Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection

doi:10.1016/j.jcis.2018.07.052

Title: Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection

Full Record
Other Related Research

Authors:: Zhang, Yiqun; Zhou, Linsheng; Liu, Yueying; Liu, Deye; Liu, Fengmin; Liu, Fangmeng; Yan, Xu; Liang, Xishuang; Gao, Yuan; Lu, Geyu

Publication Date:: 2018-12-01

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1564285

Grant/Contract Number:: 2016YFC0201002; 61474057; 61573164; 61520106003; 2014AA06A505

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Colloid and Interface Science

Additional Journal Information:: Journal Name: Journal of Colloid and Interface Science Journal Volume: 531 Journal Issue: C; Journal ID: ISSN 0021-9797

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Zhang, Yiqun, Zhou, Linsheng, Liu, Yueying, Liu, Deye, Liu, Fengmin, Liu, Fangmeng, Yan, Xu, Liang, Xishuang, Gao, Yuan, and Lu, Geyu. Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection.  United States: N. p., 2018. 
        Web.  doi:10.1016/j.jcis.2018.07.052.

Copy to clipboard


                    Zhang, Yiqun, Zhou, Linsheng, Liu, Yueying, Liu, Deye, Liu, Fengmin, Liu, Fangmeng, Yan, Xu, Liang, Xishuang, Gao, Yuan, & Lu, Geyu. Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection.  United States.  doi:10.1016/j.jcis.2018.07.052.

Copy to clipboard


                    Zhang, Yiqun, Zhou, Linsheng, Liu, Yueying, Liu, Deye, Liu, Fengmin, Liu, Fangmeng, Yan, Xu, Liang, Xishuang, Gao, Yuan, and Lu, Geyu. Sat .  
        "Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection".  United States.  doi:10.1016/j.jcis.2018.07.052.

Copy to clipboard


                    
@article{osti_1564285,

  title        = {Gas sensor based on samarium oxide loaded mulberry-shaped tin oxide for highly selective and sub ppm-level acetone detection},

  author       = {Zhang, Yiqun and Zhou, Linsheng and Liu, Yueying and Liu, Deye and Liu, Fengmin and Liu, Fangmeng and Yan, Xu and Liang, Xishuang and Gao, Yuan and Lu, Geyu},

  abstractNote = {},

  doi          = {10.1016/j.jcis.2018.07.052},

  journal      = {Journal of Colloid and Interface Science},

  number       = C,

  volume       = 531,

  place        = {United States},

  year         = {2018},

  month        = {12}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
DOI: 10.1016/j.jcis.2018.07.052

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Sensors for detecting sub-ppm NO{sub 2} using photochemically produced amorphous tungsten oxide

Journal Article Chu, C W ; Deen, M J ; Hill, R H - Journal of the Electrochemical Society

This paper describes a new approach to making the active elements of gas sensors using a photochemical deposition method. The method involves making amorphous films of photochemically active precursors. These precursors are then exposed to light and, in air, convert to metal oxides. Amorphous films constructed of W(CO){sub 4}(Et{sub 2}-en) are deposited on interdigitated microelectrodes. Photolysis of these films, in air at room temperature, results in the deposition of amorphous films of tungsten oxide. This forms the sensing element of an NO{sub x} sensor. Films thus prepared were also annealed to yield sensors whose active elements were crystalline tungsten oxide.more »« less
DOI: 10.1149/1.1838940
Indium oxide-based gas sensor for selective detection of CO

Conference Yamaura, Hiroyuki ; Jinkawa, Teruyuki ; Tamaki, Jun ; ...

A compact solid-state CO sensor has been eagerly desired for detecting incomplete combustion of gas appliances, because continuous monitoring of CO in combustion exhausts can prevent a serious CO poisoning accident from occurring. The relevant sensor should be not only highly sensitive to CO but also selective to CO against various coexistent gases such as H{sub 2}, CH{sub 4}, C{sub 3}H{sub 6}, CO{sub 2}, NO and water vapor. In addition it should at the temperature of the exhausts (200-400 {degrees}C). In order to develop such a CO sensor, an extensive search was carried out for semiconducting oxides and modifiers. Asmore »« less
Selective CO detection by using indium oxide-based semiconductor gas sensor

Journal Article Yamaura, Hiroyuki ; Tamaki, Jun ; Miura, Norio ; ... - Journal of the Electrochemical Society

A compact, solid-state CO sensor has been in great demand for detecting incomplete combustion of gas appliances. Continuous CO monitoring of combustion exhaust can prevent a serious CO poisoning accident. From a screening test for the sensing properties of 26 single oxides, an In{sub 2}O{sub 3} sensor element was found to exhibit rather high sensitivity to both CO and H{sub 2} in wet air at 300 C. In order to improve the selectivity to CO vs. H{sub 2}, each of 33 metal oxides was added to In{sub 2}O{sub 3}. As a result, the addition of alkaline metal oxides was foundmore »« less
DOI: 10.1149/1.1836449
Analyzing the kinetic response of tin oxide-carbon and tin oxide-CNT composites gas sensors for alcohols detection

Journal Article Kamble, Vinayak ; Umarji, Arun - AIP Advances

Tin oxide nanoparticles are synthesized using solution combustion technique and tin oxide – carbon composite thick films are fabricated with amorphous carbon as well as carbon nanotubes (CNTs). The x-ray diffraction, Raman spectroscopy and porosity measurements show that the as-synthesized nanoparticles are having rutile phase with average crystallite size ∼7 nm and ∼95 m{sup 2}/g surface area. The difference between morphologies of the carbon doped and CNT doped SnO{sub 2} thick films, are characterized using scanning electron microscopy and transmission electron microscopy. The adsorption-desorption kinetics and transient response curves are analyzed using Langmuir isotherm curve fittings and modeled using powermore » law of semiconductor gas sensors.« less
DOI: 10.1063/1.4916755
Capacitive gas sensor of mixed oxide CoO-In{sub 2}O{sub 3} to selectively detect nitrogen monoxide

Journal Article Ishihara, Tatsumi ; Sato, Shinobu ; Fukushima, Tomokatsu ; ... - Journal of the Electrochemical Society

Selective detection of nitric oxide, NO, based on the capacitance change of a mixed-oxide capacitor was investigated. Since the capacitance of an oxide mixture consisting of two kinds of semiconductive oxides depends on the NO concentration, the NO concentration can be estimated from the capacitance of these mixed-oxide capacitors. In particular, the capacitance of the physical mixture of CoO and In{sub 2}O{sub 3} was highly sensitive and selective to NO. Although the sensitivity to NO was decreased, the period for recovery was extremely shortened by increasing the operating temperature. In considering the sensitivity and response characteristics, the optimum operating temperaturemore »« less
DOI: 10.1149/1.1836923

Similar Records