A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

Kulkarni, Shank S.; Gupta, Varun; Senor, David; Truster, Timothy; Soulami, Ayoub; Devanathan, Ram

doi:10.1016/j.commatsci.2021.110654

Title: A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

Journal Article · 31 August 2021 · Computational Materials Science

DOI: https://doi.org/10.1016/j.commatsci.2021.110654 · OSTI ID:1798381

Kulkarni, Shank S.; Gupta, Varun; Senor, David; Truster, Timothy; Soulami, Ayoub; Devanathan, Ram

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 1798381

Journal Information:: Computational Materials Science, Journal Name: Computational Materials Science Journal Issue: C Vol. 197; ISSN 0927-0256

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (85)

Modeling of structural failure of Zircaloy claddings induced by multiple hydride cracks Liu, Ruijie; Mostafa, Ahmed; Liu, Zhijun International Journal of Fracture, Vol. 213, Issue 2 https://doi.org/10.1007/s10704-018-0312-9	journal	September 2018
Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242 Deka, Dhyanjyoti; Joseph, Deepu S.; Ghosh, Somnath Metallurgical and Materials Transactions A, Vol. 37, Issue 5 https://doi.org/10.1007/s11661-006-0082-2	journal	May 2006
A Simple Method for Calculating the Possible Habit Planes Containing One Set of Dislocations and its Applications to fcc/bct and hcp/bcc Systems Gu, X. -F.; Zhang, W. -Z. Metallurgical and Materials Transactions A, Vol. 45, Issue 4 https://doi.org/10.1007/s11661-013-2125-9	journal	December 2013
Basal slip in zirconium Akhtar, A. Acta Metallurgica, Vol. 21, Issue 1 https://doi.org/10.1016/0001-6160(73)90213-7	journal	January 1973
Analysis of the cup-cone fracture in a round tensile bar Tvergaard, V.; Needleman, A. Acta Metallurgica, Vol. 32, Issue 1 https://doi.org/10.1016/0001-6160(84)90213-X	journal	January 1984
Overview no. 42 Texture development and strain hardening in rate dependent polycrystals Asaro, R. J.; Needleman, A. Acta Metallurgica, Vol. 33, Issue 6 https://doi.org/10.1016/0001-6160(85)90188-9	journal	June 1985
Effect of hydrogen contents on the mechanical properties of Zircaloy-4 Huang, J. -H.; Huang, S. -P. Journal of Nuclear Materials, Vol. 208, Issue 1-2 https://doi.org/10.1016/0022-3115(94)90208-9	journal	January 1994
A micromechanical model for predicting hydride embrittlement in nuclear fuel cladding material Chan, K. S. Journal of Nuclear Materials, Vol. 227, Issue 3 https://doi.org/10.1016/0022-3115(95)00160-3	journal	January 1996
On the ductile enlargement of voids in triaxial stress fields∗ Rice, J. R.; Tracey, D. M. Journal of the Mechanics and Physics of Solids, Vol. 17, Issue 3 https://doi.org/10.1016/0022-5096(69)90033-7	journal	June 1969
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
The development and applications of zirconium alloys Northwood, Derek O. Materials & Design, Vol. 6, Issue 2 https://doi.org/10.1016/0261-3069(85)90165-7	journal	April 1985
Numerical simulations of stress-strain behavior in two-phase α2 + γ lamellar TiAl alloys Kad, Bimal K.; Dao, Ming; Asaro, Robert J. Materials Science and Engineering: A, Vol. 192-193 https://doi.org/10.1016/0921-5093(94)03210-6	journal	February 1995
Texture and pyramidal slip in Ti, Zr and their alloys Pochettino, A. A.; Gannio, N.; Edwards, C. Vial Scripta Metallurgica et Materialia, Vol. 27, Issue 12 https://doi.org/10.1016/0956-716X(92)90033-B	journal	December 1992
Materials challenges for nuclear systems Allen, Todd; Busby, Jeremy; Meyer, Mitch Materials Today, Vol. 13, Issue 12 https://doi.org/10.1016/S1369-7021(10)70220-0	journal	December 2010
Measurement and prediction of residual stresses and crystallographic texture development in rolled Zircaloy-4 plates: X-ray diffraction and the self-consistent model Gloaguen, D.; Berchi, T.; Girard, E. Acta Materialia, Vol. 55, Issue 13 https://doi.org/10.1016/j.actamat.2007.04.007	journal	August 2007
Modeling lattice strain evolution during uniaxial deformation of textured Zircaloy-2 Xu, F.; Holt, R. A.; Daymond, M. R. Acta Materialia, Vol. 56, Issue 14 https://doi.org/10.1016/j.actamat.2008.04.019	journal	August 2008
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications Roters, F.; Eisenlohr, P.; Hantcherli, L. Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.058	journal	February 2010
In situ study of hydride precipitation kinetics and re-orientation in Zircaloy using synchrotron radiation Colas, K. B.; Motta, A. T.; Almer, J. D. Acta Materialia, Vol. 58, Issue 20 https://doi.org/10.1016/j.actamat.2010.07.018	journal	December 2010
〈a〉 Prismatic, 〈a〉 basal, and 〈c+a〉 slip strengths of commercially pure Zr by micro-cantilever tests Gong, Jicheng; Benjamin Britton, T.; Cuddihy, Mitchell A. Acta Materialia, Vol. 96 https://doi.org/10.1016/j.actamat.2015.06.020	journal	September 2015
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing Quey, R.; Dawson, P. R.; Barbe, F. Computer Methods in Applied Mechanics and Engineering, Vol. 200, Issue 17-20 https://doi.org/10.1016/j.cma.2011.01.002	journal	April 2011
Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models Knezevic, Marko; Drach, Borys; Ardeljan, Milan Computer Methods in Applied Mechanics and Engineering, Vol. 277 https://doi.org/10.1016/j.cma.2014.05.003	journal	August 2014
A finite element methodology to incorporate kinematic activation of discrete deformation twins in a crystal plasticity framework Kasemer, Matthew; Dawson, Paul Computer Methods in Applied Mechanics and Engineering, Vol. 358 https://doi.org/10.1016/j.cma.2019.112653	journal	January 2020
Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between 25°C and 480°C under various stress states, including RIA loading conditions Le Saux, M.; Besson, J.; Carassou, S. Engineering Failure Analysis, Vol. 17, Issue 3 https://doi.org/10.1016/j.engfailanal.2009.07.001	journal	April 2010
A local criterion for ductile fracture under low-triaxiality axisymmetric stress states Smith, Christopher; Kanvinde, Amit; Deierlein, Gregory Engineering Fracture Mechanics, Vol. 169 https://doi.org/10.1016/j.engfracmech.2016.10.011	journal	January 2017
A coupled crystal plasticity FEM and phase-field model for crack evolution in microstructures of 7000 series aluminum alloys Tu, Xiaohui; Ray, Arunava; Ghosh, Somnath Engineering Fracture Mechanics, Vol. 230 https://doi.org/10.1016/j.engfracmech.2020.106970	journal	May 2020
Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements Knezevic, Marko; Crapps, Justin; Beyerlein, Irene J. International Journal of Mechanical Sciences, Vol. 105 https://doi.org/10.1016/j.ijmecsci.2015.11.021	journal	January 2016
Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity Diard, O.; Leclercq, S.; Rousselier, G. International Journal of Plasticity, Vol. 21, Issue 4 https://doi.org/10.1016/j.ijplas.2004.05.017	journal	April 2005
Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method Kanjarla, Anand Krishna; Van Houtte, Paul; Delannay, Laurent International Journal of Plasticity, Vol. 26, Issue 8 https://doi.org/10.1016/j.ijplas.2009.05.005	journal	August 2010
Multiscale modelling of the induced plastic anisotropy in bcc metals Hamelin, C. J.; Diak, B. J.; Pilkey, A. K. International Journal of Plasticity, Vol. 27, Issue 8 https://doi.org/10.1016/j.ijplas.2011.01.003	journal	August 2011
Incorporation of twinning into a crystal plasticity finite element model: Evolution of lattice strains and texture in Zircaloy-2 Abdolvand, Hamidreza; Daymond, Mark R.; Mareau, Charles International Journal of Plasticity, Vol. 27, Issue 11 https://doi.org/10.1016/j.ijplas.2011.04.005	journal	November 2011
A dislocation-based multi-rate single crystal plasticity model Hansen, B. L.; Beyerlein, I. J.; Bronkhorst, C. A. International Journal of Plasticity, Vol. 44 https://doi.org/10.1016/j.ijplas.2012.12.006	journal	May 2013
Incorporating interface affected zones into crystal plasticity Mayeur, J. R.; Beyerlein, I. J.; Bronkhorst, C. A. International Journal of Plasticity, Vol. 65 https://doi.org/10.1016/j.ijplas.2014.08.013	journal	February 2015
Strain localization and failure in irradiated zircaloy with crystal plasticity Erinosho, T. O.; Dunne, F. P. E. International Journal of Plasticity, Vol. 71 https://doi.org/10.1016/j.ijplas.2015.05.008	journal	August 2015
Deformation behavior upon two-step loading in a magnesium alloy sheet Hama, Takayuki; Tanaka, Yuhki; Uratani, Masato International Journal of Plasticity, Vol. 82 https://doi.org/10.1016/j.ijplas.2016.03.009	journal	July 2016
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy Ardeljan, Milan; Beyerlein, Irene J.; McWilliams, Brandon A. International Journal of Plasticity, Vol. 83 https://doi.org/10.1016/j.ijplas.2016.04.005	journal	August 2016
On the effects of reorientation and shear transfer during twin formation: Comparison between high resolution electron backscatter diffraction experiments and a crystal plasticity finite element model Abdolvand, Hamidreza; Wilkinson, Angus J. International Journal of Plasticity, Vol. 84 https://doi.org/10.1016/j.ijplas.2016.05.006	journal	September 2016
A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys Li, Hongwei; Sun, Xinxin; Yang, He International Journal of Plasticity, Vol. 87 https://doi.org/10.1016/j.ijplas.2016.09.008	journal	December 2016
Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet Hama, Takayuki; Kobuki, Akihiro; Takuda, Hirohiko International Journal of Plasticity, Vol. 91 https://doi.org/10.1016/j.ijplas.2016.12.005	journal	April 2017
Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling Ardeljan, Milan; Beyerlein, Irene J.; Knezevic, Marko International Journal of Plasticity, Vol. 99 https://doi.org/10.1016/j.ijplas.2017.09.002	journal	December 2017
Modeling the evolution of microtextured regions during α / β processing using the crystal plasticity finite element method Ma, Ran; Pilchak, Adam L.; Semiatin, S. Lee International Journal of Plasticity, Vol. 107 https://doi.org/10.1016/j.ijplas.2018.04.004	journal	August 2018
On the effects of hardening models and lattice rotations in strain gradient crystal plasticity simulations Bittencourt, Eduardo International Journal of Plasticity, Vol. 108 https://doi.org/10.1016/j.ijplas.2018.05.004	journal	September 2018
Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment Baudoin, Pierre; Hama, Takayuki; Takuda, Hirohiko International Journal of Plasticity, Vol. 115 https://doi.org/10.1016/j.ijplas.2018.11.013	journal	April 2019
Progressive modelling and experimentation of hydrogen diffusion and precipitation in anisotropic polycrystals Abdolvand, Hamidreza International Journal of Plasticity, Vol. 116 https://doi.org/10.1016/j.ijplas.2018.12.005	journal	May 2019
Interpretation of the size effects in micropillar compression by a strain gradient crystal plasticity theory Bittencourt, Eduardo International Journal of Plasticity, Vol. 116 https://doi.org/10.1016/j.ijplas.2019.01.011	journal	May 2019
Development of a thermo-mechanically coupled crystal plasticity modeling framework: Application to polycrystalline homogenization Li, Jifeng; Romero, Ignacio; Segurado, Javier International Journal of Plasticity, Vol. 119 https://doi.org/10.1016/j.ijplas.2019.04.008	journal	August 2019
Investigating mesh sensitivity and polycrystalline RVEs in crystal plasticity finite element simulations Lim, Hojun; Battaile, Corbett C.; Bishop, Joseph E. International Journal of Plasticity, Vol. 121 https://doi.org/10.1016/j.ijplas.2019.06.001	journal	October 2019
Twinning and detwinning behaviors of commercially pure titanium sheets Ma, Chao; Wang, Huamiao; Hama, Takayuki International Journal of Plasticity, Vol. 121 https://doi.org/10.1016/j.ijplas.2019.06.010	journal	October 2019
Orientation-dependent irradiation hardening in pure Zr studied by nanoindentation, electron microscopies, and crystal plasticity finite element modeling Wang, Qiang; Cochrane, Christopher; Skippon, Travis International Journal of Plasticity, Vol. 124 https://doi.org/10.1016/j.ijplas.2019.08.007	journal	January 2020
Constitutive modeling of δ-phase zircaloy hydride based on strain rate dependent nanoindentation and nano-scale impact dataset Wang, Hao; Thomas, Jonova; Okuniewski, Maria A. International Journal of Plasticity, Vol. 133 https://doi.org/10.1016/j.ijplas.2020.102787	journal	October 2020
A non-local crystal plasticity constitutive model for hexagonal close-packed polycrystals Sedaghat, Omid; Abdolvand, Hamidreza International Journal of Plasticity, Vol. 136 https://doi.org/10.1016/j.ijplas.2020.102883	journal	January 2021
A multiplicative finite strain crystal plasticity formulation based on additive elastic corrector rates: Theory and numerical implementation Zhang, Meijuan; Nguyen, K.; Segurado, Javier International Journal of Plasticity, Vol. 137 https://doi.org/10.1016/j.ijplas.2020.102899	journal	February 2021
On the extension of the Gurson-type porous plasticity models for prediction of ductile fracture under shear-dominated conditions Zhou, Jun; Gao, Xiaosheng; Sobotka, James C. International Journal of Solids and Structures, Vol. 51, Issue 18 https://doi.org/10.1016/j.ijsolstr.2014.05.028	journal	September 2014
Evaluation of elastic–viscoplastic self-consistent polycrystal plasticity models for zirconium alloys Qiao, H.; Wu, P. D.; Wang, H. International Journal of Solids and Structures, Vol. 71 https://doi.org/10.1016/j.ijsolstr.2015.07.004	journal	October 2015
Quantifying hydrogen concentration in the vicinity of zirconium hydrides and deformation twins Tondro, Alireza; Abdolvand, Hamidreza Journal of the Mechanics and Physics of Solids, Vol. 148 https://doi.org/10.1016/j.jmps.2020.104287	journal	March 2021
Investigation of mechanical properties of ε-zirconium hydride using micro- and nano-indentation techniques Xu, Jiujun; Shi, San-Qiang Journal of Nuclear Materials, Vol. 327, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2004.02.004	journal	May 2004
Zirconium alloys for supercritical water reactor applications: Challenges and possibilities Motta, Arthur T.; Yilmazbayhan, Aylin; da Silva, Marcelo J. Gomes Journal of Nuclear Materials, Vol. 371, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2007.05.022	journal	September 2007
Identification and quantification of hydride phases in Zircaloy-4 cladding using synchrotron X-ray diffraction Daum, R. S.; Chu, Y. S.; Motta, A. T. Journal of Nuclear Materials, Vol. 392, Issue 3 https://doi.org/10.1016/j.jnucmat.2009.04.004	journal	August 2009
Review of the thermodynamic basis for models of delayed hydride cracking rate in zirconium alloys Puls, Manfred P. Journal of Nuclear Materials, Vol. 393, Issue 2 https://doi.org/10.1016/j.jnucmat.2009.06.022	journal	September 2009
Modeling texture evolution during uni-axial deformation of Zircaloy-2 Xu, F.; Holt, R. A.; Daymond, M. R. Journal of Nuclear Materials, Vol. 394, Issue 1 https://doi.org/10.1016/j.jnucmat.2009.07.006	journal	October 2009
An elasto-plastic fracture mechanics based model for assessment of hydride embrittlement in zircaloy cladding tubes Nilsson, Karl-Fredrik; Jakšić, Nikola; Vokál, Vratko Journal of Nuclear Materials, Vol. 396, Issue 1 https://doi.org/10.1016/j.jnucmat.2009.10.056	journal	January 2010
Revisiting the method to obtain the mechanical properties of hydrided fuel cladding in the hoop direction Martín-Rengel, M. A.; Gómez Sánchez, F. J.; Ruiz-Hervías, J. Journal of Nuclear Materials, Vol. 429, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.06.003	journal	October 2012
In situ studies and modeling of the deformation and fracture mechanism for wrought Zircaloy-4 and Zircaloy-2 as a function of stress-state Cockeram, B. V.; Chan, K. S. Journal of Nuclear Materials, Vol. 434, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2012.11.005	journal	March 2013
Effect of thermo-mechanical cycling on zirconium hydride reorientation studied in situ with synchrotron X-ray diffraction Colas, Kimberly B.; Motta, Arthur T.; Daymond, Mark R. Journal of Nuclear Materials, Vol. 440, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.047	journal	September 2013
Modeling the tension–compression asymmetric yield behavior of β-treated Zircaloy-4 Zhai, Jinyuan; Gao, Xiaosheng; Sobotka, James C. Journal of Nuclear Materials, Vol. 451, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.04.017	journal	August 2014
Nanoindentation measurements of the mechanical properties of zirconium matrix and hydrides in unirradiated pre-hydrided nuclear fuel cladding Rico, A.; Martin-Rengel, M. A.; Ruiz-Hervias, J. Journal of Nuclear Materials, Vol. 452, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.04.045	journal	September 2014
Modeling and simulation of hydrogen behavior in Zircaloy-4 fuel cladding Courty, Olivier; Motta, Arthur T.; Hales, Jason D. Journal of Nuclear Materials, Vol. 452, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.05.013	journal	September 2014
Pilgering of Zircaloy-4: Experiments and simulations Gurao, N. P.; Akhiani, H.; Szpunar, J. A. Journal of Nuclear Materials, Vol. 453, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.06.047	journal	October 2014
Effects of hydride morphology on the embrittlement of Zircaloy-4 cladding Kim, Ju-Seong; Kim, Tae-Hoon; Kook, Dong-Hak Journal of Nuclear Materials, Vol. 456 https://doi.org/10.1016/j.jnucmat.2014.09.025	journal	January 2015
A review on hydride precipitation in zirconium alloys Bair, Jacob; Asle Zaeem, Mohsen; Tonks, Michael Journal of Nuclear Materials, Vol. 466 https://doi.org/10.1016/j.jnucmat.2015.07.014	journal	November 2015
The role of stress-state on the deformation and fracture mechanism of hydrided and non-hydrided Zircaloy-4 Cockeram, B. V.; Hollenbeck, J. L. Journal of Nuclear Materials, Vol. 467 https://doi.org/10.1016/j.jnucmat.2015.09.012	journal	December 2015
Study of the mechanical behavior of the hydride blister/rim structure in Zircaloy-4 using in-situ synchrotron X-ray diffraction Lin, Jun-li; Han, Xiaochun; Heuser, Brent J. Journal of Nuclear Materials, Vol. 471 https://doi.org/10.1016/j.jnucmat.2015.12.048	journal	April 2016
Micro-scale fracture experiments on zirconium hydrides and phase boundaries Chan, H.; Roberts, S. G.; Gong, J. Journal of Nuclear Materials, Vol. 475 https://doi.org/10.1016/j.jnucmat.2016.03.026	journal	July 2016
Azimuthally anisotropic hydride lens structures in Zircaloy 4 nuclear fuel cladding: High-resolution neutron radiography imaging and BISON finite element analysis Lin, Jun-Li; Zhong, Weicheng; Bilheux, Hassina Z. Journal of Nuclear Materials, Vol. 496 https://doi.org/10.1016/j.jnucmat.2017.09.025	journal	December 2017
Chemical and microstructural characterization of a 9 cycle Zircaloy-2 cladding using EPMA and FIB tomography Baris, A.; Restani, R.; Grabherr, R. Journal of Nuclear Materials, Vol. 504 https://doi.org/10.1016/j.jnucmat.2018.01.065	journal	June 2018
The effect of cooling rate and grain size on hydride microstructure in Zircaloy-4 Birch, Ruth; Wang, Siyang; Tong, Vivian S. Journal of Nuclear Materials, Vol. 513 https://doi.org/10.1016/j.jnucmat.2018.11.011	journal	January 2019
Hydrogen in zirconium alloys: A review Motta, Arthur T.; Capolungo, Laurent; Chen, Long-Qing Journal of Nuclear Materials, Vol. 518 https://doi.org/10.1016/j.jnucmat.2019.02.042	journal	May 2019
How semi-coherent b.c.c. hydride interfacial interactions affect the inelastic deformation and fracture behavior of h.c.p. zirconium alloys Ziaei, S.; Zikry, M. A. Mechanics of Materials, Vol. 130 https://doi.org/10.1016/j.mechmat.2018.12.015	journal	March 2019
Influence of stress field of expanding and contracting plate shaped precipitate on hydride embrittlement of Zr-alloys Singh, R. N.; Khandelwal, H. K.; Bind, A. K. Materials Science and Engineering: A, Vol. 579 https://doi.org/10.1016/j.msea.2013.04.117	journal	September 2013
Effects of hydrogen contents on the mechanical properties of Zircaloy-4 sheets Tung, Hsiao-Ming; Chen, Tai-Cheng; Tseng, Che-Chung Materials Science and Engineering: A, Vol. 659 https://doi.org/10.1016/j.msea.2016.02.051	journal	April 2016
Fracture of Zircaloy-4 Fuel Cladding Tubes with Hydride Blisters Macdonald, Vincent; Le Boulch, David; Menibus, Arthur Hellouin de Procedia Materials Science, Vol. 3 https://doi.org/10.1016/j.mspro.2014.06.041	journal	January 2014
Microstructural and Material Properties of Individual Zirconium Hydride Domains Formed Under Simulated Conditions Riechers, Shawn; Johnson, Brad Microscopy and Microanalysis, Vol. 24, Issue S1 https://doi.org/10.1017/S1431927618005755	journal	August 2018
A quantitative evaluation of the deformation texture predictions for aluminium alloys from crystal plasticity finite element method Li, Saiyi; Houtte, Paul Van; Kalidindi, Surya R. Modelling and Simulation in Materials Science and Engineering, Vol. 12, Issue 5 https://doi.org/10.1088/0965-0393/12/5/006	journal	July 2004
Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation Nassif, Omar; Truster, Timothy J.; Ma, Ran Modelling and Simulation in Materials Science and Engineering, Vol. 27, Issue 7 https://doi.org/10.1088/1361-651X/ab359c	journal	August 2019
Bakerian Lecture. The Distortion of an Aluminium Crystal during a Tensile Test Taylor, G. I.; Elam, C. F. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 102, Issue 719 https://doi.org/10.1098/rspa.1923.0023	journal	March 1923
Microstructure based modeling of friction stir welded joint of dissimilar metals using crystal plasticity Kulkarni, Shank; Truster, Timothy; Das, Hrishikesh Journal of Manufacturing Science and Engineering https://doi.org/10.1115/1.4051190	journal	May 2021

Similar Records

A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

Journal Article · 2021 · Computational Materials Science · OSTI ID:1818129

Kulkarni, Shank S.; Gupta, Varun; Senor, David J.; +3 more

TEM Approaches for Microstructure-Informed Prediction of Mechanical Properties in Structural Alloys

Journal Article · 2026 · Microscopy and Microanalysis · OSTI ID:3451689

Lin, Yan-Ru; deJong, Matt M.; Proehl, Emily; +3 more

INFLUENCE OF THE PRECIPITATES ON THE MECHANICAL PROPERTIES OF Zr--Cu ALLOYS.

Journal Article · 1966 · Mem. Sci. Rev. Met., 44: 249-60 (Mar. 1967). · OSTI ID:4347683

Armand, M; Demars, H; Givord, J P

Title: A microstructure-based modeling approach to predict the mechanical properties of Zr alloy with hydride precipitates

Citation Formats

References (85)

Similar Records

Related Subjects