skip to main content
DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

This content will become publicly available on February 19, 2021

Title: Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys

Authors:
ORCiD logo [1];  [1];  [2];  [1];  [1]; ORCiD logo [3]; ORCiD logo [4]; ORCiD logo [1]; ORCiD logo [5]
  1. Center for Advancing Materials Performance from the NanoscaleState Key Laboratory for Mechanical Behavior of MaterialsXi'an Jiaotong University Xi'an Shaanxi 710049 P. R. China
  2. School of Materials Science and EngineeringChang'an University Xi'an Shaanxi 710064 P. R. China
  3. Advanced Light SourceLawrence Berkeley National Laboratory Berkeley CA 94720 USA
  4. Departments of Nuclear Science and Engineering and Materials Science and EngineeringMassachusetts Institute of Technology Cambridge MA 02139 USA
  5. Department of Materials Science and EngineeringJohns Hopkins University Baltimore MD 21218 USA
Publication Date:
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
1600845
Grant/Contract Number:  
[DE‐AC02‐05CH11231]
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Advanced Materials
Additional Journal Information:
[Journal Name: Advanced Materials Journal Volume: 32 Journal Issue: 12]; Journal ID: ISSN 0935-9648
Publisher:
Wiley Blackwell (John Wiley & Sons)
Country of Publication:
Germany
Language:
English

Citation Formats

Chen, Kai, Huang, Runqiu, Li, Yao, Lin, Sicong, Zhu, Wenxin, Tamura, Nobumichi, Li, Ju, Shan, Zhi‐Wei, and Ma, Evan. Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys. Germany: N. p., 2020. Web. doi:10.1002/adma.201907164.
Chen, Kai, Huang, Runqiu, Li, Yao, Lin, Sicong, Zhu, Wenxin, Tamura, Nobumichi, Li, Ju, Shan, Zhi‐Wei, & Ma, Evan. Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys. Germany. doi:10.1002/adma.201907164.
Chen, Kai, Huang, Runqiu, Li, Yao, Lin, Sicong, Zhu, Wenxin, Tamura, Nobumichi, Li, Ju, Shan, Zhi‐Wei, and Ma, Evan. Sun . "Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys". Germany. doi:10.1002/adma.201907164.
@article{osti_1600845,
title = {Rafting‐Enabled Recovery Avoids Recrystallization in 3D‐Printing‐Repaired Single‐Crystal Superalloys},
author = {Chen, Kai and Huang, Runqiu and Li, Yao and Lin, Sicong and Zhu, Wenxin and Tamura, Nobumichi and Li, Ju and Shan, Zhi‐Wei and Ma, Evan},
abstractNote = {},
doi = {10.1002/adma.201907164},
journal = {Advanced Materials},
number = [12],
volume = [32],
place = {Germany},
year = {2020},
month = {3}
}

Journal Article:
Free Publicly Available Full Text
This content will become publicly available on February 19, 2021
Publisher's Version of Record

Save / Share:

Works referenced in this record:

Single-crystal laser deposition of superalloys: processing–microstructure maps
journal, April 2001


Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting: Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4
journal, April 2015

  • Ramsperger, Markus; Mújica Roncery, Laís; Lopez-Galilea, Inmaculada
  • Advanced Engineering Materials, Vol. 17, Issue 10
  • DOI: 10.1002/adem.201500037

Dislocation structures and their relationship to strength in deformed nickel microcrystals
journal, August 2008


Effect of cyclic recovery heat treatment on surface recrystallization of a directionally solidified superalloy
journal, December 2011

  • Xie, Guang; Zhang, Jian; Lou, Lang-hong
  • Progress in Natural Science: Materials International, Vol. 21, Issue 6
  • DOI: 10.1016/S1002-0071(12)60088-4

Epitaxial laser metal forming: analysis of microstructure formation
journal, November 1999


Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
journal, July 2018

  • Körner, C.; Ramsperger, M.; Meid, C.
  • Metallurgical and Materials Transactions A, Vol. 49, Issue 9
  • DOI: 10.1007/s11661-018-4762-5

Alloy design for aircraft engines
journal, July 2016


Rafting in Superalloys
journal, March 1996

  • Nabarro, Frank R. N.
  • Metallurgical and Materials Transactions A, Vol. 27, Issue 3
  • DOI: 10.1007/BF02648942

Massive nanoprecipitation in an Fe-19Ni- x Al maraging steel triggered by the intrinsic heat treatment during laser metal deposition
journal, May 2017


About the relations between finite strain in non-cubic crystals and the related phenomenological P-V Equation of State
journal, June 2005


Temperature-dependent ideal strength and stacking fault energy of fcc Ni: a first-principles study of shear deformation
journal, March 2012


The effect of lattice misfit on the dislocation motion in superalloys during high-temperature low-stress creep
journal, October 2005


Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy
journal, March 2013


Surface recrystallization in a single crystal nickel-based superalloy
journal, December 1984

  • Bond, S. D.; Martin, J. W.
  • Journal of Materials Science, Vol. 19, Issue 12
  • DOI: 10.1007/BF00980749

Gas Turbine Technology Evolution: A Designers Perspective
journal, July 2004

  • Koff, Bernard L.
  • Journal of Propulsion and Power, Vol. 20, Issue 4
  • DOI: 10.2514/1.4361

Epitaxial deposition of nickel-based superalloy René 142 through scanning laser epitaxy (SLE)
journal, August 2018


Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
journal, January 2016

  • Ramsperger, Markus; Singer, Robert F.; Körner, Carolin
  • Metallurgical and Materials Transactions A, Vol. 47, Issue 3
  • DOI: 10.1007/s11661-015-3300-y

Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
journal, January 2018


Peritectic titanium alloys for 3D printing
journal, August 2018


On the kinetics of rafting in CMSX-4 superalloy single crystals
journal, May 1999


Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates
journal, April 2014


A dedicated superbend x-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source
journal, March 2009

  • Kunz, Martin; Tamura, Nobumichi; Chen, Kai
  • Review of Scientific Instruments, Vol. 80, Issue 3
  • DOI: 10.1063/1.3096295

Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique
journal, July 2018


Rafting in single crystal nickel-base superalloys — An overview
journal, February 2003


Effects of stacking fault energy on the creep behaviors of Ni-base superalloy
journal, December 2014


Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
journal, February 2012


Microstructure simulation on recrystallization of an as-cast nickel based single crystal superalloy
journal, September 2015


Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
journal, January 2017

  • Gorsse, Stéphane; Hutchinson, Christopher; Gouné, Mohamed
  • Science and Technology of Advanced Materials, Vol. 18, Issue 1
  • DOI: 10.1080/14686996.2017.1361305

The effect of alloying elements on the dislocation climbing velocity in Ni: A first-principles study
journal, November 2009


Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
journal, June 2018

  • Babu, S. S.; Raghavan, N.; Raplee, J.
  • Metallurgical and Materials Transactions A, Vol. 49, Issue 9
  • DOI: 10.1007/s11661-018-4702-4

Plastic strain-induced rafting of γ′ precipitates in Ni superalloys: Elasticity analysis
journal, November 2006


A modeling study of stress and strain formation induced during melting process in powder-bed electron beam melting for Ni superalloy
journal, July 2018


A peak position comparison method for high-speed quantitative Laue microdiffraction data processing
journal, January 2018


Recrystallization in Single Crystals of Nickel Base Superalloys
conference, January 2000


Recrystallisation of single crystal superalloy CMSX–4
journal, April 2003