Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades

Norgren, Alex; Carpenter, Alberta; Heath, Garvin

doi:10.1007/s40831-020-00313-3

Title: Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades

Journal Article · 02 December 2020 · Journal of Sustainable Metallurgy

DOI: https://doi.org/10.1007/s40831-020-00313-3 · OSTI ID:1730973

Norgren, Alex; Carpenter, Alberta;

Abstract The global growth of clean energy technology deployment will be followed by parallel growth in end-of-life (EOL) products, bringing both challenges and opportunities. Cumulatively, by 2050, estimates project 78 million tonnes of raw materials embodied in the mass of EOL photovoltaic (PV) modules, 12 billion tonnes of wind turbine blades, and by 2030, 11 million tonnes of lithium-ion batteries. Owing partly to concern that the projected growth of these technologies could become constrained by raw material availability, processes for recycling them at EOL continue to be developed. However, none of these technologies are typically designed with recycling in mind, and all of them present challenges to efficient recycling. This article synthesizes and extends design for recycling (DfR) principles based on a review of published industrial and academic best practices as well as consultation with experts in the field. Specific principles developed herein apply to crystalline-silicon PV modules, batteries like those used in electric vehicles, and wind turbine blades, while a set of broader principles applies to all three of these technologies and potentially others. These principles are meant to be useful for stakeholders—such as research and development managers, analysts, and policymakers—in informing and promoting decisions that facilitate DfR and, ultimately, increase recycling rates as a way to enhance the circularity of the clean energy economy. The article also discusses some commercial implications of DfR. Graphical Abstract

View Journal Article

Cite

Export

Save

Research Organization:: National Renewable Energy Laboratory (NREL), Golden, CO (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC36-08GO28308

OSTI ID:: 1730973

Report Number(s):: NREL/JA-6A20-75585; PII: 313

Journal Information:: Journal of Sustainable Metallurgy, Journal Name: Journal of Sustainable Metallurgy Journal Issue: 4 Vol. 6; ISSN 2199-3823

Publisher:: Springer Science + Business MediaCopyright Statement

Country of Publication:: United States

Language:: English

References (40)

Kinetic study of the dissolution of metallic nickel in sulphuric acid solutions in the presence of different oxidants Bilczuk, Dario; Olvera, Oscar G.; Asselin, Edouard The Canadian Journal of Chemical Engineering, Vol. 94, Issue 10 https://doi.org/10.1002/cjce.22576	journal	August 2016
Life cycle assessment of photovoltaic manufacturing consortium (PVMC) copper indium gallium (di)selenide (CIGS) modules Amarakoon, Shanika; Vallet, Cyril; Curran, Mary Ann The International Journal of Life Cycle Assessment, Vol. 23, Issue 4 https://doi.org/10.1007/s11367-017-1345-4	journal	July 2017
Product-Centric Simulation-Based Design for Recycling: Case of LED Lamp Recycling Reuter, M. A.; van Schaik, A. Journal of Sustainable Metallurgy, Vol. 1, Issue 1 https://doi.org/10.1007/s40831-014-0006-0	journal	February 2015
The Recycling of Spent Lithium-Ion Batteries: a Review of Current Processes and Technologies Li, Li; Zhang, Xiaoxiao; Li, Matthew Electrochemical Energy Reviews, Vol. 1, Issue 4 https://doi.org/10.1007/s41918-018-0012-1	journal	September 2018
Demanufacturing photovoltaic panels: Comparison of end-of-life treatment strategies for improved resource recovery Duflou, Joost R.; Peeters, Jef R.; Altamirano, Diego CIRP Annals, Vol. 67, Issue 1 https://doi.org/10.1016/j.cirp.2018.04.053	journal	January 2018
Encapsulant for glass-glass PV modules for minimum optical losses: gas or EVA? Couderc, Romain; Amara, Mohamed; Degoulange, Julien Energy Procedia, Vol. 124 https://doi.org/10.1016/j.egypro.2017.09.283	journal	September 2017
A study of the separation of cobalt from spent Li-ion battery residues Dorella, Germano; Mansur, Marcelo Borges Journal of Power Sources, Vol. 170, Issue 1 https://doi.org/10.1016/j.jpowsour.2007.04.025	journal	June 2007
Ease of disassembly of products to support circular economy strategies Vanegas, Paul; Peeters, Jef R.; Cattrysse, Dirk Resources, Conservation and Recycling, Vol. 135 https://doi.org/10.1016/j.resconrec.2017.06.022	journal	August 2018
A techno-economic review of silicon photovoltaic module recycling Deng, Rong; Chang, Nathan L.; Ouyang, Zi Renewable and Sustainable Energy Reviews, Vol. 109 https://doi.org/10.1016/j.rser.2019.04.020	journal	July 2019
Comparative studies of encapsulation and glass surface modification impacts on PV performance in a desert climate Walwil, Husam M.; Mukhaimer, A.; Al-Sulaiman, F. A. Solar Energy, Vol. 142 https://doi.org/10.1016/j.solener.2016.12.020	journal	January 2017
Structure and basic properties of photovoltaic module backsheet films Geretschläger, Klaus J.; Wallner, Gernot M.; Fischer, Jörg Solar Energy Materials and Solar Cells, Vol. 144 https://doi.org/10.1016/j.solmat.2015.09.060	journal	January 2016
A cost roadmap for silicon heterojunction solar cells Louwen, Atse; van Sark, Wilfried; Schropp, Ruud Solar Energy Materials and Solar Cells, Vol. 147 https://doi.org/10.1016/j.solmat.2015.12.026	journal	April 2016
Life Cycle Assessment of an innovative recycling process for crystalline silicon photovoltaic panels Latunussa, Cynthia E. L.; Ardente, Fulvio; Blengini, Gian Andrea Solar Energy Materials and Solar Cells, Vol. 156 https://doi.org/10.1016/j.solmat.2016.03.020	journal	November 2016
Degradation of thermally-cured silicone encapsulant under terrestrial UV Cai, Can; Miller, David C.; Tappan, Ian A. Solar Energy Materials and Solar Cells, Vol. 157 https://doi.org/10.1016/j.solmat.2016.05.065	journal	December 2016
The future of automotive lithium-ion battery recycling: Charting a sustainable course Gaines, Linda Sustainable Materials and Technologies, Vol. 1-2 https://doi.org/10.1016/j.susmat.2014.10.001	journal	December 2014
Silicon photovoltaic modules at end-of-life: Removal of polymeric layers and separation of materials Fiandra, Valeria; Sannino, Lucio; Andreozzi, Concetta Waste Management, Vol. 87 https://doi.org/10.1016/j.wasman.2019.02.004	journal	March 2019
Resource efficient recovery of critical and precious metals from waste silicon PV panel recycling Ardente, Fulvio; Latunussa, Cynthia E. L.; Blengini, Gian Andrea Waste Management, Vol. 91 https://doi.org/10.1016/j.wasman.2019.04.059	journal	May 2019
Life Cycle Assessment of a Vanadium Redox Flow Battery Weber, Selina; Peters, Jens F.; Baumann, Manuel Environmental Science & Technology, Vol. 52, Issue 18 https://doi.org/10.1021/acs.est.8b02073	journal	August 2018
Recycling Perovskite Solar Cells To Avoid Lead Waste Binek, Andreas; Petrus, Michiel L.; Huber, Niklas ACS Applied Materials & Interfaces, Vol. 8, Issue 20 https://doi.org/10.1021/acsami.6b03767	journal	May 2016
Proof-of-concept for facile perovskite solar cell recycling Kadro, Jeannette M.; Pellet, Norman; Giordano, Fabrizio Energy & Environmental Science, Vol. 9, Issue 10 https://doi.org/10.1039/c6ee02013e	journal	January 2016
Encapsulating perovskite solar cells to withstand damp heat and thermal cycling Cheacharoen, Rongrong; Boyd, Caleb C.; Burkhard, George F. Sustainable Energy & Fuels, Vol. 2, Issue 11 https://doi.org/10.1039/c8se00250a	journal	January 2018
Recycling of electrochemical storage devices Leisegang, T.; Treffer, Frank ELECTROCHEMICAL STORAGE MATERIALS: SUPPLY, PROCESSING, RECYCLING AND MODELLING: Proceedings of the 2nd International Freiberg Conference on Electrochemical Storage Materials, AIP Conference Proceedings https://doi.org/10.1063/1.4961898	conference	January 2016
Eddy Current Separation of Fine Non-Ferrous Particles from Bulk Streams Settimo, Francesca; Bevilacqua, Paolo; Rem, Peter Physical Separation in Science and Engineering, Vol. 13, Issue 1 https://doi.org/10.1080/00207390410001710726	journal	January 2004
Use of waste derived fuels in cement industry: a review Chatziaras, Nickolaos; Psomopoulos, Constantinos S.; Themelis, Nickolas J. Management of Environmental Quality: An International Journal, Vol. 27, Issue 2 https://doi.org/10.1108/MEQ-01-2015-0012	journal	March 2016
Addressing Hotspots in the Product Environmental Footprint of CdTe Photovoltaics Sinha, Parikhit; Wade, Andreas IEEE Journal of Photovoltaics https://doi.org/10.1109/JPHOTOV.2018.2802786	journal	January 2018
An optical comparison of silicone and EVA encapsulants for conventional silicon PV modules: A ray-tracing study McIntosh, Keith R.; Cotsell, James N.; Cumpston, Jeff S. 2009 34th IEEE Photovoltaic Specialists Conference (PVSC) https://doi.org/10.1109/PVSC.2009.5411624	conference	June 2009
NICE module technology - From the concept to mass production: A 10 years review Dupuis, Julien; Saint-Sernin, Etienne; Nichiporuk, Oleksiy 2012 IEEE 38th Photovoltaic Specialists Conference (PVSC), 2012 38th IEEE Photovoltaic Specialists Conference https://doi.org/10.1109/PVSC.2012.6318254	conference	June 2012
Development of conductive back-sheet for manufacture of PV modules with back-contact cells Bennett, Ian J.; Janssen, Robert HC; van Duijnhoven, Frank 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC) https://doi.org/10.1109/PVSC.2018.8547995	conference	June 2018
Design for Disassembly Criteria in EU Product Policies for a More Circular Economy: A Method for Analyzing Battery Packs in PC-Tablets and Subnotebooks: Design for Disassembly Criteria for New Computers Talens Peiró, Laura; Ardente, Fulvio; Mathieux, Fabrice Journal of Industrial Ecology, Vol. 21, Issue 3 https://doi.org/10.1111/jiec.12608	journal	May 2017
Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms: Key Concepts and Terms for Circular Product Design den Hollander, Marcel C.; Bakker, Conny A.; Hultink, Erik Jan Journal of Industrial Ecology, Vol. 21, Issue 3 https://doi.org/10.1111/jiec.12610	journal	May 2017
High Efficiency Silver-Free Heterojunction Silicon Solar Cell Hernández, José Luis; Yoshikawa, Kunta; Feltrin, Andrea Japanese Journal of Applied Physics, Vol. 51 https://doi.org/10.1143/JJAP.51.10NA04	journal	October 2012
Influence of Metal Impurities or Additives in the Electrolyte of a Vanadium Redox Flow Battery Park, Jong Ho; Park, Jung Jin; Lee, Hyun Ju Journal of The Electrochemical Society, Vol. 165, Issue 7 https://doi.org/10.1149/2.0491807jes	journal	January 2018
Economic Feasibility for Recycling of Waste Crystalline Silicon Photovoltaic Modules D’Adamo, Idiano; Miliacca, Michela; Rosa, Paolo International Journal of Photoenergy, Vol. 2017 https://doi.org/10.1155/2017/4184676	journal	January 2017
The Role and Influence of Impurities on the Quality of Copper Cathodes Steinacker, Stephan; Antrekowitsch, Jürgen MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, The publications of the MultiScience - XXXI. MicroCAD International Scientific Conference https://doi.org/10.26649/musci.2017.023	conference	January 2017
Overview of the Development of the Fluoropolymer Industry Teng, Hongxiang Applied Sciences, Vol. 2, Issue 2 https://doi.org/10.3390/app2020496	journal	May 2012
Sustainable Hydrometallurgical Recovery of Valuable Elements from Spent Nickel–Metal Hydride HEV Batteries Korkmaz, Kivanc; Alemrajabi, Mahmood; Rasmuson, Åke Metals, Vol. 8, Issue 12 https://doi.org/10.3390/met8121062	journal	December 2018
A Review of the Potential for the Recovery of Wind Turbine Blade Waste Materials Psomopoulos, Constantinos; Kalkanis, Konstantinos; Kaminaris, Stavros Recycling, Vol. 4, Issue 1 https://doi.org/10.3390/recycling4010007	journal	January 2019
Assessing Rare Metal Availability Challenges for Solar Energy Technologies Grandell, Leena; Höök, Mikael Sustainability, Vol. 7, Issue 9 https://doi.org/10.3390/su70911818	journal	August 2015
Secured Intrinsic Under-Pressure in the NICE Modules - The Oxygen Gettering Approach Nichiporuk, O.; Dupuis, J.; Saint-Sernin, E. WIP https://doi.org/10.4229/27thEUPVSEC2012-4BV.3.10	text	January 2012
Thermal degradation of tetrafluoroethylene and hydrofluoroethylene polymers in a vacuum Madorsky, S. I.; Hart, V. E.; Straus, S. Journal of Research of the National Bureau of Standards, Vol. 51, Issue 6 https://doi.org/10.6028/jres.051.036	journal	December 1953

Similar Records

PV Module Design for Recycling Guidelines

Technical Report · 2021 · OSTI ID:1832877

Bilbao, Jose I.; Heath, Garvin; Norgren, Alex; +3 more

Wind turbine blade material in the United States: Quantities, costs, and end-of-life options

Journal Article · 2021 · Resources, Conservation and Recycling · OSTI ID:1765605

Cooperman, Aubryn; Eberle, Annika; Lantz, Eric

Agent-Based Modeling for the Circular Economy: Lessons Learned From Three Case Studies

Conference · 2022 · OSTI ID:1900014

Walzberg, Julien; Eberle, Annika; Carpenter, Alberta; +1 more

Related Subjects

36 MATERIALS SCIENCE
DfR
PV
batteries
design for disassembly
design for environment
wind

Title: Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades

Citation Formats

References (40)

Similar Records

Related Subjects