Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains

Li, Xinfeng; Zhang, Jin; Hou, Dewen; Li, Qizhen

doi:10.1016/j.msea.2018.05.081

Title: Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains

Authors:: Li, Xinfeng; Zhang, Jin; Hou, Dewen; Li, Qizhen

Publication Date:: Fri Jun 01 00:00:00 EDT 2018

Sponsoring Org.:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI Identifier:: 1591678

Grant/Contract Number:: DESC0016333

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Additional Journal Information:: Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Volume: 729 Journal Issue: C; Journal ID: ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Li, Xinfeng, Zhang, Jin, Hou, Dewen, and Li, Qizhen. Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains.  Netherlands: N. p., 2018. 
Web.  doi:10.1016/j.msea.2018.05.081.

Copy to clipboard


                    Li, Xinfeng, Zhang, Jin, Hou, Dewen, & Li, Qizhen. Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains.  Netherlands.  https://doi.org/10.1016/j.msea.2018.05.081

Copy to clipboard


                    Li, Xinfeng, Zhang, Jin, Hou, Dewen, and Li, Qizhen. Fri .  
"Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains".  Netherlands.  https://doi.org/10.1016/j.msea.2018.05.081.

Copy to clipboard


                    
@article{osti_1591678,

  title        = {Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains},

  author       = {Li, Xinfeng and Zhang, Jin and Hou, Dewen and Li, Qizhen},

  abstractNote = {},

  doi          = {10.1016/j.msea.2018.05.081},

  journal      = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},

  number       = C,

  volume       = 729,

  place        = {Netherlands},

  year         = {Fri Jun 01 00:00:00 EDT 2018},

  month        = {Fri Jun 01 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.msea.2018.05.081

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 14 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Single and double twin nucleation, growth, and interaction in an extruded magnesium alloy
journal, April 2017

Mokdad, F.; Chen, D. L.; Li, D. Y.
Materials & Design, Vol. 119
DOI: 10.1016/j.matdes.2017.01.072

Tensile Deformation and Fracture Mechanism of Bulk Bimodal Ultrafine-Grained Al-Mg Alloy
journal, October 2009

Lee, Zonghoon; Radmilovic, Velimir; Ahn, Byungmin
Metallurgical and Materials Transactions A, Vol. 41, Issue 4
DOI: 10.1007/s11661-009-0007-y

Effect of Ball Milling Time on Microstructure and Hardness of Porous Magnesium/Carbon Nanofiber Composites
journal, April 2017

Xu, Huiru; Zou, Ning; Li, Qizhen
JOM, Vol. 69, Issue 7
DOI: 10.1007/s11837-017-2361-3

Anisotropic deformation of extruded magnesium alloy AZ31 under uniaxial compression: A study with simultaneous in situ synchrotron x-ray imaging and diffraction
journal, November 2016

Lu, L.; Huang, J. W.; Fan, D.
Acta Materialia, Vol. 120
DOI: 10.1016/j.actamat.2016.08.029

Hall-Petch equation in a hypoeutectic Al-Si cast alloy: grain size vs. secondary dendrite arm spacing
journal, January 2017

Ghassemali, Ehsan; Riestra, Martin; Bogdanoff, Toni
Procedia Engineering, Vol. 207
DOI: 10.1016/j.proeng.2017.10.731

Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy
journal, September 2001

Tellkamp, V. L.; Lavernia, E. J.; Melmed, A.
Metallurgical and Materials Transactions A, Vol. 32, Issue 9
DOI: 10.1007/s11661-001-0207-6

Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging
journal, February 2017

Jiang, M. G.; Xu, C.; Nakata, T.
Journal of Alloys and Compounds, Vol. 694
DOI: 10.1016/j.jallcom.2016.10.109

Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling
journal, June 2012

Song, Bo; Xin, Renlong; Chen, Gang
Scripta Materialia, Vol. 66, Issue 12
DOI: 10.1016/j.scriptamat.2012.02.047

Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings
journal, April 2012

Li, Qizhen
Materials Science and Engineering: A, Vol. 540
DOI: 10.1016/j.msea.2012.01.116

The microstructure, tensile, and shear deformation behavior of an AZ31 magnesium alloy after extrusion and equal channel angular pressing
journal, August 2010

Masoudpanah, S. M.; Mahmudi, R.
Materials & Design, Vol. 31, Issue 7
DOI: 10.1016/j.matdes.2010.02.018

Twin characteristics and flow stress evolution in extruded magnesium alloy AZ31 subjected to multiple loads
journal, November 2013

He, Jiejun; Liu, Tianmo; Zhang, Yin
Journal of Alloys and Compounds, Vol. 578
DOI: 10.1016/j.jallcom.2013.07.001

Nanostructurization assisted by twinning during equal channel angular pressing of metastable 316L stainless steel
journal, February 2011

Ueno, H.; Kakihata, K.; Kaneko, Y.
Journal of Materials Science, Vol. 46, Issue 12
DOI: 10.1007/s10853-011-5303-4

Statistical analyses of deformation twinning in magnesium
journal, May 2010

Beyerlein, I. J.; Capolungo, L.; Marshall, P. E.
Philosophical Magazine, Vol. 90, Issue 16
DOI: 10.1080/14786431003630835

Evolution of twinning in extruded AZ31 alloy with bimodal grain structure
journal, April 2017

Garcés, G.; Oñorbe, E.; Gan, W.
Materials Characterization, Vol. 126
DOI: 10.1016/j.matchar.2017.02.017

Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg
journal, June 2008

Clausen, B.; Tomé, C. N.; Brown, D. W.
Acta Materialia, Vol. 56, Issue 11
DOI: 10.1016/j.actamat.2008.01.057

Effect of tempering temperature and inclusions on hydrogen-assisted fracture behaviors of a low alloy steel
journal, January 2017

Li, Xinfeng; Zhang, Jin; Shen, Sicong
Materials Science and Engineering: A, Vol. 682
DOI: 10.1016/j.msea.2016.11.064

Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials
journal, August 2016

Vajpai, Sanjay Kumar; Ota, Mie; Zhang, Zhe
Materials Research Letters, Vol. 4, Issue 4
DOI: 10.1080/21663831.2016.1218965

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
journal, November 2015

Wu, Xiaolei; Yang, Muxin; Yuan, Fuping
Proceedings of the National Academy of Sciences, Vol. 112, Issue 47
DOI: 10.1073/pnas.1517193112

Grain size and texture effect on compression behavior of hot-extruded Mg–3Al–1Zn alloys at room temperature
journal, September 2009

Chang, L. L.; Wang, Y. N.; Zhao, X.
Materials Characterization, Vol. 60, Issue 9
DOI: 10.1016/j.matchar.2009.04.001

Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
journal, April 2014

Wei, Yujie; Li, Yongqiang; Zhu, Lianchun
Nature Communications, Vol. 5, Issue 1
DOI: 10.1038/ncomms4580

The effect of twin–twin interactions on the nucleation and propagation of twinning in magnesium
journal, June 2013

El Kadiri, Haitham; Kapil, J.; Oppedal, A. L.
Acta Materialia, Vol. 61, Issue 10
DOI: 10.1016/j.actamat.2013.02.030

Effect of dislocation transmutation on modeling hardening mechanisms by twinning in magnesium
journal, March 2012

Oppedal, A. L.; El Kadiri, H.; Tomé, C. N.
International Journal of Plasticity, Vol. 30-31
DOI: 10.1016/j.ijplas.2011.09.002

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
journal, October 2004

Barnett, M. R.; Keshavarz, Z.; Beer, A. G.
Acta Materialia, Vol. 52, Issue 17
DOI: 10.1016/j.actamat.2004.07.015

Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys
journal, October 2009

Oh-ishi, K.; Mendis, C. L.; Homma, T.
Acta Materialia, Vol. 57, Issue 18
DOI: 10.1016/j.actamat.2009.07.057

Microstructural evolution of extruded AZ31 alloy with bimodal structure during compression
journal, August 2017

Kim, Sang-Hoon; Jo, Wan-Kuen; Hong, Won-Hwa
Materials Science and Engineering: A, Vol. 702
DOI: 10.1016/j.msea.2017.06.102

Nucleation and Growth Behavior of Twin Region Around Yield Point of Polycrystalline Pure Ti
journal, June 2011

Murasawa, G.; Morimoto, T.; Yoneyama, S.
Experimental Mechanics, Vol. 52, Issue 5
DOI: 10.1007/s11340-011-9508-x

Development of Bimodal Ferrite-Grain Structures in Low-Carbon Steel Using Rapid Intercritical Annealing
journal, December 2012

Karmakar, A.; Karani, A.; Patra, S.
Metallurgical and Materials Transactions A, Vol. 44, Issue 5
DOI: 10.1007/s11661-012-1556-z

Enhancing the strength and ductility in accumulative back extruded WE43 magnesium alloy through achieving bimodal grain size distribution and texture weakening
journal, June 2017

Asqardoust, Sh.; Zarei Hanzaki, A.; Abedi, H. R.
Materials Science and Engineering: A, Vol. 698
DOI: 10.1016/j.msea.2017.04.098

Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime
journal, September 2008

Yang, F.; Yin, S. M.; Li, S. X.
Materials Science and Engineering: A, Vol. 491, Issue 1-2
DOI: 10.1016/j.msea.2008.02.003

Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy
journal, May 2011

Yamasaki, Michiaki; Hashimoto, Kenji; Hagihara, Koji
Acta Materialia, Vol. 59, Issue 9
DOI: 10.1016/j.actamat.2011.02.038

High-strength extruded Mg–Al–Ca–Mn alloy
journal, August 2011

Xu, S. W.; Oh-ishi, K.; Kamado, S.
Scripta Materialia, Vol. 65, Issue 3
DOI: 10.1016/j.scriptamat.2011.04.026

Microstructure and deformation mechanism of 0001 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings
journal, April 2013

Li, Qizhen
Materials Science and Engineering: A, Vol. 568
DOI: 10.1016/j.msea.2013.01.028

Compressive and fatigue damage behavior of commercially pure zinc
journal, September 2007

Li, H.; Duan, Q. Q.; Li, X. W.
Materials Science and Engineering: A, Vol. 466, Issue 1-2
DOI: 10.1016/j.msea.2007.02.062

Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy
journal, February 2018

Bryła, Krzysztof; Morgiel, Jerzy; Faryna, Marek
Materials Letters, Vol. 212
DOI: 10.1016/j.matlet.2017.10.113

Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al–7.5Mg alloy
journal, November 2005

Lee, Z.; Witkin, D. B.; Radmilovic, V.
Materials Science and Engineering: A, Vol. 410-411
DOI: 10.1016/j.msea.2005.08.104

Microstructural development under interrupted hot deformation and the mechanical properties of a cast Mg–Gd–Y–Zr alloy
journal, January 2016

Xiao, Zhenyu; Yang, Xuyue; Yang, Yi
Materials Science and Engineering: A, Vol. 652
DOI: 10.1016/j.msea.2015.11.034

Study on the paired twinning behavior in a hot rolled AZ31 magnesium alloy via interrupted in situ compression
journal, June 2016

Chen, Huicong; Liu, Tianmo; Hou, Dewen
Materials Science and Engineering: A, Vol. 667
DOI: 10.1016/j.msea.2016.05.006

Magnesium
journal, April 2001

Mordike, B. L.; Ebert, T.
Materials Science and Engineering: A, Vol. 302, Issue 1
DOI: 10.1016/S0921-5093(00)01351-4

Dynamic recrystallization behavior of magnesium alloys with LPSO during hot deformation
journal, May 2017

Yu, Jianmin; Zhang, Zhimin; Wang, Qiang
Journal of Alloys and Compounds, Vol. 704
DOI: 10.1016/j.jallcom.2017.01.321

Effect of carbon nanofiber concentration on mechanical properties of porous magnesium composites: Experimental and theoretical analysis
journal, October 2017

Xu, Huiru; Li, Qizhen
Materials Science and Engineering: A, Vol. 706
DOI: 10.1016/j.msea.2017.09.024

Forming limit of magnesium alloy at elevated temperatures for precision forging
journal, April 2002

Ogawa, N.; Shiomi, M.; Osakada, K.
International Journal of Machine Tools and Manufacture, Vol. 42, Issue 5
DOI: 10.1016/S0890-6955(01)00149-3

Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy
journal, February 2007

Jiang, Lan; Jonas, John J.; Luo, Alan A.
Materials Science and Engineering: A, Vol. 445-446
DOI: 10.1016/j.msea.2006.09.069

Similar Records in DOE PAGES and OSTI.GOV collections:

Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains

Journal Article Li, Xinfeng ; Zhang, Jin ; Hou, Dewen ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

Not provided.
https://doi.org/10.1016/j.msea.2018.05.081
Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy

Journal Article Roodposhti, Peiman Shahbeigi ; Sarkar, Apu ; Murty, Korukonda Linga ; ... - Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
Cited by 26
https://doi.org/10.1016/j.msea.2016.05.076
Anisotropic deformation of extruded magnesium alloy AZ31 under uniaxial compression: A study with simultaneous in situ synchrotron x-ray imaging and diffraction

Journal Article Lu, L. ; Huang, J. W. ; Fan, D. ; ... - Acta Materialia

In situ synchrotron x-ray imaging and diffraction are used to investigate anisotropic deformation of an extruded magnesium alloy AZ31 under uniaxial compression along two different directions, with the loading axis (LA) either parallel or perpendicular to the extrusion direction (ED), referred to as LA∥ED and LAED, respectively. Multiscale measurements including stress–strain curves (macroscale), x-ray digital image correlation (mesoscale), and diffraction (microscale) are obtained simultaneously. Electron backscatter diffraction is performed on samples collected at various strains to characterize deformation twins. The rapid increase in strain hardening rate for the LA∥ED loading is attributed to marked {101¯2} extension twinning and subsequent homogenizationmore »« less
Cited by 46
https://doi.org/10.1016/j.actamat.2016.08.029

Full Text Available
Quasi in-situ EBSD analysis of twinning-detwinning and slip behaviors in textured AZ31 magnesium alloy subjected to compressive-tensile loading

Journal Article Zhu, Yuzhi ; Hou, Dewen ; Li, Qizhen - Journal of Magnesium and Alloys

Twinning and detwinning behavior, together with slip behavior, are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction (RD) after each interrupted mechanical test via quasi in-situ electron backscattered diffraction technique. The results show that twinning firstly takes place under the compressive strain along the RD. With the increasing compressive strain, {more »« less
https://doi.org/10.1016/j.jma.2021.08.025
An Investigation to Double Hit Deformation Behavior of AZ31 Magnesium Alloy

Journal Article Shamsi, M ; Hanzaki, A Zarei ; Naei, H - AIP Conference Proceedings

In recent years magnesium alloys have been used in different industries due to their outstanding properties. The hot deformation processes are recognized to be the most applicable forming routes for these alloys. These are usually performed through multi-stage straining. Accordingly the static restoration processes may play important roles on their final microstructure and mechanical properties. In the present work double hit compression tests were applied on AZ31 magnesium alloy. The results were analyzed relying on the fractional softening relationship. The effects of strain rate and inter-pass time were discussed. Microstructural observations were addressed to describe the effects of static recrystallizationmore »« less
https://doi.org/10.1063/1.2729694

Similar Records

Title: Compressive deformation and fracture behaviors of AZ31 magnesium alloys with equiaxed grains or bimodal grains

Citation Formats

Single and double twin nucleation, growth, and interaction in an extruded magnesium alloy journal, April 2017

Tensile Deformation and Fracture Mechanism of Bulk Bimodal Ultrafine-Grained Al-Mg Alloy journal, October 2009

Effect of Ball Milling Time on Microstructure and Hardness of Porous Magnesium/Carbon Nanofiber Composites journal, April 2017

Anisotropic deformation of extruded magnesium alloy AZ31 under uniaxial compression: A study with simultaneous in situ synchrotron x-ray imaging and diffraction journal, November 2016

Hall-Petch equation in a hypoeutectic Al-Si cast alloy: grain size vs. secondary dendrite arm spacing journal, January 2017

Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy journal, September 2001

Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging journal, February 2017

Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling journal, June 2012

Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings journal, April 2012

The microstructure, tensile, and shear deformation behavior of an AZ31 magnesium alloy after extrusion and equal channel angular pressing journal, August 2010

Twin characteristics and flow stress evolution in extruded magnesium alloy AZ31 subjected to multiple loads journal, November 2013

Nanostructurization assisted by twinning during equal channel angular pressing of metastable 316L stainless steel journal, February 2011

Statistical analyses of deformation twinning in magnesium journal, May 2010

Evolution of twinning in extruded AZ31 alloy with bimodal grain structure journal, April 2017

Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg journal, June 2008

Effect of tempering temperature and inclusions on hydrogen-assisted fracture behaviors of a low alloy steel journal, January 2017

Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials journal, August 2016

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility journal, November 2015

Grain size and texture effect on compression behavior of hot-extruded Mg–3Al–1Zn alloys at room temperature journal, September 2009

Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins journal, April 2014

The effect of twin–twin interactions on the nucleation and propagation of twinning in magnesium journal, June 2013

Effect of dislocation transmutation on modeling hardening mechanisms by twinning in magnesium journal, March 2012

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn journal, October 2004

Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys journal, October 2009

Microstructural evolution of extruded AZ31 alloy with bimodal structure during compression journal, August 2017

Nucleation and Growth Behavior of Twin Region Around Yield Point of Polycrystalline Pure Ti journal, June 2011

Development of Bimodal Ferrite-Grain Structures in Low-Carbon Steel Using Rapid Intercritical Annealing journal, December 2012

Enhancing the strength and ductility in accumulative back extruded WE43 magnesium alloy through achieving bimodal grain size distribution and texture weakening journal, June 2017

Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime journal, September 2008

Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy journal, May 2011

High-strength extruded Mg–Al–Ca–Mn alloy journal, August 2011

Microstructure and deformation mechanism of 0001 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings journal, April 2013

Compressive and fatigue damage behavior of commercially pure zinc journal, September 2007

Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy journal, February 2018

Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al–7.5Mg alloy journal, November 2005

Microstructural development under interrupted hot deformation and the mechanical properties of a cast Mg–Gd–Y–Zr alloy journal, January 2016

Study on the paired twinning behavior in a hot rolled AZ31 magnesium alloy via interrupted in situ compression journal, June 2016

Magnesium journal, April 2001

Dynamic recrystallization behavior of magnesium alloys with LPSO during hot deformation journal, May 2017

Effect of carbon nanofiber concentration on mechanical properties of porous magnesium composites: Experimental and theoretical analysis journal, October 2017

Forming limit of magnesium alloy at elevated temperatures for precision forging journal, April 2002

Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy journal, February 2007

Single and double twin nucleation, growth, and interaction in an extruded magnesium alloy
journal, April 2017

Tensile Deformation and Fracture Mechanism of Bulk Bimodal Ultrafine-Grained Al-Mg Alloy
journal, October 2009

Effect of Ball Milling Time on Microstructure and Hardness of Porous Magnesium/Carbon Nanofiber Composites
journal, April 2017

Anisotropic deformation of extruded magnesium alloy AZ31 under uniaxial compression: A study with simultaneous in situ synchrotron x-ray imaging and diffraction
journal, November 2016

Hall-Petch equation in a hypoeutectic Al-Si cast alloy: grain size vs. secondary dendrite arm spacing
journal, January 2017

Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy
journal, September 2001

Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging
journal, February 2017

Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling
journal, June 2012

Mechanical properties and microscopic deformation mechanism of polycrystalline magnesium under high-strain-rate compressive loadings
journal, April 2012

The microstructure, tensile, and shear deformation behavior of an AZ31 magnesium alloy after extrusion and equal channel angular pressing
journal, August 2010

Twin characteristics and flow stress evolution in extruded magnesium alloy AZ31 subjected to multiple loads
journal, November 2013

Nanostructurization assisted by twinning during equal channel angular pressing of metastable 316L stainless steel
journal, February 2011

Statistical analyses of deformation twinning in magnesium
journal, May 2010

Evolution of twinning in extruded AZ31 alloy with bimodal grain structure
journal, April 2017

Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg
journal, June 2008

Effect of tempering temperature and inclusions on hydrogen-assisted fracture behaviors of a low alloy steel
journal, January 2017

Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials
journal, August 2016

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
journal, November 2015

Grain size and texture effect on compression behavior of hot-extruded Mg–3Al–1Zn alloys at room temperature
journal, September 2009

Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
journal, April 2014

The effect of twin–twin interactions on the nucleation and propagation of twinning in magnesium
journal, June 2013

Effect of dislocation transmutation on modeling hardening mechanisms by twinning in magnesium
journal, March 2012

Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
journal, October 2004

Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys
journal, October 2009

Microstructural evolution of extruded AZ31 alloy with bimodal structure during compression
journal, August 2017

Nucleation and Growth Behavior of Twin Region Around Yield Point of Polycrystalline Pure Ti
journal, June 2011

Development of Bimodal Ferrite-Grain Structures in Low-Carbon Steel Using Rapid Intercritical Annealing
journal, December 2012

Enhancing the strength and ductility in accumulative back extruded WE43 magnesium alloy through achieving bimodal grain size distribution and texture weakening
journal, June 2017

Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime
journal, September 2008

Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy
journal, May 2011

High-strength extruded Mg–Al–Ca–Mn alloy
journal, August 2011

Microstructure and deformation mechanism of 0001 magnesium single crystal subjected to quasistatic and high-strain-rate compressiveloadings
journal, April 2013

Compressive and fatigue damage behavior of commercially pure zinc
journal, September 2007

Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy
journal, February 2018

Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al–7.5Mg alloy
journal, November 2005

Microstructural development under interrupted hot deformation and the mechanical properties of a cast Mg–Gd–Y–Zr alloy
journal, January 2016

Study on the paired twinning behavior in a hot rolled AZ31 magnesium alloy via interrupted in situ compression
journal, June 2016

Magnesium
journal, April 2001

Dynamic recrystallization behavior of magnesium alloys with LPSO during hot deformation
journal, May 2017

Effect of carbon nanofiber concentration on mechanical properties of porous magnesium composites: Experimental and theoretical analysis
journal, October 2017

Forming limit of magnesium alloy at elevated temperatures for precision forging
journal, April 2002

Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy
journal, February 2007