mechanical properties
microstructure

Title: Towards high-temperature applications of aluminium alloys enabled by additive manufacturing

Citation Formats

References (297)

Similar Records

Related Subjects