Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application

Paradis, Charles J.; McKay, Larry D.; Perfect, Edmund; Istok, Jonathan D.; Hazen, Terry C.

doi:10.1007/s10040-018-1879-y

Title: Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application

Abstract

In a recent article by Paradis et al. (2018), an error was made when developing a conceptual model and an analytical solution to describe the one-dimensional displacement of the center of mass of a non-reactive tracer during a single-well injection, drift, and extraction test (push-pull test).

Authors:

Paradis, Charles J. ^[1]; McKay, Larry D. ^[1]; Perfect, Edmund ^[1]; Istok, Jonathan D. ^[2]; Hazen, Terry C. ^[3]

Univ. of Tennessee, Knoxville, TN (United States). Dept. of Earth and Planetary Sciences
Oregon State Univ., Corvallis, OR (United States). School of Civil and Construction Engineering
Univ. of Tennessee, Knoxville, TN (United States). Dept. of Earth and Planetary Sciences; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Biosciences Division; Univ. of Tennessee, Knoxville, TN (United States). Dept. of Microbiology; Univ. of Tennessee, Knoxville, TN (United States). Center for Environmental Biotechnology; Univ. of Tennessee, Knoxville, TN (United States). Inst. for a Secure and Sustainable Environment

Publication Date:: Tue Oct 23 00:00:00 EDT 2018

Research Org.:: Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

Sponsoring Org.:: USDOE Office of Science (SC)

OSTI Identifier:: 1571964

Grant/Contract Number:: AC02-05CH11231

Resource Type:: Accepted Manuscript

Journal Name:: Hydrogeology Journal

Additional Journal Information:: Journal Volume: 27; Journal Issue: 1; Journal ID: ISSN 1431-2174

Publisher:: Springer

Country of Publication:: United States

Language:: English

Subject:: 58 GEOSCIENCES

Citation Formats


                    Paradis, Charles J., McKay, Larry D., Perfect, Edmund, Istok, Jonathan D., and Hazen, Terry C. Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application.  United States: N. p., 2018. 
Web.  doi:10.1007/s10040-018-1879-y.

Copy to clipboard


                    Paradis, Charles J., McKay, Larry D., Perfect, Edmund, Istok, Jonathan D., & Hazen, Terry C. Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application.  United States.  https://doi.org/10.1007/s10040-018-1879-y

Copy to clipboard


                    Paradis, Charles J., McKay, Larry D., Perfect, Edmund, Istok, Jonathan D., and Hazen, Terry C. Tue .  
"Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application".  United States.  https://doi.org/10.1007/s10040-018-1879-y.  https://www.osti.gov/servlets/purl/1571964.

Copy to clipboard


                    
@article{osti_1571964,

  title        = {Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application},

  author       = {Paradis, Charles J. and McKay, Larry D. and Perfect, Edmund and Istok, Jonathan D. and Hazen, Terry C.},

  abstractNote = {In a recent article by Paradis et al. (2018), an error was made when developing a conceptual model and an analytical solution to describe the one-dimensional displacement of the center of mass of a non-reactive tracer during a single-well injection, drift, and extraction test (push-pull test).},

  doi          = {10.1007/s10040-018-1879-y},

  journal      = {Hydrogeology Journal},

  number       = 1,

  volume       = 27,

  place        = {United States},

  year         = {Tue Oct 23 00:00:00 EDT 2018},

  month        = {Tue Oct 23 00:00:00 EDT 2018}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1007/s10040-018-1879-y

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 3 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

A Method for Estimating Effective Porosity and Ground-Water Velocity
journal, March 1991

Hall, Stephen H.; Luttrell, Stuart P.; Cronin, William E.
Ground Water, Vol. 29, Issue 2
DOI: 10.1111/j.1745-6584.1991.tb00506.x

Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application
journal, October 2017

Paradis, Charles J.; McKay, Larry D.; Perfect, Edmund
Hydrogeology Journal, Vol. 26, Issue 2
DOI: 10.1007/s10040-017-1672-3

Similar Records in DOE PAGES and OSTI.GOV collections:

Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application

Journal Article Paradis, Charles J. ; McKay, Larry D. ; Perfect, Edmund ; ... - Hydrogeology Journal

© 2017, The Author(s). The analytical solution describing the one-dimensional displacement of the center of mass of a tracer during an injection, drift, and extraction test (push-pull test) was expanded to account for displacement during the injection phase. The solution was expanded to improve the in situ estimation of effective porosity. The truncated equation assumed displacement during the injection phase was negligible, which may theoretically lead to an underestimation of the true value of effective porosity. To experimentally compare the expanded and truncated equations, single-well push-pull tests were conducted across six test wells located in a shallow, unconfined aquifer comprisedmore »« less
Cited by 17
https://doi.org/10.1007/s10040-017-1672-3

Full Text Available
Single-Well Push–Pull Tracer Test Analyses to Determine Aquifer Reactive Transport Parameters at a Former Uranium Mill Site (Grand Junction, Colorado)

Journal Article Johnson, Raymond H. ; Paradis, Charles J. ; Kent, Ronald D. ; ... - Minerals

At a former uranium mill site where tailings have been removed, prior work has determined several potential ongoing secondary uranium sources. These include locations with uranium sorbed to organic carbon, uranium in the unsaturated zone, and uranium associated with the presence of gypsum. To better understand uranium mobility controls at the site, four single-well push–pull tests (with a drift phase) were completed with the goal of deriving aquifer flow and contaminant transport parameters for inclusion in a future sitewide reactive transport model. This goes beyond the traditional use of a constant sorption distribution coefficient (K_d) and allows for the evaluationmore »« less
https://doi.org/10.3390/min13020228

Full Text Available
Simplified method of ``push-pull`` test data analysis for determining in situ reaction rate coefficients

Journal Article Haggerty, R ; Schroth, M H ; Istok, J D - Ground Water

The single-well, ``push-pull`` test method is useful for obtaining information on a wide variety of aquifer physical, chemical, and microbiological characteristics. A push-pull test consists of the pulse-type injection of a prepared test solution into a single monitoring well followed by the extraction of the test solution/ground water mixture from the same well. The test solution contains a conservative tracer and one or more reactants selected to investigate a particular process. During the extraction phase, the concentrations of tracer, reactants, and possible reaction products are measured to obtain breakthrough curves for all solutes. This paper presents a simplified method ofmore »« less
https://doi.org/10.1111/j.1745-6584.1998.tb01097.x
Push-pull test for in-situ determination of microbial metabolic activities: Denitrification and methanogenesis. Master`s thesis

Thesis/Dissertation Odenthal, P J

Quantitative information on subsurface microbial processes is needed for many applications, but information obtained by existing methods can be difficult to interpret. The goal of this project was to develop a single well, `push-pull` test for the determination of in situ microbial metabolic activities. The method consists of an injection of a test solution into an existing monitoring well followed by the extraction of the groundwater/test solution mixture from the same well. The test solution consists of a tracer and one or more reactive solutes selected to investigate the activity of a specific microbial system. During the extraction phase, themore »« less
Evaluation of the In Situ Aerobic Cometabolism of Chlorinated Ethenes by Toluene-Utilizing Microorganisms Using Push-Pull Tests

Conference Azizian, Mohammad F ; Istok, Jonathan ; Semprini, Lewis

Single-well-push-pull tests were used in a contaminated aquifer to evaluate the ability of toluene-oxidizing microorganisms to aerobically cometabolize chlorinated aliphatic hydrocarbons (CAHs) such as trichloroethene (TCE). Groundwater containing dissolved toluene was injected into the saturated zone in biostimulate indigenous toluene-utilizers. The test solution was injected into the aquifer using a standard monitoring well and then was transported under natural-gradient conditions. Transport tests demonstrated similar transport characteristics of the conservative tracer and the reactive solutes. Biostimulation tests were then performed by injecting a test solution containing dissolved toluene substrate, hydrogen peroxide, bromide and nitrate in order to increase the biomass ofmore »« less
Full Text Available

Similar Records

Title: Correction: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application

Abstract

Citation Formats

A Method for Estimating Effective Porosity and Ground-Water Velocity journal, March 1991

Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application journal, October 2017

A Method for Estimating Effective Porosity and Ground-Water Velocity
journal, March 1991

Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application
journal, October 2017