Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties

WANG, Pengju; CHEN, Zejun; HUANG, Hongtao; LIN, Jianshu; LI, Boxin; LIU, Qing

doi:10.1016/j.cja.2020.08.044

Title: Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties

Full Record
Other Related Research

Authors:: WANG, Pengju; CHEN, Zejun; HUANG, Hongtao; LIN, Jianshu; LI, Boxin; LIU, Qing

Publication Date:: Tue Sep 01 00:00:00 EDT 2020

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1658633

Resource Type:: Published Article

Journal Name:: Chinese Journal of Aeronautics

Additional Journal Information:: Journal Name: Chinese Journal of Aeronautics; Journal ID: ISSN 1000-9361

Publisher:: Elsevier

Country of Publication:: China

Language:: English

Citation Formats


                    WANG, Pengju, CHEN, Zejun, HUANG, Hongtao, LIN, Jianshu, LI, Boxin, and LIU, Qing. Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties.  China: N. p., 2020. 
Web.  doi:10.1016/j.cja.2020.08.044.

Copy to clipboard


                    WANG, Pengju, CHEN, Zejun, HUANG, Hongtao, LIN, Jianshu, LI, Boxin, & LIU, Qing. Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties.  China.  https://doi.org/10.1016/j.cja.2020.08.044

Copy to clipboard


                    WANG, Pengju, CHEN, Zejun, HUANG, Hongtao, LIN, Jianshu, LI, Boxin, and LIU, Qing. Tue .  
"Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties".  China.  https://doi.org/10.1016/j.cja.2020.08.044.

Copy to clipboard


                    
@article{osti_1658633,

  title        = {Fabrication of Ti/Al/Mg laminated composites by hot roll bonding and their microstructures and mechanical properties},

  author       = {WANG, Pengju and CHEN, Zejun and HUANG, Hongtao and LIN, Jianshu and LI, Boxin and LIU, Qing},

  abstractNote = {},

  doi          = {10.1016/j.cja.2020.08.044},

  journal      = {Chinese Journal of Aeronautics},

  number       = ,

  volume       = ,

  place        = {China},

  year         = {Tue Sep 01 00:00:00 EDT 2020},

  month        = {Tue Sep 01 00:00:00 EDT 2020}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Publisher's Version of Record
https://doi.org/10.1016/j.cja.2020.08.044

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Effect of Anisotropy on Microstructures and Mechanical Properties of Rolled Ti/Al/Mg/Al/Ti Laminates

Journal Article Mi, Yujie ; Nie, Huihui ; Wang, Taolue ; ... - Journal of Materials Engineering and Performance

TA2/5052Al/AZ31/5052Al/TA2 five-ply laminates were fabricated by hot rolling, and the effect of anisotropy on their microstructures and mechanical properties was studied. After rolling, the Mg/Al and Al/Ti interfaces were both closely connected, but the interfacial shapes were totally different. For the Mg layer microstructures in the middle area, regardless of the direction, dynamic recrystallized (DRXed) grains appeared around the deformation bands. However, twins and a shear zone appeared in the RD sample; the twins decreased in the sample along the 45° angle, and no twins appeared in the TD sample. The Ti layer showed equiaxed grains in different directions, which were attributedmore »« less
https://doi.org/10.1007/S11665-019-04172-2
Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature

Journal Article Wang, Yang ; Liao, Yang ; Wu, Ruizhi ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
https://doi.org/10.1016/j.msea.2020.139494
Effects of the rolling temperature on microstructure and mechanical properties of 2Cr13/316L laminated composites prepared by accumulative roll-bonding (ARB)

Journal Article Cao, R., E-mail: caorui@lut.cn ; Zhao, X. K. ; Ding, Y. ; ... - Materials Characterization

Highlights: • The rolling temperature affects the grain size and microstructural phases of the composite plates. • The rolling temperature affects tensile strength and bending strength of 2Cr13/316L properties of the composite plates. • The temperature gradient and thermal deformation of center and outside regions are different during rolling process. • Composite plate with higher strength and elongation can be obtained by rolling processes. - Abstract: The microstructure and mechanical properties of 2Cr13/316L composite plates by hot-rolling at different rolling temperatures of 1130 °C, 1180 °C, 1250 °C, 1300 °C are investigated in details. With the increase of the rollingmore »« less
https://doi.org/10.1016/J.MATCHAR.2018.03.001
Effect of hot rolling on the microstructure and mechanical properties of Ti{sub 3}Al based dual phase alloys

Conference Wu, J ; Zhang, L ; Hua, W ; ...

Development of {alpha}{sub 2}-Ti{sub 3}Al based dual phase alloys have shown some promising potentials in property improvement by introducing Ti{sub 5}Si{sub 3} silicide phase into the matrix via Si alloying. However, the presence of coarse network of Ti{sub 5}Si{sub 3} phase formed by eutectic reaction in the as-cast state also embrittles the alloy. Both hot rolling and powder metallurgy are considered to be the possible ways to refine the Ti{sub 5}Si{sub 3} phase in the matrix. Two Ti-Al-Si-Nb alloys whose Si contents are 2 and 5 at.% respectively were arc melted into ingots and then hot rolled to sheets inmore »« less
Microstructure and mechanical properties of Mg/Mg bimetal composites fabricated by hot-pressing diffusion and co-extrusion

Journal Article Zhao, K. N. ; Xu, D. X. ; Li, H. X. ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
https://doi.org/10.1016/j.msea.2019.138194

Similar Records