Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy

Lee, Chanho; Kim, George; Chou, Yi; Musicó, Brianna L.; Gao, Michael C.; An, Ke; Song, Gian; Chou, Yi-Chia; Keppens, Veerle; Chen, Wei; Liaw, Peter K.

doi:10.1126/sciadv.aaz4748

Title: Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy

Abstract

The present work discovers the unique deformation behavior of a refractory high-entropy alloy at elevated temperatures.

Authors:

^[1]; Kim, George ^[2]; Chou, Yi ^[3];

^[1];

^[4];

^[5];

^[6];

^[3]; Keppens, Veerle ^[1];

^[2];

^[1]

Department of Materials Science and Engineering, The University of Tennessee, Knoxville, TN 37996-2100, USA.
Department of Mechanical, Materials, and Aerospace Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA.
Department of Electrophysics, National Chiao Tung University, Hsinchu 30010, Taiwan.
National Energy Technology Laboratory/Leidos Research Support Team, Albany, OR 97321, USA.
Neutron Scattering Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA.
Division of Advanced Materials Engineering and Institute for rare metals, Kongju National University, Cheonan, Chungnam 330-717, Republic of Korea.

Publication Date:: Fri Sep 11 00:00:00 EDT 2020

Sponsoring Org.:: USDOE

OSTI Identifier:: 1658997

Grant/Contract Number:: 89243318CFE000003; AC02-05CH11231

Resource Type:: Published Article

Journal Name:: Science Advances

Additional Journal Information:: Journal Name: Science Advances Journal Volume: 6 Journal Issue: 37; Journal ID: ISSN 2375-2548

Publisher:: American Association for the Advancement of Science (AAAS)

Country of Publication:: United States

Language:: English

Citation Formats


                    Lee, Chanho, Kim, George, Chou, Yi, Musicó, Brianna L., Gao, Michael C., An, Ke, Song, Gian, Chou, Yi-Chia, Keppens, Veerle, Chen, Wei, and Liaw, Peter K. Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy.  United States: N. p., 2020. 
Web.  doi:10.1126/sciadv.aaz4748.

Copy to clipboard


                    Lee, Chanho, Kim, George, Chou, Yi, Musicó, Brianna L., Gao, Michael C., An, Ke, Song, Gian, Chou, Yi-Chia, Keppens, Veerle, Chen, Wei, & Liaw, Peter K. Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy.  United States.  https://doi.org/10.1126/sciadv.aaz4748

Copy to clipboard


                    Lee, Chanho, Kim, George, Chou, Yi, Musicó, Brianna L., Gao, Michael C., An, Ke, Song, Gian, Chou, Yi-Chia, Keppens, Veerle, Chen, Wei, and Liaw, Peter K. Fri .  
"Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy".  United States.  https://doi.org/10.1126/sciadv.aaz4748.

Copy to clipboard


                    
@article{osti_1658997,

  title        = {Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy},

  author       = {Lee, Chanho and Kim, George and Chou, Yi and Musicó, Brianna L. and Gao, Michael C. and An, Ke and Song, Gian and Chou, Yi-Chia and Keppens, Veerle and Chen, Wei and Liaw, Peter K.},

  abstractNote = {The present work discovers the unique deformation behavior of a refractory high-entropy alloy at elevated temperatures.},

  doi          = {10.1126/sciadv.aaz4748},

  journal      = {Science Advances},

  number       = 37,

  volume       = 6,

  place        = {United States},

  year         = {Fri Sep 11 00:00:00 EDT 2020},

  month        = {Fri Sep 11 00:00:00 EDT 2020}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
https://doi.org/10.1126/sciadv.aaz4748

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice
journal, October 1999

Ungár, T.; Dragomir, I.; Révész, Á.
Journal of Applied Crystallography, Vol. 32, Issue 5
DOI: 10.1107/S0021889899009334

Effect of Temperature on the Elastic Anisotropy of Pure Fe and ${Fe}_{0.9} {Cr}_{0.1}$ Random Alloy
journal, November 2011

Razumovskiy, V. I.; Ruban, A. V.; Korzhavyi, P. A.
Physical Review Letters, Vol. 107, Issue 20
DOI: 10.1103/PhysRevLett.107.205504

Critical Poisson’s ratio for plasticity in Fe–Mo–C–B–Ln bulk amorphous steel
journal, May 2006

Gu, X. J.; McDermott, A. G.; Poon, S. Joseph
Applied Physics Letters, Vol. 88, Issue 21
DOI: 10.1063/1.2206149

X-ray line broadening from filed aluminium and wolfram
journal, January 1953

Williamson, G. K.; Hall, W. H.
Acta Metallurgica, Vol. 1, Issue 1
DOI: 10.1016/0001-6160(53)90006-6

Lattice distortion in a strong and ductile refractory high-entropy alloy
journal, November 2018

Lee, Chanho; Song, Gian; Gao, Michael C.
Acta Materialia, Vol. 160
DOI: 10.1016/j.actamat.2018.08.053

XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals
journal, August 1954

Pugh, S. F.
The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 45, Issue 367
DOI: 10.1080/14786440808520496

Universal Elastic Anisotropy Index
journal, August 2008

Ranganathan, Shivakumar I.; Ostoja-Starzewski, Martin
Physical Review Letters, Vol. 101, Issue 5
DOI: 10.1103/PhysRevLett.101.055504

“Ideal” Engineering Alloys
journal, March 2007

Li, Tianshu; Morris, J. W.; Nagasako, N.
Physical Review Letters, Vol. 98, Issue 10
DOI: 10.1103/PhysRevLett.98.105503

In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy
journal, February 2014

Wu, Y.; Liu, W. H.; Wang, X. L.
Applied Physics Letters, Vol. 104, Issue 5
DOI: 10.1063/1.4863748

Projector augmented-wave method
journal, December 1994

Blöchl, P. E.
Physical Review B, Vol. 50, Issue 24, p. 17953-17979
DOI: 10.1103/PhysRevB.50.17953

Microstructural development in equiatomic multicomponent alloys
journal, July 2004

Cantor, B.; Chang, I. T. H.; Knight, P.
Materials Science and Engineering: A, Vol. 375-377
DOI: 10.1016/j.msea.2003.10.257

Theoretical predictions of structure and related properties of intermetallics
journal, April 1992

Pettifor, D. G.
Materials Science and Technology, Vol. 8, Issue 4
DOI: 10.1179/mst.1992.8.4.345

In situ neutron diffraction study of IF and ultra low carbon steels upon tensile deformation
journal, February 2003

Tomota, Y.; Lukas, P.; Harjo, S.
Acta Materialia, Vol. 51, Issue 3
DOI: 10.1016/S1359-6454(02)00473-1

Inter- and intragranular stresses in cyclically-deformed 316 stainless steel
journal, June 2005

Wang, X. -L.; Wang, Y. D.; Stoica, A. D.
Materials Science and Engineering: A, Vol. 399, Issue 1-2
DOI: 10.1016/j.msea.2005.02.030

Kinetics of dislocations in pure Fe. Part I. In situ straining experiments at room temperature
journal, May 2010

Caillard, D.
Acta Materialia, Vol. 58, Issue 9
DOI: 10.1016/j.actamat.2010.02.023

Charting the complete elastic properties of inorganic crystalline compounds
journal, March 2015

de Jong, Maarten; Chen, Wei; Angsten, Thomas
Scientific Data, Vol. 2, Issue 1
DOI: 10.1038/sdata.2015.9

Elastic properties of Al CrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory
journal, August 2018

Zhang, Hualei; Sun, Xun; Lu, Song
Acta Materialia, Vol. 155
DOI: 10.1016/j.actamat.2018.05.050

Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls
journal, August 1958

Kr�ner, Ekkehart
Zeitschrift f�r Physik, Vol. 151, Issue 4
DOI: 10.1007/BF01337948

The Elastic Behaviour of a Crystalline Aggregate
journal, May 1952

Hill, R.
Proceedings of the Physical Society. Section A, Vol. 65, Issue 5
DOI: 10.1088/0370-1298/65/5/307

Ab initio design of elastically isotropic TiZrNbMoV high-entropy alloys
journal, June 2014

Tian, Fuyang; Varga, Lajos Karoly; Chen, Nanxian
Journal of Alloys and Compounds, Vol. 599
DOI: 10.1016/j.jallcom.2014.01.237

A family of ductile intermetallic compounds
journal, August 2003

Gschneidner, Karl; Russell, Alan; Pecharsky, Alexandra
Nature Materials, Vol. 2, Issue 9
DOI: 10.1038/nmat958

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
journal, May 2016

Li, Zhiming; Pradeep, Konda Gokuldoss; Deng, Yun
Nature, Vol. 534, Issue 7606
DOI: 10.1038/nature17981

High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy
journal, August 2014

Francis, E. M.; Grant, B. M. B.; Fonseca, J. Quinta da
Acta Materialia, Vol. 74
DOI: 10.1016/j.actamat.2014.04.028

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction
journal, September 2016

Wang, Zhuqing; Stoica, Alexandru D.; Ma, Dong
Materials Science and Engineering: A, Vol. 674
DOI: 10.1016/j.msea.2016.08.010

Diffraction elastic constants of a cubic polycrystal
journal, August 1997

de Wit, R.
Journal of Applied Crystallography, Vol. 30, Issue 4
DOI: 10.1107/S0021889896012812

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
journal, May 2011

Guo, Sheng; Ng, Chun; Lu, Jian
Journal of Applied Physics, Vol. 109, Issue 10
DOI: 10.1063/1.3587228

A fracture-resistant high-entropy alloy for cryogenic applications
journal, September 2014

Gludovatz, B.; Hohenwarter, A.; Catoor, D.
Science, Vol. 345, Issue 6201
DOI: 10.1126/science.1254581

ElAM: A computer program for the analysis and representation of anisotropic elastic properties
journal, December 2010

Marmier, Arnaud; Lethbridge, Zoe A. D.; Walton, Richard I.
Computer Physics Communications, Vol. 181, Issue 12
DOI: 10.1016/j.cpc.2010.08.033

High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
journal, May 2017

Tracy, Cameron L.; Park, Sulgiye; Rittman, Dylan R.
Nature Communications, Vol. 8, Issue 1
DOI: 10.1038/ncomms15634

In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy
journal, November 2011

Huang, Shenyan; Brown, Donald W.; Clausen, Bjørn
Metallurgical and Materials Transactions A, Vol. 43, Issue 5
DOI: 10.1007/s11661-011-0979-2

In-situ neutron diffraction studies on high-temperature deformation behavior in a CoCrFeMnNi high entropy alloy
journal, July 2015

Woo, Wanchuck; Huang, E-Wen; Yeh, Jien-Wei
Intermetallics, Vol. 62
DOI: 10.1016/j.intermet.2015.02.020

Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy
journal, February 2017

Rao, S. I.; Varvenne, C.; Woodward, C.
Acta Materialia, Vol. 125
DOI: 10.1016/j.actamat.2016.12.011

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy
journal, October 2014

Stoica, G. M.; Stoica, A. D.; Miller, M. K.
Nature Communications, Vol. 5, Issue 1
DOI: 10.1038/ncomms6178

First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation
journal, December 2019

Kim, George; Diao, Haoyan; Lee, Chanho
Acta Materialia, Vol. 181
DOI: 10.1016/j.actamat.2019.09.026

Similar Records in DOE PAGES and OSTI.GOV collections:

Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

Journal Article Picak, S. ; Singh, P. ; Salas, D. ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Multi-principal-element alloys (also known as medium and high entropy alloys) offer a much larger and richer design space than conventional alloys, providing opportunities for discovering new functionalities and their governing physics. Some of these alloys exhibit an outstanding combination of high strength and ductility, linked to the activation of various deformation modes triggered by low-energy stacking faults. However, a pressing question remains: Is the plasticity of medium- and high-entropy alloys governed only by stacking fault energy, or does atomic short-range order (SRO) play a role? Here, to answer this, we investigated how SRO affects the deformation in single-crystalline NiCoCr, withmore »« less
https://doi.org/10.1016/j.msea.2023.145309
In situ neutron diffraction study on tensile deformation behavior of carbon-strengthened CoCrFeMnNi high-entropy alloys at room and elevated temperatures

Journal Article Liu, Tingkun ; Gao, Yanfei ; Bei, Hongbin ; ... - Journal of Materials Research

In this paper, carbon is doped into a CoCrFeMnNi high-entropy alloy as an interstitial atom, improving the single phase solid solution alloy with a good combination of strength and ductility at room temperature by introducing deformation twins. In situ neutron diffraction (ND) is applied to investigate the carbon-doped CoCrFeMnNi deformation mechanism and micromechanical behaviors during uniaxial tension at room and elevated temperatures. With in situ results accompanied with the microstructure and texture measurement, it is found that the plastic deformation is dominated by dislocation slip at an early stage at both temperatures. However, at high strain level, deformation is mediatedmore »« less
Cited by 12
https://doi.org/10.1557/jmr.2018.180

Full Text Available
Atomistic simulations of dislocation mobility in refractory high-entropy alloys and the effect of chemical short-range order

Journal Article Yin, Sheng ; Zuo, Yunxing ; Abu-Odeh, Anas ; ... - Nature Communications

Abstract Refractory high-entropy alloys (RHEAs) are designed for high elevated-temperature strength, with both edge and screw dislocations playing an important role for plastic deformation. However, they can also display a significant energetic driving force for chemical short-range ordering (SRO). Here, we investigate mechanisms underlying the mobilities of screw and edge dislocations in the body-centered cubic MoNbTaW RHEA over a wide temperature range using extensive molecular dynamics simulations based on a highly-accurate machine-learning interatomic potential. Further, we specifically evaluate how these mechanisms are affected by the presence of SRO. The mobility of edge dislocations is found to be enhanced by themore »« less
https://doi.org/10.1038/s41467-021-25134-0
Temperature effects on deformation and serration behavior of high-entropy alloys (HEAs)

Journal Article Antonaglia, J. ; Xie, X. ; Tang, Z. ; ... - JOM. Journal of the Minerals, Metals & Materials Society

Many materials are known to deform under shear in an intermittent way with slip avalanches detected as acoustic emission and serrations in the stress–strain curves. Similar serrations have recently been observed in a new class of materials, called high-entropy alloys (HEAs). Here, we discuss the serration behaviors of several HEAs from cryogenic to elevated temperatures. The experimental results of slow compression and tension tests are compared with the predictions of a slip-avalanche model for the deformation of a broad range of solids. The results shed light on the deformation processes in HEAs. Temperature effects on the distributions of stress dropsmore »« less
Cited by 63
https://doi.org/10.1007/s11837-014-1130-9

Full Text Available
Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders

Journal Article Mooraj, Shahryar ; Kim, George ; Fan, Xuesong ; ... - Communications Materials

Laser powder-bed fusion (L-PBF) additive manufacturing presents ample opportunities to produce net-shape parts. The complex laser-powder interactions result in high cooling rates that often lead to unique microstructures and excellent mechanical properties. Refractory high-entropy alloys show great potential for high-temperature applications but are notoriously difficult to process by additive processes due to their sensitivity to cracking and defects, such as un-melted powders and keyholes. Here, we present a method based on a normalized model-based processing diagram to achieve a nearly defect-free TiZrNbTa alloy via in-situ alloying of elemental powders during L-PBF. Compared to its as-cast counterpart, the as-printed TiZrNbTa exhibitsmore »« less
https://doi.org/10.1038/s43246-024-00452-0

Full Text Available

Similar Records

Title: Temperature dependence of elastic and plastic deformation behavior of a refractory high-entropy alloy

Abstract

Citation Formats

The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice journal, October 1999

Effect of Temperature on the Elastic Anisotropy of Pure Fe and Fe 0.9 Cr 0.1 Random Alloy journal, November 2011

Critical Poisson’s ratio for plasticity in Fe–Mo–C–B–Ln bulk amorphous steel journal, May 2006

X-ray line broadening from filed aluminium and wolfram journal, January 1953

Lattice distortion in a strong and ductile refractory high-entropy alloy journal, November 2018

XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals journal, August 1954

Universal Elastic Anisotropy Index journal, August 2008

“Ideal” Engineering Alloys journal, March 2007

In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy journal, February 2014

Projector augmented-wave method journal, December 1994

Microstructural development in equiatomic multicomponent alloys journal, July 2004

Theoretical predictions of structure and related properties of intermetallics journal, April 1992

In situ neutron diffraction study of IF and ultra low carbon steels upon tensile deformation journal, February 2003

Inter- and intragranular stresses in cyclically-deformed 316 stainless steel journal, June 2005

Kinetics of dislocations in pure Fe. Part I. In situ straining experiments at room temperature journal, May 2010

Charting the complete elastic properties of inorganic crystalline compounds journal, March 2015

Elastic properties of Al CrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory journal, August 2018

Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls journal, August 1958

The Elastic Behaviour of a Crystalline Aggregate journal, May 1952

Ab initio design of elastically isotropic TiZrNbMoV high-entropy alloys journal, June 2014

A family of ductile intermetallic compounds journal, August 2003

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off journal, May 2016

High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy journal, August 2014

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction journal, September 2016

Diffraction elastic constants of a cubic polycrystal journal, August 1997

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys journal, May 2011

A fracture-resistant high-entropy alloy for cryogenic applications journal, September 2014

ElAM: A computer program for the analysis and representation of anisotropic elastic properties journal, December 2010

High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi journal, May 2017

In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy journal, November 2011

In-situ neutron diffraction studies on high-temperature deformation behavior in a CoCrFeMnNi high entropy alloy journal, July 2015

Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy journal, February 2017

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy journal, October 2014

First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation journal, December 2019

The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice
journal, October 1999

Effect of Temperature on the Elastic Anisotropy of Pure Fe and ${Fe}_{0.9} {Cr}_{0.1}$ Random Alloy
journal, November 2011

Critical Poisson’s ratio for plasticity in Fe–Mo–C–B–Ln bulk amorphous steel
journal, May 2006

X-ray line broadening from filed aluminium and wolfram
journal, January 1953

Lattice distortion in a strong and ductile refractory high-entropy alloy
journal, November 2018

XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals
journal, August 1954

Universal Elastic Anisotropy Index
journal, August 2008

“Ideal” Engineering Alloys
journal, March 2007

In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy
journal, February 2014

Projector augmented-wave method
journal, December 1994

Microstructural development in equiatomic multicomponent alloys
journal, July 2004

Theoretical predictions of structure and related properties of intermetallics
journal, April 1992

In situ neutron diffraction study of IF and ultra low carbon steels upon tensile deformation
journal, February 2003

Inter- and intragranular stresses in cyclically-deformed 316 stainless steel
journal, June 2005

Kinetics of dislocations in pure Fe. Part I. In situ straining experiments at room temperature
journal, May 2010

Charting the complete elastic properties of inorganic crystalline compounds
journal, March 2015

Elastic properties of Al CrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory
journal, August 2018

Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls
journal, August 1958

The Elastic Behaviour of a Crystalline Aggregate
journal, May 1952

Ab initio design of elastically isotropic TiZrNbMoV high-entropy alloys
journal, June 2014

A family of ductile intermetallic compounds
journal, August 2003

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
journal, May 2016

High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy
journal, August 2014

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction
journal, September 2016

Diffraction elastic constants of a cubic polycrystal
journal, August 1997

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
journal, May 2011

A fracture-resistant high-entropy alloy for cryogenic applications
journal, September 2014

ElAM: A computer program for the analysis and representation of anisotropic elastic properties
journal, December 2010

High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
journal, May 2017

In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy
journal, November 2011

In-situ neutron diffraction studies on high-temperature deformation behavior in a CoCrFeMnNi high entropy alloy
journal, July 2015

Atomistic simulations of dislocations in a model BCC multicomponent concentrated solid solution alloy
journal, February 2017

Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy
journal, October 2014

First-principles and machine learning predictions of elasticity in severely lattice-distorted high-entropy alloys with experimental validation
journal, December 2019