skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Quantifying the resistance to dislocation glide in single phase FeCrAl alloy

Authors:
; ; ; ;
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
1643160
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
International Journal of Plasticity
Additional Journal Information:
Journal Name: International Journal of Plasticity Journal Volume: 132 Journal Issue: C; Journal ID: ISSN 0749-6419
Publisher:
Elsevier
Country of Publication:
United States
Language:
English

Citation Formats

Xu, Shun, Xie, Dongyue, Liu, Guisen, Ming, Kaisheng, and Wang, Jian. Quantifying the resistance to dislocation glide in single phase FeCrAl alloy. United States: N. p., 2020. Web. https://doi.org/10.1016/j.ijplas.2020.102770.
Xu, Shun, Xie, Dongyue, Liu, Guisen, Ming, Kaisheng, & Wang, Jian. Quantifying the resistance to dislocation glide in single phase FeCrAl alloy. United States. https://doi.org/10.1016/j.ijplas.2020.102770
Xu, Shun, Xie, Dongyue, Liu, Guisen, Ming, Kaisheng, and Wang, Jian. Tue . "Quantifying the resistance to dislocation glide in single phase FeCrAl alloy". United States. https://doi.org/10.1016/j.ijplas.2020.102770.
@article{osti_1643160,
title = {Quantifying the resistance to dislocation glide in single phase FeCrAl alloy},
author = {Xu, Shun and Xie, Dongyue and Liu, Guisen and Ming, Kaisheng and Wang, Jian},
abstractNote = {},
doi = {10.1016/j.ijplas.2020.102770},
journal = {International Journal of Plasticity},
number = C,
volume = 132,
place = {United States},
year = {2020},
month = {9}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record
https://doi.org/10.1016/j.ijplas.2020.102770

Save / Share:

Works referenced in this record:

A physically based model of temperature and strain rate dependent yield in BCC metals: Implementation into crystal plasticity
journal, January 2015

  • Lim, Hojun; Battaile, Corbett C.; Carroll, Jay D.
  • Journal of the Mechanics and Physics of Solids, Vol. 74
  • DOI: 10.1016/j.jmps.2014.10.003

Ferrite slip system activation investigated by uniaxial micro-tensile tests and simulations
journal, March 2018


Analysis of heterogeneous deformation and dislocation dynamics in single crystal micropillars under compression
journal, February 2010


Phase transformation and precipitation during solidification of FeCrAl alloy for automobile exhaust gas purifying systems
journal, August 2017


Interfacial morphology evolution in directionally solidified FeCrAl alloys
journal, May 2018


An explicit formulation for multiscale modeling of bcc metals
journal, December 2008

  • Kuchnicki, S. N.; Radovitzky, R. A.; Cuitiño, A. M.
  • International Journal of Plasticity, Vol. 24, Issue 12
  • DOI: 10.1016/j.ijplas.2008.06.003

Crystal plasticity model for BCC iron atomistically informed by kinetics of correlated kinkpair nucleation on screw dislocation
journal, April 2014

  • Narayanan, Sankar; McDowell, David L.; Zhu, Ting
  • Journal of the Mechanics and Physics of Solids, Vol. 65
  • DOI: 10.1016/j.jmps.2014.01.004

Plasticity of Micrometer-Scale Single Crystals in Compression
journal, August 2009


Deformation of as-fabricated and helium implanted 100nm-diameter iron nano-pillars
journal, August 2014


Crystallographic orientation and size dependence of tension–compression asymmetry in molybdenum nano-pillars
journal, January 2012


A differential-exponential hardening law for non-Schmid crystal plasticity finite element modeling of ferrite single crystals
journal, April 2017


Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors
journal, December 2015


Size-dependent creep of duralumin micro-pillars at room temperature
journal, April 2014


Dislocation strengthening in FCC metals and in BCC metals at high temperatures
journal, March 2017


Stochastic effects in plasticity in small volumes
journal, January 2014


Advanced oxidation-resistant iron-based alloys for LWR fuel cladding
journal, May 2014


High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments
journal, September 2013


Micropillar compression of LiF [111] single crystals: Effect of size, ion irradiation and misorientation
journal, September 2012


A phenomenological dislocation mobility law for bcc metals
journal, October 2016


Effect of crystal orientation on the strengthening of iron micro pillars
journal, January 2015


BCC single crystal plasticity modeling and its experimental identification
journal, October 2008

  • Yalcinkaya, T.; Brekelmans, W. A. M.; Geers, M. G. D.
  • Modelling and Simulation in Materials Science and Engineering, Vol. 16, Issue 8
  • DOI: 10.1088/0965-0393/16/8/085007

Interpreting strain burst in micropillar compression through instability of loading system
journal, August 2018


Athermal mechanisms of size-dependent crystal flow gleaned from three-dimensional discrete dislocation simulations
journal, August 2008


Second-order work and strain burst in single-crystalline micropillar plasticity
journal, February 2016


Monotonous deformation behavior of ferritic FeCrAl alloy in the dynamic strain aging regime
journal, June 2018


Miniaturized single-crystalline fcc metals deformed in tension: New insights in size-dependent plasticity
journal, August 2009


Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples
journal, February 2007


Microstructure and mechanical properties of FeCrAl alloys under heavy ion irradiations
journal, May 2018


Revealing orientation-dependent martensitic transformation in a medium Mn steel by micropillar compression
journal, December 2019


Evaluation of Micro-Pillar Compression Tests for Accurate Determination of Elastic-Plastic Constitutive Relations
journal, September 2012

  • Fei, Huiyang; Abraham, Amit; Chawla, Nikhilesh
  • Journal of Applied Mechanics, Vol. 79, Issue 6
  • DOI: 10.1115/1.4006767

Irradiation-enhanced α′ precipitation in model FeCrAl alloys
journal, April 2016


Strength and plasticity of amorphous silicon oxycarbide
journal, April 2019


Smaller is stronger: The effect of strain hardening
journal, December 2009


Grain size dependence of the strength of metals: The Hall–Petch effect does not scale as the inverse square root of grain size
journal, February 2014


Plasticity evolution in nanoscale Cu/Nb single-crystal multilayers as revealed by synchrotron X-ray microdiffraction
journal, May 2015


Strengthening mechanisms of iron micropillars
journal, September 2014


Medium energy ion irradiation capability for studies of radiation damage effects over a wide temperature range
journal, December 2011

  • Usov, I. O.; Devlin, D. J.; Won, J.
  • Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 269, Issue 23
  • DOI: 10.1016/j.nimb.2011.08.018

Nanoindentation: Measuring methods and applications
journal, January 2010


An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
journal, June 1992

  • Oliver, W. C.; Pharr, G. M.
  • Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583
  • DOI: 10.1557/JMR.1992.1564

Microstructural control of FeCrAl alloys using Mo and Nb additions
journal, October 2017


Some remarks on in-situ studies using TEM-heavy-ion accelerator link from the stand point of extracting radiation damage caused by fast neutrons
journal, April 2016


Secondary twin variant selection in four types of double twins in titanium
journal, June 2018


Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
journal, August 2011


Sequential { 10 1 ¯ 2 } twinning stimulated by other twins in titanium
journal, June 2017


Effect of surface orientation on the plasticity of small bcc metals
journal, October 2013


Gradient crystal plasticity including dislocation-based work-hardening and dislocation transport
journal, June 2015


Numerical study of the size-dependent deformation morphology in micropillar compressions by a dislocation-based crystal plasticity model
journal, December 2016


Strain rate effects on the mechanical response in multi- and single-crystalline Cu micropillars: Grain boundary effects
journal, November 2013


Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper
journal, February 2019


Elastic Constants of Iron from 4.2 to 300°K
journal, June 1961


Dislocation loop evolution during in-situ ion irradiation of model FeCrAl alloys
journal, September 2017


Radiation tolerance of neutron-irradiated model Fe–Cr–Al alloys
journal, October 2015


Atomistically informed crystal plasticity model for body-centered cubic iron
journal, May 2012


Impact toughness of commercial and model FeCrAl alloys
journal, September 2018


Critical dimension for the dislocation structure in deformed copper micropillars
journal, April 2019


Dislocation Core Effects on Mobility
book, January 2004


Material rate dependence and localized deformation in crystalline solids
journal, December 1983


Sample Dimensions Influence Strength and Crystal Plasticity
journal, August 2004


Specimen size and shape dependent yield strength in micropillar compression deformation of Mo single crystals
journal, May 2017


An investigation of FeCrAl cladding behavior under normal operating and loss of coolant conditions
journal, August 2017