Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts

Lin, Weiyi; Shen, Hongyao; Xu, Guanhua; Zhang, Linchu; Fu, Jianzhong; Deng, Xiaolei

doi:10.1016/j.compositesa.2018.09.008

Title: Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts

Authors:

Lin, Weiyi;

; Xu, Guanhua; Zhang, Linchu; Fu, Jianzhong; Deng, Xiaolei

Publication Date:: 2018-12-01

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1636941

Grant/Contract Number:: 2018C01073

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Composites. Part A, Applied Science and Manufacturing

Additional Journal Information:: Journal Name: Composites. Part A, Applied Science and Manufacturing Journal Volume: 115 Journal Issue: C; Journal ID: ISSN 1359-835X

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Lin, Weiyi, Shen, Hongyao, Xu, Guanhua, Zhang, Linchu, Fu, Jianzhong, and Deng, Xiaolei. Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts.  United Kingdom: N. p., 2018. 
Web.  doi:10.1016/j.compositesa.2018.09.008.

Copy to clipboard


                    Lin, Weiyi, Shen, Hongyao, Xu, Guanhua, Zhang, Linchu, Fu, Jianzhong, & Deng, Xiaolei. Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts.  United Kingdom.  https://doi.org/10.1016/j.compositesa.2018.09.008

Copy to clipboard


                    Lin, Weiyi, Shen, Hongyao, Xu, Guanhua, Zhang, Linchu, Fu, Jianzhong, and Deng, Xiaolei. Sat .  
"Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts".  United Kingdom.  https://doi.org/10.1016/j.compositesa.2018.09.008.

Copy to clipboard


                    
@article{osti_1636941,

  title        = {Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts},

  author       = {Lin, Weiyi and Shen, Hongyao and Xu, Guanhua and Zhang, Linchu and Fu, Jianzhong and Deng, Xiaolei},

  abstractNote = {},

  doi          = {10.1016/j.compositesa.2018.09.008},

  journal      = {Composites. Part A, Applied Science and Manufacturing},

  number       = C,

  volume       = 115,

  place        = {United Kingdom},

  year         = {2018},

  month        = {12}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.compositesa.2018.09.008

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
journal, July 2018

Yin, Jun; Lu, Chaohua; Fu, Jianzhong
Materials & Design, Vol. 150
DOI: 10.1016/j.matdes.2018.04.029

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
journal, June 2017

Sweeney, Charles B.; Lackey, Blake A.; Pospisil, Martin J.
Science Advances, Vol. 3, Issue 6
DOI: 10.1126/sciadv.1700262

Effect of processing conditions on the bonding quality of FDM polymer filaments
journal, March 2008

Sun, Q.; Rizvi, G. M.; Bellehumeur, C. T.
Rapid Prototyping Journal, Vol. 14, Issue 2
DOI: 10.1108/13552540810862028

Multi-material, multi-technology FDM: exploring build process variations
journal, April 2014

Espalin, David; Alberto Ramirez, Jorge; Medina, Francisco
Rapid Prototyping Journal, Vol. 20, Issue 3
DOI: 10.1108/RPJ-12-2012-0112

Optimum part deposition orientation in fused deposition modeling
journal, May 2004

Thrimurthulu, K.; Pandey, Pulak M.; Venkata Reddy, N.
International Journal of Machine Tools and Manufacture, Vol. 44, Issue 6
DOI: 10.1016/j.ijmachtools.2003.12.004

Digital material fabrication using mask‐image‐projection‐based stereolithography
journal, April 2013

Zhou, Chi; Chen, Yong; Yang, Zhigang
Rapid Prototyping Journal, Vol. 19, Issue 3
DOI: 10.1108/13552541311312148

Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures
journal, June 2017

Lara-Padilla, Hernan; Mendoza-Buenrostro, Christian; Cardenas, Diego
Materials, Vol. 10, Issue 6
DOI: 10.3390/ma10060640

Critical parameters influencing the quality of prototypes in fused deposition modelling
journal, December 2001

Anitha, R.; Arunachalam, S.; Radhakrishnan, P.
Journal of Materials Processing Technology, Vol. 118, Issue 1-3
DOI: 10.1016/S0924-0136(01)00980-3

Multiple material additive manufacturing – Part 1: a review: This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
journal, March 2013

Vaezi, Mohammad; Chianrabutra, Srisit; Mellor, Brian
Virtual and Physical Prototyping, Vol. 8, Issue 1
DOI: 10.1080/17452759.2013.778175

Optimization of rapid prototyping parameters for production of flexible ABS object
journal, October 2005

Lee, B. H.; Abdullah, J.; Khan, Z. A.
Journal of Materials Processing Technology, Vol. 169, Issue 1
DOI: 10.1016/j.jmatprotec.2005.02.259

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
journal, July 2016

Ning, Fuda; Cong, Weilong; Hu, Yingbin
Journal of Composite Materials, Vol. 51, Issue 4
DOI: 10.1177/0021998316646169

Additive manufacturing of multi-material structures
journal, July 2018

Bandyopadhyay, Amit; Heer, Bryan
Materials Science and Engineering: R: Reports, Vol. 129
DOI: 10.1016/j.mser.2018.04.001

An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing
journal, October 2016

Ravi, Abinesh Kurapatti; Deshpande, Anagh; Hsu, Keng H.
Journal of Manufacturing Processes, Vol. 24
DOI: 10.1016/j.jmapro.2016.08.007

Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
journal, June 2017

Chacón, J. M.; Caminero, M. A.; García-Plaza, E.
Materials & Design, Vol. 124
DOI: 10.1016/j.matdes.2017.03.065

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
journal, September 2015

Wu, Wenzheng; Geng, Peng; Li, Guiwei
Materials, Vol. 8, Issue 9
DOI: 10.3390/ma8095271

Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
journal, April 2014

Rayegani, Farzad; Onwubolu, Godfrey C.
The International Journal of Advanced Manufacturing Technology, Vol. 73, Issue 1-4
DOI: 10.1007/s00170-014-5835-2

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
journal, September 2016

Tian, Xiaoyong; Liu, Tengfei; Yang, Chuncheng
Composites Part A: Applied Science and Manufacturing, Vol. 88
DOI: 10.1016/j.compositesa.2016.05.032

Similar Records in DOE PAGES and OSTI.GOV collections:

A chemical approach for the future of PLA upcycling: from plastic wastes to new 3D printing materials

Journal Article Shao, Lin ; Chang, Yu-Chung ; Hao, Cheng ; ... - Green Chemistry

Chemical upcycling of PLA: Ethanolamine cleaves polylactic acid to high purity N -LEA. N -LEA reacts with methacrylic anhydride (MAh) yielding crosslinkable DME. Simply combine DME with reactive diluent and photo-initiator to form a 3D printing resin.
https://doi.org/10.1039/D2GC01745H
Tensile properties of 3D-printed wood-filled PLA materials using poplar trees

Journal Article Bhagia, Samarthya ; Lowden, Richard R. ; Erdman, Donald ; ... - Applied Materials Today

Fabrication of renewable materials through additive manufacturing using wood-filled polylactic acid (PLA) is an emerging field of study. The variability in the tensile properties of 3D-printed materials due to the variability in woody biomass properties has not been studied. Biomass size reduction, filament extrusion, and 3D-printing methods were investigated to determine the conditions that resulted in consistent printing. Using 20% ball-milled poplar reinforcement in PLA, 210 °C filament extrusion temperature and 230 °C printing temperature were found to be the best conditions. Subsequently, seventy poplar samples from a common garden were used to test the tensile properties of the printedmore »« less
https://doi.org/10.1016/j.apmt.2020.100832

Full Text Available
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries

Journal Article Bhagia, Samarthya ; Bornani, Kamlesh ; Agrawal, Ruchi ; ... - Applied Materials Today

3D printing by fused deposition modeling (FDM) is an advanced additive manufacturing technology for making thermoplastic-based structures. Several studies have recently investigated 3D printing of polylactic acid (PLA) with biomass resources like cellulose, hemicellulose, lignin and whole biomass. Such biodegradable composites are better for the environment and can be used to replace non-biodegradable composites in a variety of applications. Therefore, a deep understanding of printing such biocomposites is needed for supporting such manufacturing. Recent developments focused on FDM printing of PLA filled with biomass resources have been critically reviewed to reveal the intricate aspects of manufacturing of such materials andmore »« less
https://doi.org/10.1016/j.apmt.2021.101078
Functional Filaments: Creating and Degrading pH-Indicating PLA Filaments for 3D Printing

Journal Article Legett, Shelbie A. ; Stockdale, John R. ; Torres, Xavier ; ... - Polymers

With the rapid pace of advancements in additive manufacturing and techniques such as fused filament fabrication (FFF), the feedstocks used in these techniques should advance as well. While available filaments can be used to print highly customizable parts, the creation of the end part is often the only function of a given feedstock. In this study, novel FFF filaments with inherent environmental sensing functionalities were created by melt-blending poly(lactic acid) (PLA), poly(ethylene glycol) (PEG), and pH indicator powders (bromothymol blue, phenolphthalein, and thymol blue). The new PLA-PEG-indicator filaments were universally more crystalline than the PLA-only filaments (33–41% vs. 19% crystallinity),more »« less
https://doi.org/10.3390/polym15020436
Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts

Journal Article Yang, Leipeng ; Li, Shujuan ; Li, Yan ; ... - Journal of Materials Engineering and Performance

Fused deposition modeling (FDM) has become one of the most extensively used additive manufacturing technologies in recent years because of its wide adaptability, simple mechanism and low cost. It is difficult, however, to achieve an equitable trade-off among mechanical properties, surface finish quality and production time, which is an area seldom explored. This paper concentrates on the optimization of the parameters to achieve higher tensile strength and lower surface roughness with less build time during the FDM process based on central composite design for the tensile specimen forming process. The effects of five extrusion parameters (nozzle diameter, liquefier temperature, extrusionmore »« less
https://doi.org/10.1007/S11665-018-3784-X

Similar Records

Title: Single-layer temperature-adjusting transition method to improve the bond strength of 3D-printed PCL/PLA parts

Citation Formats

Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion journal, July 2018

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating journal, June 2017

Effect of processing conditions on the bonding quality of FDM polymer filaments journal, March 2008

Multi-material, multi-technology FDM: exploring build process variations journal, April 2014

Optimum part deposition orientation in fused deposition modeling journal, May 2004

Digital material fabrication using mask‐image‐projection‐based stereolithography journal, April 2013

Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures journal, June 2017

Critical parameters influencing the quality of prototypes in fused deposition modelling journal, December 2001

Multiple material additive manufacturing – Part 1: a review: This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials journal, March 2013

Optimization of rapid prototyping parameters for production of flexible ABS object journal, October 2005

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties journal, July 2016

Additive manufacturing of multi-material structures journal, July 2018

An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing journal, October 2016

Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection journal, June 2017

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS journal, September 2015

Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE) journal, April 2014

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites journal, September 2016

Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion
journal, July 2018

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating
journal, June 2017

Effect of processing conditions on the bonding quality of FDM polymer filaments
journal, March 2008

Multi-material, multi-technology FDM: exploring build process variations
journal, April 2014

Optimum part deposition orientation in fused deposition modeling
journal, May 2004

Digital material fabrication using mask‐image‐projection‐based stereolithography
journal, April 2013

Influence of Controlled Cooling in Bimodal Scaffold Fabrication Using Polymers with Different Melting Temperatures
journal, June 2017

Critical parameters influencing the quality of prototypes in fused deposition modelling
journal, December 2001

Multiple material additive manufacturing – Part 1: a review: This review paper covers a decade of research on multiple material additive manufacturing technologies which can produce complex geometry parts with different materials
journal, March 2013

Optimization of rapid prototyping parameters for production of flexible ABS object
journal, October 2005

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
journal, July 2016

Additive manufacturing of multi-material structures
journal, July 2018

An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing
journal, October 2016

Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
journal, June 2017

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
journal, September 2015

Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
journal, April 2014

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
journal, September 2016