Design and performance of an additively manufactured high-Si transformer core

Plotkowski, A.; Carver, K.; List, F.; Pries, J.; Li, Z.; Rossy, A. Marques; Leonard, D.

doi:10.1016/j.matdes.2020.108894

Title: Design and performance of an additively manufactured high-Si transformer core

Journal Article · 31 August 2020 · Materials & Design

DOI: https://doi.org/10.1016/j.matdes.2020.108894 · OSTI ID:1633923

; Carver, K.; List, F.; Pries, J.; Li, Z.; Rossy, A. Marques; Leonard, D.

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE); USDOE Office of Electricity (OE)

OSTI ID:: 1633923

Alternate ID(s):: OSTI ID: 1649242

Journal Information:: Materials & Design, Journal Name: Materials & Design Journal Issue: C Vol. 194; ISSN 0264-1275

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (35)

Study of order-disorder effect on magnetic properties of rapidly quenched Fe-6.5 wt% Si alloys Faudot, F.; Rialland, J. F.; Bigot, J. Physica Scripta, Vol. 39, Issue 2 https://doi.org/10.1088/0031-8949/39/2/013	journal	February 1989
Relationship between laser energy input, microstructures and magnetic properties of selective laser melted Fe-6.9%wt Si soft magnets Garibaldi, M.; Ashcroft, I.; Hillier, N. Materials Characterization, Vol. 143 https://doi.org/10.1016/j.matchar.2018.01.016	journal	September 2018
Influence of Primary-Recrystallization Texture on Selective Growth of Goss Grains [Goss方位粒の選択成長性に及ぼす一次再結晶集合組織の影響] Omura, Takeshi; Hayakawa, Yasuyuki Journal of the Japan Institute of Metals, Vol. 75, Issue 9 https://doi.org/10.2320/jinstmet.75.485	journal	January 2011
Texture control during laser deposition of nickel-based superalloy Dinda, G. P.; Dasgupta, A. K.; Mazumder, J. Scripta Materialia, Vol. 67, Issue 5 https://doi.org/10.1016/j.scriptamat.2012.06.014	journal	September 2012
Metallurgy of high-silicon steel parts produced using Selective Laser Melting Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco Acta Materialia, Vol. 110 https://doi.org/10.1016/j.actamat.2016.03.037	journal	May 2016
On predicting the extent of magnetic aging in electrical steels Ray, Santanu Kumar; Mohanty, Omkar Nath Journal of Magnetism and Magnetic Materials, Vol. 78, Issue 2 https://doi.org/10.1016/0304-8853(89)90276-X	journal	February 1989
Commercial scale production of Fe‐6.5 wt. % Si sheet and its magnetic properties Takada, Y.; Abe, M.; Masuda, S. Journal of Applied Physics, Vol. 64, Issue 10 https://doi.org/10.1063/1.342373	journal	November 1988
Free-Form Design of Electrical Machine Rotor Cores for Production Using Additive Manufacturing Garibaldi, Michele; Gerada, Christopher; Ashcroft, Ian Journal of Mechanical Design, Vol. 141, Issue 7 https://doi.org/10.1115/1.4042621	journal	March 2019
Metallographic and magnetic analysis of direct laser sintered soft magnetic composites Kocsis, B.; Fekete, I.; Varga, L. K. Journal of Magnetism and Magnetic Materials, Vol. 501 https://doi.org/10.1016/j.jmmm.2020.166425	journal	May 2020
Texture Development in High-Silicon Iron Sheet Produced by Simple Shear Deformation Kustas, Andrew B.; Sagapuram, Dinakar; Trumble, Kevin P. Metallurgical and Materials Transactions A, Vol. 47, Issue 6 https://doi.org/10.1007/s11661-016-3437-3	journal	March 2016
Tuning the phase stability and magnetic properties of laser additively processed Fe-30at%Ni soft magnetic alloys Mikler, C. V.; Chaudhary, V.; Soni, V. Materials Letters, Vol. 199 https://doi.org/10.1016/j.matlet.2017.04.054	journal	July 2017
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting Scipioni Bertoli, Umberto; Wolfer, Alexander J.; Matthews, Manyalibo J. Materials & Design, Vol. 113 https://doi.org/10.1016/j.matdes.2016.10.037	journal	January 2017
Rapidly solidified Si-Fe alloys Cunha, M. A.; Johnson, G. W. Journal of Materials Science, Vol. 25, Issue 5 https://doi.org/10.1007/BF00638046	journal	May 1990
Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing Garibaldi, M.; Ashcroft, I.; Lemke, J. N. Scripta Materialia, Vol. 142 https://doi.org/10.1016/j.scriptamat.2017.08.042	journal	January 2018
Improvement of magnetic properties of an Fe–6.5wt.% Si alloy by directional solidification Fu, Huadong; Zhang, Zhihao; Jiang, Yanbin Materials Letters, Vol. 65, Issue 9 https://doi.org/10.1016/j.matlet.2011.02.020	journal	May 2011
Localized Changes of Stainless Steel Powder Characteristics During Selective Laser Melting Additive Manufacturing Galicki, D.; List, F.; Babu, S. S. Metallurgical and Materials Transactions A, Vol. 50, Issue 3 https://doi.org/10.1007/s11661-018-5072-7	journal	January 2019
Laser Additive Manufacturing of Magnetic Materials Mikler, C. V.; Chaudhary, V.; Borkar, T. JOM, Vol. 69, Issue 3 https://doi.org/10.1007/s11837-017-2257-2	journal	January 2017
Iron and silicon-iron alloys Littmann, M. IEEE Transactions on Magnetics, Vol. 7, Issue 1 https://doi.org/10.1109/TMAG.1971.1066998	journal	March 1971
Microstructure and Magnetic Properties of Fe–Ni Alloy Fabricated by Selective Laser Melting Fe/Ni Mixed Powders Zhang, Baicheng; Fenineche, Nour-Eddine; Liao, Hanlin Journal of Materials Science & Technology, Vol. 29, Issue 8 https://doi.org/10.1016/j.jmst.2013.05.001	journal	August 2013
Magnetic properties of commercially produced Fe-6.5wt% Si sheet Abe, M.; Takada, Y.; Murakami, T. Journal of Materials Engineering, Vol. 11, Issue 1 https://doi.org/10.1007/BF02833761	journal	March 1989
The B 2 and D O ₃ Ordering Reactions in Iron–Silicon Alloys in the Vicinity of the Curie Temperature Swann, P. R.; Grånäs, L.; Lehtinen, B. Metal Science, Vol. 9, Issue 1 https://doi.org/10.1179/030634575790445279	journal	January 1975
A review of ordering phenomena in iron-silicon alloys [A review of ordering phenomena in iron-silicon alloys] González, F.; Houbaert, Y. Revista de Metalurgia, Vol. 49, Issue 3 https://doi.org/10.3989/revmetalm.1223	journal	June 2013
Site specific control of crystallographic grain orientation through electron beam additive manufacturing Dehoff, R. R.; Kirka, M. M.; Sames, W. J. Materials Science and Technology, Vol. 31, Issue 8 https://doi.org/10.1179/1743284714Y.0000000734	journal	November 2014
Overview no. 62 Rios, P. R. Acta Metallurgica, Vol. 35, Issue 12 https://doi.org/10.1016/0001-6160(87)90280-X	journal	December 1987
The pinning by particles of low and high angle grain boundaries during grain growth Tweed, C. J.; Ralph, B.; Hansen, N. Acta Metallurgica, Vol. 32, Issue 9 https://doi.org/10.1016/0001-6160(84)90086-5	journal	September 1984
Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM Lemke, J. N.; Simonelli, M.; Garibaldi, M. Journal of Alloys and Compounds, Vol. 722 https://doi.org/10.1016/j.jallcom.2017.06.085	journal	October 2017
Influence of alloy elements on the plasticity of high-silicon iron Glezer, A. M.; Maleeva, I. V.; Zakharov, A. I. Metal Science and Heat Treatment, Vol. 27, Issue 12 https://doi.org/10.1007/BF00700099	journal	December 1985
Magnetic aging anisotropy of a semi-processed non-oriented electrical steel Marra, K. M.; Alvarenga, E. A.; Buono, V. T. L. Materials Science and Engineering: A, Vol. 390, Issue 1-2 https://doi.org/10.1016/j.msea.2004.08.066	journal	January 2005
Precipitates in electrical steels Jenkins, Keith; Lindenmo, Magnus Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20 https://doi.org/10.1016/j.jmmm.2008.03.062	journal	October 2008
Particle pinning force thresholds for promoting abnormal grain growth in magnetostrictive Fe–Ga alloy sheets Na, Suok-Min; Atwater, Katherine M.; Flatau, Alison B. Scripta Materialia, Vol. 100 https://doi.org/10.1016/j.scriptamat.2014.11.027	journal	April 2015
Consequences of magnetic aging for iron losses in electrical steels de Campos, Marcos F.; Emura, Marília; Landgraf, Fernando J. G. Journal of Magnetism and Magnetic Materials, Vol. 304, Issue 2 https://doi.org/10.1016/j.jmmm.2006.02.185	journal	September 2006
Achieving high strength and ductility in traditionally brittle soft magnetic intermetallics via additive manufacturing Babuska, Tomas F.; Wilson, Mark A.; Johnson, Kyle L. Acta Materialia, Vol. 180 https://doi.org/10.1016/j.actamat.2019.08.044	journal	November 2019
Effect of nickel and manganese addition on ductility and magnetic properties of 6.5% silicon-iron alloy Narita, K.; Enokizono, M. IEEE Transactions on Magnetics, Vol. 14, Issue 4 https://doi.org/10.1109/TMAG.1978.1059756	journal	July 1978
Laser additive processing of Ni-Fe-V and Ni-Fe-Mo Permalloys: Microstructure and magnetic properties Mikler, C. V.; Chaudhary, V.; Borkar, T. Materials Letters, Vol. 192 https://doi.org/10.1016/j.matlet.2017.01.059	journal	April 2017
Bulk Combinatorial Synthesis and High Throughput Characterization for Rapid Assessment of Magnetic Materials: Application of Laser Engineered Net Shaping (LENS™) Geng, J.; Nlebedim, I. C.; Besser, M. F. JOM, Vol. 68, Issue 7 https://doi.org/10.1007/s11837-016-1918-x	journal	April 2016

Similar Records

Artificial intelligence-driven thermal design for additively manufactured reactor cores

Journal Article · 2022 · Nuclear Engineering and Design · OSTI ID:1960924

Popov, Emilian; Archibald, Richard; Hiscox, Briana; +1 more

Two-step deformation-induced martensitic transformation in additively manufactured High-Si stainless steel

Journal Article · 2022 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1901637

Bibhanshu, Nitish; Gussev, Maxim N.; Byun, Thak Sang

Transformational Challenge Reactor – On the Application of Design for Additive Manufacturing (DfAM) Techniques to the Conception of Nuclear Core

Technical Report · 2022 · OSTI ID:1861083

Bergeron, Aurelien; Talamo, Alberto; Vegendla, Prasad; +1 more

Title: Design and performance of an additively manufactured high-Si transformer core

Citation Formats

References (35)

Similar Records

Related Subjects