Development of novel zirconia implant's materials gradated design with improved bioactive surface

Faria, D.; Pires, J. M.; Boccaccini, A. R.; Carvalho, O.; Silva, F. S.; Mesquita-Guimarães, J.

doi:10.1016/j.jmbbm.2019.02.022

Title: Development of novel zirconia implant's materials gradated design with improved bioactive surface

Journal Article · 01 June 2019 · Journal of the Mechanical Behavior of Biomedical Materials

DOI: https://doi.org/10.1016/j.jmbbm.2019.02.022 · OSTI ID:1637145

Faria, D.; Pires, J. M.; Boccaccini, A. R.; Carvalho, O.; Silva, F. S.; Mesquita-Guimarães, J.

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE), Nuclear Fuel Cycle and Supply Chain

Grant/Contract Number:: UID/EEA/04436/2019

OSTI ID:: 1637145

Journal Information:: Journal of the Mechanical Behavior of Biomedical Materials, Journal Name: Journal of the Mechanical Behavior of Biomedical Materials Vol. 94 Journal Issue: C; ISSN 1751-6161

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (67)

Evaluation of hardness and wear of surface treated zirconia on enamel wear. An in-vitro study Aboushahba, Mostafa; Katamish, Hesham; Elagroudy, Mona Future Dental Journal, Vol. 4, Issue 1 https://doi.org/10.1016/j.fdj.2017.10.001	journal	June 2018
Bioactivity and biocompatibility of hydroxyapatite-based bioceramic coatings on zirconium by plasma electrolytic oxidation Aktuğ, Salim Levent; Durdu, Salih; Yalçın, Emine Materials Science and Engineering: C, Vol. 71 https://doi.org/10.1016/j.msec.2016.11.012	journal	February 2017
A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements Anstis, G. R.; Chantikul, P.; Lawn, B. R. Journal of the American Ceramic Society, Vol. 64, Issue 9 https://doi.org/10.1111/j.1151-2916.1981.tb10320.x	journal	September 1981
Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: A review Arifin, Amir; Sulong, Abu Bakar; Muhamad, Norhamidi Materials & Design, Vol. 55 https://doi.org/10.1016/j.matdes.2013.09.045	journal	March 2014
Fracture toughness of dental zirconia before and after autoclaving Ban, Seiji; Suehiro, Yasuhiko; Nakanishi, Hideo Journal of the Ceramic Society of Japan, Vol. 118, Issue 1378 https://doi.org/10.2109/jcersj2.118.406	journal	January 2010
Zirconia/Hydroxyapatite Composites Synthesized Via Sol-Gel: Influence of Hydroxyapatite Content and Heating on Their Biological Properties Bollino, Flavia; Armenia, Emilia; Tranquillo, Elisabetta Materials, Vol. 10, Issue 7 https://doi.org/10.3390/ma10070757	journal	July 2017
The ball on three balls test for strength testing of brittle discs: Part II: analysis of possible errors in the strength determination Börger, Andreas; Supancic, Peter; Danzer, Robert Journal of the European Ceramic Society, Vol. 24, Issue 10-11 https://doi.org/10.1016/j.jeurceramsoc.2003.10.035	journal	September 2004
Bone apposition around two different sandblasted and acid-etched titanium implant surfaces: a histomorphometric study in canine mandibles Bornstein, Michael M.; Valderrama, Pilar; Jones, Archie A. Clinical Oral Implants Research, Vol. 19, Issue 3 https://doi.org/10.1111/j.1600-0501.2007.01473.x	journal	March 2008
Tribological characterization of bioactive zirconia composite layers on zirconia structures Buciumeanu, M.; Faria, D.; Mesquita-Guimarães, J. Ceramics International, Vol. 44, Issue 15 https://doi.org/10.1016/j.ceramint.2018.07.094	journal	October 2018
The effect of surface treatment on the friction and wear behavior of dental Y-TZP ceramic against human enamel Buciumeanu, M.; Queiroz, J. R. C.; Martinelli, A. E. Tribology International, Vol. 116 https://doi.org/10.1016/j.triboint.2017.07.016	journal	December 2017
Direct silanization of zirconia for increased biointegration Caravaca, Carlos; Shi, Liu; Balvay, Sandra Acta Biomaterialia, Vol. 46 https://doi.org/10.1016/j.actbio.2016.09.034	journal	December 2016
A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method Chantikul, P.; Anstis, G. R.; Lawn, B. R. Journal of the American Ceramic Society, Vol. 64, Issue 9 https://doi.org/10.1111/j.1151-2916.1981.tb10321.x	journal	September 1981
Bioceramic coating of hydroxyapatite on titanium substrate with Nd-YAG laser Cheng, Gary J.; Pirzada, Daniel; Cai, M. Materials Science and Engineering: C, Vol. 25, Issue 4 https://doi.org/10.1016/j.msec.2005.05.002	journal	June 2005
Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants Chevalier, Jérôme; Gremillard, Laurent; Deville, Sylvain Annual Review of Materials Research, Vol. 37, Issue 1 https://doi.org/10.1146/annurev.matsci.37.052506.084250	journal	August 2007
Osteogenic Responses to Zirconia with Hydroxyapatite Coating by Aerosol Deposition Cho, Y.; Hong, J.; Ryoo, H. Journal of Dental Research, Vol. 94, Issue 3 https://doi.org/10.1177/0022034514566432	journal	December 2014
Comparison of the Osteogenic Potential of Titanium- and Modified Zirconia-Based Bioceramics Cho, Young-Dan; Shin, Ji-Cheol; Kim, Hye-Lee International Journal of Molecular Sciences, Vol. 15, Issue 3 https://doi.org/10.3390/ijms15034442	journal	March 2014
Zirconia dental implants: where are we now, and where are we heading? Cionca, Norbert; Hashim, Dena; Mombelli, Andrea Periodontology 2000, Vol. 73, Issue 1 https://doi.org/10.1111/prd.12180	journal	December 2016
Apatite Biominerals Combes, Christèle; Cazalbou, Sophie; Rey, Christian Minerals, Vol. 6, Issue 2 https://doi.org/10.3390/min6020034	journal	April 2016
Mechanical properties of hydroxyapatite–zirconia compacts sintered by two different sintering methods Curran, Declan J.; Fleming, Thomas J.; Towler, Mark R. Journal of Materials Science: Materials in Medicine, Vol. 21, Issue 4 https://doi.org/10.1007/s10856-009-3974-z	journal	December 2009
Bioactive materials driven primary stability on titanium biocomposites Dantas, T. A.; Abreu, C. S.; Costa, M. M. Materials Science and Engineering: C, Vol. 77 https://doi.org/10.1016/j.msec.2017.04.014	journal	August 2017
The ball on three balls test—Strength and failure analysis of different materials Danzer, Robert; Harrer, Walter; Supancic, Peter Journal of the European Ceramic Society, Vol. 27, Issue 2-3 https://doi.org/10.1016/j.jeurceramsoc.2006.05.034	journal	January 2007
Enhancing the bioactivity of zirconia and zirconia composites by surface modification Dehestani, Mahdi; Ilver, Lars; Adolfsson, Erik Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 100B, Issue 3 https://doi.org/10.1002/jbm.b.32647	journal	January 2012
Calcium Orthophosphate-Based Bioceramics Dorozhkin, Sergey Materials, Vol. 6, Issue 9 https://doi.org/10.3390/ma6093840	journal	September 2013
Implantation of hydrophilic and hydrophobic titanium discs in rat tibia: cellular reactions on the surfaces during the first 3 weeks in bone Eriksson, Cecilia; Nygren, Håkan; Ohlson, Karin Biomaterials, Vol. 25, Issue 19 https://doi.org/10.1016/j.biomaterials.2003.12.006	journal	August 2004
The bending stress distribution in bilayered and graded zirconia-based dental ceramics Fabris, Douglas; Souza, Júlio C. M.; Silva, Filipe S. Ceramics International, Vol. 42, Issue 9 https://doi.org/10.1016/j.ceramint.2016.03.245	journal	July 2016
Thermal residual stresses in bilayered, trilayered and graded dental ceramics Fabris, Douglas; Souza, Júlio C. M.; Silva, Filipe S. Ceramics International, Vol. 43, Issue 4 https://doi.org/10.1016/j.ceramint.2016.11.209	journal	March 2017
Ti6Al4V laser surface preparation and functionalization using hydroxyapatite for biomedical applications Faria, D.; Abreu, C. S.; Buciumeanu, M. Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 106, Issue 4 https://doi.org/10.1002/jbm.b.33964	journal	July 2017
Phase Analysis in Zirconia Systems Garvie, Ronald C.; Nicholson, Patrick S. Journal of the American Ceramic Society, Vol. 55, Issue 6 https://doi.org/10.1111/j.1151-2916.1972.tb11290.x	journal	June 1972
Current trends in dental implants Gaviria, Laura; Salcido, John Paul; Guda, Teja Journal of the Korean Association of Oral and Maxillofacial Surgeons, Vol. 40, Issue 2 https://doi.org/10.5125/jkaoms.2014.40.2.50	journal	January 2014
A review on the wettability of dental implant surfaces II: Biological and clinical aspects Gittens, Rolando A.; Scheideler, Lutz; Rupp, Frank Acta Biomaterialia, Vol. 10, Issue 7 https://doi.org/10.1016/j.actbio.2014.03.032	journal	July 2014
Progress on the preparation of nanocrystalline apatites and surface characterization: Overview of fundamental and applied aspects Gómez-Morales, Jaime; Iafisco, Michele; Delgado-López, José Manuel Progress in Crystal Growth and Characterization of Materials, Vol. 59, Issue 1 https://doi.org/10.1016/j.pcrysgrow.2012.11.001	journal	March 2013
New perspectives for recycling dental zirconia waste resulting from CAD/CAM manufacturing process Gouveia, P. Faust; Schabbach, L. M.; Souza, J. C. M. Journal of Cleaner Production, Vol. 152 https://doi.org/10.1016/j.jclepro.2017.03.117	journal	May 2017
Activity of plasma sprayed yttria stabilized zirconia reinforced hydroxyapatite/Ti–6Al–4V composite coatings in simulated body fluid Gu, Y. W.; Khor, K. A.; Pan, D. Biomaterials, Vol. 25, Issue 16 https://doi.org/10.1016/j.biomaterials.2003.09.101	journal	July 2004
Influence of interlayer design on residual thermal stresses in trilayered and graded all-ceramic restorations Henriques, Bruno; Fabris, Douglas; Souza, Júlio C. M. Materials Science and Engineering: C, Vol. 71 https://doi.org/10.1016/j.msec.2016.11.087	journal	February 2017
Hydroxyapatite-doped zirconia for preparation of biomedical composites ceramics Inuzuka, M. Solid State Ionics, Vol. 172, Issue 1-4 https://doi.org/10.1016/j.ssi.2004.01.054	journal	August 2004
Injectable calcium phosphate cement for bone repair and implant fixation Jansen, John; Ooms, Edwin; Verdonschot, Nico Orthopedic Clinics of North America, Vol. 36, Issue 1 https://doi.org/10.1016/j.ocl.2004.06.014	journal	January 2005
How useful is SBF in predicting in vivo bone bioactivity? Kokubo, Tadashi; Takadama, Hiroaki Biomaterials, Vol. 27, Issue 15 https://doi.org/10.1016/j.biomaterials.2006.01.017	journal	May 2006
Yttria concentration dependence of tensile strength in yttria-stabilized zirconia Kondoh, Junya; Shiota, Hirohisa; Kawachi, Katsuhiro Journal of Alloys and Compounds, Vol. 365, Issue 1-2 https://doi.org/10.1016/S0925-8388(03)00640-6	journal	February 2004
Mechanical properties of micro- and nanocrystalline diamond foils Lodes, M. A.; Kachold, F. S.; Rosiwal, S. M. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, Issue 2038 https://doi.org/10.1098/rsta.2014.0136	journal	March 2015
A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants Maçon, Anthony L. B.; Kim, Taek B.; Valliant, Esther M. Journal of Materials Science: Materials in Medicine, Vol. 26, Issue 2 https://doi.org/10.1007/s10856-015-5403-9	journal	February 2015
Effect of sintering pressure on microstructure and mechanical properties of hot-pressed Ti6Al4V-ZrO2 materials Madeira, S.; Pinto, A. M. P.; Rodrigues, L. C. Materials & Design, Vol. 120 https://doi.org/10.1016/j.matdes.2017.02.038	journal	April 2017
Zirconia–hydroxyapatite composite material with micro porous structure Matsumoto, Takuya Junior; An, Sang-Hyun; Ishimoto, Takuya Dental Materials, Vol. 27, Issue 11 https://doi.org/10.1016/j.dental.2011.07.009	journal	November 2011
Effect of a novel sintering process on mechanical properties of hydroxyapatite ceramics Mazaheri, Mehdi; Haghighatzadeh, M.; Zahedi, A. M. Journal of Alloys and Compounds, Vol. 471, Issue 1-2 https://doi.org/10.1016/j.jallcom.2008.03.066	journal	March 2009
Mechanical properties of alumina-zirconia composites for ceramic abutments Moraes, Maria Cecilia Corrêa de Sá e. Benevides de; Elias, Carlos Nelson; Duailibi Filho, Jamil Materials Research, Vol. 7, Issue 4 https://doi.org/10.1590/S1516-14392004000400021	journal	December 2004
Preparation of SBF with different HCO3- content and its influence on the composition of biomimetic apatites Müller, Lenka; Müller, Frank A. Acta Biomaterialia, Vol. 2, Issue 2 https://doi.org/10.1016/j.actbio.2005.11.001	journal	March 2006
Mechanical properties of biomedical titanium alloys Niinomi, Mitsuo Materials Science and Engineering: A, Vol. 243, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00806-X	journal	March 1998
Comparison of hydroxyapatite and beta tricalcium phosphate as bone substitutes after excision of bone tumors Ogose, Akira; Hotta, Tetsuo; Kawashima, Hiroyuki Journal of Biomedical Materials Research, Vol. 72B, Issue 1 https://doi.org/10.1002/jbm.b.30136	journal	January 2004
Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming Oh, Gye-Jeong; Yun, Kwi-Dug; Lee, Kwang-Min The Journal of Advanced Prosthodontics, Vol. 2, Issue 3 https://doi.org/10.4047/jap.2010.2.3.81	journal	January 2010
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.3	journal	January 2004
A mineralogical view of apatitic biomaterials Pasteris, Jill Dill American Mineralogist, Vol. 101, Issue 12 https://doi.org/10.2138/am-2016-5732	journal	December 2016
Microstructure and mechanical properties of NiCoCrAlYTa alloy processed by press and sintering route Pereira, J. C.; Zambrano, J. C.; Afonso, C. R. M. Materials Characterization, Vol. 101 https://doi.org/10.1016/j.matchar.2015.02.001	journal	March 2015
Zirconia as a ceramic biomaterial Piconi, C.; Maccauro, G. Biomaterials, Vol. 20, Issue 1 https://doi.org/10.1016/S0142-9612(98)00010-6	journal	January 1999
Fabrication, Properties and Applications of Dense Hydroxyapatite: A Review Prakasam, Mythili; Locs, Janis; Salma-Ancane, Kristine Journal of Functional Biomaterials, Vol. 6, Issue 4 https://doi.org/10.3390/jfb6041099	journal	December 2015
Dependence of the mechanical properties of sintered hydroxyapatite on the sintering temperature Prokopiev, Oleg; Sevostianov, Igor Materials Science and Engineering: A, Vol. 431, Issue 1-2 https://doi.org/10.1016/j.msea.2006.05.158	journal	September 2006
Fractographic analyses of three ceramic whole crown restoration failures Quinn, J.; Quinn, G.; Kelly, J. Dental Materials, Vol. 21, Issue 10 https://doi.org/10.1016/j.dental.2005.01.006	journal	October 2005
Ceramics for Prosthetic Hip and Knee Joint Replacement Rahaman, Mohamed N.; Yao, Aihua; Bal, B. Sonny Journal of the American Ceramic Society, Vol. 90, Issue 7 https://doi.org/10.1111/j.1551-2916.2007.01725.x	journal	July 2007
Towards long lasting zirconia-based composites for dental implants: Transformation induced plasticity and its consequence on ceramic reliability Reveron, Helen; Fornabaio, Marta; Palmero, Paola Acta Biomaterialia, Vol. 48 https://doi.org/10.1016/j.actbio.2016.11.040	journal	January 2017
Processing and characterization of laser sintered hydroxyapatite scaffold for tissue engineering Shuai, Cijun; Feng, Pei; Cao, Chengde Biotechnology and Bioprocess Engineering, Vol. 18, Issue 3 https://doi.org/10.1007/s12257-012-0508-1	journal	May 2013
Cyclic Fatigue Life- and Crack-Growth Behavior of Zirconia-Niobium Composites Smirnov, A.; Gutiérrez-González, C. F.; Bartolomé, J. F. Journal of the American Ceramic Society, Vol. 96, Issue 6 https://doi.org/10.1111/jace.12384	journal	May 2013
Paper-derived hydroxyapatite Stares, Steferson Luiz; Fredel, Márcio Celso; Greil, Peter Ceramics International, Vol. 39, Issue 6 https://doi.org/10.1016/j.ceramint.2013.02.062	journal	August 2013
Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics Stawarczyk, Bogna; Özcan, Mutlu; Trottmann, Albert Journal of the Mechanical Behavior of Biomedical Materials, Vol. 10 https://doi.org/10.1016/j.jmbbm.2012.01.020	journal	June 2012
From monetite plate to hydroxyapatite nanofibers by monoethanolamine assisted hydrothermal approach Suchanek, Katarzyna; Bartkowiak, Amanda; Perzanowski, Marcin Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-33936-4	journal	October 2018
Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: A review Sun, Limin; Berndt, Christopher C.; Gross, Karlis A. Journal of Biomedical Materials Research, Vol. 58, Issue 5 https://doi.org/10.1002/jbm.1056	journal	January 2001
Strength and fracture toughness of zirconia dental ceramics Turon-Vinas, Miquel; Anglada, Marc Dental Materials, Vol. 34, Issue 3 https://doi.org/10.1016/j.dental.2017.12.007	journal	March 2018
Osteoconductivity of Superhydrophilic Anodized TiO₂ Coatings on Ti Treated with Hydrothermal Processes Yamamoto, Dai; Arii, Kazushi; Kuroda, Kensuke Journal of Biomaterials and Nanobiotechnology, Vol. 04, Issue 01 https://doi.org/10.4236/jbnb.2013.41007	journal	January 2013
Relationship between flexural strength and surface roughness for hot-pressed Si3N4 self-reinforced ceramics Zheng, Yesha; Vieira, Joaquim Manuel; Oliveira, Filipe José Journal of the European Ceramic Society, Vol. 20, Issue 9 https://doi.org/10.1016/S0955-2219(00)00018-2	journal	August 2000
Hydrothermal treatment of titanium alloys for the enhancement of osteoconductivity Zuldesmi, Mansjur; Waki, Atsushi; Kuroda, Kensuke Materials Science and Engineering: C, Vol. 49 https://doi.org/10.1016/j.msec.2015.01.031	journal	April 2015

Similar Records

Effect of laser surface texturing on primary stability and surface properties of zirconia implants

Journal Article · 2017 · Ceramics International · OSTI ID:1549752

Moura, C. G.; Pereira, R.; Buciumeanu, M.; +4 more

Tribological behavior of bioactive multi-material structures targeting orthopedic applications

Journal Article · 2019 · Journal of the Mechanical Behavior of Biomedical Materials · OSTI ID:1637146

Costa, M. M.; Bartolomeu, F.; Alves, N.; +2 more

Tribological characterization of bioactive zirconia composite layers on zirconia structures

Journal Article · 2018 · Ceramics International · OSTI ID:1692162

Buciumeanu, M.; Faria, D.; Mesquita-Guimarães, J.; +1 more

Title: Development of novel zirconia implant's materials gradated design with improved bioactive surface

Citation Formats

References (67)

Similar Records

Related Subjects