Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

Li, X.; Zhang, C. H.; Zhang, S.; Wu, C. L.; Liu, Y.; Zhang, J. B.; Babar Shahzad, M.

doi:10.1016/j.optlastec.2019.02.001

Title: Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

Journal Article · 01 June 2019 · Optics and Laser Technology

DOI: https://doi.org/10.1016/j.optlastec.2019.02.001 · OSTI ID:1636085

Li, X.; Zhang, C. H.; Zhang, S.; Wu, C. L.; Liu, Y.; Zhang, J. B.; Babar Shahzad, M.

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

Grant/Contract Number:: 2016YFB1100204

OSTI ID:: 1636085

Journal Information:: Optics and Laser Technology, Journal Name: Optics and Laser Technology Vol. 114 Journal Issue: C; ISSN 0030-3992

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (41)

Microstructure and properties of Ti/TiBCN coating on 7075 aluminum alloy by laser cladding Li, Yuxin; Zhang, Pengfei; Bai, Peikang Surface and Coatings Technology, Vol. 334 https://doi.org/10.1016/j.surfcoat.2017.11.034	journal	January 2018
Development and characterization of laser surface cladding (Ti,W)C reinforced Ni–30Cu alloy composite coating on copper Yan, Hua; Zhang, Peilei; Yu, Zhishui Optics & Laser Technology, Vol. 44, Issue 5 https://doi.org/10.1016/j.optlastec.2011.12.031	journal	July 2012
A comparative study on the tribological behaviors of nitrided and sulfur-nitrided 35CrMo steel lubricated in PAO base oil with MoDTC additive Yue, Wen; Sun, Xuejie; Wang, Chengbiao Tribology International, Vol. 44, Issue 12 https://doi.org/10.1016/j.triboint.2011.08.017	journal	November 2011
Effect of Ni content on stainless steel fabricated by laser melting deposition Zhang, H.; Zhang, C. H.; Wang, Q. Optics & Laser Technology, Vol. 101 https://doi.org/10.1016/j.optlastec.2017.11.032	journal	May 2018
Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy for the improvement of bioactivity Wu, Y.; Wang, A. H.; Zhang, Z. Applied Surface Science, Vol. 305 https://doi.org/10.1016/j.apsusc.2014.02.140	journal	June 2014
Pressureless sintered SiC matrix toughened by in situ synthesized TiB2: Process conditions and fracture toughness Wang, Wei; Lian, Jingbao; Ru, Hongqiang Ceramics International, Vol. 38, Issue 3 https://doi.org/10.1016/j.ceramint.2011.10.045	journal	April 2012
Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding Lei, Jianbo; Shi, Chuan; Zhou, Shengfeng Surface and Coatings Technology, Vol. 334 https://doi.org/10.1016/j.surfcoat.2017.11.051	journal	January 2018
Effect of Ti on the microstructure evolution and wear behavior of VN alloy/Co-based composite coatings by laser cladding Ding, Lin; Hu, Shengsun; Quan, Xiumin Journal of Materials Processing Technology, Vol. 252 https://doi.org/10.1016/j.jmatprotec.2017.10.042	journal	February 2018
Plastic Deformation Behavior and Processing Maps of 35CrMo Steel Xiao, Zheng-bing; Huang, Yuan-chun; Liu, Yu Journal of Materials Engineering and Performance, Vol. 25, Issue 3 https://doi.org/10.1007/s11665-016-1933-7	journal	February 2016
Ti ₃ SiC ₂ friction material prepared by novel method of infiltration sintering Xiao, Q. D.; Zhou, F.; Wu, S. Advances in Applied Ceramics, Vol. 116, Issue 1 https://doi.org/10.1080/17436753.2016.1201883	journal	June 2016
A parametric study on laser cladding of Ti-6Al-4V wire and WC/W2C powder Farayibi, P. K.; Abioye, T. E.; Clare, A. T. The International Journal of Advanced Manufacturing Technology, Vol. 87, Issue 9-12 https://doi.org/10.1007/s00170-016-8743-9	journal	April 2016
Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel Shi, Yan; Li, Yunfeng; Liu, Jia Optics & Laser Technology, Vol. 99 https://doi.org/10.1016/j.optlastec.2017.09.010	journal	February 2018
Studies on wears of ultrafine-grained ceramic tool and common ceramic tool during hard turning using Archard wear model Hu, H-J; Huang, W-J The International Journal of Advanced Manufacturing Technology, Vol. 69, Issue 1-4 https://doi.org/10.1007/s00170-013-5003-0	journal	April 2013
Time-dependent ratcheting of 35CrMo structural steel at elevated temperature considering stress rates Wang, Wei; Zheng, Xiaotao; Yu, Jiuyang Materials at High Temperatures, Vol. 34, Issue 3 https://doi.org/10.1080/09603409.2016.1261511	journal	November 2016
Friction and wear behavior of NiAl–10wt%Ti3SiC2 composites Shi, Xiaoliang; Wang, Mang; Zhai, Wenzheng Wear, Vol. 303, Issue 1-2 https://doi.org/10.1016/j.wear.2013.02.013	journal	June 2013
High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy Jang, Min Ji; Praveen, S.; Sung, Hyun Je Journal of Alloys and Compounds, Vol. 730 https://doi.org/10.1016/j.jallcom.2017.09.293	journal	January 2018
Effect of heat treatment on the microstructure and properties of VN alloy/Co-based composite coatings Ding, Lin; Hu, Shengsun; Quan, Xiumin Surface and Coatings Technology, Vol. 313 https://doi.org/10.1016/j.surfcoat.2017.01.102	journal	March 2017
Formation of surface layer based on Al3Ti on aluminum by laser cladding and its compatibility with ceramics Uenishi, Keisuke; Kobayashi, Kojiro F. Intermetallics, Vol. 7, Issue 5 https://doi.org/10.1016/S0966-9795(98)00071-5	journal	May 1999
Microstructure and mechanical properties of in-situ hot pressed (TiB ₂ + SiC)/Ti ₃ SiC ₂ composites with tunable TiB ₂ content Zou, Wenjie; Li, Fangzhi; Zhang, Haibin Advances in Applied Ceramics, Vol. 115, Issue 5 https://doi.org/10.1080/17436753.2016.1138580	journal	February 2016
Microstructure and wear behavior of stellite 6 cladding on 17-4 PH stainless steel Gholipour, A.; Shamanian, M.; Ashrafizadeh, F. Journal of Alloys and Compounds, Vol. 509, Issue 14 https://doi.org/10.1016/j.jallcom.2010.09.216	journal	April 2011
Effect of hot cross rolling on the microstructure and mechanical properties of an Fe-14Cr ODS ferritic steel Macías-Delgado, J.; Leguey, T.; de Castro, V. Materials Science and Engineering: A, Vol. 711 https://doi.org/10.1016/j.msea.2017.11.067	journal	January 2018
Microstructure and wear property of the Ti 5 Si 3 /TiC reinforced Co-based coatings fabricated by laser cladding on Ti-6Al-4V Weng, Fei; Yu, Huijun; Liu, Jianli Optics & Laser Technology, Vol. 92 https://doi.org/10.1016/j.optlastec.2017.01.014	journal	July 2017
Microstructures and wear properties of laser cladding Co-based composite coatings on Ti–6Al–4V Weng, Fei; Yu, Huijun; Chen, Chuanzhong Materials & Design, Vol. 80 https://doi.org/10.1016/j.matdes.2015.05.005	journal	September 2015
Formation mechanism and control methods of inhomogeneous deformation during hot rough rolling of aluminum alloy plate Hao, Pujun; He, Anrui; Sun, Wenquan Archives of Civil and Mechanical Engineering, Vol. 18, Issue 1 https://doi.org/10.1016/j.acme.2017.07.004	journal	January 2018
Phase evolution characteristics and corrosion behavior of FeCoCrAlCu-X 0.5 coatings on cp Cu by laser high-entropy alloying Wu, C. L.; Zhang, S.; Zhang, C. H. Optics & Laser Technology, Vol. 94 https://doi.org/10.1016/j.optlastec.2017.03.023	journal	September 2017
Wear resistance mechanisms of near-nanostructured WC-Co coatings Wang, Haibin; Hou, Chao; Liu, Xuemei International Journal of Refractory Metals and Hard Materials, Vol. 71 https://doi.org/10.1016/j.ijrmhm.2017.11.013	journal	February 2018
Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process Pazhouhanfar, Y.; Eghbali, B. Materials Science and Engineering: A, Vol. 710 https://doi.org/10.1016/j.msea.2017.10.087	journal	January 2018
Microstructure and interfacial evaluation of Co-based alloy coating on copper by pulsed Nd:YAG multilayer laser cladding Yan, Hua; Wang, Aihua; Xu, Kaidong Journal of Alloys and Compounds, Vol. 505, Issue 2 https://doi.org/10.1016/j.jallcom.2010.06.099	journal	September 2010
Microstructure and wear resistance of laser-cladded Ni-based composite coatings on downhole tools Sui, Yiyong; Yang, Fan; Qin, Guoliang Journal of Materials Processing Technology, Vol. 252 https://doi.org/10.1016/j.jmatprotec.2017.09.028	journal	February 2018
Microstructure and Wear Resistance of Laser Cladding Co-Based Superalloy Coating [激光熔覆Co基高温合金涂层的显微组织与耐磨性能研究] Feng Shuqiang, 冯树强; Li Baoling, 李宝玲; Li Chunqing, 李春青 Applied laser, Vol. 31, Issue 6 https://doi.org/10.3788/AL20113106.0447	journal	January 2011
Laser-assisted selective fusing of thermal sprayed Ni-based self-fluxing alloys by using high-power diode lasers Chun, Eun-Joon; Kim, Min-Su; Nishikawa, Hiroshi Optics & Laser Technology, Vol. 100 https://doi.org/10.1016/j.optlastec.2017.10.021	journal	March 2018
Phase evolution and wear resistance of in situ synthesized V8C7 particles reinforced Fe-based coating by laser cladding Wang, C.; Zhang, S.; Zhang, C. H. Optics & Laser Technology, Vol. 105 https://doi.org/10.1016/j.optlastec.2018.02.019	journal	September 2018
Influence of Ti3SiC2 content on tribological properties of NiAl matrix self-lubricating composites Shi, Xiaoliang; Wang, Mang; Zhai, Wenzheng Materials & Design, Vol. 45 https://doi.org/10.1016/j.matdes.2012.08.060	journal	March 2013
Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold Yan, Hua; Zhang, Jie; Zhang, Peilei Surface and Coatings Technology, Vol. 232 https://doi.org/10.1016/j.surfcoat.2013.05.036	journal	October 2013
Laser surface alloying of FeCoCrAlNi high-entropy alloy on 304 stainless steel to enhance corrosion and cavitation erosion resistance Zhang, S.; Wu, C. L.; Zhang, C. H. Optics & Laser Technology, Vol. 84 https://doi.org/10.1016/j.optlastec.2016.04.011	journal	October 2016
Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings Ding, Lin; Hu, Shengsun; Quan, Xiumin Journal of Alloys and Compounds, Vol. 659 https://doi.org/10.1016/j.jallcom.2015.11.036	journal	February 2016
Design of friction and wear resistant titanium- and cobalt-modified nickel-base repair alloys by spray forming Yin, Hangboce; Xu, Yi; Li, Xinggang Materials & Design, Vol. 116 https://doi.org/10.1016/j.matdes.2016.12.024	journal	February 2017
Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: Microstructure and wear performance Hu, Yingbin; Ning, Fuda; Wang, Hui Optics & Laser Technology, Vol. 99 https://doi.org/10.1016/j.optlastec.2017.08.032	journal	February 2018
In situ synthesis of TiC reinforced surface MMC on Al6061 by laser surface alloying Man, H. C.; Zhang, S.; Cheng, F. T. Scripta Materialia, Vol. 46, Issue 3 https://doi.org/10.1016/S1359-6462(01)01230-1	journal	February 2002
Research status of laser cladding on titanium and its alloys: A review Weng, Fei; Chen, Chuanzhong; Yu, Huijun Materials & Design, Vol. 58 https://doi.org/10.1016/j.matdes.2014.01.077	journal	June 2014
Theoretical and experimental investigation of thermal and oxidation behaviours of a high speed steel work roll during hot rolling Deng, G. Y.; Zhu, H. T.; Tieu, A. K. International Journal of Mechanical Sciences, Vol. 131-132 https://doi.org/10.1016/j.ijmecsci.2017.08.024	journal	October 2017

Similar Records

Microstructure of bonding zones in laser-clad Ni-alloy-based composite coatings reinforced with various ceramic powders

Journal Article · 1996 · Metallurgical Transactions, A · OSTI ID:207689

Pei, Y T; Ouyang, J H; Lei, T C

Effect of rare earth cerium on microstructure and wear-resistance of nickel-base alloy laser cladded coating

Book · 1996 · OSTI ID:536352

Qingbo, Zhang; Kunlin, Wang; Manlong, Sun; +1 more

Laser cladding of wear resistant Cu-base coatings on cast Al-Si alloys

Conference · 1996 · OSTI ID:535603

Kelly, J; Nagarathnam, K; Mazumder, J

Title: Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology

Citation Formats

References (41)

Similar Records

Related Subjects