Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
- Authors:
-
- Univ. of Tennessee, Knoxville, TN (United States)
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- CNS/Y-12 National Security Complex, Oak Ridge, TN (United States)
- Publication Date:
- Research Org.:
- Argonne National Lab. (ANL), Argonne, IL (United States); Oak Ridge Y-12 Plant (Y-12), Oak Ridge, TN (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities Division; USDOE National Nuclear Security Administration (NNSA)
- OSTI Identifier:
- 1504438
- Alternate Identifier(s):
- OSTI ID: 1477038; OSTI ID: 1493501; OSTI ID: 1569670
- Report Number(s):
- IROS6359; IROS7659; LLNL-JRNL-783860
Journal ID: ISSN 0264-1275; 151384
- Grant/Contract Number:
- AC02-06CH11357; NA0001942; AC52-07NA27344
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Materials & Design
- Additional Journal Information:
- Journal Volume: 164; Journal ID: ISSN 0264-1275
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; additive manufacturing; porosity; selective laser melting; stainless steel; texture; tomography; synchrotron; diffraction; defects
Citation Formats
Choo, Hahn, Sham, Kin-Ling, Bohling, John, Ngo, Austin, Xiao, Xianghui, Ren, Yang, Depond, Philip J., Matthews, Manyalibo J., and Garlea, Elena. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. United States: N. p., 2018.
Web. doi:10.1016/j.matdes.2018.12.006.
Choo, Hahn, Sham, Kin-Ling, Bohling, John, Ngo, Austin, Xiao, Xianghui, Ren, Yang, Depond, Philip J., Matthews, Manyalibo J., & Garlea, Elena. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel. United States. https://doi.org/10.1016/j.matdes.2018.12.006
Choo, Hahn, Sham, Kin-Ling, Bohling, John, Ngo, Austin, Xiao, Xianghui, Ren, Yang, Depond, Philip J., Matthews, Manyalibo J., and Garlea, Elena. Thu .
"Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel". United States. https://doi.org/10.1016/j.matdes.2018.12.006. https://www.osti.gov/servlets/purl/1504438.
@article{osti_1504438,
title = {Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel},
author = {Choo, Hahn and Sham, Kin-Ling and Bohling, John and Ngo, Austin and Xiao, Xianghui and Ren, Yang and Depond, Philip J. and Matthews, Manyalibo J. and Garlea, Elena},
abstractNote = {},
doi = {10.1016/j.matdes.2018.12.006},
journal = {Materials & Design},
number = ,
volume = 164,
place = {United States},
year = {Thu Dec 06 00:00:00 EST 2018},
month = {Thu Dec 06 00:00:00 EST 2018}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Cited by: 129 works
Citation information provided by
Web of Science
Web of Science
Figures / Tables:
Fig. 1: Synchrotron X-ray tomography images of as-printed316L SS cylinders (grey) and defects (red ellipsoids)measured as a function of the laser power applied during the L-PBF process. (a) 380 W, (b) 320 W, (c) 260 W, and (d) 200 W. The dimensions of the cylinders shown here are 1.43 mmmore »
All figures and tables
(16 total)
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Additive manufacturing of metals
journal, September 2016
- Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric
- Acta Materialia, Vol. 117
Flexible manufacturing of metallic products by selective laser melting of powder
journal, September 2006
- Osakada, Kozo; Shiomi, Masanori
- International Journal of Machine Tools and Manufacture, Vol. 46, Issue 11
Metal Additive Manufacturing: A Review
journal, April 2014
- Frazier, William E.
- Journal of Materials Engineering and Performance, Vol. 23, Issue 6
Direct selective laser sintering of metals
journal, March 1995
- Agarwala, Mukesh; Bourell, David; Beaman, Joseph
- Rapid Prototyping Journal, Vol. 1, Issue 1
Selective laser melting of iron-based powder
journal, June 2004
- Kruth, J. P.; Froyen, L.; Van Vaerenbergh, J.
- Journal of Materials Processing Technology, Vol. 149, Issue 1-3
Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting
journal, April 2015
- Yadroitsev, Igor; Yadroitsava, Ina
- Virtual and Physical Prototyping, Vol. 10, Issue 2
Effects of laser sintering processing parameters on the microstructure and densification of iron powder
journal, October 2003
- Simchi, A.; Pohl, H.
- Materials Science and Engineering: A, Vol. 359, Issue 1-2
Selective laser melting of stainless steel 316L with low porosity and high build rates
journal, August 2016
- Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng
- Materials & Design, Vol. 104
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
journal, January 2017
- Scipioni Bertoli, Umberto; Wolfer, Alexander J.; Matthews, Manyalibo J.
- Materials & Design, Vol. 113
Quantitative X-ray tomography
journal, December 2013
- Maire, E.; Withers, P. J.
- International Materials Reviews, Vol. 59, Issue 1
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters
journal, August 2017
- Zhang, Meng; Sun, Chen-Nan; Zhang, Xiang
- Materials Science and Engineering: A, Vol. 703
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
journal, November 2017
- Liverani, E.; Toschi, S.; Ceschini, L.
- Journal of Materials Processing Technology, Vol. 249
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
journal, September 2014
- Cherry, J. A.; Davies, H. M.; Mehmood, S.
- The International Journal of Advanced Manufacturing Technology, Vol. 76, Issue 5-8
X-ray microtomography of materials
journal, April 1999
- Stock, S. R.
- International Materials Reviews, Vol. 44, Issue 4
Recent advances in X-ray microtomography applied to materials
journal, May 2008
- Stock, S. R.
- International Materials Reviews, Vol. 53, Issue 3
X-ray microtomography
journal, December 2010
- Landis, Eric N.; Keane, Denis T.
- Materials Characterization, Vol. 61, Issue 12
Advances in synchrotron radiation microtomography
journal, July 2006
- Baruchel, José; Buffiere, Jean-Yves; Cloetens, Peter
- Scripta Materialia, Vol. 55, Issue 1
A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys
journal, October 2010
- Kastner, Johann; Harrer, Bernhard; Requena, Guillermo
- NDT & E International, Vol. 43, Issue 7
Damage evolution and failure mechanisms in additively manufactured stainless steel
journal, January 2016
- Carlton, Holly D.; Haboub, Abdel; Gallegos, Gilbert F.
- Materials Science and Engineering: A, Vol. 651
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
journal, October 2015
- Olakanmi, E. O.; Cochrane, R. F.; Dalgarno, K. W.
- Progress in Materials Science, Vol. 74
An investigation of the effect of laser deposition parameters on characteristics of multilayered 316 L deposits
journal, May 2014
- Amine, Tarak; Newkirk, Joseph W.; Liou, Frank
- The International Journal of Advanced Manufacturing Technology, Vol. 73, Issue 9-12
Denudation of metal powder layers in laser powder bed fusion processes
journal, August 2016
- Matthews, Manyalibo J.; Guss, Gabe; Khairallah, Saad A.
- Acta Materialia, Vol. 114
Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material
journal, March 2013
- Ciurana, Joaquim; Hernandez, Luis; Delgado, Jordi
- The International Journal of Advanced Manufacturing Technology, Vol. 68, Issue 5-8
TomoPy: a framework for the analysis of synchrotron tomographic data
journal, August 2014
- Gürsoy, Dogˇa; De Carlo, Francesco; Xiao, Xianghui
- Journal of Synchrotron Radiation, Vol. 21, Issue 5
Fiji: an open-source platform for biological-image analysis
journal, June 2012
- Schindelin, Johannes; Arganda-Carreras, Ignacio; Frise, Erwin
- Nature Methods, Vol. 9, Issue 7
FIT2D : a multi-purpose data reduction, analysis and visualization program
journal, March 2016
- Hammersley, A. P.
- Journal of Applied Crystallography, Vol. 49, Issue 2
Maud: a Rietveld analysis program designed for the internet and experiment integration
journal, August 2000
- Lutterotti, L.
- Acta Crystallographica Section A Foundations of Crystallography, Vol. 56, Issue s1
Texture Analysis with MTEX – Free and Open Source Software Toolbox
journal, February 2010
- Bachmann, F.; Hielscher, Ralf; Schaeben, Helmut
- Solid State Phenomena, Vol. 160
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
journal, April 2016
- Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander
- Acta Materialia, Vol. 108
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
journal, May 2010
- Thijs, Lore; Verhaeghe, Frederik; Craeghs, Tom
- Acta Materialia, Vol. 58, Issue 9
Corrigendum to “Selective laser melting of stainless steel 316L with low porosity and high build rates” [Mater. Des. 104 (2016) 197–204]
journal, July 2017
- Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng
- Materials & Design, Vol. 126
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
journal, March 2018
- Kurzynowski, Tomasz; Gruber, Konrad; Stopyra, Wojciech
- Materials Science and Engineering: A, Vol. 718
Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
journal, January 2016
- Cunningham, Ross; Narra, Sneha P.; Ozturk, Tugce
- JOM, Vol. 68, Issue 3
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
journal, December 2014
- King, Wayne E.; Barth, Holly D.; Castillo, Victor M.
- Journal of Materials Processing Technology, Vol. 214, Issue 12
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium
journal, August 2007
- Rai, R.; Elmer, J. W.; Palmer, T. A.
- Journal of Physics D: Applied Physics, Vol. 40, Issue 18
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
journal, March 2013
- Thijs, Lore; Kempen, Karolien; Kruth, Jean-Pierre
- Acta Materialia, Vol. 61, Issue 5
Hardened austenite steel with columnar sub-grain structure formed by laser melting
journal, February 2015
- Saeidi, K.; Gao, X.; Zhong, Y.
- Materials Science and Engineering: A, Vol. 625
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
journal, March 2016
- Zhong, Yuan; Liu, Leifeng; Wikman, Stefan
- Journal of Nuclear Materials, Vol. 470
Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
journal, January 2017
- Cunningham, Ross; Narra, Sneha P.; Montgomery, Colt
- JOM, Vol. 69, Issue 3
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
journal, June 2016
- Wang, Di; Song, Changhui; Yang, Yongqiang
- Materials & Design, Vol. 100
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
journal, May 2016
- Wang, Zhuqing; Palmer, Todd A.; Beese, Allison M.
- Acta Materialia, Vol. 110
Additively manufactured hierarchical stainless steels with high strength and ductility
journal, October 2017
- Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T.
- Nature Materials, Vol. 17, Issue 1
The role of recoil pressure in energy balance during laser materials processing
journal, September 1997
- Semak, Vladimir; Matsunawa, Akira
- Journal of Physics D: Applied Physics, Vol. 30, Issue 18
Works referencing / citing this record:
Microstructure–Texture–Mechanical Property Relationship in Alloys Produced by Additive Manufacturing Following Selective Laser Melting (SLM) Technique
journal, January 2020
- Suwas, Satyam; Kumar, Deepak
- Transactions of the Indian National Academy of Engineering, Vol. 5, Issue 1
Tensile Deformation and Fracture Behaviors of a Nickel-Based Superalloy via In Situ Digital Image Correlation and Synchrotron Radiation X-ray Tomography
journal, August 2019
- Zhu, Qiang; Chen, Gang; Wang, Chuanjie
- Materials, Vol. 12, Issue 15
On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion
journal, January 2020
- Caiazzo, Fabrizia; Alfieri, Vittorio; Casalino, Giuseppe
- Materials, Vol. 13, Issue 3
Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
journal, August 2019
- Kiss, Andrew M.; Fong, Anthony Y.; Calta, Nicholas P.
- Advanced Engineering Materials, Vol. 21, Issue 10
Non-isothermal Phase-Field Modeling of Heat–Melt–Microstructure-Coupled Processes During Powder Bed Fusion
journal, April 2020
- Yang, Yangyiwei; Kühn, Patrick; Yi, Min
- JOM, Vol. 72, Issue 4
Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
journal, October 2019
- Kiss, Andrew M.; Fong, Anthony Y.; Calta, Nicholas P.
- Advanced Engineering Materials, Vol. 21, Issue 10
Figures / Tables found in this record:
Figures/Tables have been extracted from DOE-funded journal article accepted manuscripts.