On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy

Saleh, Ahmed A.; Mannan, Parvez; Tomé, Carlos N.; Pereloma, Elena V.

doi:10.1016/j.jallcom.2018.03.031

Title: On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy

Full Record
Other Related Research

Authors:

; Mannan, Parvez; Tomé, Carlos N.; Pereloma, Elena V.

Publication Date:: 2018-06-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1591667

Grant/Contract Number:: 06SCPE401; W-7405-ENG-36

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Alloys and Compounds

Additional Journal Information:: Journal Name: Journal of Alloys and Compounds Journal Volume: 748 Journal Issue: C; Journal ID: ISSN 0925-8388

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Saleh, Ahmed A., Mannan, Parvez, Tomé, Carlos N., and Pereloma, Elena V. On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy.  Netherlands: N. p., 2018. 
Web.  doi:10.1016/j.jallcom.2018.03.031.

Copy to clipboard


                    Saleh, Ahmed A., Mannan, Parvez, Tomé, Carlos N., & Pereloma, Elena V. On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy.  Netherlands.  https://doi.org/10.1016/j.jallcom.2018.03.031

Copy to clipboard


                    Saleh, Ahmed A., Mannan, Parvez, Tomé, Carlos N., and Pereloma, Elena V. Fri .  
"On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy".  Netherlands.  https://doi.org/10.1016/j.jallcom.2018.03.031.

Copy to clipboard


                    
@article{osti_1591667,

  title        = {On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy},

  author       = {Saleh, Ahmed A. and Mannan, Parvez and Tomé, Carlos N. and Pereloma, Elena V.},

  abstractNote = {},

  doi          = {10.1016/j.jallcom.2018.03.031},

  journal      = {Journal of Alloys and Compounds},

  number       = C,

  volume       = 748,

  place        = {Netherlands},

  year         = {2018},

  month        = {6}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.jallcom.2018.03.031

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 9 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy

Journal Article Pereloma, Elena V., E-mail: elenap@uow.edu.au ; UOW Electron Microscopy Centre, University of Wollongong, Wollongong, NSW 2500 ; Mannan, Parvez ; ... - Materials Characterization

For the first time, a combination of scanning transmission electron microscopy and electron back-scattering diffraction is used to elucidate the early stages of particle stimulated recrystallisation at Nb carbides in Ni-30wt.%Fe alloy subjected to high temperature plane strain compression. While particles with sizes even below 1 μm were found to induce dynamic or metadynamic recrystallisation, only a small fraction of coarse particles served as nucleation sites. - Highlights: • The early stages of particle stimulated recrystallisation at Nb carbides are elucidated • A combination of transmission electron microscopy and electron back scattering diffraction used • Particles below 1 μm sizemore »« less
https://doi.org/10.1016/J.MATCHAR.2017.01.026
Failures to model the development of a cube texture during the high temperature compression of Al-Mg alloys

Conference Kocks, U F ; Chen, Shuh Rong ; Dawson, P R

A strong (100) fiber texture has been observed under some circumstances after the compression and tension of Al-Mg alloys. It is not due to static recrystallization after the text, but probably connected with some form of dynamic recrystallization. Possibilities that this unusual texture might rise from some unconventional deformation mechanisms were searched for but not found.
Full Text Available
The effect of the cube texture component on the earing behavior of rolled f. c. c. metals

Conference Rollett, A D ; Canova, G R ; Kocks, U F

An application of texture simulation to the formability of rolled f.c.c. sheet is described. Control of the earing behavior of such sheet is crucial to the efficient utilization of material. Cold-rolled f.c.c. metals characteristically give ears at 45/sup 0/ to the rolling direction but it is known that if a large cube component is present before the material is rolled, the severity of the earing is reduced. The cube component, (010)(001), by itself is known to give ears at 90/sup 0/ to the rolling direction and could thus balance a 45/sup 0/ earing tendency. The cube component is unstable tomore »« less
Full Text Available
Evolution of Microstructure and Creep Behavior in an Fe-Ni-Cr-Nb-C Alloy during Service in Hydrocarbon Cracker Tubes

Journal Article Sun, Dingyi ; Lee, Hyungsoo ; Jeon, Changwoo ; ... - Journal of Materials Engineering and Performance

Heat resistant, cast austenitic Fe-Ni-Cr-Nb-C alloy tubes are used by the petrochemical industry to transport hydrocarbons at temperatures between 850 and 1050 °C. Exposure to carbon from the process stream and nitrogen from the air causes severe carburization and nitridation in the tube walls, which influences creep resistance and degrades their ductility. A better understanding of these processes would enable their service life to be extended. To this end, we report the results of an experimental and computational study of the changes in microstructure and creep behavior in a representative alloy during service. The microstructure of the fresh material is comparedmore »« less
https://doi.org/10.1007/S11665-019-04447-8
The development of cube and non-cube recrystallization textures

Technical Report Necker, C T ; Rollett, A D ; Doherty, R D

The development of recrystallization textures in cold rolled copper has been characterized using an electron backscatter pattern (EBSP) technique. Cube oriented grains exist in materials that have been annealed after a series of rolling strains, between 1.0 and 4.5 (von Mises strain). The strength and sharpness of these cube textures increases with increasing strain thus replacing the random texture produced by recrystallization of moderately deformed copper. The preferential formation of the cube, texture is attributed to the homogenization of stored energy gradients adjacent to randomly oriented nucleation sites. This process, coupled with the development of the microstructure adjacent to deformedmore »« less
https://doi.org/10.2172/102186

Full Text Available

Similar Records