DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices

Journal Article · · Nanotechnology
ORCiD logo [1]; ORCiD logo [1];  [1];  [1];  [1];  [2];  [3]
  1. Univ. of Newcastle, Callaghan, NSW (Australia)
  2. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Advanced Light Source (ALS)
  3. Univ. of Newcastle, Callaghan, NSW (Australia); Zhejiang Univ. of Technology, Hangzhou Shi (China)

Printed electronics is simultaneously one of the most intensely studied emerging research areas in science and technology and one of the fastest growing commercial markets in the world today. For the past decade the potential for organic electronic (OE) materials to revolutionize this printed electronics space has been widely promoted. Such conviction in the potential of these carbon-based semiconducting materials arises from their ability to be dissolved in solution, and thus the exciting possibility of simply printing a range of multifunctional devices onto flexible substrates at high speeds for very low cost using standard roll-to-roll printing techniques. However, the transition from promising laboratory innovations to large scale prototypes requires precise control of nanoscale material and device structure across large areas during printing fabrication. Maintaining this nanoscale material control during printing presents a significant new challenge that demands the coupling of OE materials and devices with clever nanoscience fabrication approaches that are adapted to the limited thermodynamic levers available. In this review we present an update on the strategies and capabilities that are required in order to manipulate the nanoscale structure of large area printed organic photovoltaic (OPV), transistor and bioelectronics devices in order to control their device functionality. This discussion covers a range of efforts to manipulate the electroactive ink materials and their nanostructured assembly into devices, and also device processing strategies to tune the nanoscale material properties and assembly routes through printing fabrication. The review finishes by highlighting progress in printed OE devices that provide a feedback loop between laboratory nanoscience innovations and their feasibility in adapting to large scale printing fabrication. The ability to control material properties on the nanoscale whilst simultaneously printing functional devices on the square metre scale is prompting innovative developments in the targeted nanoscience required for OPV, transistor and biofunctional devices.

Research Organization:
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES)
Grant/Contract Number:
AC02-05CH11231
OSTI ID:
1605693
Journal Information:
Nanotechnology, Vol. 31, Issue 9; ISSN 0957-4484
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
United States
Language:
English

References (235)

Facile fabrication of paper-based silver nanostructure electrodes for flexible printed energy storage system journal August 2018
Overcoming the Scaling Lag for Polymer Solar Cells journal October 2017
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics journal August 2015
Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor journal March 2018
Solubility of Light Fullerenes in Organic Solvents journal January 2010
Helical microtubules of graphitic carbon journal November 1991
The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices journal February 2018
An electrochemical immunosensor for brain natriuretic peptide prepared with screen-printed carbon electrodes nanostructured with gold nanoparticles grafted through aryl diazonium salt chemistry journal March 2018
Surfactant-free nanoparticulate organic photovoltaics journal February 2014
Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials journal January 2016
Stability of polymeric thin film transistors for x-ray imaging applications journal October 2007
Following the nanostructural molecular orientation guidelines for sulfur versus thiophene units in small molecule photovoltaic cells journal January 2016
Conductive Nanomaterials for Printed Electronics journal January 2014
Organic transistors manufactured using inkjet technology with subfemtoliter accuracy journal March 2008
Tracing photoinduced electron transfer process in conjugated polymer/fullerene bulk heterojunctions in real time journal June 2001
Synthesis and characterization of polypyrrole using TiO 2 nanotube@poly(sodium styrene sulfonate) as dopant and template journal October 2014
Multiscale Active Layer Morphologies for Organic Photovoltaics Through Self-Assembly of Nanospheres journal August 2014
Printing Highly Efficient Organic Solar Cells journal September 2008
A Disposable paper breathalyzer with an alcohol sensing organic electrochemical transistor journal June 2016
All-organic optoelectronic sensor for pulse oximetry journal December 2014
Nanostructured graphene-based materials for flexible energy storage journal October 2017
Polyaniline, an electroactive polymer, supports adhesion and proliferation of cardiac myoblasts journal January 2006
Indirect X-ray Detectors Based on Inkjet-Printed Photodetectors with a Screen-Printed Scintillator Layer journal December 2017
Screen-printed organic electrochemical transistors for metabolite sensing journal July 2015
Organic thin-film transistors: A review of recent advances journal January 2001
Ultra-low voltage, organic thin film transistors fabricated on plastic substrates by a highly reproducible process journal February 2012
Continuous Flow Synthesis of Organic Electronic Materials – Case Studies in Methodology Translation and Scale-up journal January 2013
Morphological control and performance improvement of organic photovoltaic layer of roll-to-roll coated polymer solar cells journal June 2016
A large-area wireless power-transmission sheet using printed organic transistors and plastic MEMS switches journal April 2007
Studying Polymer/Fullerene Intermixing and Miscibility in Laterally Patterned Films with X-Ray Spectromicroscopy journal April 2012
Charge-retraction time-of-flight measurement for organic charge transport materials journal October 2007
3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients journal January 2018
Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime journal January 2014
Review of organic light-emitting diodes with thermally activated delayed fluorescence emitters for energy-efficient sustainable light sources and displays journal April 2016
A hybrid bioorganic interface for neuronal photoactivation journal January 2011
In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT:PCBM bulk heterojunction solar cells journal January 2011
Cellular nanotechnology: making biological interfaces smarter journal January 2013
The chemistry of functional nanomaterials journal January 2013
Controlled Synthesis and Energy Applications of One-Dimensional Conducting Polymer Nanostructures: An Overview journal December 2011
A low cost and high performance polymer donor material for polymer solar cells journal February 2018
Electric Field Effect in Atomically Thin Carbon Films journal October 2004
Morphology of polymer/fullerene bulk heterojunction solar cells journal January 2006
Inkjet Printing of Silver Nanowire Networks journal April 2015
Fully Roll-to-Roll Printed P3HT/Indene-C60-Bisadduct Modules with High Open-Circuit Voltage and Efficiency journal January 2018
Recent advances in 3D printing of biomaterials journal March 2015
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core journal April 2019
Bulk transport and contact limitation of MoS 2 multilayer flake transistors untangled via temperature-dependent transport measurements: Bulk transport and contact limitation of MoS 2 multilayer flake transistors journal May 2015
Charge carrier mobility in regioregular poly(3-hexylthiophene) probed by transient conductivity techniques: A comparative study journal January 2005
Molecular Miscibility of Polymer−Fullerene Blends journal October 2010
Inkjet Printing-Process and Its Applications journal February 2010
Organic Bioelectronics: Materials and Biocompatibility journal August 2018
A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency journal February 2016
Influence of Solvent Mixing on the Morphology and Performance of Solar Cells Based on Polyfluorene Copolymer/Fullerene Blends journal March 2006
Overcoming Microstructural Limitations in Water Processed Organic Solar Cells by Engineering Customized Nanoparticulate Inks journal January 2018
Nanostructured materials: basic concepts and microstructure journal January 2000
Additive-Assisted Control over Phase-Separated Nanostructures by Manipulating Alkylthienyl Position at Donor Backbone for Solution-Processed, Non-Fullerene, All-Small-Molecule Solar Cells journal March 2014
A New Model for the Morphology of P3HT/PCBM Organic Photovoltaics from Small-Angle Neutron Scattering: Rivers and Streams journal May 2011
Stretchable and ultraflexible organic electronics journal February 2017
Recent Advances in Flexible and Stretchable Bio-Electronic Devices Integrated with Nanomaterials journal January 2016
Template Synthesis of Electronically Conductive Polymer Nanostructures journal February 1995
Fully roll-to-roll prepared organic solar cells in normal geometry with a sputter-coated aluminium top-electrode journal May 2016
Tailored Donor–Acceptor Polymers with an A–D1–A–D2 Structure: Controlling Intermolecular Interactions to Enable Enhanced Polymer Photovoltaic Devices journal April 2014
Open circuit voltage of organic solar cells: an in-depth review journal January 2016
Additives for morphology control in high-efficiency organic solar cells journal September 2013
Biosensors: Printed Organic Transistors with Uniform Electrical Performance and Their Application to Amplifiers in Biosensors (Adv. Electron. Mater. 7/2015) journal July 2015
Fast Printing and In Situ Morphology Observation of Organic Photovoltaics Using Slot-Die Coating journal December 2014
Compact Roll-to-Roll Coater for in Situ X-ray Diffraction Characterization of Organic Electronics Printing journal January 2016
Solvent effect and device optimization of diketopyrrolopyrrole and carbazole copolymer based solar cells journal June 2010
Organic Thin-Film Transistors for Chemical and Biological Sensing journal November 2011
Recent progress in interface engineering of organic thin film transistors with self-assembled monolayers journal January 2018
Organic Transistor-Based Chemical Sensors for Wearable Bioelectronics journal October 2018
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials journal March 2017
EGOFET Peptide Aptasensor for Label-Free Detection of Inflammatory Cytokines in Complex Fluids journal December 2017
Organic Semiconductors: Phenyl Derivative of Dibenzothiopheno[6,5- b :6′,5′- f ]Thieno[3,2- b ]Thiophene (DPh-DBTTT): High Thermally Durable Organic Semiconductor for High-Performance Organic Field-Effect Transistors (Adv. Electron. Mater. 10/2017) journal October 2017
Progress in Poly (3-Hexylthiophene) Organic Solar Cells and the Influence of Its Molecular Weight on Device Performance journal June 2018
Roll-to-roll compatible organic thin film transistor manufacturing technique by printing, lamination, and laser ablation journal November 2014
Nano-pathways: Bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics journal January 2016
Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices journal March 2013
Morphology changes upon scaling a high-efficiency, solution-processed solar cell journal January 2016
Molecular orbital energy level modulation through incorporation of selenium and fluorine into conjugated polymers for organic photovoltaic cells journal January 2013
Flexible, All-Organic Chemiresistor for Detecting Chemically Aggressive Vapors journal March 2012
Charge carrier photogeneration and decay dynamics in the poly(2,7-carbazole) copolymer PCDTBT and in bulk heterojunction composites with PC 70 BM journal March 2010
Doping Effect of Organosulfonic Acid in Poly(3-hexylthiophene) Films for Organic Field-Effect Transistors journal February 2012
Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes journal October 2013
A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications journal June 2004
Controllable synthesis and characterization of poly(aniline- co -pyrrole) using anionic spherical polyelectrolyte brushes as dopant and template journal January 2014
Near-Infrared Electron Acceptors with Fluorinated Regioisomeric Backbone for Highly Efficient Polymer Solar Cells journal November 2018
Porphyrins for dye-sensitised solar cells: new insights into efficiency-determining electron transfer steps journal January 2012
Recombination Dynamics as a Key Determinant of Open Circuit Voltage in Organic Bulk Heterojunction Solar Cells: A Comparison of Four Different Donor Polymers journal August 2010
Mixed conductivity of polythiophene-based ionic polymers under controlled conditions journal December 2017
Understanding Morphology Compatibility for High-Performance Ternary Organic Solar Cells journal August 2016
A projection of commercial-scale organic photovoltaic module costs journal January 2014
Molecular engineering of zinc phthalocyanine sensitizers for efficient dye-sensitized solar cells journal January 2014
Probing individal subcells of fully printed and coated polymer tandem solar cells using multichromatic opto-electronic characterization methods journal June 2015
Zn−Zn Porphyrin Dimer-Sensitized Solar Cells: Toward 3-D Light Harvesting journal November 2009
Characterization of Nanostructure and Cell Compatibility of Polyaniline Films with Different Dopant Acids journal March 2008
High efficient PANI/Pt nanofiber counter electrode used in dye-sensitized solar cell journal January 2012
Roll-to-Roll fabrication of large area functional organic materials journal October 2012
An Inkjet-Printed, Ultralow Voltage, Flexible Organic Field Effect Transistor journal December 2016
High sensitivity organic inorganic hybrid X-ray detectors with direct transduction and broadband response journal July 2018
Structural Complexities in the Active Layers of Organic Electronics journal June 2010
Materials and Mechanics for Stretchable Electronics journal March 2010
Combining Printing, Coating, and Vacuum Deposition on the Roll-to-Roll Scale: A Hybrid Organic Photovoltaics Fabrication journal January 2016
The Crystallization of PEDOT:PSS Polymeric Electrodes Probed In Situ during Printing journal April 2015
A systematic review on silver nanoparticles-induced cytotoxicity: Physicochemical properties and perspectives journal January 2018
Engineering Two-Phase and Three-Phase Microstructures from Water-Based Dispersions of Nanoparticles for Eco-Friendly Polymer Solar Cell Applications journal August 2018
Boosting Direct X‐Ray Detection in Organic Thin Films by Small Molecules Tailoring journal December 2018
Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solarcells journal May 2013
Nanostructured conducting polymers for energy applications: towards a sustainable platform journal January 2016
Shape-Tuned Junction Resistivity and Self-Damping Dynamics in Intense Pulsed Light Sintering of Silver Nanostructure Films journal December 2018
Custom-Shaped Organic Photovoltaic Modules—Freedom of Design by Printing journal February 2017
Nanostructured pseudocapacitive materials decorated 3D graphene foam electrodes for next generation supercapacitors journal January 2015
Rational design of two-dimensional molecular donor–acceptor nanostructure arrays journal January 2015
Solution-Processed Organic Solar Cells journal July 2008
A universal approach to improve electron mobility without significant enlarging phase separation in IDT-based non-fullerene acceptor organic solar cells journal November 2017
Role of Stabilizing Surfactants on Capacitance, Charge, and Ion Transport in Organic Nanoparticle-Based Electronic Devices journal February 2019
Comparative Study of the N-Type Doping Efficiency in Solution-processed Fullerenes and Fullerene Derivatives journal September 2014
High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing journal August 2016
3D Printed Functional and Biological Materials on Moving Freeform Surfaces journal April 2018
A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating journal January 2013
Recent Advances in Nanostructured Conducting Polymers: from Synthesis to Practical Applications journal March 2016
Roll-to-Roll Sputter Coating of Aluminum Cathodes for Large-Scale Fabrication of Organic Photovoltaic Devices journal February 2015
Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes journal May 2017
Organic electronics incorporating crown ethers as Na + binding elements, towards a simple printable hydration sensor journal February 2018
Flexible Organic Electronics in Biology: Materials and Devices journal November 2014
Cation Exchange at Semiconducting Oxide Surfaces: Origin of Light-Induced Performance Increases in Porphyrin Dye-Sensitized Solar Cells journal May 2013
Design of Nonfullerene Acceptors with Near-Infrared Light Absorption Capabilities journal July 2018
Scanning transmission x-ray microscopy of polymer nanoparticles: probing morphology on sub-10 nm length scales journal May 2011
Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic journal October 2008
Inkjet-printed polypyrrole thin films for vapour sensing journal May 2006
Activation of Organic Photovoltaic Light Detectors Using Bend Leakage from Optical Fibers journal March 2016
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research journal September 2013
The Organic Power Transistor: Roll-to-Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics: The Organic Power Transistor: Roll-to-Roll Manufacture  journal August 2015
Reduced Graphene Oxide/Fe 3 O 4 /Polyaniline Nanostructures as Electrode Materials for an All-Solid-State Hybrid Supercapacitor journal March 2017
Efficient charge generation by relaxed charge-transfer states at organic interfaces journal November 2013
Bandgap and Molecular Energy Level Control of Conjugated Polymer Photovoltaic Materials Based on Benzo[1,2- b :4,5- b ′]dithiophene journal August 2008
Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend journal March 2017
Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells journal January 2015
Electrochemical Biosensors Based on Nanostructured Carbon Black: A Review journal January 2017
Efficient organic solar cells processed from hydrocarbon solvents journal January 2016
Label-free C-reactive protein electronic detection with an electrolyte-gated organic field-effect transistor-based immunosensor journal March 2016
A Highly Sensitive, Direct X-Ray Detector Based on a Low-Voltage Organic Field-Effect Transistor journal July 2017
ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents journal May 2014
Review of recent progress in multilayer solution-processed organic light-emitting diodes journal January 2015
The path to ubiquitous and low-cost organic electronic appliances on plastic journal April 2004
Organic semiconducting single crystals as solid-state sensors for ionizing radiation journal January 2014
Large-scale roll-to-roll printed, flexible and stable organic bulk heterojunction photodetector journal March 2018
Direct x-ray detection with conjugated polymer devices journal July 2007
Probing the origin of photocurrent in nanoparticulate organic photovoltaics journal September 2015
Silver nanoparticle ink technology: state of the art journal January 2016
Inkjet printing of single-crystal films journal July 2011
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing journal January 2010
Solar cells with one-day energy payback for the factories of the future journal January 2012
Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations journal September 2014
Polymer Solar Cells: Miscibility-Function Relations in Organic Solar Cells: Significance of Optimal Miscibility in Relation to Percolation (Adv. Energy Mater. 28/2018) journal October 2018
Functionalized Organic Thin Film Transistors for Biosensing journal January 2019
Micropatterned Polypyrrole: A Combination of Electrical and Topographical Characteristics for the Stimulation of Cells journal May 2007
A polymer/fullerene based photodetector with extremely low dark current for x-ray medical imaging applications journal November 2008
Recent Advances in Bulk Heterojunction Polymer Solar Cells journal August 2015
Solution-Assembled Blends of Regioregularity-Controlled Polythiophenes for Coexistence of Mechanical Resilience and Electronic Performance journal April 2017
In vitro neurite guidance effects induced by polylysine pinstripe micropatterns with polylysine background: Neurite Guidance Effects Induced by PLL Pinstripe Micropatterns journal February 2015
Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells journal November 2016
Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells journal April 2009
Polyaniline nanofibers: broadening applications for conducting polymers journal January 2017
All-Inkjet-Printed, All-Air-Processed Solar Cells journal May 2014
Organic Photovoltaics and Bioelectrodes Providing Electrical Stimulation for PC12 Cell Differentiation and Neurite Outgrowth journal March 2016
Diketopyrrolopyrrole-based polymer:fullerene nanoparticle films with thermally stable morphology for organic photovoltaic applications journal February 2017
Development of Lab-to-Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells journal February 2015
Small-molecule solar cells—status and perspectives journal September 2008
Nanostructured carbon black for simultaneous sensing in biological fluids journal May 2016
Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films journal June 2014
Solution Properties of Graphite and Graphene journal June 2006
The OE-A OPV demonstrator anno domini 2011 journal January 2011
Robot-Based High-Throughput Engineering of Alcoholic Polymer: Fullerene Nanoparticle Inks for an Eco-Friendly Processing of Organic Solar Cells journal June 2018
Using o -Chlorobenzaldehyde as a Fast Removable Solvent Additive during Spin-Coating PTB7-Based Active Layers: High Efficiency Thick-Film Polymer Solar Cells journal October 2016
Comparison of inorganic electron transport layers in fully roll-to-roll coated/printed organic photovoltaics in normal geometry journal January 2016
Polyaniline Nanofibers:  Facile Synthesis and Chemical Sensors journal January 2003
An Introduction to Synchrotron Radiation book January 2011
Addressing challenges journal July 2014
Tuning Non-Langevin Recombination in an Organic Photovoltaic Blend Using a Processing Additive journal March 2015
Fabrication conditions for efficient organic photovoltaic cells from aqueous dispersions of nanoparticles journal January 2014
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits journal December 2000
In-line, roll-to-roll morphology analysis of organic solar cell active layers journal January 2017
Organic Electrodes and Communications with Excitable Cells journal July 2017
Flexible and Foldable Fully-Printed Carbon Black Conductive Nanostructures on Paper for High-Performance Electronic, Electrochemical, and Wearable Devices journal July 2017
Monodisperse Co-oligomer Approach toward Nanostructured Films with Alternating Donor−Acceptor Lamellae journal September 2009
Effect of Morphology on the Electrical Resistivity of Silver Nanostructure Films journal January 2017
Charge Photogeneration in Organic Solar Cells journal November 2010
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties journal June 2009
Doping-Induced Screening of the Built-in-Field in Organic Solar Cells: Effect on Charge Transport and Recombination journal October 2012
ITO-free flexible organic solar cells with printed current collecting grids journal May 2011
Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review journal October 2016
Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC 70 BM blend journal January 2015
Roll-to-Roll Printing of Perovskite Solar Cells journal September 2018
Preparation of High-Quality Organic Semiconductor Nanoparticle Films by Solvent-Evaporation-Induced Self-Assembly journal November 2010
Characterization of thick film poly(triarylamine) semiconductor diodes for direct x-ray detection journal September 2009
Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes journal March 2005
Aerosol-Printed Strain Sensor Using PEDOT:PSS journal November 2013
A stable solution-processed polymer semiconductor with record high-mobility for printed transistors journal October 2012
Organic electrochemical transistors journal January 2018
25th Anniversary Article: Rise to Power - OPV-Based Solar Parks journal October 2013
Considerations for Upscaling of Organohalide Perovskite Solar Cells journal November 2016
Structural control of mixed ionic and electronic transport in conducting polymers journal April 2016
A Rubberlike Stretchable Active Matrix Using Elastic Conductors journal September 2008
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations journal January 2018
Printable sensors for explosive detonation journal October 2014
Ternary blends to achieve well-developed nanoscale morphology in organic bulk heterojunction solar cells journal June 2017
Inkjet printing of organic electronics – comparison of deposition techniques and state-of-the-art developments journal January 2013
A Nonconjugated Bridge in Dimer-Sensitized Solar Cells Retards Charge Recombination without Decreasing Charge Injection Efficiency journal October 2013
High-Entropy Mixtures of Pristine Fullerenes for Solution-Processed Transistors and Solar Cells journal October 2015
Printing technologies for biomolecule and cell-based applications journal October 2015
Environmentally friendly preparation of nanoparticles for organic photovoltaics journal August 2018
Overcoming efficiency and stability limits in water-processing nanoparticular organic photovoltaics by minimizing microstructure defects journal December 2018
Engineering the vertical concentration distribution within the polymer:fullerene blends for high performance inverted polymer solar cells journal January 2017
Optimized “Alloy-Parallel” Morphology of Ternary Organic Solar Cells journal February 2016
Electronic Muscles and Skins: A Review of Soft Sensors and Actuators journal August 2017
High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits journal July 2001
Inkjet printed thin and uniform dielectrics for capacitors and organic thin film transistors enabled by the coffee ring effect journal February 2016
Inkjet printed organic electrochemical transistors with highly conducting polymer electrolytes journal October 2016
Inkjet printing for flexible electronics: Materials, processes and equipments journal October 2010
Organic Bioelectronics: Bridging the Signaling Gap between Biology and Technology journal July 2016
Efficient combination of Roll-to-Roll compatible techniques towards the large area deposition of a polymer dielectric film and the solution-processing of an organic semiconductor for the field-effect transistors fabrication on plastic substrate journal October 2019
Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing journal January 2016
High efficiency, fully inkjet printed organic solar cells with freedom of design journal January 2015
Engineering thiophene-based nanoparticles to induce phototransduction in live cells under illumination journal January 2017
Ionizing Radiation Detectors Based on Solution-Grown Organic Single Crystals journal December 2015
Organic Photovoltaic Cells: From Performance Improvement to Manufacturing Processes journal January 2015
Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications journal December 2016
Lithography-Free, Self-Aligned Inkjet Printing with Sub-Hundred-Nanometer Resolution journal April 2005
X-ray imaging with scintillator-sensitized hybrid organic photodetectors journal November 2015
Charge Carrier Lifetime and Recombination in Bulk Heterojunction Solar Cells journal November 2010
Printable organic thin film transistors for glucose detection incorporating inkjet-printing of the enzyme recognition element journal June 2015
A flexible OLED display with an OTFT backplane made by scalable manufacturing process journal January 2010
Organic Electrochemical Transistors text January 2018
A Disposable paper breathalyzer with an alcohol sensing organic electrochemical transistor. journalarticle January 2016