Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene

Cuo, Zhaxi; Deng, Yuzhou; Li, Wenhui; Peng, Shengpan; Zhao, Feng; Liu, Haidi; Chen, Yunfa

doi:10.1016/j.apsusc.2018.06.207

Title: Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene

Full Record
Other Related Research

Authors:

Cuo, Zhaxi; Deng, Yuzhou; Li, Wenhui; Peng, Shengpan; Zhao, Feng; Liu, Haidi;

Publication Date:: 2018-10-01

Sponsoring Org.:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI Identifier:: 1562996

Grant/Contract Number:: 2016YFC0207104

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Applied Surface Science

Additional Journal Information:: Journal Name: Applied Surface Science Journal Volume: 456 Journal Issue: C; Journal ID: ISSN 0169-4332

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Cuo, Zhaxi, Deng, Yuzhou, Li, Wenhui, Peng, Shengpan, Zhao, Feng, Liu, Haidi, and Chen, Yunfa. Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene.  Netherlands: N. p., 2018. 
Web.  doi:10.1016/j.apsusc.2018.06.207.

Copy to clipboard


                    Cuo, Zhaxi, Deng, Yuzhou, Li, Wenhui, Peng, Shengpan, Zhao, Feng, Liu, Haidi, & Chen, Yunfa. Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene.  Netherlands.  https://doi.org/10.1016/j.apsusc.2018.06.207

Copy to clipboard


                    Cuo, Zhaxi, Deng, Yuzhou, Li, Wenhui, Peng, Shengpan, Zhao, Feng, Liu, Haidi, and Chen, Yunfa. Mon .  
"Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene".  Netherlands.  https://doi.org/10.1016/j.apsusc.2018.06.207.

Copy to clipboard


                    
@article{osti_1562996,

  title        = {Monolithic Mn/Ce-based catalyst of fibrous ceramic membrane for complete oxidation of benzene},

  author       = {Cuo, Zhaxi and Deng, Yuzhou and Li, Wenhui and Peng, Shengpan and Zhao, Feng and Liu, Haidi and Chen, Yunfa},

  abstractNote = {},

  doi          = {10.1016/j.apsusc.2018.06.207},

  journal      = {Applied Surface Science},

  number       = C,

  volume       = 456,

  place        = {Netherlands},

  year         = {2018},

  month        = {10}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.apsusc.2018.06.207

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 24 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Fibrous monolithic ceramics; 4: Mechanical properties and oxidation behavior of the alumina/nickel system

Journal Article Baskaran, S ; Nunn, S D ; Halloran, J W - Journal of the American Ceramic Society; (United States)

Fibrous monolith ceramics were fabricated in the alumina/nickel system. The microstructure consists of high aspect-ratio polycrystalline cells of alumina separated by thin cell boundaries of nickel. The nickel content in the material is 3 to 8 vol%. The fibrous monolith with uniaxial aligned cells fails noncatastrophically in flexure. Bridging ligaments of nickel, crack deflection along cell boundaries, and crack branching in the axial direction are observed in flexure bars and notched beams. Strength values range from 246 to 375 MPa. Indentations cause controlled damage on the surface but do not introduce strength-degrading flaws. The alumina/nickel fibrous monoliths also show potentialmore »« less
https://doi.org/10.1111/j.1151-2916.1994.tb05400.x
Fibrous monolithic ceramics; 3: Mechanical properties and oxidation behavior of silicon carbide/boron nitride system

Journal Article Baskaran, S ; Halloran, J W - Journal of the American Ceramic Society; (United States)

Fibrous monolithic ceramics were fabricated in the SiC/BN system. The microstructure consists of high-aspect-ratio polycrystalline cells of SiC separated by cell boundaries of BN. The fibrous monolith with aligned cells fails non-catastrophically in flexure, with delamination cracking along the BN cell boundaries. Indentations cause controlled damage on the surface, but no strength-degrading flaws. The flexural strength is in the range 300--375 MPa, and the estimated shear strength is [approximately]14 MPa. The SiC/BN fibrous monoliths also show excellent resistance to high-temperature oxidation in air. Noncatastrophic fracture behavior is observed at room temperature after heat treatments between 1,200 and 1,500 C. Themore »« less
https://doi.org/10.1111/j.1151-2916.1994.tb05399.x
Evaluation of Mn and Sn-Modified Pd-Ce-Based Catalysts for Low-Temperature Diesel Exhaust Oxidation

Journal Article Wang, Chao ; Binder, Andrew J. ; Toops, Todd J. ; ... - Emission Control Science & Technology

Pd-impregnated Ce-based catalysts were tested for carbon monoxide (CO) and hydrocarbon (HC) oxidation under challenging low-temperature diesel combustion conditions. The results indicate that the light-off temperatures for CO over Pd/CeO₂, Pd/MnO_x-CeO₂ (Pd/MC), and Pd/SnO₂-MnO_x-CeO₂ (Pd/SMC) catalysts shift to higher temperatures in the presence of simulated diesel exhaust gas. The lowest T₅₀ for CO is observed over Pd/MC at 173 °C, whereas Pd/CeO₂ is shown to oxidize most of the HCs at temperatures below 400 °C. In all catalysts, the oxidation of HCs starts right after the onset of CO oxidation, revealing that the competitive adsorption of CO, NO, and alkenesmore »« less
https://doi.org/10.1007/s40825-016-0056-9

Full Text Available
Fibrous ceramic monoliths made from multi-phase ceramic filaments

Patent Goretta, Kenneth C ; Singh, Dileep ; Polzin, Bryant J ; ...

A method for producing composite ceramic material is provided wherein a core ceramic structure is produced and simultaneously enveloped with a sleeve of similar material.
Full Text Available
Influence of preparation procedure, nature of the active component, and support on the properties of M-Ce-Zr-O (M = Cr, Fe, Co) catalysts for complete oxidation of hydrocarbons

Journal Article Ivanova, A S ; Moroz, E M - Kinetics and Catalysis

The influence of the preparation procedure, the nature of an active component and a support on physicochemical and catalytic properties of the M-Ce-Zr-O and M-Ce-Zr-O/support systems, where M is Cr, Fe Co while a support is {gamma}- or {alpha}-Al{sub 2}O{sub 3}, is studied. The bulk samples calcined at 850{degrees}C are shown to consist of a mixture of both cubic CeO{sub 2} and ZrO{sub 2} phases and M{sub n}O{sub m} (Cr{sub 2}O{sub 3}, {alpha}-F{sub 2}O{sub 3}, and Co{sub 3}O{sub 4}). A specific catalytic activity of M-Ce-Zr-O samples in the reaction of the butane complete oxidation is equal to 1.2 x 10{supmore »« less

Similar Records