Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations

Sklenička, Václav; Kuchařová, Květa; Svoboda, Milan; Kvapilová, Marie; Král, Petr; Dvořák, Jiří

doi:10.1016/j.ijpvp.2019.104000

Title: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations

Full Record
Other Related Research

Authors:: Sklenička, Václav; Kuchařová, Květa; Svoboda, Milan; Kvapilová, Marie; Král, Petr; Dvořák, Jiří

Publication Date:: 2019-12-01

Sponsoring Org.:: USDOE Office of Fossil Energy (FE), Clean Coal and Carbon Management

OSTI Identifier:: 1703579

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: International Journal of Pressure Vessels and Piping

Additional Journal Information:: Journal Name: International Journal of Pressure Vessels and Piping Journal Volume: 178 Journal Issue: C; Journal ID: ISSN 0308-0161

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Sklenička, Václav, Kuchařová, Květa, Svoboda, Milan, Kvapilová, Marie, Král, Petr, and Dvořák, Jiří. Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations.  United Kingdom: N. p., 2019. 
Web.  https://doi.org/10.1016/j.ijpvp.2019.104000.

Copy to clipboard


                    Sklenička, Václav, Kuchařová, Květa, Svoboda, Milan, Kvapilová, Marie, Král, Petr, & Dvořák, Jiří. Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations.  United Kingdom.  https://doi.org/10.1016/j.ijpvp.2019.104000

Copy to clipboard


                    Sklenička, Václav, Kuchařová, Květa, Svoboda, Milan, Kvapilová, Marie, Král, Petr, and Dvořák, Jiří. Sun .  
"Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations".  United Kingdom.  https://doi.org/10.1016/j.ijpvp.2019.104000.

Copy to clipboard


                    
@article{osti_1703579,

  title        = {Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations},

  author       = {Sklenička, Václav and Kuchařová, Květa and Svoboda, Milan and Kvapilová, Marie and Král, Petr and Dvořák, Jiří},

  abstractNote = {},

  doi          = {10.1016/j.ijpvp.2019.104000},

  journal      = {International Journal of Pressure Vessels and Piping},

  number       = C,

  volume       = 178,

  place        = {United Kingdom},

  year         = {2019},

  month        = {12}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.ijpvp.2019.104000

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Weld heat-affected zone in Ti-6Al-4V alloys. Part 1: Computer simulation of the effect of weld variables on the thermal cycles in the HAZ

Journal Article Shah, A K ; Kulkarni, S D ; Gopinathan, V ; ... - Welding Journal

The weld thermal cycles encountered in the HAZ of titanium alloys have been characterized using modified Rosenthal equations. The results are shown in the form of axonometric plots depicting the effect of two weld variables keeping the other variables fixed. Computer simulation results show that the heat input and the plate thickness are the major variables affecting the thermal cycles in the HAZ. The effects of changes in welding speed are reflecting in the variation in the heat input. The electrode radius has minimal effect and can be termed as the minor variable. Preheat or interpass temperatures have an intermediatemore »« less
THE EFFECT OF INTERNAL STRESSES DUE TO IRRADIATION GROWTH AND THERMAL CYCLING ON THE CREEP OF URANIUM, IN THE CASES OF BOTH ELASTIC AND PLASTIC BEHAVIOUR

Journal Article Blackburn, W S - Reactor Sci. and Technol., J. Nuclear Energy, Pts. A and B

Theories are developed to derive differential equations from which the effect of irradiation growth and uniform continuous thermal cycling on the creep of uranium under applied uniaxial stress may be determined when the material remains elastic. Two alternative assumptions are made of uniform deformation and of uniform internal stress in the uranium crystals. Solutions are obtained in several cases and an approximate method is presented which applies over a large range if primary creep effects are neglected. Over this range, tables are deduced from which it may be seen how the intermal stress at any temperature increases with the irradiationmore »« less
https://doi.org/10.1016/0368-3230(61)90099-4
The Role of Eta Phase Formation on the Creep Strength and Ductility of INCONEL Alloy 740 t 1023 k (750 Degrees C)

Journal Article Shingledecker, John P ; Pharr, George Mathews - Metallurgical and Materials Transactions A

INCONEL alloy 740 is an age-hardenable nickel-based superalloy proposed for advanced ultrasupercritical steam boiler applications operating at high stress and long times above 973 K (700 C), where creep will be the dominate deformation mode. During high-temperature exposure, the alloy can form eta phase platelets that many have suggested may be detrimental to creep strength and ductility. In this study, creep-rupture tests were conducted on smooth and notched bars of INCONEL alloy 740 at 1023 K (750 C) for times up to 20,000 hours. Examination of the creep-rupture life, creep ductility, failure modes, and microstructure by quantitative electron microscopy showsmore »« less
https://doi.org/10.1007/s11661-011-1013-4
Long-Term Creep-Rupture Behavior of Alloy Inconel 740/740H

Journal Article Render, Mark ; Santella, Michael L. ; Chen, Xiang ; ... - Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

To explore potential application of Ni-based alloys for power generation at the higher temperatures and pressures needed to achieve high thermal to electrical-energy conversion efficiency, an extensive creep-rupture dataset covering up to 875 °C and almost 70,000 h for Inconel 740/740H was analyzed using Larson–Miller parameter and Wilshire approaches. The results were used to assess the relative effectiveness of the two analytical methods, both in describing the experimental data and, because of the breadth of the dataset, using analyses of its shorter-time data to make creep lifetime predictions for much more extended times, which were then directly compared to themore »« less
https://doi.org/10.1007/s11661-021-06253-1
Microstructural examination of V-(Fe or Cr)-Ti alloys after thermal-creep or irradiation-creep tests

Journal Article Fukumoto, Kenichi ; Takahashi, Shigeru ; Kurtz, Richard J ; ... - Journal of Nuclear Materials, 341(1):83-89

Microstructural examination have been performed on irradiation-creep pressurized tube specimens of V-3Fe-4Ti-0.1 Si in order to understand failure and creep mechanisms.
https://doi.org/10.1016/j.jnucmat.2005.01.016

Similar Records