Title: A predictive 0-D HCCI combustion model for ethanol, natural gas, gasoline, and primary reference fuel blends

Journal Article · · Fuel

Homogeneous Charge Compression Ignition (HCCI) is a promising advanced combustion concept with high thermal efficiency and low exhaust emissions. This work purposes a computationally-efficient, zero-dimensional (0-D) HCCI combustion model that does not need to solve any differential equations. To develop the burn rate correlations, experimental HCCI data of ethanol, natural gas, E10-gasoline, and Primary Reference Fuel (PRF) blends was collected on a CFR engine. The burn rate model is built based on the individual cycle mass fraction burned (MFB) curves calculated from the experimental data. CA0 can be predicted from an ignition delay correlation. Once CA0 is known, CA50 and CA90 can be predicted based on CA0 and the charge-mass equivalence ratio Φ'. Then, with CA0, 50 and 90 known, a Wiebe function can be constructed to represent the MFB curve and burn rate. For PRF blends, low-temperature and high-temperature heat releases (LTHR and HTHR) are modeled by two Wiebe functions with Φ' and PRF number dependence. The fitted model has high accuracy compared to the experimental data with R2 values generally greater than 0.97. Finally, various ignition delay correlations from the literature are also tested against the experimentally collected data and some modifications to the correlations are suggested.

Research Organization:
Aerodyne Research, Inc., Billerica, MA (United States); State University of New York (SUNY), Albany, NY (United States)
Sponsoring Organization:
USDOE Advanced Research Projects Agency - Energy (ARPA-E)
Grant/Contract Number:
AR0000602; EE0007216
OSTI ID:
1613662
Journal Information:
Fuel, Journal Name: Fuel Journal Issue: C Vol. 237; ISSN 0016-2361
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (28)

Fundamental features of hydrocarbon autoignition in a rapid compression machine journal November 1993
A rapid compression machine investigation of oxidation and auto-ignition of n-Heptane: Measurements and modeling journal August 1995
Ignition delay characteristics of methane fuels journal January 1994
Correlation of autoignition phenomena in internal combustion engines and rapid compression machines journal January 1955
Understanding the effect of operating conditions on thermal stratification and heat release in a homogeneous charge compression ignition engine journal February 2017
An experimental and modeling study of iso-octane ignition delay times under homogeneous charge compression ignition conditions journal August 2005
Examination of combustion characteristics and phasing strategies of a natural gas HCCI engine journal January 2005
A fundamental study on the control of the HCCI combustion and emissions by fuel design concept combined with controllable EGR. Part 1. The basic characteristics of HCCI combustion journal June 2005
Development and calibration of a reduced chemical kinetic model of n-heptane for HCCI engine combustion journal June 2005
A chemical kinetics model of iso-octane oxidation for HCCI engines journal December 2006
Experimental study on the auto-ignition and combustion characteristics in the homogeneous charge compression ignition (HCCI) combustion operation with ethanol/n-heptane blend fuels by port injection journal December 2006
Numerical study on the chemical reaction kinetics of n-heptane for HCCI combustion process journal December 2006
Development of an integrated reduced fuel oxidation and soot precursor formation mechanism for CFD simulations of diesel combustion journal September 2011
A parametric investigation of HCCI combustion to reduce emissions and improve efficiency using a CFD model approach journal April 2013
Influences of second injection variations on combustion and emissions of an HCCI-DI engine: Experiments and CFD modelling journal November 2014
CFD simulations using the TDAC method to model iso-octane combustion for a large range of ozone seeding and temperature conditions in a single cylinder HCCI engine journal December 2014
Improved combustion kinetic model and HCCI engine simulations of di-isopropyl ketone ignition journal January 2016
A phenomenological HCCI combustion model in 0D and 3D-CFD journal August 2018
Dimethyl ether autoignition in a rapid compression machine: Experiments and chemical kinetic modeling journal December 2008
Autoignition of gasoline and its surrogates in a rapid compression machine journal January 2013
Nonlinear Observer-Based Control of Load Transitions in Homogeneous Charge Compression Ignition Engines journal May 2007
Dynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation
  • Shaver, Gregory M.; Gerdes, J. Christian; Roelle, Matthew J.
  • Journal of Dynamic Systems, Measurement, and Control, Vol. 127, Issue 3 https://doi.org/10.1115/1.1979511
journal July 2004
Physics Based Control Oriented Model for HCCI Combustion Timing journal February 2010
Development of a Postprocessing Methodology for Studying Thermal Stratification in an HCCI Engine journal August 2012
A Linear Least-Squares Algorithm for Double-Wiebe Functions Applied to Spark-Assisted Compression Ignition journal May 2014
Fast Computation of Combustion Phasing and Its Influence on Classifying Random or Deterministic Patterns journal May 2016
A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition engines journal October 2005
The Development of an Ignition Delay Correlation for PRF Fuel Blends from PRF0 (n-Heptane) to PRF100 (iso-Octane) journal April 2016