Effect of ε-Al3Ni phase on mechanical properties of Al–Si–Cu–Mg–Ni alloys at elevated temperature

Zuo, Lijie; Ye, Bing; Feng, Jian; Zhang, Huixia; Kong, Xiangyang; Jiang, Haiyan

doi:10.1016/j.msea.2019.138794

Title: Effect of ε-Al3Ni phase on mechanical properties of Al–Si–Cu–Mg–Ni alloys at elevated temperature

Journal Article · 31 December 2019 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI: https://doi.org/10.1016/j.msea.2019.138794 · OSTI ID:1693838

Zuo, Lijie; Ye, Bing; Feng, Jian; Zhang, Huixia; Kong, Xiangyang; Jiang, Haiyan

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI ID:: 1693838

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: C Vol. 772; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (29)

Phases Formation and Evolution at Elevated Temperatures of Al–12Si–3.8Cu–2Ni–1Mg Alloy Zuo, Lijie; Ye, Bing; Feng, Jian Advanced Engineering Materials, Vol. 19, Issue 3 https://doi.org/10.1002/adem.201600623	journal	November 2016
Deformation mechanisms in h.c.p. metals at elevated temperatures—I. Creep behavior of magnesium Vagarali, Suresh S.; Langdon, Terence G. Acta Metallurgica, Vol. 29, Issue 12 https://doi.org/10.1016/0001-6160(81)90034-1	journal	December 1981
Deformation mechanisms in h.c.p. metals at elevated temperatures—II. Creep behavior of a Mg-0.8% Al solid solution alloy Vagarali, Suresh S.; Langdon, Terence G. Acta Metallurgica, Vol. 30, Issue 6 https://doi.org/10.1016/0001-6160(82)90009-8	journal	June 1982
Tensile and elastic properties of deformed heterogeneous aluminum alloys at room and elevated temperatures Eskin, Dm. G.; Toropova, L. S. Materials Science and Engineering: A, Vol. 183, Issue 1-2 https://doi.org/10.1016/0921-5093(94)90913-X	journal	June 1994
Plastic flow and fracture of a particulate metal matrix composite Kiser, M. T.; Zok, F. W.; Wilkinson, D. S. Acta Materialia, Vol. 44, Issue 9 https://doi.org/10.1016/1359-6454(96)00028-6	journal	September 1996
The influence of the reinforcing particle shape and interface strength on the fracture behavior of a metal matrix composite Romanova, V. A.; Balokhonov, R. R.; Schmauder, S. Acta Materialia, Vol. 57, Issue 1 https://doi.org/10.1016/j.actamat.2008.08.046	journal	January 2009
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys Asghar, Z.; Requena, G.; Boller, E. Acta Materialia, Vol. 59, Issue 16 https://doi.org/10.1016/j.actamat.2011.07.006	journal	September 2011
3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy Dezecot, Sebastien; Maurel, Vincent; Buffiere, Jean-Yves Acta Materialia, Vol. 123 https://doi.org/10.1016/j.actamat.2016.10.028	journal	January 2017
Microstructure-based modeling of crack growth in particle reinforced composites Ayyar, A.; Chawla, N. Composites Science and Technology, Vol. 66, Issue 13 https://doi.org/10.1016/j.compscitech.2006.01.007	journal	October 2006
Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads Huter, Patrik; Oberfrank, Stefan; Grün, Florian International Journal of Fatigue, Vol. 88 https://doi.org/10.1016/j.ijfatigue.2016.02.017	journal	July 2016
Mechanical properties of intermetallic phases in multi-component Al–Si alloys using nanoindentation Chen, C. -L.; Richter, A.; Thomson, R. C. Intermetallics, Vol. 17, Issue 8 https://doi.org/10.1016/j.intermet.2009.02.003	journal	August 2009
Effects of Nd on microstructure and mechanical properties of cast Al-Si-Cu-Ni-Mg piston alloys Han, Lina; Sui, Yudong; Wang, Qudong Journal of Alloys and Compounds, Vol. 695 https://doi.org/10.1016/j.jallcom.2016.10.300	journal	February 2017
Effect of δ-Al3CuNi phase and thermal exposure on microstructure and mechanical properties of Al-Si-Cu-Ni alloys Zuo, Lijie; Ye, Bing; Feng, Jian Journal of Alloys and Compounds, Vol. 791 https://doi.org/10.1016/j.jallcom.2019.03.412	journal	June 2019
Microstructure, tensile properties and creep behavior of Al-12Si-3.5Cu-2Ni-0.8Mg alloy produced by different casting technologies Zuo, Lijie; Ye, Bing; Feng, Jian Journal of Materials Science & Technology, Vol. 34, Issue 7 https://doi.org/10.1016/j.jmst.2017.06.011	journal	July 2018
A novel heat-resistant Al–Si–Cu–Ni–Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons Hu, Kaiqi; Xu, Qingfei; Ma, Xia Journal of Materials Science & Technology, Vol. 35, Issue 3 https://doi.org/10.1016/j.jmst.2018.09.051	journal	March 2019
Simultaneously increasing the elevated-temperature tensile strength and plasticity of in situ nano-sized TiCx/Al-Cu-Mg composites Wang, Lei; Qiu, Feng; Zhao, Qinglong Materials Characterization, Vol. 125 https://doi.org/10.1016/j.matchar.2017.01.013	journal	March 2017
Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions Yang, Yang; Yu, Kuilong; Li, Yunguo Materials & Design, Vol. 33 https://doi.org/10.1016/j.matdes.2011.06.058	journal	January 2012
Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al–Si piston alloys Li, Yunguo; Yang, Yang; Wu, Yuying Materials Science and Engineering: A, Vol. 527, Issue 26 https://doi.org/10.1016/j.msea.2010.07.073	journal	October 2010
The effects of manganese on the Τ-phase and creep resistance in Al–Si–Cu–Mg–Ni alloys Farkoosh, A. R.; Pekguleryuz, M. Materials Science and Engineering: A, Vol. 582 https://doi.org/10.1016/j.msea.2013.06.030	journal	October 2013
Three dimensional post-mortem study of damage after compression of cast Al–Si alloys Asghar, Z.; Requena, G. Materials Science and Engineering: A, Vol. 591 https://doi.org/10.1016/j.msea.2013.10.067	journal	January 2014
Effect of Q-Al 5 Cu 2 Mg 8 Si 6 phase on mechanical properties of Al-Si-Cu-Mg alloy at elevated temperature Zuo, Lijie; Ye, Bing; Feng, Jian Materials Science and Engineering: A, Vol. 693 https://doi.org/10.1016/j.msea.2017.03.087	journal	May 2017
Effects of Ni content on low cycle fatigue and mechanical properties of Al-12Si-0.9Cu-0.8Mg-xNi at 350 °C Feng, Jian; Ye, Bing; Zuo, Lijie Materials Science and Engineering: A, Vol. 706 https://doi.org/10.1016/j.msea.2017.08.114	journal	October 2017
Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy Bugelnig, Katrin; Sket, Federico; Germann, Holger Materials Science and Engineering: A, Vol. 709 https://doi.org/10.1016/j.msea.2017.10.035	journal	January 2018
Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength Li, Guangjin; Liao, Hengcheng; Suo, Xiaojing Materials Science and Engineering: A, Vol. 709 https://doi.org/10.1016/j.msea.2017.10.049	journal	January 2018
Elevated re-aging of a piston aluminium alloy and effect on the microstructure and mechanical properties Tian, Lusha; Guo, Yongchun; Li, Jianping Materials Science and Engineering: A, Vol. 738 https://doi.org/10.1016/j.msea.2018.09.078	journal	December 2018
Development of alloys with high strength at elevated temperatures by tuning the bimodal microstructure in the Al–Cu–Ni eutectic system Tiwary, C. S.; Kashyap, S.; Chattopadhyay, K. Scripta Materialia, Vol. 93 https://doi.org/10.1016/j.scriptamat.2014.08.020	journal	December 2014
In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography Dezecot, Sebastien; Buffiere, Jean-Yves; Koster, Alain Scripta Materialia, Vol. 113 https://doi.org/10.1016/j.scriptamat.2015.11.017	journal	March 2016
Instrumented indentation probing of laser surface-refined cast Al alloy Nayak, S.; Riester, Laura; Dahotre, Narendra B. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.202	journal	January 2004
Criteria for developing castable, creep-resistant aluminum-based alloys – A review Knipling, Keith E.; Dunand, David C.; Seidman, David N. Zeitschrift für Metallkunde, Vol. 97, Issue 3 https://doi.org/10.3139/146.101249	journal	March 2006

Similar Records

Effects of Thermal Exposure on the Microstructure and Mechanical Properties of Al-Si-Cu-Ni-Mg-Gd Alloy

Journal Article · 2019 · Journal of Materials Engineering and Performance · OSTI ID:22970970

Sui, Yudong; Han, Lina; Wang, Qudong

Effect of T6 heat treatment on the microstructural and mechanical properties of Al–Si–Cu–Mg alloys

Journal Article · 2016 · AIP Conference Proceedings · OSTI ID:22606671

Patel, Dhruv; Davda, Chintan; Keshvani, M. J.; +1 more

Effect of delayed aging on mechanical properties of an Al-Cu-Mg alloy

Journal Article · 2000 · Journal of Materials Engineering and Performance · OSTI ID:20023156

Ravindranathan, S P; Kashyap, K T; Kumar, S R; +2 more

Title: Effect of ε-Al3Ni phase on mechanical properties of Al–Si–Cu–Mg–Ni alloys at elevated temperature

Citation Formats

References (29)

Similar Records

Related Subjects