skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography

Authors:
; ORCiD logo; ORCiD logo; ; ; ; ;
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
1702068
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Composites. Part A, Applied Science and Manufacturing
Additional Journal Information:
Journal Name: Composites. Part A, Applied Science and Manufacturing Journal Volume: 130 Journal Issue: C; Journal ID: ISSN 1359-835X
Publisher:
Elsevier
Country of Publication:
United Kingdom
Language:
English

Citation Formats

Pei, Shenli, Wang, Kaifeng, Li, Jingjing, Li, Yang, Zeng, Danielle, Su, Xuming, Xiao, Xianghui, and Yang, Hui. Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography. United Kingdom: N. p., 2020. Web. https://doi.org/10.1016/j.compositesa.2019.105732.
Pei, Shenli, Wang, Kaifeng, Li, Jingjing, Li, Yang, Zeng, Danielle, Su, Xuming, Xiao, Xianghui, & Yang, Hui. Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography. United Kingdom. https://doi.org/10.1016/j.compositesa.2019.105732
Pei, Shenli, Wang, Kaifeng, Li, Jingjing, Li, Yang, Zeng, Danielle, Su, Xuming, Xiao, Xianghui, and Yang, Hui. Sun . "Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography". United Kingdom. https://doi.org/10.1016/j.compositesa.2019.105732.
@article{osti_1702068,
title = {Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography},
author = {Pei, Shenli and Wang, Kaifeng and Li, Jingjing and Li, Yang and Zeng, Danielle and Su, Xuming and Xiao, Xianghui and Yang, Hui},
abstractNote = {},
doi = {10.1016/j.compositesa.2019.105732},
journal = {Composites. Part A, Applied Science and Manufacturing},
number = C,
volume = 130,
place = {United Kingdom},
year = {2020},
month = {3}
}

Journal Article:
Free Publicly Available Full Text

Citation Metrics:
Cited by: 1 work
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

In-situ 3D fracture propagation of short carbon fiber reinforced polymer composites
journal, September 2019


The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
journal, September 2017


Generation of micro-scale finite element models from synchrotron X-ray CT images for multidirectional carbon fibre reinforced composites
journal, December 2016


The Halpin-Tsai equations: A review
journal, May 1976

  • Affdl, J. C. Halpin; Kardos, J. L.
  • Polymer Engineering and Science, Vol. 16, Issue 5
  • DOI: 10.1002/pen.760160512

TomoPy: a framework for the analysis of synchrotron tomographic data
journal, August 2014

  • Gürsoy, Dogˇa; De Carlo, Francesco; Xiao, Xianghui
  • Journal of Synchrotron Radiation, Vol. 21, Issue 5
  • DOI: 10.1107/S1600577514013939

The stiffness tensor for composites with curved discontinuous fibers
journal, May 2015


Phase contrast micro-tomography and morphological analysis of a short carbon fibre reinforced polyamide
journal, January 2011


Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites
journal, July 2012


Individual fibre segmentation from 3D X-ray computed tomography for characterising the fibre orientation in unidirectional composite materials
journal, June 2017


X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
journal, February 2013


Mechanical properties of carbon fiber composite octet-truss lattice structures
journal, November 2015


Micromechanical prediction of ultimate strength of transversely isotropic fibrous composites
journal, May 2001


Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites
journal, October 2008


Fiber tracking: principles and strategies - a technical review
journal, January 2002

  • Mori, Susumu; van Zijl, Peter C. M.
  • NMR in Biomedicine, Vol. 15, Issue 7-8
  • DOI: 10.1002/nbm.781

Spatiotemporal characterization of 3D fracture behavior of carbon-fiber-reinforced polymer composites
journal, November 2018


The characterisation of cracks and voids in two-dimensional carbon-carbon composites
journal, January 1993


Quantifying fibre reorientation during axial compression of a composite through time-lapse X-ray imaging and individual fibre tracking
journal, November 2018


Theory of mechanical properties of fibre-strengthened materials: I. Elastic behaviour
journal, September 1964


Numerical reconstruction of graphite/epoxy composite microstructure based on sub-micron resolution X-ray computed tomography
journal, December 2014


The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites
journal, November 1987

  • Advani, Suresh G.; Tucker, Charles L.
  • Journal of Rheology, Vol. 31, Issue 8
  • DOI: 10.1122/1.549945

A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage
journal, February 2013


3D composite reinforcement meso F.E. analyses based on X-ray computed tomography
journal, November 2015


Evaluation of Computed Tomography Data from Fibre Reinforced Polymers to Determine Fibre Length Distribution
journal, July 2011

  • Salaberger, D.; Kannappan, K. A.; Kastner, J.
  • International Polymer Processing, Vol. 26, Issue 3
  • DOI: 10.3139/217.2441

Microstructural analysis of short glass fiber reinforced thermoplastics based on x-ray micro-computed tomography
journal, October 2019


X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites
journal, November 2005


Insights from in-situ X-ray computed tomography during axial impregnation of unidirectional fiber beds
journal, April 2018


Strength of discontinuous reinforced composites: I. Fiber reinforced composites
journal, May 1978

  • Halpin, J. C.; Karoos, J. L.
  • Polymer Engineering and Science, Vol. 18, Issue 6
  • DOI: 10.1002/pen.760180612

X-ray tomography image-based reconstruction of microstructural finite element mesh models for heterogeneous materials
journal, February 2013


X-ray computed tomography of polymer composites
journal, March 2018


A Threshold Selection Method from Gray-Level Histograms
journal, January 1979


Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results
journal, September 2012


High resolution tomographic imaging and modelling of notch tip damage in a laminated composite
journal, September 2010


Fiber Length and Orientation in Long-Fiber Injection-Molded Thermoplastics — Part I: Modeling of Microstructure and Elastic Properties
journal, January 2008

  • Nguyen, Ba Nghiep; Bapanapalli, Satish K.; Holbery, James D.
  • Journal of Composite Materials, Vol. 42, Issue 10
  • DOI: 10.1177/0021998308088606