Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles

doi:10.1016/j.jpowsour.2019.227357

This content will become publicly available on November 11, 2020

Title: Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles

Full Record
Other Related Research

Authors:

; Lu, Yanchen; Nikiforov, Alexey Y.;

; Gopalan, Srikanth;

Publication Date:: 2020-01-01

Sponsoring Org.:: USDOE

OSTI Identifier:: 1573881

Grant/Contract Number:: FE0026096

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Power Sources

Additional Journal Information:: Journal Name: Journal of Power Sources Journal Volume: 447 Journal Issue: C; Journal ID: ISSN 0378-7753

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Gasper, Paul J., Lu, Yanchen, Nikiforov, Alexey Y., Basu, Soumendra N., Gopalan, Srikanth, and Pal, Uday B. Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles.  Netherlands: N. p., 2020. 
        Web.  doi:10.1016/j.jpowsour.2019.227357.

Copy to clipboard


                    Gasper, Paul J., Lu, Yanchen, Nikiforov, Alexey Y., Basu, Soumendra N., Gopalan, Srikanth, & Pal, Uday B. Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles.  Netherlands.  doi:10.1016/j.jpowsour.2019.227357.

Copy to clipboard


                    Gasper, Paul J., Lu, Yanchen, Nikiforov, Alexey Y., Basu, Soumendra N., Gopalan, Srikanth, and Pal, Uday B. Wed .  
        "Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles".  Netherlands.  doi:10.1016/j.jpowsour.2019.227357.

Copy to clipboard


                    
@article{osti_1573881,

  title        = {Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles},

  author       = {Gasper, Paul J. and Lu, Yanchen and Nikiforov, Alexey Y. and Basu, Soumendra N. and Gopalan, Srikanth and Pal, Uday B.},

  abstractNote = {},

  doi          = {10.1016/j.jpowsour.2019.227357},

  journal      = {Journal of Power Sources},

  number       = C,

  volume       = 447,

  place        = {Netherlands},

  year         = {2020},

  month        = {1}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

This content will become publicly available on November 11, 2020

Publisher's Version of Record

DOI: 10.1016/j.jpowsour.2019.227357

Other availability

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Composite Cathode for High-Power Density Solid Oxide Fuel Cells

Technical Report Ilwon Kim ; Scott Barnett ; Yi Jiang ; ...

Reduction of solid oxide fuel cell (SOFC) operating temperature will play a key role in reducing the stack cost by allowing the use of low-cost metallic interconnects and new approaches to sealing, while making applications such as transportation more feasible. Reported results for anode-supported SOFCs show that cathode polarization resistance is the primary barrier to achieving high power densities at operating temperatures of 700 C and lower. This project aims to identify and develop composite cathodes that could reduce SOFC operating temperatures below 700 C. This effort focuses on study and use of (La,Sr)(Co,Fe)O{sub 3} (LSCF) based composite cathodes, whichmore »« less
DOI: 10.2172/882534

Full Text Available
Nanostructured ceria based thin films ({<=}1 {mu}m) As cathode/electrolyte interfaces

Journal Article Hierso, J. ; Boy, P. ; Valle, K. ; ... - Journal of Solid State Chemistry

Gadolinium doped cerium oxide (CGO: Ce{sub 0,9}Gd{sub 0,1}O{sub 2-{delta}}) films were used as an oxygen anion diffusion layer at the cathode/electrolyte interface of Solid Oxide Fuel Cells (SOFCs), between LSCF (lanthanum strontium cobalt ferrite) and YSZ (yttria-stabilized zirconia). Thin ({approx}100 nm) and thick ({approx}700 nm) mesoporous CGO layers were synthesized through a sol-gel process including organic template coupled with the dip-coating method. Structural and microstructural characterizations were performed, highlighting a well-bonded crystalline CGO nanoparticles network which delineates a 3-D inter-connected mesoporous network. Their electrical behaviors were investigated by impedance spectroscopy analysis of YSZ/mesoporous-CGO/LSCF half-cell. Anode-supported SOFCs, operating at 800 Degree-Signmore »« less
DOI: 10.1016/J.JSSC.2012.08.021
Determination of Electrochemical Performance and Thermo-Mechanical-Chemical Stability of SOFCs from Defect Modeling

Technical Report Eric Wachsman ; Keith L. Duncan

This research was focused on two distinct but related issues. The first issue concerned using defect modeling to understand the relationship between point defect concentration and the electrochemical, thermo-chemical and mechano-chemical properties of typical solid oxide fuel cell (SOFC) materials. The second concerned developing relationships between the microstructural features of SOFC materials and their electrochemical performance. To understand the role point defects play in ceramics, a coherent analytical framework was used to develop expressions for the dependence of thermal expansion and elastic modulus on point defect concentration in ceramics. These models, collectively termed the continuum-level electrochemical model (CLEM), were validatedmore »« less
DOI: 10.2172/908258

Full Text Available
Electrochemical characteristics of samaria-doped ceria infiltrated strontium-doped LaMnO3 cathodes with varied thickness for yttria-stabilized zirconia electrolytes

Journal Article Dong Ding ; Mingyang Gonga ; Chunchuan Xu ; ... - Journal of Power Sources

Samaria-doped ceria (SDC) infiltrated into strontium-doped LaMnO3 (LSM) cathodes with varied cathode thickness on yttria-stabilized zirconia (YSZ) were investigated via symmetrical cell, half cell, and full cell configurations. The results of the symmetrical cells showed that the interfacial polarization resistance (RP) decreased with increasing electrode thickness up to∼30m, and further increases in the thickness of the cathode did not cause significant variation of electrode performance. At 800 ◦C, the minimum RP was around 0.05cm2. The impedance spectra indicated that three main electrochemical processes existed, possibly corresponding to the oxygen ion incorporation, surface diffusion of oxygen species and oxygen adsorption andmore »« less
Cost-effective Manufacturing and Morphological Stabilization of Nanostructured Cathodes for Commercial SOFCs

Technical Report Gorte, Raymond J.

The overall goals of the program were to develop methods for preparing and stabilizing SOFC electrodes by infiltration that can be manufactured on a practical scale, then transfer those methods to cells in stacks. Cathodes prepared by infiltration of nanoparticles into a porous scaffold of the electrolyte have demonstrated outstanding electrochemical performance and mechanical strength but are difficult to manufacture due to the large number of infiltration steps required to produce a conductive composite and show poor stability due to sintering of the nanoparticles. At Penn, the main goal was to develop a fabrication method that uses only a smallmore »« less
DOI: 10.2172/1461485

Full Text Available

Similar Records