Surface wettability and pool boiling Critical Heat Flux of Accident Tolerant Fuel cladding-FeCrAl alloys

Ali, Amir F.; Gorton, Jacob P.; Brown, Nicholas R.; Terrani, Kurt A.; Jensen, Colby B.; Lee, Youho; Blandford, Edward D.

doi:10.1016/j.nucengdes.2018.08.024

Title: Surface wettability and pool boiling Critical Heat Flux of Accident Tolerant Fuel cladding-FeCrAl alloys

Journal Article · 31 October 2018 · Nuclear Engineering and Design

DOI: https://doi.org/10.1016/j.nucengdes.2018.08.024 · OSTI ID:1682390

Ali, Amir F.; Gorton, Jacob P.; Brown, Nicholas R.; Terrani, Kurt A.; Jensen, Colby B.; Lee, Youho; Blandford, Edward D.

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 1682390

Journal Information:: Nuclear Engineering and Design, Journal Name: Nuclear Engineering and Design Journal Issue: C Vol. 338; ISSN 0029-5493

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (31)

Compositive effects of orientation and contact angle on critical heat flux in pool boiling of water Liao, Liang; Bao, Ran; Liu, ZhenHua Heat and Mass Transfer, Vol. 44, Issue 12 https://doi.org/10.1007/s00231-008-0384-6	journal	March 2008
A prediction model of subcooled water flow boiling CHF for pressure in the range 0.1–20 MPa Katto, Y. International Journal of Heat and Mass Transfer, Vol. 35, Issue 5 https://doi.org/10.1016/0017-9310(92)90172-O	journal	May 1992
Prediction of departure from nucleate boiling for an axially non-uniform heat flux distribution Tong, L. S. Journal of Nuclear Energy, Vol. 21, Issue 3 https://doi.org/10.1016/S0022-3107(67)90054-8	journal	January 1967
Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors George, Nathan Michael; Terrani, Kurt; Powers, Jeff Annals of Nuclear Energy, Vol. 75 https://doi.org/10.1016/j.anucene.2014.09.005	journal	January 2015
Optimization and parallelization of the thermal–hydraulic subchannel code CTF for high-fidelity multi-physics applications Salko, Robert K.; Schmidt, Rodney C.; Avramova, Maria N. Annals of Nuclear Energy, Vol. 84 https://doi.org/10.1016/j.anucene.2014.11.005	journal	October 2015
The potential impact of enhanced accident tolerant cladding materials on reactivity initiated accidents in light water reactors Brown, Nicholas R.; Wysocki, Aaron J.; Terrani, Kurt A. Annals of Nuclear Energy, Vol. 99 https://doi.org/10.1016/j.anucene.2016.09.033	journal	January 2017
Potential impact of accident tolerant fuel cladding critical heat flux characteristics on the high temperature phase of reactivity initiated accidents Liu, Maolong; Brown, Nicholas R.; Terrani, Kurt A. Annals of Nuclear Energy, Vol. 110 https://doi.org/10.1016/j.anucene.2017.06.016	journal	December 2017
Effect of interlaced wettability on horizontal copper cylinders in nucleate pool boiling Hsu, Chin-Chi; Lee, Meng-Ru; Wu, Chun-Hui Applied Thermal Engineering, Vol. 112 https://doi.org/10.1016/j.applthermaleng.2016.10.176	journal	February 2017
A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces Jo, HangJin; Ahn, Ho Seon; Kang, SoonHo International Journal of Heat and Mass Transfer, Vol. 54, Issue 25-26 https://doi.org/10.1016/j.ijheatmasstransfer.2011.06.001	journal	December 2011
Surface wettability effects on critical heat flux of boiling heat transfer using nanoparticle coatings Hsu, Chin-Chi; Chen, Ping-Hei International Journal of Heat and Mass Transfer, Vol. 55, Issue 13-14 https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.003	journal	June 2012
Critical heat flux prediction model for low quality flow boiling of water in vertical circular tube Pan, Jie; Li, Ran; Yang, Dong International Journal of Heat and Mass Transfer, Vol. 99 https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.072	journal	August 2016
Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability Kim, Jinsub; Jun, Seongchul; Laksnarain, Ram International Journal of Heat and Mass Transfer, Vol. 101 https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.067	journal	October 2016
Enhanced pool boiling critical heat flux with a FeCrAl layer fabricated by DC sputtering Seo, Gwang Hyeok; Jeun, Gyoodong; Kim, Sung Joong International Journal of Heat and Mass Transfer, Vol. 102 https://doi.org/10.1016/j.ijheatmasstransfer.2016.06.077	journal	November 2016
Enhancement of critical heat flux and superheat through controlled wettability of cuprous-oxide fractal-like nanotextured surfaces in pool boiling Jo, Hong Seok; An, Seongpil; Park, Hyun Goo International Journal of Heat and Mass Transfer, Vol. 107 https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.029	journal	April 2017
Pool boiling critical heat flux (CHF) – Part 1: Review of mechanisms, models, and correlations Liang, Gangtao; Mudawar, Issam International Journal of Heat and Mass Transfer, Vol. 117 https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.134	journal	February 2018
Effect of inclination on saturation boiling of PF-5060 dielectric liquid on 80- and 137-μm thick copper micro-porous surfaces Ali, Amir F.; El-Genk, Mohamed S. International Journal of Thermal Sciences, Vol. 53 https://doi.org/10.1016/j.ijthermalsci.2011.11.004	journal	March 2012
Formation and stability of oxide layer in FeCrAl fuel cladding material under high-temperature steam Pan, Dong; Zhang, Ruiqian; Wang, Hui Journal of Alloys and Compounds, Vol. 684 https://doi.org/10.1016/j.jallcom.2016.05.145	journal	November 2016
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding Terrani, K. A.; Zinkle, S. J.; Snead, L. L. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.06.041	journal	May 2014
Accident tolerant fuels for LWRs: A perspective Zinkle, S. J.; Terrani, K. A.; Gehin, J. C. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.12.005	journal	May 2014
Screening of advanced cladding materials and UN–U3Si5 fuel Brown, Nicholas R.; Todosow, Michael; Cuadra, Arantxa Journal of Nuclear Materials, Vol. 462 https://doi.org/10.1016/j.jnucmat.2015.03.016	journal	July 2015
Radiation tolerance of neutron-irradiated model Fe–Cr–Al alloys Field, Kevin G.; Hu, Xunxiang; Littrell, Kenneth C. Journal of Nuclear Materials, Vol. 465 https://doi.org/10.1016/j.jnucmat.2015.06.023	journal	October 2015
Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors Yamamoto, Y.; Pint, B. A.; Terrani, K. A. Journal of Nuclear Materials, Vol. 467 https://doi.org/10.1016/j.jnucmat.2015.10.019	journal	December 2015
Uniform corrosion of FeCrAl alloys in LWR coolant environments Terrani, K. A.; Pint, B. A.; Kim, Y. -J. Journal of Nuclear Materials, Vol. 479 https://doi.org/10.1016/j.jnucmat.2016.06.047	journal	October 2016
Irradiation-enhanced α′ precipitation in model FeCrAl alloys Edmondson, P. D.; Briggs, S. A. Scripta Materialia, Vol. 116 https://doi.org/10.1016/j.scriptamat.2016.02.002	journal	April 2016
Resistance Of Solid Surfaces To Wetting By Water Wenzel, Robert N. Industrial & Engineering Chemistry, Vol. 28, Issue 8, p. 988-994 https://doi.org/10.1021/ie50320a024	journal	August 1936
Line Energy and the Relation between Advancing, Receding, and Young Contact Angles Tadmor, Rafael Langmuir, Vol. 20, Issue 18 https://doi.org/10.1021/la049410h	journal	August 2004
Separate effects of surface roughness, wettability, and porosity on the boiling critical heat flux O'Hanley, Harry; Coyle, Carolyn; Buongiorno, Jacopo Applied Physics Letters, Vol. 103, Issue 2 https://doi.org/10.1063/1.4813450	journal	July 2013
A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation Kandlikar, Satish G. Journal of Heat Transfer, Vol. 123, Issue 6 https://doi.org/10.1115/1.1409265	journal	April 2001
An Investigation of the Effect of Inclination on Critical Heat Flux of PF-5060 Dielectric Liquid on Microporous Copper Surfaces Ali, Amir F.; El-Genk, Mohamed S. ASME 2013 International Mechanical Engineering Congress and Exposition, Volume 8C: Heat Transfer and Thermal Engineering https://doi.org/10.1115/IMECE2013-65503	conference	April 2014
Effects of Surface Roughness and Inclination Angle on Nucleate Boiling of PF-5060 Dielectric Liquid on Copper El-Genk, Mohamed S.; Suszko, Arthur; Ali, Amir F. ASME 2013 International Mechanical Engineering Congress and Exposition, Volume 8C: Heat Transfer and Thermal Engineering https://doi.org/10.1115/IMECE2013-65512	conference	April 2014
KAERI’s Development of LWR Accident-Tolerant Fuel Koo, Yang-Hyun; Yang, Jae-Ho; Park, Jeong-Yong Nuclear Technology, Vol. 186, Issue 2 https://doi.org/10.13182/NT13-89	journal	May 2014

Similar Records

Pool boiling critical heat flux studies of accident tolerant fuel cladding materials

Journal Article · 2020 · Nuclear Engineering and Design · OSTI ID:1850529

Yeom, Hwasung; Gutierrez, Emilio; Jo, HangJin; +4 more

Comparison of steady and transient flow boiling critical heat flux for FeCrAl accident tolerant fuel cladding alloy, Zircaloy, and Inconel

Journal Article · 2019 · International Journal of Heat and Mass Transfer · OSTI ID:1632324

Lee, Soon; Liu, Maolong; Brown, Nicholas; +5 more

Hydrothermal corrosion of 2nd generation FeCrAl alloys for accident tolerant fuel cladding

Journal Article · 2020 · Journal of Nuclear Materials · OSTI ID:1619855

Raiman, Stephen S.; Field, Kevin G.; Rebak, Raul B.; +2 more

Title: Surface wettability and pool boiling Critical Heat Flux of Accident Tolerant Fuel cladding-FeCrAl alloys

Citation Formats

References (31)

Similar Records

Related Subjects