Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718

Witzen, Wyatt A.; Polonsky, Andrew T.; Pollock, Tresa M.; Beyerlein, Irene J.

doi:10.1016/j.ijplas.2020.102709

Title: Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718

Authors:: Witzen, Wyatt A.; Polonsky, Andrew T.; Pollock, Tresa M.; Beyerlein, Irene J.

Publication Date:: Sat Aug 01 00:00:00 EDT 2020

Sponsoring Org.:: USDOE

OSTI Identifier:: 1693817

Grant/Contract Number:: N00014-16–1-2982; 4000156470

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: International Journal of Plasticity

Additional Journal Information:: Journal Name: International Journal of Plasticity Journal Volume: 131 Journal Issue: C; Journal ID: ISSN 0749-6419

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Witzen, Wyatt A., Polonsky, Andrew T., Pollock, Tresa M., and Beyerlein, Irene J. Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718.  United States: N. p., 2020. 
Web.  doi:10.1016/j.ijplas.2020.102709.

Copy to clipboard


                    Witzen, Wyatt A., Polonsky, Andrew T., Pollock, Tresa M., & Beyerlein, Irene J. Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718.  United States.  https://doi.org/10.1016/j.ijplas.2020.102709

Copy to clipboard


                    Witzen, Wyatt A., Polonsky, Andrew T., Pollock, Tresa M., and Beyerlein, Irene J. Sat .  
"Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718".  United States.  https://doi.org/10.1016/j.ijplas.2020.102709.

Copy to clipboard


                    
@article{osti_1693817,

  title        = {Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718},

  author       = {Witzen, Wyatt A. and Polonsky, Andrew T. and Pollock, Tresa M. and Beyerlein, Irene J.},

  abstractNote = {},

  doi          = {10.1016/j.ijplas.2020.102709},

  journal      = {International Journal of Plasticity},

  number       = C,

  volume       = 131,

  place        = {United States},

  year         = {Sat Aug 01 00:00:00 EDT 2020},

  month        = {Sat Aug 01 00:00:00 EDT 2020}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.ijplas.2020.102709

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

3D EBSD characterization of deformation structures in commercial purity aluminum
journal, November 2010

Lin, F. X.; Godfrey, A.; Jensen, D. Juul
Materials Characterization, Vol. 61, Issue 11
DOI: 10.1016/j.matchar.2010.07.013

Size effects in miniaturized polycrystalline FCC samples: Strengthening versus weakening
journal, November 2006

Geers, M. G. D.; Brekelmans, W. A. M.; Janssen, P. J. M.
International Journal of Solids and Structures, Vol. 43, Issue 24
DOI: 10.1016/j.ijsolstr.2006.05.009

A crystal plasticity FE model for deformation with twin nucleation in magnesium alloys
journal, April 2015

Cheng, Jiahao; Ghosh, Somnath
International Journal of Plasticity, Vol. 67
DOI: 10.1016/j.ijplas.2014.10.005

Modeling of additive manufacturing processes for metals: Challenges and opportunities
journal, August 2017

Francois, M. M.; Sun, A.; King, W. E.
Current Opinion in Solid State and Materials Science, Vol. 21, Issue 4
DOI: 10.1016/j.cossms.2016.12.001

Experimental lower bounds on geometrically necessary dislocation density
journal, August 2010

Kysar, J. W.; Saito, Y.; Oztop, M. S.
International Journal of Plasticity, Vol. 26, Issue 8
DOI: 10.1016/j.ijplas.2010.03.009

Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing
journal, December 2018

Kapoor, Kartik; Yoo, Yung Suk Jeremy; Book, Todd A.
Journal of the Mechanics and Physics of Solids, Vol. 121
DOI: 10.1016/j.jmps.2018.07.025

A reformulation of mechanism-based strain gradient plasticity
journal, November 2005

Yun, G.; Hwang, K. C.; Huang, Y.
Philosophical Magazine, Vol. 85, Issue 33-35
DOI: 10.1080/14786430500363338

Additive manufacturing of metallic components – Process, structure and properties
journal, March 2018

DebRoy, T.; Wei, H. L.; Zuback, J. S.
Progress in Materials Science, Vol. 92
DOI: 10.1016/j.pmatsci.2017.10.001

Five-Parameter Grain Boundary Analysis by 3D EBSD of an Ultra Fine Grained CuZr Alloy Processed by Equal Channel Angular Pressing
journal, January 2011

Khorashadizadeh, A.; Raabe, D.; Zaefferer, S.
Advanced Engineering Materials, Vol. 13, Issue 4
DOI: 10.1002/adem.201000259

Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations
journal, March 2014

Pokharel, Reeju; Lind, Jonathan; Kanjarla, Anand K.
Annual Review of Condensed Matter Physics, Vol. 5, Issue 1
DOI: 10.1146/annurev-conmatphys-031113-133846

Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM)
journal, February 2016

Sridharan, Niyanth; Norfolk, Mark; Babu, Sudarsanam Suresh
Metallurgical and Materials Transactions A, Vol. 47, Issue 5
DOI: 10.1007/s11661-016-3354-5

Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures
journal, May 2017

Bonatti, Colin; Mohr, Dirk
International Journal of Plasticity, Vol. 92
DOI: 10.1016/j.ijplas.2017.02.003

The effect of length scale on the determination of geometrically necessary dislocations via EBSD continuum dislocation microscopy
journal, May 2016

Ruggles, T. J.; Rampton, T. M.; Khosravani, A.
Ultramicroscopy, Vol. 164
DOI: 10.1016/j.ultramic.2016.03.003

Nanoindentation based properties of Inconel 718 at elevated temperatures: A comparison of conventional versus additively manufactured samples
journal, September 2019

Wang, Hao; Dhiman, Abhijeet; Ostergaard, Halsey E.
International Journal of Plasticity, Vol. 120
DOI: 10.1016/j.ijplas.2019.04.018

Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals
journal, January 2003

El-Dasher, B. S.; Adams, B. L.; Rollett, A. D.
Scripta Materialia, Vol. 48, Issue 2
DOI: 10.1016/S1359-6462(02)00340-8

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
journal, February 2010

Roters, F.; Eisenlohr, P.; Hantcherli, L.
Acta Materialia, Vol. 58, Issue 4
DOI: 10.1016/j.actamat.2009.10.058

Additive manufacturing of metals
journal, September 2016

Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric
Acta Materialia, Vol. 117
DOI: 10.1016/j.actamat.2016.07.019

Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation
journal, November 2002

Evers, L. P.; Parks, D. M.; Brekelmans, W. A. M.
Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 11
DOI: 10.1016/S0022-5096(02)00032-7

Strain gradient plasticity: Theory and experiment
journal, February 1994

Fleck, N. A.; Muller, G. M.; Ashby, M. F.
Acta Metallurgica et Materialia, Vol. 42, Issue 2
DOI: 10.1016/0956-7151(94)90502-9

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Groeber, Michael A.; Jackson, Michael A.
Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1
DOI: 10.1186/2193-9772-3-5

Additive manufacturing of fatigue resistant materials: Challenges and opportunities
journal, May 2017

Yadollahi, Aref; Shamsaei, Nima
International Journal of Fatigue, Vol. 98
DOI: 10.1016/j.ijfatigue.2017.01.001

Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution
journal, June 2015

Subedi, Samikshya; Pokharel, Reeju; Rollett, Anthony D.
Materials Science and Engineering: A, Vol. 638
DOI: 10.1016/j.msea.2015.04.051

Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction
journal, June 2008

Pantleon, W.
Scripta Materialia, Vol. 58, Issue 11
DOI: 10.1016/j.scriptamat.2008.01.050

Probabilistic fracture of Ti–6Al–4V made through additive layer manufacturing
journal, March 2016

Tancogne-Dejean, Thomas; Roth, Christian C.; Woy, Udisien
International Journal of Plasticity, Vol. 78
DOI: 10.1016/j.ijplas.2015.09.007

Estimation of dislocation density from precession electron diffraction data using the Nye tensor
journal, June 2015

Leff, A. C.; Weinberger, C. R.; Taheri, M. L.
Ultramicroscopy, Vol. 153, p. 9-21
DOI: 10.1016/j.ultramic.2015.02.002

Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
journal, June 2010

Baufeld, Bernd; Biest, Omer Van der; Gault, Rosemary
Materials & Design, Vol. 31
DOI: 10.1016/j.matdes.2009.11.032

A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing
journal, October 2009

Roberts, I. A.; Wang, C. J.; Esterlein, R.
International Journal of Machine Tools and Manufacture, Vol. 49, Issue 12-13
DOI: 10.1016/j.ijmachtools.2009.07.004

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
journal, April 2010

Calcagnotto, Marion; Ponge, Dirk; Demir, Eralp
Materials Science and Engineering: A, Vol. 527, Issue 10-11
DOI: 10.1016/j.msea.2010.01.004

The metallurgy and processing science of metal additive manufacturing
journal, March 2016

Sames, W. J.; List, F. A.; Pannala, S.
International Materials Reviews, Vol. 61, Issue 5
DOI: 10.1080/09506608.2015.1116649

A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
journal, December 2017

Ghorbanpour, Saeede; Zecevic, Milovan; Kumar, Anil
International Journal of Plasticity, Vol. 99
DOI: 10.1016/j.ijplas.2017.09.006

Some geometrical relations in dislocated crystals
journal, March 1953

Nye, J. F.
Acta Metallurgica, Vol. 1, Issue 2
DOI: 10.1016/0001-6160(53)90054-6

An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes
journal, January 2017

Jiang, Jun; Hooper, Paul; Li, Nan
Procedia Engineering, Vol. 207
DOI: 10.1016/j.proeng.2017.10.1050

Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope
journal, January 2014

Trimby, Patrick W.; Cao, Yang; Chen, Zibin
Acta Materialia, Vol. 62
DOI: 10.1016/j.actamat.2013.09.026

Metal Additive Manufacturing: A Review
journal, April 2014

Frazier, William E.
Journal of Materials Engineering and Performance, Vol. 23, Issue 6
DOI: 10.1007/s11665-014-0958-z

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
journal, December 2015

King, W. E.; Anderson, A. T.; Ferencz, R. M.
Applied Physics Reviews, Vol. 2, Issue 4
DOI: 10.1063/1.4937809

Geometrically necessary dislocation density measurements associated with different angles of indentations
journal, March 2014

Dahlberg, C. F. O.; Saito, Y.; Öztop, M. S.
International Journal of Plasticity, Vol. 54
DOI: 10.1016/j.ijplas.2013.08.008

High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
journal, April 2018

Shamsujjoha, Md.; Agnew, Sean R.; Fitz-Gerald, James M.
Metallurgical and Materials Transactions A, Vol. 49, Issue 7
DOI: 10.1007/s11661-018-4607-2

Multi-scale crystal plasticity finite element model approach to modeling nickel-based superalloys
journal, October 2013

Keshavarz, Shahriyar; Ghosh, Somnath
Acta Materialia, Vol. 61, Issue 17
DOI: 10.1016/j.actamat.2013.07.038

Creep resistance of CMSX-3 nickel base superalloy single crystals
journal, January 1992

Pollock, T. M.; Argon, A. S.
Acta Metallurgica et Materialia, Vol. 40, Issue 1
DOI: 10.1016/0956-7151(92)90195-K

A 3D analysis of the onset of slip activity in relation to the degree of micro-texture in Ti–6Al–4V
journal, December 2019

Hémery, S.; Naït-Ali, A.; Guéguen, M.
Acta Materialia, Vol. 181
DOI: 10.1016/j.actamat.2019.09.028

Consistent determination of geometrically necessary dislocation density from simulations and experiments
journal, October 2018

Das, Suchandrima; Hofmann, Felix; Tarleton, Edmund
International Journal of Plasticity, Vol. 109
DOI: 10.1016/j.ijplas.2018.05.001

Multiscale crystal plasticity modeling based on geometrically necessary crystal defects and simulation on fine-graining for polycrystal
journal, June 2007

Aoyagi, Y.; Shizawa, K.
International Journal of Plasticity, Vol. 23, Issue 6
DOI: 10.1016/j.ijplas.2006.10.009

Multiscale modeling of polycrystalline nickel-based superalloys accounting for subgrain microstructures
journal, December 2016

Ghosh, Somnath; Weber, George; Keshavarz, Shahriyar
Mechanics Research Communications, Vol. 78
DOI: 10.1016/j.mechrescom.2015.12.001

Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography
journal, January 2009

Demir, Eralp; Raabe, Dierk; Zaafarani, Nader
Acta Materialia, Vol. 57, Issue 2
DOI: 10.1016/j.actamat.2008.09.039

A new TriBeam system for three-dimensional multimodal materials analysis
journal, February 2012

Echlin, McLean P.; Mottura, Alessandro; Torbet, Christopher J.
Review of Scientific Instruments, Vol. 83, Issue 2
DOI: 10.1063/1.3680111

Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels
journal, September 2019

Li, Zan; Voisin, Thomas; McKeown, Joseph T.
International Journal of Plasticity, Vol. 120
DOI: 10.1016/j.ijplas.2019.05.009

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
journal, August 2014

Knezevic, Marko; Drach, Borys; Ardeljan, Milan
Computer Methods in Applied Mechanics and Engineering, Vol. 277
DOI: 10.1016/j.cma.2014.05.003

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density
journal, March 1999

Arsenlis, A.; Parks, D. M.
Acta Materialia, Vol. 47, Issue 5
DOI: 10.1016/S1359-6454(99)00020-8

Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion
journal, October 2019

Ferreri, Nicholas C.; Ghorbanpour, Saeede; Bhowmik, Shubhrodev
International Journal of Plasticity, Vol. 121
DOI: 10.1016/j.ijplas.2019.06.002

An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations
journal, October 2019

Pokharel, Reeju; Patra, Anirban; Brown, Donald W.
International Journal of Plasticity, Vol. 121
DOI: 10.1016/j.ijplas.2019.06.005

Micro-hardness of annealed and work-hardened copper polycrystals
journal, February 1996

Poole, W. J.; Ashby, M. F.; Fleck, N. A.
Scripta Materialia, Vol. 34, Issue 4
DOI: 10.1016/1359-6462(95)00524-2

Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains
journal, January 2001

Meissonnier, F. T.; Busso, E. P.; O'Dowd, N. P.
International Journal of Plasticity, Vol. 17, Issue 4
DOI: 10.1016/S0749-6419(00)00064-4

The deformation of plastically non-homogeneous materials
journal, February 1970

Ashby, M. F.
The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 21, Issue 170
DOI: 10.1080/14786437008238426

Assessment of geometrically necessary dislocation levels derived by 3D EBSD
journal, October 2015

Konijnenberg, P. J.; Zaefferer, S.; Raabe, D.
Acta Materialia, Vol. 99
DOI: 10.1016/j.actamat.2015.06.051

Hybrid dislocation dynamics based strain hardening constitutive model
journal, October 2013

Bertin, N.; Capolungo, L.; Beyerlein, I. J.
International Journal of Plasticity, Vol. 49
DOI: 10.1016/j.ijplas.2013.03.003

Multiscale Modeling of Microstructure-Property Relationships of Polycrystalline Metals during Thermo-Mechanical Deformation
journal, January 2018

Knezevic, Marko; Beyerlein, Irene J.
Advanced Engineering Materials, Vol. 20, Issue 4
DOI: 10.1002/adem.201700956

Three-dimensional Analysis and Reconstruction of Additively Manufactured Materials in the Cloud-Based BisQue Infrastructure
journal, March 2019

Polonsky, Andrew T.; Lang, Christian A.; Kvilekval, Kristian G.
Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 1
DOI: 10.1007/s40192-019-00126-7

Estimating geometric dislocation densities in polycrystalline materials from orientation imaging microscopy
journal, March 2010

Man, Chi-Sing; Gao, Xiang; Godefroy, Scott
International Journal of Plasticity, Vol. 26, Issue 3
DOI: 10.1016/j.ijplas.2009.08.002

Structural representation of additively manufactured 316L austenitic stainless steel
journal, July 2019

Bronkhorst, C. A.; Mayeur, J. R.; Livescu, V.
International Journal of Plasticity, Vol. 118
DOI: 10.1016/j.ijplas.2019.01.012

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
journal, January 2012

Murr, Lawrence E.; Gaytan, Sara M.; Ramirez, Diana A.
Journal of Materials Science & Technology, Vol. 28, Issue 1
DOI: 10.1016/S1005-0302(12)60016-4

A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy
journal, January 1996

Busso, Esteban P.; McClintock, Frank A.
International Journal of Plasticity, Vol. 12, Issue 1
DOI: 10.1016/S0749-6419(95)00041-0

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets
journal, June 2015

Lenthe, William C.; Echlin, McLean P.; Trenkle, Andreas
Journal of Applied Crystallography, Vol. 48, Issue 4
DOI: 10.1107/S1600576715009231

On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations
journal, May 2006

Ma, A.; Roters, F.; Raabe, D.
Acta Materialia, Vol. 54, Issue 8
DOI: 10.1016/j.actamat.2006.01.004

Metal Additive Manufacturing: A Review of Mechanical Properties
journal, July 2016

Lewandowski, John J.; Seifi, Mohsen
Annual Review of Materials Research, Vol. 46, Issue 1
DOI: 10.1146/annurev-matsci-070115-032024

Crystal plasticity FE modeling of Ti alloys for a range of strain-rates. Part I: A unified constitutive model and flow rule
journal, December 2016

Shahba, Ahmad; Ghosh, Somnath
International Journal of Plasticity, Vol. 87
DOI: 10.1016/j.ijplas.2016.09.002

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary
journal, May 2009

Ohashi, Tetsuya; Barabash, R. I.; Pang, J. W. L.
International Journal of Plasticity, Vol. 25, Issue 5
DOI: 10.1016/j.ijplas.2008.04.009

Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
journal, June 2014

Reuber, C.; Eisenlohr, P.; Roters, F.
Acta Materialia, Vol. 71
DOI: 10.1016/j.actamat.2014.03.012

Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
journal, September 2018

Polonsky, Andrew T.; Echlin, McLean P.; Lenthe, William C.
Materials Characterization, Vol. 143
DOI: 10.1016/j.matchar.2018.02.020

Similar Records in DOE PAGES and OSTI.GOV collections:

Cyclic-loading-induced accumulation of geometrically necessary dislocations near grain boundaries in a an ni-based superalloy.

Journal Article Huang, E W ; Barabash, R I ; Ice, G I ; ... - JOM

In this study, the fatigue-induced microstructure produced in a nickel-based polycrystalline superalloy that was subjected to cyclic loading was characterized by polychromatic x-ray microdiffraction (PXM) together with in-situ neutron diffraction and transmission-electron microscopy (TEM). In-situ neutron-diffraction measurements reveal two distinct stages of the fatigue damage: cyclic hardening followed by cyclic softening. Three-dimensional spatially resolved PXM micro-Laue measurements find an increase in the density of geometrically necessary dislocations near the grain boundaries, which is accompanied by lattice rotations and grain subdivisions. The PXM results are in agreement with the in-situ neutron-diffraction and TEM results.
https://doi.org/10.1007/s11837-009-0181-9
Cyclic-loading-induced Accumulation of the Geometrically Necessary Dislocations Near the Grain Boundaries of the Ni-Based Superalloy

Journal Article Huang, E-Wen ; Barabash, Rozaliya ; Ice, Gene E ; ... - Journal of Metals

In this study, a nickel-based polycrystalline superalloy is subjected to cyclic loading. The fatigue-induced microstructure is characterized by novel polychromatic X-ray microdiffraction (PXM) together with in-situ neutron diffraction and TEM. In-situ neutron strain measurements reveal two distinct stages of the fatigue damage. Three-dimensional (3D) spatially-resolved PXM micro-Laue measurements demonstrate the development of local texture and formation of geometrically necessary dislocations near the grain boundaries, which is accompanied by lattice rotations and grain subdivisions. The PXM results are in agreement with the in-situ neutron diffraction and TEM results.
https://doi.org/10.1007/s11837-009-0181-9
Cyclic-loading-induced Accumulation of Geometrically Necessary Dislocations Near Grain Boundaries in an Ni-based Superalloy

Journal Article Huang, E-Wen ; Barabash, Rozaliya I ; Ice, Gene E ; ... - JOM

In this study, the fatigue-induced microstructure produced in a nickel-based polycrystalline superalloy that was subjected to cyclic loading was characterized by polychromatic x-ray microdiffraction (PXM) together with in-situ neutron diffraction and transmission-electron microscopy (TEM). In-situ neutron-diffraction measurements reveal two distinct stages of the fatigue damage: cyclic hardening followed by cyclic softening. Three-dimensional spatially resolved PXM micro-Laue measurements find an increase in the density of geometrically necessary dislocations near the grain boundaries, which is accompanied by lattice rotations and grain subdivisions. The PXM results are in agreement with the in-situ neutron-diffraction and TEM results.
https://doi.org/10.1007/s11837-009-0181-9
Subgrain geometrically necessary dislocation density mapping in spalled Ta in three dimensions

Journal Article Witzen, Wyatt A. ; Echlin, McLean P. ; Charpagne, Marie-Agathe ; ... - Acta Materialia
https://doi.org/10.1016/j.actamat.2022.118366
Microstructure-property gradients in Ni-based superalloy (Inconel 738) additively manufactured via electron beam powder bed fusion

Journal Article Lim, Bryan ; Chen, Hansheng ; Chen, Zibin ; ... - Additive Manufacturing
https://doi.org/10.1016/j.addma.2021.102121

Similar Records

Title: Three-dimensional maps of geometrically necessary dislocation densities in additively manufactured Ni-based superalloy IN718

Citation Formats

3D EBSD characterization of deformation structures in commercial purity aluminum journal, November 2010

Size effects in miniaturized polycrystalline FCC samples: Strengthening versus weakening journal, November 2006

A crystal plasticity FE model for deformation with twin nucleation in magnesium alloys journal, April 2015

Modeling of additive manufacturing processes for metals: Challenges and opportunities journal, August 2017

Experimental lower bounds on geometrically necessary dislocation density journal, August 2010

Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing journal, December 2018

A reformulation of mechanism-based strain gradient plasticity journal, November 2005

Additive manufacturing of metallic components – Process, structure and properties journal, March 2018

Five-Parameter Grain Boundary Analysis by 3D EBSD of an Ultra Fine Grained CuZr Alloy Processed by Equal Channel Angular Pressing journal, January 2011

Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations journal, March 2014

Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM) journal, February 2016

Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures journal, May 2017

The effect of length scale on the determination of geometrically necessary dislocations via EBSD continuum dislocation microscopy journal, May 2016

Nanoindentation based properties of Inconel 718 at elevated temperatures: A comparison of conventional versus additively manufactured samples journal, September 2019

Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals journal, January 2003

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications journal, February 2010

Additive manufacturing of metals journal, September 2016

Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation journal, November 2002

Strain gradient plasticity: Theory and experiment journal, February 1994

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D journal, April 2014

Additive manufacturing of fatigue resistant materials: Challenges and opportunities journal, May 2017

Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution journal, June 2015

Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction journal, June 2008

Probabilistic fracture of Ti–6Al–4V made through additive layer manufacturing journal, March 2016

Estimation of dislocation density from precession electron diffraction data using the Nye tensor journal, June 2015

Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties journal, June 2010

A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing journal, October 2009

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD journal, April 2010

The metallurgy and processing science of metal additive manufacturing journal, March 2016

A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718 journal, December 2017

Some geometrical relations in dislocated crystals journal, March 1953

An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes journal, January 2017

Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope journal, January 2014

Metal Additive Manufacturing: A Review journal, April 2014

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges journal, December 2015

Geometrically necessary dislocation density measurements associated with different angles of indentations journal, March 2014

High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained journal, April 2018

Multi-scale crystal plasticity finite element model approach to modeling nickel-based superalloys journal, October 2013

Creep resistance of CMSX-3 nickel base superalloy single crystals journal, January 1992

A 3D analysis of the onset of slip activity in relation to the degree of micro-texture in Ti–6Al–4V journal, December 2019

Consistent determination of geometrically necessary dislocation density from simulations and experiments journal, October 2018

Multiscale crystal plasticity modeling based on geometrically necessary crystal defects and simulation on fine-graining for polycrystal journal, June 2007

Multiscale modeling of polycrystalline nickel-based superalloys accounting for subgrain microstructures journal, December 2016

Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography journal, January 2009

A new TriBeam system for three-dimensional multimodal materials analysis journal, February 2012

Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels journal, September 2019

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models journal, August 2014

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density journal, March 1999

Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion journal, October 2019

An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations journal, October 2019

Micro-hardness of annealed and work-hardened copper polycrystals journal, February 1996

Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains journal, January 2001

The deformation of plastically non-homogeneous materials journal, February 1970

Assessment of geometrically necessary dislocation levels derived by 3D EBSD journal, October 2015

Hybrid dislocation dynamics based strain hardening constitutive model journal, October 2013

Multiscale Modeling of Microstructure-Property Relationships of Polycrystalline Metals during Thermo-Mechanical Deformation journal, January 2018

Three-dimensional Analysis and Reconstruction of Additively Manufactured Materials in the Cloud-Based BisQue Infrastructure journal, March 2019

Estimating geometric dislocation densities in polycrystalline materials from orientation imaging microscopy journal, March 2010

Structural representation of additively manufactured 316L austenitic stainless steel journal, July 2019

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies journal, January 2012

A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy journal, January 1996

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets journal, June 2015

On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations journal, May 2006

Metal Additive Manufacturing: A Review of Mechanical Properties journal, July 2016

Crystal plasticity FE modeling of Ti alloys for a range of strain-rates. Part I: A unified constitutive model and flow rule journal, December 2016

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary journal, May 2009

Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments journal, June 2014

Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718 journal, September 2018

3D EBSD characterization of deformation structures in commercial purity aluminum
journal, November 2010

Size effects in miniaturized polycrystalline FCC samples: Strengthening versus weakening
journal, November 2006

A crystal plasticity FE model for deformation with twin nucleation in magnesium alloys
journal, April 2015

Modeling of additive manufacturing processes for metals: Challenges and opportunities
journal, August 2017

Experimental lower bounds on geometrically necessary dislocation density
journal, August 2010

Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing
journal, December 2018

A reformulation of mechanism-based strain gradient plasticity
journal, November 2005

Additive manufacturing of metallic components – Process, structure and properties
journal, March 2018

Five-Parameter Grain Boundary Analysis by 3D EBSD of an Ultra Fine Grained CuZr Alloy Processed by Equal Channel Angular Pressing
journal, January 2011

Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations
journal, March 2014

Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM)
journal, February 2016

Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures
journal, May 2017

The effect of length scale on the determination of geometrically necessary dislocations via EBSD continuum dislocation microscopy
journal, May 2016

Nanoindentation based properties of Inconel 718 at elevated temperatures: A comparison of conventional versus additively manufactured samples
journal, September 2019

Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals
journal, January 2003

Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
journal, February 2010

Additive manufacturing of metals
journal, September 2016

Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation
journal, November 2002

Strain gradient plasticity: Theory and experiment
journal, February 1994

DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014

Additive manufacturing of fatigue resistant materials: Challenges and opportunities
journal, May 2017

Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution
journal, June 2015

Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction
journal, June 2008

Probabilistic fracture of Ti–6Al–4V made through additive layer manufacturing
journal, March 2016

Estimation of dislocation density from precession electron diffraction data using the Nye tensor
journal, June 2015

Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
journal, June 2010

A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing
journal, October 2009

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
journal, April 2010

The metallurgy and processing science of metal additive manufacturing
journal, March 2016

A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
journal, December 2017

Some geometrical relations in dislocated crystals
journal, March 1953

An integrated method for net-shape manufacturing components combining 3D additive manufacturing and compressive forming processes
journal, January 2017

Characterizing deformed ultrafine-grained and nanocrystalline materials using transmission Kikuchi diffraction in a scanning electron microscope
journal, January 2014

Metal Additive Manufacturing: A Review
journal, April 2014

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
journal, December 2015

Geometrically necessary dislocation density measurements associated with different angles of indentations
journal, March 2014

High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
journal, April 2018

Multi-scale crystal plasticity finite element model approach to modeling nickel-based superalloys
journal, October 2013

Creep resistance of CMSX-3 nickel base superalloy single crystals
journal, January 1992

A 3D analysis of the onset of slip activity in relation to the degree of micro-texture in Ti–6Al–4V
journal, December 2019

Consistent determination of geometrically necessary dislocation density from simulations and experiments
journal, October 2018

Multiscale crystal plasticity modeling based on geometrically necessary crystal defects and simulation on fine-graining for polycrystal
journal, June 2007

Multiscale modeling of polycrystalline nickel-based superalloys accounting for subgrain microstructures
journal, December 2016

Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography
journal, January 2009

A new TriBeam system for three-dimensional multimodal materials analysis
journal, February 2012

Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels
journal, September 2019

Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
journal, August 2014

Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density
journal, March 1999

Effects of build orientation and heat treatment on the evolution of microstructure and mechanical properties of alloy Mar-M-509 fabricated via laser powder bed fusion
journal, October 2019

An analysis of phase stresses in additively manufactured 304L stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations
journal, October 2019

Micro-hardness of annealed and work-hardened copper polycrystals
journal, February 1996

Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains
journal, January 2001

The deformation of plastically non-homogeneous materials
journal, February 1970

Assessment of geometrically necessary dislocation levels derived by 3D EBSD
journal, October 2015

Hybrid dislocation dynamics based strain hardening constitutive model
journal, October 2013

Multiscale Modeling of Microstructure-Property Relationships of Polycrystalline Metals during Thermo-Mechanical Deformation
journal, January 2018

Three-dimensional Analysis and Reconstruction of Additively Manufactured Materials in the Cloud-Based BisQue Infrastructure
journal, March 2019

Estimating geometric dislocation densities in polycrystalline materials from orientation imaging microscopy
journal, March 2010

Structural representation of additively manufactured 316L austenitic stainless steel
journal, July 2019

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
journal, January 2012

A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy
journal, January 1996

Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets
journal, June 2015

On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations
journal, May 2006

Metal Additive Manufacturing: A Review of Mechanical Properties
journal, July 2016

Crystal plasticity FE modeling of Ti alloys for a range of strain-rates. Part I: A unified constitutive model and flow rule
journal, December 2016

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary
journal, May 2009

Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
journal, June 2014

Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
journal, September 2018