A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles

Yang, Q.; Ma, Y.; Chen, Z.; Ji, G.; Wang, M. L.; Zhong, S. Y.; Wu, Y.; Ji, V.; Wang, H. W.

doi:10.1016/j.mtla.2019.100458

Title: A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles

Full Record
Other Related Research

Authors:

Yang, Q.; Ma, Y.; Chen, Z.;

; Wang, M. L.; Zhong, S. Y.; Wu, Y.;

; Wang, H. W.

Publication Date:: 2019-12-01

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1704028

Grant/Contract Number:: 2018YFB1106302

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materialia

Additional Journal Information:: Journal Name: Materialia Journal Volume: 8 Journal Issue: C; Journal ID: ISSN 2589-1529

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Yang, Q., Ma, Y., Chen, Z., Ji, G., Wang, M. L., Zhong, S. Y., Wu, Y., Ji, V., and Wang, H. W.. A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles.  Netherlands: N. p., 2019. 
Web.  https://doi.org/10.1016/j.mtla.2019.100458.

Copy to clipboard


                    Yang, Q., Ma, Y., Chen, Z., Ji, G., Wang, M. L., Zhong, S. Y., Wu, Y., Ji, V., & Wang, H. W.. A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles.  Netherlands.  https://doi.org/10.1016/j.mtla.2019.100458

Copy to clipboard


                    Yang, Q., Ma, Y., Chen, Z., Ji, G., Wang, M. L., Zhong, S. Y., Wu, Y., Ji, V., and Wang, H. W.. Sun .  
"A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles".  Netherlands.  https://doi.org/10.1016/j.mtla.2019.100458.

Copy to clipboard


                    
@article{osti_1704028,

  title        = {A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles},

  author       = {Yang, Q. and Ma, Y. and Chen, Z. and Ji, G. and Wang, M. L. and Zhong, S. Y. and Wu, Y. and Ji, V. and Wang, H. W.},

  abstractNote = {},

  doi          = {10.1016/j.mtla.2019.100458},

  journal      = {Materialia},

  number       = C,

  volume       = 8,

  place        = {Netherlands},

  year         = {2019},

  month        = {12}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.mtla.2019.100458

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

POWDER-FABRICATED MAGNESIUM ALLOYS. PART 1. DEVELOPMENT OF HIGH-STRENGTH SHEET FROM POWDER-FABRICATED Mg ALLOYS CONTAINING Zn, Zr, AND Al

Technical Report Johnson, H.A. ed.
High damping Al-Fe-Mo-Si/Zn-Al composites produced by rapidly solidified powder metallurgy process

Journal Article Li, P Y ; Dai, S L ; Chai, S C ; ... - Scripta Materialia

The metallic materials commonly used in aircraft and aerospace fields, such as aluminum and titanium alloys, steels, etc., show extremely low damping capacity (usually of the order of or less than 10{sup {minus}3}). Thus, some problems related to vibration may emerge and influence the reliability, safety and life of airplanes, satellites, etc. It has been reported that almost two thirds of errors for rockets and satellites are related to vibration and noise. One effective way to solve these vibration-related problems is to adopt high damping metallic materials. Conventional high damping alloys exhibit damping capacity above 10{sup {minus}2}, however, their densitiesmore »« less
https://doi.org/10.1016/S1359-6462(00)00321-3
THIRD QUARTERLY REPORT FOR OCTOBER 15, 1951 TO JANUARY 15, 1952. PART 1. DEVELOPMENT OF HIGH STRENGTH SHEET FROM POWDER FABRICATED Mg ALLOYS CONTAINING Zn, Zr, AND Al. REPORT NO. 15501

Technical Report
Fabrication on a laboratory scale and mechanical properties of Cu-Nb-Sn multifilamentary superconducting composite wires produced by cold powder metallurgy processing

Journal Article Fluekiger, R ; Akihama, R ; Foner, S ; ... - Appl. Phys. Lett.; (United States)

Superconducting Cu-Nb-Sn multifilamentary composites are fabricated inexpensively on a laboratory scale. Small (40 ..mu..m) particles of Cu and Nb are compacted, placed in a suitable external jacket for containment, then elongated at room temperature to form a multifilamentary circular wire. Processing yields a multifilamentary Cu-Nb-Sn superconductor with high overall critical current densities J/sub c/ at high magnetic fields. Measurements of the mechanical properties show no degradation of J/sub c/ for strains greater than 1% for composite made with a large areal reduction ratio.
https://doi.org/10.1063/1.90945
Effect of magnesium on the aging behavior of Al-Zn-Mg-Cu/Al{sub 2}O{sub 3} metal matrix composites

Journal Article Chou, M C ; Chao, C G - Metallurgical Transactions, A

The effect of magnesium content on the aging behavior of Al-Zn-Mg-Cu alloy reinforced with alumina (Al{sub 2}O{sub 3}) was studied by using the differential scanning calorimetry (DSC) technique and hardness measurement. The magnesium contents were studied in the range from 1.23 to 2.97 wt pct. The addition of magnesium was found to increase the coherent Guinier-Preston (GP) zones in composites. The apparent formation enthalpy of GP zones of composites (0.1 V{sub f}) was 0.932 cal/g for 1.23 wt pct magnesium content and 1.375 cal/g for 2.97 wt pct magnesium content. The precipitation time to achieve the maximum hardness in themore »« less

Similar Records