A parametric SPICE model for the simulation of spark gap switches
Abstract
The use of SPICE-based software for the simulation of pulsed power systems—even large complex systems—has become commonplace in the pulsed power community. This is in contrast to earlier work in the field that relied on specially developed simulation codes such as Sandia’s Screamer or the Navy Research Lab’s Bertha, which natively incorporated models for common pulsed power components such as spark gap switches. Unlike these programs, SPICE programs provide a simple and familiar user interface and wide availability. However, SPICE programs do not include realistic models for key pulsed power circuit devices—including the spark gap switch. While simple switch models do exist in SPICE programs, these can only crudely approximate the behavior of a spark gap. This effort focuses on developing an SPICE circuit model for a gas-filled spark gap switch that is physically realistic while being simple enough to permit simulations to run in reasonable times on typical personal computers. Detailed information is provided for implementation in two common versions of SPICE: LTspice and Orcad PSPICE. Adaptation to other SPICE programs is possible with minimal modification. The model is intended as a design tool that uses physical parameters as inputs to connect it directly to the development of useablemore »
- Authors:
- Publication Date:
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1604838
- Grant/Contract Number:
- 1549752
- Resource Type:
- Publisher's Accepted Manuscript
- Journal Name:
- Review of Scientific Instruments
- Additional Journal Information:
- Journal Name: Review of Scientific Instruments Journal Volume: 91 Journal Issue: 3; Journal ID: ISSN 0034-6748
- Publisher:
- American Institute of Physics
- Country of Publication:
- United States
- Language:
- English
Citation Formats
Pouncey, J. Cameron, and Lehr, Jane M. A parametric SPICE model for the simulation of spark gap switches. United States: N. p., 2020.
Web. doi:10.1063/1.5142006.
Pouncey, J. Cameron, & Lehr, Jane M. A parametric SPICE model for the simulation of spark gap switches. United States. https://doi.org/10.1063/1.5142006
Pouncey, J. Cameron, and Lehr, Jane M. Mon .
"A parametric SPICE model for the simulation of spark gap switches". United States. https://doi.org/10.1063/1.5142006.
@article{osti_1604838,
title = {A parametric SPICE model for the simulation of spark gap switches},
author = {Pouncey, J. Cameron and Lehr, Jane M.},
abstractNote = {The use of SPICE-based software for the simulation of pulsed power systems—even large complex systems—has become commonplace in the pulsed power community. This is in contrast to earlier work in the field that relied on specially developed simulation codes such as Sandia’s Screamer or the Navy Research Lab’s Bertha, which natively incorporated models for common pulsed power components such as spark gap switches. Unlike these programs, SPICE programs provide a simple and familiar user interface and wide availability. However, SPICE programs do not include realistic models for key pulsed power circuit devices—including the spark gap switch. While simple switch models do exist in SPICE programs, these can only crudely approximate the behavior of a spark gap. This effort focuses on developing an SPICE circuit model for a gas-filled spark gap switch that is physically realistic while being simple enough to permit simulations to run in reasonable times on typical personal computers. Detailed information is provided for implementation in two common versions of SPICE: LTspice and Orcad PSPICE. Adaptation to other SPICE programs is possible with minimal modification. The model is intended as a design tool that uses physical parameters as inputs to connect it directly to the development of useable pulsed power systems. Data collected from the operation of a high-pressure pulsed-charged switch and a complete 12-stage Marx generator have been used to demonstrate the implementation and accuracy of the model over a wide range of parameters.},
doi = {10.1063/1.5142006},
journal = {Review of Scientific Instruments},
number = 3,
volume = 91,
place = {United States},
year = {Mon Mar 16 00:00:00 EDT 2020},
month = {Mon Mar 16 00:00:00 EDT 2020}
}
https://doi.org/10.1063/1.5142006
Web of Science
Works referenced in this record:
Erection of Compact Marx Generators
journal, June 2019
- Pouncey, Jon Cameron; Lehr, Jane M.; Giri, D. V.
- IEEE Transactions on Plasma Science, Vol. 47, Issue 6
The pulsed discharge arc resistance and its functional behavior
journal, April 1989
- Engel, T. G.; Donaldson, A. L.; Kristiansen, M.
- IEEE Transactions on Plasma Science, Vol. 17, Issue 2
New model for ultracompact coaxial Marx pulse generator simulations
journal, April 2006
- Martin, Benoît; Raymond, Pierre; Wey, Joseph
- Review of Scientific Instruments, Vol. 77, Issue 4
Zur Kenntnis der Gesetze der Gleitfunkenbildung
journal, January 1906
- Toepler, Max
- Annalen der Physik, Vol. 326, Issue 12
The Resistance of Sparks
journal, April 1972
- Vlastós, Antonios E.
- Journal of Applied Physics, Vol. 43, Issue 4
The electric strength of air at high pressure - II
journal, March 1941
- Skilling, H. H.; Brenner, W. C.
- Transactions of the American Institute of Electrical Engineers, Vol. 60, Issue 3
Calibration of uniform-field spark-gaps for high-voltage measurement at power frequencies
journal, April 1947
- Bruce, F. M.
- Journal of the Institution of Electrical Engineers - Part II: Power Engineering, Vol. 94, Issue 38
Arc resistance of laser‐triggered spark gaps
journal, September 1985
- Kushner, M. J.; Kimura, W. D.; Byron, S. R.
- Journal of Applied Physics, Vol. 58, Issue 5
Gas Discharge Tube Modeling With PSpice
journal, November 2008
- Zola, J. G.
- IEEE Transactions on Electromagnetic Compatibility, Vol. 50, Issue 4