A new approach for fracture prediction considering general anisotropy of metal sheets

Park, Namsu; Stoughton, Thomas B.; Yoon, Jeong Whan

doi:10.1016/j.ijplas.2019.08.011

Title: A new approach for fracture prediction considering general anisotropy of metal sheets

Journal Article · 01 January 2020 · International Journal of Plasticity

DOI: https://doi.org/10.1016/j.ijplas.2019.08.011 · OSTI ID:1693612

Park, Namsu; Stoughton, Thomas B.; Yoon, Jeong Whan

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI ID:: 1693612

Journal Information:: International Journal of Plasticity, Journal Name: International Journal of Plasticity Journal Issue: C Vol. 124; ISSN 0749-6419

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (70)

Influence of voids on shear band instabilities under plane strain conditions Tvergaard, Viggo International Journal of Fracture, Vol. 17, Issue 4 https://doi.org/10.1007/BF00036191	journal	August 1981
Application of extended Mohr–Coulomb criterion to ductile fracture Bai, Yuanli; Wierzbicki, Tomasz International Journal of Fracture, Vol. 161, Issue 1 https://doi.org/10.1007/s10704-009-9422-8	journal	November 2009
Anisotropy effect on the fracture model of DP980 sheets considering the loading path Park, N.; Huh, H.; Nam, J. B. International Journal of Automotive Technology, Vol. 16, Issue 1 https://doi.org/10.1007/s12239-015-0008-3	journal	February 2015
Analysis of the cup-cone fracture in a round tensile bar Tvergaard, V.; Needleman, A. Acta Metallurgica, Vol. 32, Issue 1 https://doi.org/10.1016/0001-6160(84)90213-X	journal	January 1984
Limit strains in the processes of stretch-forming sheet metal Marciniak, Zdzislaw; Kuczyński, Kazimierz International Journal of Mechanical Sciences, Vol. 9, Issue 9 https://doi.org/10.1016/0020-7403(67)90066-5	journal	September 1967
Fracture prediction in plastic deformation processes Clift, S. E.; Hartley, P.; Sturgess, C. E. N. International Journal of Mechanical Sciences, Vol. 32, Issue 1 https://doi.org/10.1016/0020-7403(90)90148-C	journal	January 1990
Plastic instability under plane stress Swift, H. W. Journal of the Mechanics and Physics of Solids, Vol. 1, Issue 1 https://doi.org/10.1016/0022-5096(52)90002-1	journal	October 1952
On discontinuous plastic states, with special reference to localized necking in thin sheets Hill, R. Journal of the Mechanics and Physics of Solids, Vol. 1, Issue 1 https://doi.org/10.1016/0022-5096(52)90003-3	journal	October 1952
Localized necking in thin sheets Stören, S.; Rice, J. R. Journal of the Mechanics and Physics of Solids, Vol. 23, Issue 6 https://doi.org/10.1016/0022-5096(75)90004-6	journal	December 1975
Criteria for ductile fracture and their applications Oyane, Moriya; Sato, Teisuke; Okimoto, Kunio Journal of Mechanical Working Technology, Vol. 4, Issue 1 https://doi.org/10.1016/0378-3804(80)90006-6	journal	April 1980
Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity Kim, Jinkook; Gao, Xiaosheng; Srivatsan, Tirumalai S. Engineering Fracture Mechanics, Vol. 71, Issue 3 https://doi.org/10.1016/S0013-7944(03)00114-0	journal	February 2004
A general forming limit criterion for sheet metal forming Stoughton, Thomas B. International Journal of Mechanical Sciences, Vol. 42, Issue 1 https://doi.org/10.1016/S0020-7403(98)00113-1	journal	January 2000
Approximate yield criteria for anisotropic porous ductile sheet metals Liao, K. -C.; Pan, J.; Tang, S. C. Mechanics of Materials, Vol. 26, Issue 4 https://doi.org/10.1016/S0167-6636(97)00033-1	journal	December 1997
A non-associated flow rule for sheet metal forming Stoughton, Thomas B. International Journal of Plasticity, Vol. 18, Issue 5-6 https://doi.org/10.1016/S0749-6419(01)00053-5	journal	October 2002
Plane stress yield function for aluminum alloy sheets—part 1: theory Barlat, F.; Brem, J. C.; Yoon, J. W. International Journal of Plasticity, Vol. 19, Issue 9 https://doi.org/10.1016/S0749-6419(02)00019-0	journal	September 2003
Plastic potentials for anisotropic porous solids Benzerga, Ahmed Amine; Besson, Jacques European Journal of Mechanics - A/Solids, Vol. 20, Issue 3 https://doi.org/10.1016/S0997-7538(01)01147-0	journal	May 2001
Anisotropic ductile fracture Benzerga, A. A.; Besson, J.; Pineau, A. Acta Materialia, Vol. 52, Issue 15 https://doi.org/10.1016/j.actamat.2004.06.019	journal	September 2004
Anisotropic ductile fracture Benzerga, A. A.; Besson, J.; Pineau, A. Acta Materialia, Vol. 52, Issue 15 https://doi.org/10.1016/j.actamat.2004.06.020	journal	September 2004
The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming Chen, Zhiying; Dong, Xianghuai Computational Materials Science, Vol. 44, Issue 3 https://doi.org/10.1016/j.commatsci.2008.07.020	journal	January 2009
Constitutive modeling of void shearing effect in ductile fracture of porous materials Xue, Liang Engineering Fracture Mechanics, Vol. 75, Issue 11 https://doi.org/10.1016/j.engfracmech.2007.07.022	journal	July 2008
Ductile fracture initiation and propagation modeling using damage plasticity theory Xue, Liang; Wierzbicki, Tomasz Engineering Fracture Mechanics, Vol. 75, Issue 11 https://doi.org/10.1016/j.engfracmech.2007.08.012	journal	July 2008
Partially coupled anisotropic fracture model for aluminum sheets Beese, Allison M.; Luo, Meng; Li, Yaning Engineering Fracture Mechanics, Vol. 77, Issue 7 https://doi.org/10.1016/j.engfracmech.2010.02.024	journal	May 2010
Ductile shear failure or plug failure of spot welds modelled by modified Gurson model Nielsen, Kim Lau; Tvergaard, Viggo Engineering Fracture Mechanics, Vol. 77, Issue 7 https://doi.org/10.1016/j.engfracmech.2010.02.031	journal	May 2010
Anisotropic Hosford–Coulomb fracture initiation model: Theory and application Gu, Gongyao; Mohr, Dirk Engineering Fracture Mechanics, Vol. 147 https://doi.org/10.1016/j.engfracmech.2015.08.004	journal	October 2015
Modification of the Gurson Model for shear failure Nahshon, K.; Hutchinson, J. W. European Journal of Mechanics - A/Solids, Vol. 27, Issue 1 https://doi.org/10.1016/j.euromechsol.2007.08.002	journal	January 2008
On fracture locus in the equivalent strain and stress triaxiality space Bao, Yingbin; Wierzbicki, Tomasz International Journal of Mechanical Sciences, Vol. 46, Issue 1 https://doi.org/10.1016/j.ijmecsci.2004.02.006	journal	January 2004
Calibration and evaluation of seven fracture models Wierzbicki, Tomasz; Bao, Yingbin; Lee, Young-Woong International Journal of Mechanical Sciences, Vol. 47, Issue 4-5 https://doi.org/10.1016/j.ijmecsci.2005.03.003	journal	April 2005
Sheet metal formability analysis for anisotropic materials under non-proportional loading Stoughton, Thomas B.; Yoon, Jeong Whan International Journal of Mechanical Sciences, Vol. 47, Issue 12 https://doi.org/10.1016/j.ijmecsci.2005.06.005	journal	December 2005
Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model Jia, Yueqian; Bai, Yuanli International Journal of Mechanical Sciences, Vol. 115-116 https://doi.org/10.1016/j.ijmecsci.2016.07.022	journal	September 2016
Compensation for process-dependent effects in the determination of localized necking limits Min, Junying; Stoughton, Thomas B.; Carsley, John E. International Journal of Mechanical Sciences, Vol. 117 https://doi.org/10.1016/j.ijmecsci.2016.08.008	journal	October 2016
Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming Mu, Lei; Zang, Yong; Wang, Yuan International Journal of Mechanical Sciences, Vol. 141 https://doi.org/10.1016/j.ijmecsci.2018.04.025	journal	June 2018
Determining the strain to fracture for simple shear for a wide range of sheet metals Roth, Christian C.; Mohr, Dirk International Journal of Mechanical Sciences, Vol. 149 https://doi.org/10.1016/j.ijmecsci.2018.10.007	journal	December 2018
Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD Stoughton, Thomas B.; Zhu, Xinhai International Journal of Plasticity, Vol. 20, Issue 8-9 https://doi.org/10.1016/j.ijplas.2003.11.004	journal	August 2004
Linear transfomation-based anisotropic yield functions Barlat, F.; Aretz, H.; Yoon, J. W. International Journal of Plasticity, Vol. 21, Issue 5 https://doi.org/10.1016/j.ijplas.2004.06.004	journal	May 2005
A ductile damage criterion at various stress triaxialities Brünig, Michael; Chyra, Oliver; Albrecht, Daniel International Journal of Plasticity, Vol. 24, Issue 10 https://doi.org/10.1016/j.ijplas.2007.12.001	journal	October 2008
A new approach for failure criterion for sheet metals Stoughton, Thomas B.; Yoon, Jeong Whan International Journal of Plasticity, Vol. 27, Issue 3 https://doi.org/10.1016/j.ijplas.2010.07.004	journal	March 2011
Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part II: Ductile fracture Luo, Meng; Dunand, Matthieu; Mohr, Dirk International Journal of Plasticity, Vol. 32-33 https://doi.org/10.1016/j.ijplas.2011.11.001	journal	May 2012
A new approach for ductile fracture prediction on Al 2024-T351 alloy Khan, Akhtar S.; Liu, Haowen International Journal of Plasticity, Vol. 35 https://doi.org/10.1016/j.ijplas.2012.01.003	journal	August 2012
Strain rate and temperature dependent fracture criteria for isotropic and anisotropic metals Khan, Akhtar S.; Liu, Haowen International Journal of Plasticity, Vol. 37 https://doi.org/10.1016/j.ijplas.2012.01.012	journal	October 2012
Anisotropic failure modes of high-strength aluminium alloy under various stress states Fourmeau, M.; Børvik, T.; Benallal, A. International Journal of Plasticity, Vol. 48 https://doi.org/10.1016/j.ijplas.2013.02.004	journal	September 2013
Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality Lou, Yanshan; Yoon, Jeong Whan; Huh, Hoon International Journal of Plasticity, Vol. 54 https://doi.org/10.1016/j.ijplas.2013.08.006	journal	March 2014
Asymmetric yield function based on the stress invariants for pressure sensitive metals Yoon, Jeong Whan; Lou, Yanshan; Yoon, Jonghun International Journal of Plasticity, Vol. 56 https://doi.org/10.1016/j.ijplas.2013.11.008	journal	May 2014
Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling Roth, Christian C.; Mohr, Dirk International Journal of Plasticity, Vol. 56 https://doi.org/10.1016/j.ijplas.2014.01.003	journal	May 2014
An extended Modified Maximum Force Criterion for the prediction of localized necking under non-proportional loading Manopulo, Niko; Hora, Pavel; Peters, Philip International Journal of Plasticity, Vol. 75 https://doi.org/10.1016/j.ijplas.2015.02.003	journal	December 2015
Fracture-based forming limit criteria for anisotropic materials in sheet metal forming Park, Namsu; Huh, Hoon; Lim, Sung Jun International Journal of Plasticity, Vol. 96 https://doi.org/10.1016/j.ijplas.2016.04.014	journal	September 2017
A nonlinear model for ductile damage accumulation under multiaxial non-proportional loading conditions Cortese, Luca; Nalli, Filippo; Rossi, Marco International Journal of Plasticity, Vol. 85 https://doi.org/10.1016/j.ijplas.2016.07.003	journal	October 2016
Anisotropic ductile fracture criterion based on linear transformation Lou, Yanshan; Yoon, Jeong Whan International Journal of Plasticity, Vol. 93 https://doi.org/10.1016/j.ijplas.2017.04.008	journal	June 2017
Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion Lou, Yanshan; Yoon, Jeong Whan International Journal of Plasticity, Vol. 101 https://doi.org/10.1016/j.ijplas.2017.10.012	journal	February 2018
Anisotropic fracture of advanced high strength steel sheets: Experiment and theory Li, Shuhui; He, Ji; Gu, Bin International Journal of Plasticity, Vol. 103 https://doi.org/10.1016/j.ijplas.2018.01.003	journal	April 2018
Modeling of crack growth in ductile solids: a three-dimensional analysis Kim, Jinkook; Gao, Xiaosheng; Srivatsan, T. S. International Journal of Solids and Structures, Vol. 40, Issue 26 https://doi.org/10.1016/j.ijsolstr.2003.08.022	journal	December 2003
On ductile fracture initiation toughness: Effects of void volume fraction, void shape and void distribution Gao, Xiaosheng; Wang, Tianhong; Kim, Jinkook International Journal of Solids and Structures, Vol. 42, Issue 18-19 https://doi.org/10.1016/j.ijsolstr.2005.02.028	journal	September 2005
Rupture mechanisms in combined tension and shear—Experiments Barsoum, Imad; Faleskog, Jonas International Journal of Solids and Structures, Vol. 44, Issue 6 https://doi.org/10.1016/j.ijsolstr.2006.09.031	journal	March 2007
Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading Xue, Liang International Journal of Solids and Structures, Vol. 44, Issue 16 https://doi.org/10.1016/j.ijsolstr.2006.12.026	journal	August 2007
Hybrid experimental–numerical analysis of basic ductile fracture experiments for sheet metals Dunand, Matthieu; Mohr, Dirk International Journal of Solids and Structures, Vol. 47, Issue 9 https://doi.org/10.1016/j.ijsolstr.2009.12.011	journal	May 2010
New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals Lou, Yanshan; Huh, Hoon; Lim, Sungjun International Journal of Solids and Structures, Vol. 49, Issue 25 https://doi.org/10.1016/j.ijsolstr.2012.02.016	journal	December 2012
Micromechanically-motivated phenomenological Hosford–Coulomb model for predicting ductile fracture initiation at low stress triaxialities Mohr, Dirk; Marcadet, Stephane J. International Journal of Solids and Structures, Vol. 67-68 https://doi.org/10.1016/j.ijsolstr.2015.02.024	journal	August 2015
Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao–Wierzbicki results revisited Papasidero, Jessica; Doquet, Véronique; Mohr, Dirk International Journal of Solids and Structures, Vol. 69-70 https://doi.org/10.1016/j.ijsolstr.2015.05.006	journal	September 2015
On the path-dependence of the fracture locus in ductile materials: Experiments Basu, Shamik; Benzerga, A. Amine International Journal of Solids and Structures, Vol. 71 https://doi.org/10.1016/j.ijsolstr.2015.06.003	journal	October 2015
Influence of loading path on ductile fracture of tensile specimens made from aluminium alloys Bryhni Dæhli, Lars Edvard; Børvik, Tore; Hopperstad, Odd Sture International Journal of Solids and Structures, Vol. 88-89 https://doi.org/10.1016/j.ijsolstr.2016.03.028	journal	June 2016
Ductile failure of aluminum alloy tubes under combined torsion and tension Scales, Martin; Tardif, Nicolas; Kyriakides, Stelios International Journal of Solids and Structures, Vol. 97-98 https://doi.org/10.1016/j.ijsolstr.2016.07.038	journal	October 2016
Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals Lou, Yanshan; Chen, Lin; Clausmeyer, Till International Journal of Solids and Structures, Vol. 112 https://doi.org/10.1016/j.ijsolstr.2016.11.034	journal	May 2017
Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain Park, Namsu; Huh, Hoon; Yoon, Jeong Whan International Journal of Solids and Structures, Vol. 151 https://doi.org/10.1016/j.ijsolstr.2018.01.009	journal	October 2018
Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion Ko, Y. K.; Lee, J. S.; Huh, H. Journal of Materials Processing Technology, Vol. 187-188 https://doi.org/10.1016/j.jmatprotec.2006.11.071	journal	June 2007
Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model Kami, Abdolvahed; Dariani, Bijan Mollaei; Sadough Vanini, Ali Journal of Materials Processing Technology, Vol. 216 https://doi.org/10.1016/j.jmatprotec.2014.10.017	journal	February 2015
Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities Dunand, Matthieu; Mohr, Dirk Journal of the Mechanics and Physics of Solids, Vol. 66 https://doi.org/10.1016/j.jmps.2014.01.008	journal	May 2014
Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy Šebek, František; Petruška, Jindřich; Kubík, Petr Materials & Design, Vol. 137 https://doi.org/10.1016/j.matdes.2017.09.064	journal	January 2018
Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates Park, Namsu; Park, Moonsu; Kwon, Junbeom Science and Technology of Welding and Joining, Vol. 23, Issue 1 https://doi.org/10.1080/13621718.2017.1306015	journal	March 2017
A Unified Bifurcation Analysis of Sheet Metal Forming Limits Zhu, Xinhai; Weinmann, Klaus; Chandra, Abhijit Journal of Engineering Materials and Technology, Vol. 123, Issue 3 https://doi.org/10.1115/1.1370397	journal	February 2001
Ductile Fracture in Axisymmetric Extrusion and Drawing—Part 2: Workability in Extrusion and Drawing Oh, S. I.; Chen, C. C.; Kobayashi, S. Journal of Engineering for Industry, Vol. 101, Issue 1 https://doi.org/10.1115/1.3439471	journal	February 1979
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media Gurson, A. L. Journal of Engineering Materials and Technology, Vol. 99, Issue 1 https://doi.org/10.1115/1.3443401	journal	January 1977

Similar Records

CrachFEM - A Comprehensive Approach For The Prediction Of Sheet Metal Failure

Journal Article · 2007 · AIP Conference Proceedings · OSTI ID:21057383

Dell, Harry; Gese, Helmut; Oberhofer, Gernot

New Angles on Standard Force Fields: Toward a General Approach for Treating Atomic-Level Anisotropy

Journal Article · 2018 · Journal of Chemical Theory and Computation · OSTI ID:1417681

Van Vleet, Mary J.; Misquitta, Alston J.; Schmidt, J. R.

A new phase field fracture model for brittle materials that accounts for elastic anisotropy

Journal Article · 2020 · Computer Methods in Applied Mechanics and Engineering · OSTI ID:1566212

Zhang, Shuaifang; Jiang, Wen; Tonks, Michael R.

Title: A new approach for fracture prediction considering general anisotropy of metal sheets

Citation Formats

References (70)

Similar Records

Related Subjects