skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: In situ observations of jetting in the divergent rebound regime for high-velocity metallic microparticle impact

Abstract

Metallic bonding of certain materials can be achieved via high-velocity impact, and this type of bonding is often linked to an intense extrusion of material from the impact site, known as jetting. We present in-situ observations of hydrodynamic jetting and ejection of matter from high-velocity metallic microparticle impacts that still result in rebound of the particle. While the occurrence of jetting has been linked to permanent particle deposition in prior studies, the present findings reveal that any bonds that may form upon jetting can be rebroken by particle rebound in some circumstances. Finally, we further present asymmetric occurrences of jetting associated with localized delays in particle detachment followed by rotation during particle rebound, which may speak to transient bond formation at jetting sites.

Authors:
ORCiD logo [1]; ORCiD logo [1];  [1]; ORCiD logo [1]
  1. Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)
Publication Date:
Research Org.:
Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES). Materials Sciences & Engineering Division; USDOE
OSTI Identifier:
1668721
Alternate Identifier(s):
OSTI ID: 1669151
Grant/Contract Number:  
SC0018091
Resource Type:
Accepted Manuscript
Journal Name:
Applied Physics Letters
Additional Journal Information:
Journal Volume: 117; Journal Issue: 13; Journal ID: ISSN 0003-6951
Publisher:
American Institute of Physics (AIP)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE

Citation Formats

Sun, Yuchen, Veysset, David, Nelson, Keith A., and Schuh, Christopher A.. In situ observations of jetting in the divergent rebound regime for high-velocity metallic microparticle impact. United States: N. p., 2020. Web. https://doi.org/10.1063/5.0018681.
Sun, Yuchen, Veysset, David, Nelson, Keith A., & Schuh, Christopher A.. In situ observations of jetting in the divergent rebound regime for high-velocity metallic microparticle impact. United States. https://doi.org/10.1063/5.0018681
Sun, Yuchen, Veysset, David, Nelson, Keith A., and Schuh, Christopher A.. Wed . "In situ observations of jetting in the divergent rebound regime for high-velocity metallic microparticle impact". United States. https://doi.org/10.1063/5.0018681. https://www.osti.gov/servlets/purl/1668721.
@article{osti_1668721,
title = {In situ observations of jetting in the divergent rebound regime for high-velocity metallic microparticle impact},
author = {Sun, Yuchen and Veysset, David and Nelson, Keith A. and Schuh, Christopher A.},
abstractNote = {Metallic bonding of certain materials can be achieved via high-velocity impact, and this type of bonding is often linked to an intense extrusion of material from the impact site, known as jetting. We present in-situ observations of hydrodynamic jetting and ejection of matter from high-velocity metallic microparticle impacts that still result in rebound of the particle. While the occurrence of jetting has been linked to permanent particle deposition in prior studies, the present findings reveal that any bonds that may form upon jetting can be rebroken by particle rebound in some circumstances. Finally, we further present asymmetric occurrences of jetting associated with localized delays in particle detachment followed by rotation during particle rebound, which may speak to transient bond formation at jetting sites.},
doi = {10.1063/5.0018681},
journal = {Applied Physics Letters},
number = 13,
volume = 117,
place = {United States},
year = {2020},
month = {9}
}

Works referenced in this record:

Dynamics and extreme plasticity of metallic microparticles in supersonic collisions
journal, July 2017


Microstructural bonding features of cold sprayed face centered cubic metals
journal, October 2004

  • Borchers, C.; Gärtner, F.; Stoltenhoff, T.
  • Journal of Applied Physics, Vol. 96, Issue 8
  • DOI: 10.1063/1.1789278

High-velocity micro-particle impact on gelatin and synthetic hydrogel
journal, October 2018

  • Veysset, David; Kooi, Steven E.; Мaznev, A. A.
  • Journal of the Mechanical Behavior of Biomedical Materials, Vol. 86
  • DOI: 10.1016/j.jmbbm.2018.06.016

Joining of Cast ZE41A Mg to Wrought 6061 Al by the Cold Spray Process and Friction Stir Welding
journal, September 2015

  • Champagne, Victor Kenneth; West, Michael K.; Reza Rokni, M.
  • Journal of Thermal Spray Technology, Vol. 25, Issue 1-2
  • DOI: 10.1007/s11666-015-0301-8

Melt-driven erosion in microparticle impact
journal, November 2018

  • Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A.
  • Nature Communications, Vol. 9, Issue 1
  • DOI: 10.1038/s41467-018-07509-y

Interface melding in cold spray titanium particle impact
journal, January 2014


Adiabatic shear instability is not necessary for adhesion in cold spray
journal, October 2018


Comment on ‘Adiabatic shear instability is not necessary for adhesion in cold spray’
journal, March 2019


High strain rate deformation of layered nanocomposites
journal, January 2012

  • Lee, Jae-Hwang; Veysset, David; Singer, Jonathan P.
  • Nature Communications, Vol. 3, Issue 1
  • DOI: 10.1038/ncomms2166

Molecular dependencies of dynamic stiffening and strengthening through high strain rate microparticle impact of polyurethane and polyurea elastomers
journal, August 2019

  • Sun, Yuchen; Wu, You-Chi Mason; Veysset, David
  • Applied Physics Letters, Vol. 115, Issue 9
  • DOI: 10.1063/1.5111964

Mechanical Property Mapping of Cold Sprayed Ti Splats and Coatings
journal, September 2010

  • Goldbaum, Dina; Chromik, Richard R.; Yue, Stephen
  • Journal of Thermal Spray Technology, Vol. 20, Issue 3
  • DOI: 10.1007/s11666-010-9546-4

Microstructural and macroscopic properties of cold sprayed copper coatings
journal, June 2003

  • Borchers, C.; Gärtner, F.; Stoltenhoff, T.
  • Journal of Applied Physics, Vol. 93, Issue 12
  • DOI: 10.1063/1.1573740

The Transition From Rebound to Bonding in High-Velocity Metallic Microparticle Impacts: Jetting-Associated Power-Law Divergence
journal, May 2020

  • Sun, Yuchen; Veysset, David; Nelson, Keith A.
  • Journal of Applied Mechanics, Vol. 87, Issue 9
  • DOI: 10.1115/1.4047206

Rebound behaviour of spheres for plastic impacts
journal, October 2003


The interfacial restructuring to amorphous: A new adhesion mechanism of cold-sprayed coatings
journal, July 2016


Dynamic amorphization and recrystallization of metals in kinetic spray process
journal, May 2008

  • Xiong, Yuming; Kang, Kicheol; Bae, Gyuyeol
  • Applied Physics Letters, Vol. 92, Issue 19
  • DOI: 10.1063/1.2928218

Cold spraying – A materials perspective
journal, September 2016


Energy dissipation during normal impact of elastic and elastic–plastic spheres
journal, December 2005


Cold spray coating: review of material systems and future perspectives
journal, December 2013


Metal deposition from a supported metal film using an excimer laser
journal, August 1986

  • Bohandy, J.; Kim, B. F.; Adrian, F. J.
  • Journal of Applied Physics, Vol. 60, Issue 4
  • DOI: 10.1063/1.337287

In-situ observations of single micro-particle impact bonding
journal, March 2018


Physically Based Finite Element Modeling Method to Predict Metallic Bonding in Cold Spray
journal, February 2020


Laser-Induced Forward Transfer: Fundamentals and Applications
journal, August 2018


Response to Comment on “Adiabatic shear instability is not necessary for adhesion in cold spray”
journal, March 2019


Dynamics of supersonic microparticle impact on elastomers revealed by real–time multi–frame imaging
journal, May 2016

  • Veysset, David; Hsieh, Alex J.; Kooi, Steven
  • Scientific Reports, Vol. 6, Issue 1
  • DOI: 10.1038/srep25577

Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis
journal, May 2009

  • Li, Wen-Ya; Zhang, Chao; Li, Chang-Jiu
  • Journal of Thermal Spray Technology, Vol. 18, Issue 5-6
  • DOI: 10.1007/s11666-009-9325-2

Single Impact Bonding of Cold Sprayed Ti-6Al-4V Powders on Different Substrates
journal, January 2015

  • Vidaller, Maria Villa; List, Alexander; Gaertner, Frank
  • Journal of Thermal Spray Technology, Vol. 24, Issue 4
  • DOI: 10.1007/s11666-014-0200-4

Bonding mechanism in cold gas spraying
journal, September 2003


Impact-bonding with aluminum, silver, and gold microparticles: Toward understanding the role of native oxide layer
journal, May 2019