DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Customizable Nonplanar Printing of Lithium‐Ion Batteries

 [1];  [2];  [1];  [1];  [1];  [1];  [3];  [1];  [2]; ORCiD logo [1]
  1. Department of Mechanical and Aerospace Engineering Missouri University of Science and Technology Rolla MO 65401 USA
  2. Department of Mechanical Engineering Worcester Polytechnic Institute Worcester MA 01609 USA
  3. Kansas City National Security Campus Honeywell Federal Manufacturing &, Technology LLC Kansas City MO 64147 USA
Publication Date:
Sponsoring Org.:
OSTI Identifier:
Resource Type:
Publisher's Accepted Manuscript
Journal Name:
Advanced Materials Technologies
Additional Journal Information:
Journal Name: Advanced Materials Technologies Journal Volume: 4 Journal Issue: 11; Journal ID: ISSN 2365-709X
Wiley Blackwell (John Wiley & Sons)
Country of Publication:
United States

Citation Formats

Yu, Xiaowei, Liu, Yangtao, Pham, Hiep, Sarkar, Susmita, Ludwig, Brandon, Chen, I‐Meng, Everhart, Wesley, Park, Jonghyun, Wang, Yan, and Pan, Heng. Customizable Nonplanar Printing of Lithium‐Ion Batteries. United States: N. p., 2019. Web. doi:10.1002/admt.201900645.
Yu, Xiaowei, Liu, Yangtao, Pham, Hiep, Sarkar, Susmita, Ludwig, Brandon, Chen, I‐Meng, Everhart, Wesley, Park, Jonghyun, Wang, Yan, & Pan, Heng. Customizable Nonplanar Printing of Lithium‐Ion Batteries. United States.
Yu, Xiaowei, Liu, Yangtao, Pham, Hiep, Sarkar, Susmita, Ludwig, Brandon, Chen, I‐Meng, Everhart, Wesley, Park, Jonghyun, Wang, Yan, and Pan, Heng. Mon . "Customizable Nonplanar Printing of Lithium‐Ion Batteries". United States.
title = {Customizable Nonplanar Printing of Lithium‐Ion Batteries},
author = {Yu, Xiaowei and Liu, Yangtao and Pham, Hiep and Sarkar, Susmita and Ludwig, Brandon and Chen, I‐Meng and Everhart, Wesley and Park, Jonghyun and Wang, Yan and Pan, Heng},
abstractNote = {},
doi = {10.1002/admt.201900645},
journal = {Advanced Materials Technologies},
number = 11,
volume = 4,
place = {United States},
year = {2019},
month = {9}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 1 work
Citation information provided by
Web of Science

Save / Share:

Works referenced in this record:

Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO4 Electrodes by Low Temperature Direct Writing Process
journal, August 2017

  • Liu, Changyong; Cheng, Xingxing; Li, Bohan
  • Materials, Vol. 10, Issue 8
  • DOI: 10.3390/ma10080934

Performance and Stability of Aerosol-Jet-Printed Electrolyte-Gated Transistors Based on Poly(3-hexylthiophene)
journal, July 2013

  • Kim, Se Hyun; Hong, Kihyon; Lee, Keun Hyung
  • ACS Applied Materials & Interfaces, Vol. 5, Issue 14
  • DOI: 10.1021/am401200y

Ultrahigh-Energy-Density Microbatteries Enabled by New Electrode Architecture and Micropackaging Design
journal, May 2010

  • Lai, Wei; Erdonmez, Can K.; Marinis, Thomas F.
  • Advanced Materials, Vol. 22, Issue 20
  • DOI: 10.1002/adma.200903650

Controlling and assessing the quality of aerosol jet printed features for large area and flexible electronics
journal, February 2017

  • Smith, Michael; Choi, Yeon Sik; Boughey, Chess
  • Flexible and Printed Electronics, Vol. 2, Issue 1
  • DOI: 10.1088/2058-8585/aa5af9

3D-Printing Electrolytes for Solid-State Batteries
journal, March 2018

  • McOwen, Dennis W.; Xu, Shaomao; Gong, Yunhui
  • Advanced Materials, Vol. 30, Issue 18
  • DOI: 10.1002/adma.201707132

Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources
journal, November 2017

Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies
journal, January 2014

Macro-/Micro-Controlled 3D Lithium-Ion Batteries via Additive Manufacturing and Electric Field Processing
journal, January 2018

Ink-jet printed porous composite LiFePO 4 electrode from aqueous suspension for microbatteries
journal, August 2015

Additive Manufacturing Technologies Compared: Morphology of Deposits of Silver Ink Using Inkjet and Aerosol Jet Printing
journal, January 2015

  • Seifert, Tobias; Sowade, Enrico; Roscher, Frank
  • Industrial & Engineering Chemistry Research, Vol. 54, Issue 2
  • DOI: 10.1021/ie503636c

Additive Manufacturing: Rethinking Battery Design
journal, January 2016

The Effect of Droplet Sizes on Overspray in Aerosol-Jet Printing
journal, April 2018

  • Chen, Guang; Gu, Yuan; Tsang, Harvey
  • Advanced Engineering Materials, Vol. 20, Issue 8
  • DOI: 10.1002/adem.201701084

Electrolyte-resistant epoxy for bonding batteries based on sandwich structures: Research Article
journal, December 2017

  • Seo, Jiho; Singh, Abhendra K.; Zhang, Yancheng
  • Journal of Applied Polymer Science, Vol. 135, Issue 15
  • DOI: 10.1002/app.46059

3D Porous Sponge-Inspired Electrode for Stretchable Lithium-Ion Batteries
journal, March 2016

Three-dimensional microarchitected materials and devices using nanoparticle assembly by pointwise spatial printing
journal, March 2017

  • Saleh, Mohammad Sadeq; Hu, Chunshan; Panat, Rahul
  • Science Advances, Vol. 3, Issue 3
  • DOI: 10.1126/sciadv.1601986

Stretchable Lithium-Ion Batteries Enabled by Device-Scaled Wavy Structure and Elastic-Sticky Separator
journal, July 2017

Highly Stable Ni-Based Flexible Transparent Conducting Panels Fabricated by Laser Digital Patterning
journal, January 2019

  • Nam, Vu Binh; Shin, Jaeho; Yoon, Yeosang
  • Advanced Functional Materials, Vol. 29, Issue 8
  • DOI: 10.1002/adfm.201806895

3D Printing of Interdigitated Li-Ion Microbattery Architectures
journal, June 2013

  • Sun, Ke; Wei, Teng-Sing; Ahn, Bok Yeop
  • Advanced Materials, Vol. 25, Issue 33, p. 4539-4543
  • DOI: 10.1002/adma.201301036

Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
journal, February 2016

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
journal, August 2018

Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates
journal, October 2012

  • Li, N.; Chen, Z.; Ren, W.
  • Proceedings of the National Academy of Sciences, Vol. 109, Issue 43
  • DOI: 10.1073/pnas.1210072109

Low temperature thermal engineering of nanoparticle ink for flexible electronics applications
journal, June 2016

Aerosol Jet Printing of Nano Particle Based Electrical Chip Interconnects
journal, January 2015

3D Printing of Customized Li-Ion Batteries with Thick Electrodes
journal, March 2018

  • Wei, Teng-Sing; Ahn, Bok Yeop; Grotto, Julia
  • Advanced Materials, Vol. 30, Issue 16
  • DOI: 10.1002/adma.201703027

Uniform Aerosol Jet printed polymer lines with 30μm width for 140ppi resolution RGB organic light emitting diodes
journal, July 2015

Li-ion battery materials: present and future
journal, June 2015

Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique
journal, March 2008

Integration issues of lithium-ion battery into electric vehicles battery pack
journal, February 2016

Intense pulsed light sintering of copper nanoink for printed electronics
journal, August 2009

Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach
journal, October 2018

  • Wang, Jiwei; Sun, Qian; Gao, Xuejie
  • ACS Applied Materials & Interfaces, Vol. 10, Issue 46
  • DOI: 10.1021/acsami.8b14797

Self-Supported Li 4 Ti 5 O 12 –C Nanotube Arrays as High-Rate and Long-Life Anode Materials for Flexible Li-Ion Batteries
journal, April 2014

  • Liu, Jun; Song, Kepeng; van Aken, Peter A.
  • Nano Letters, Vol. 14, Issue 5
  • DOI: 10.1021/nl5004174

High Capacity Rate Capable Aerosol Jet Printed Li‐Ion Battery Cathode
journal, February 2019

  • Deiner, L. Jay; Jenkins, Thomas; Powell, Amber
  • Advanced Engineering Materials, Vol. 21, Issue 5
  • DOI: 10.1002/adem.201801281

Latest advances in the manufacturing of 3D rechargeable lithium microbatteries
journal, July 2015

Direct writing of Cu-based micro-temperature detectors using femtosecond laser reduction of CuO nanoparticles
journal, January 2016

  • Mizoshiri, Mizue; Arakane, Shun; Sakurai, Junpei
  • Applied Physics Express, Vol. 9, Issue 3
  • DOI: 10.7567/APEX.9.036701

Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
journal, January 2018

  • Lacey, Steven D.; Kirsch, Dylan J.; Li, Yiju
  • Advanced Materials, Vol. 30, Issue 12
  • DOI: 10.1002/adma.201705651

Advanced Materials for Printed Wearable Electrochemical Devices: A Review
journal, December 2016

  • Kim, Jayoung; Kumar, Rajan; Bandodkar, Amay J.
  • Advanced Electronic Materials, Vol. 3, Issue 1
  • DOI: 10.1002/aelm.201600260

3D printed electrochemical energy storage devices
journal, January 2019

  • Chang, Peng; Mei, Hui; Zhou, Shixiang
  • Journal of Materials Chemistry A, Vol. 7, Issue 9
  • DOI: 10.1039/C8TA11860D

Laser-printed thick-film electrodes for solid-state rechargeable Li-ion microbatteries
journal, February 2007

Micro-scale aerosol-jet printing of graphene interconnects
journal, September 2015

3D direct writing fabrication of electrodes for electrochemical storage devices
journal, June 2017

Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines
journal, May 2013

  • Mahajan, Ankit; Frisbie, C. Daniel; Francis, Lorraine F.
  • ACS Applied Materials & Interfaces, Vol. 5, Issue 11
  • DOI: 10.1021/am400606y

Thin, Flexible Secondary Li-Ion Paper Batteries
journal, September 2010

  • Hu, Liangbing; Wu, Hui; La Mantia, Fabio
  • ACS Nano, Vol. 4, Issue 10, p. 5843-5848
  • DOI: 10.1021/nn1018158

Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution
journal, March 2010

Direct Aerosol Printing of Lithium-ion Batteries
journal, October 2017

  • Yu, Xiaowei; Chen, I-Meng; Sarkar, Susmita
  • International Symposium on Microelectronics, Vol. 2017, Issue 1
  • DOI: 10.4071/isom-2017-WP25_161

Potential of lithium-ion batteries in renewable energy
journal, April 2015

A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing
journal, April 2017

Analysis of Droplet Evaporation on a Superhydrophobic Surface
journal, November 2005

  • McHale, G.; Aqil, S.; Shirtcliffe, N. J.
  • Langmuir, Vol. 21, Issue 24
  • DOI: 10.1021/la0518795

Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes
journal, August 2012

Nanoparticle Selective Laser Processing for a Flexible Display Fabrication
journal, May 2010

  • Ko, Seung Hwan; Pan, Heng; Lee, Daeho
  • Japanese Journal of Applied Physics, Vol. 49, Issue 5
  • DOI: 10.1143/JJAP.49.05EC03

3D printing technologies for electrochemical energy storage
journal, October 2017

Analytical Investigation of Aerosol Jet Printing
journal, August 2014

Towards greener and more sustainable batteries for electrical energy storage
journal, November 2014

3D-Printed All-Fiber Li-Ion Battery toward Wearable Energy Storage
journal, September 2017

  • Wang, Yibo; Chen, Chaoji; Xie, Hua
  • Advanced Functional Materials, Vol. 27, Issue 43
  • DOI: 10.1002/adfm.201703140

Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems
journal, February 2013

  • Xu, Sheng; Zhang, Yihui; Cho, Jiung
  • Nature Communications, Vol. 4, Issue 1
  • DOI: 10.1038/ncomms2553

Optimization of fused deposition modeling process parameters: a review of current research and future prospects
journal, February 2015

  • Mohamed, Omar A.; Masood, Syed H.; Bhowmik, Jahar L.
  • Advances in Manufacturing, Vol. 3, Issue 1
  • DOI: 10.1007/s40436-014-0097-7

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
journal, March 2016

  • Ludwig, Brandon; Zheng, Zhangfeng; Shou, Wan
  • Scientific Reports, Vol. 6, Issue 1
  • DOI: 10.1038/srep23150