Title: Enhanced strength and ductility of a tungsten-doped CoCrNi medium-entropy alloy

Journal Article · · Journal of Materials Research

Developing metallic materials with a good combination of strength and ductility has been an unending pursuit of materials scientists. The emergence of high/medium-entropy alloys (HEA/MEA) provided a novel strategy to achieve this. In this work, we also strengthened a strong-and-ductile MEA using a traditional solid solution strengthening theory. The selection of solute elements was assisted by mechanical property and microstructure predictive models. Extensive microstructural characterizations and mechanical tests were performed to verify the models and to understand the mechanical behavior and deformation mechanisms of the designated CoCrNi–3W alloy. Our results show good experiment-model agreement. The incorporation of 3 at.% W into the ternary CoCrNi matrix increased its intrinsic strength by ~20%. External strengthening through microstructural refinement led to a yield strength nearly double that of the parent alloy, CoCrNi. The increase in strength is obtained with still good ductility when tested down to 77 K. Nanoscale twin boundaries are observed in the post-fracture microstructure under 77 K. Finally, the combination of strength and ductility after W additions deviate from the traditional strength-ductility-trade-off contour.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22). Materials Sciences & Engineering Division
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
1561621
Journal Information:
Journal of Materials Research, Journal Name: Journal of Materials Research Journal Issue: 19 Vol. 33; ISSN 0884-2914
Publisher:
Materials Research SocietyCopyright Statement
Country of Publication:
United States
Language:
English

References (48)

Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes journal May 2004
Quantitative binomial distribution analyses of nanoscale like‐solute atom clustering and segregation in atom probe tomography data journal July 2008
A Statistical Theory of Solid Solution Hardening journal January 1970
Atom-Probe Tomography book January 2014
Dispersion behaviour of oxide particles in mechanically alloyed ODS steel journal January 1995
Multi-component solid solution hardening: Part 1 Proposed model journal May 1977
Multi-component solid solution hardening: Part 2 Agreement with experimental results journal May 1977
Quantitative size-factors for metallic solid solutions journal February 1966
Solid solution hardening of copper crystals journal September 1974
Deformation twinning in silver-gold alloys journal March 1958
Statistische theorien der mischkristallhärtung journal July 1972
Perspective of ODS alloys application in nuclear environments journal December 2002
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures journal December 2014
Modelling solid solution hardening in high entropy alloys journal February 2015
Interatomic spacing distribution in multicomponent alloys journal September 2015
Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys journal November 2016
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi journal April 2017
The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy journal June 2017
Modelling mechanical properties for non-hardenable aluminium alloys journal November 2007
Phase stability, physical properties and strengthening mechanisms of concentrated solid solution alloys journal October 2017
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys journal March 2014
In-situ neutron diffraction studies on high-temperature deformation behavior in a CoCrFeMnNi high entropy alloy journal July 2015
High-entropy alloy: challenges and prospects journal July 2016
Microstructural development in equiatomic multicomponent alloys journal July 2004
The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel journal June 2010
Solid solution hardening of molybdenum–hafnium alloys: Experiments and Modeling journal January 2013
High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy journal June 2015
Mechanical properties of nanocrystalline materials journal May 2006
Microstructures and properties of high-entropy alloys journal April 2014
Dependence of deformation twinning on grain orientation in a high manganese steel journal October 2006
Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure journal November 2008
Slip nucleation in single crystal FeNiCoCrMn high entropy alloy journal February 2016
Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing journal June 2017
The Superalloys book January 2006
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures journal February 2016
Low‐Temperature Deformation of Copper Single Crystals journal June 1957
Physical Metallurgy journal December 1978
In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy journal February 2014
High-Entropy Alloys: A Critical Review journal April 2014
An atom probe perspective on phase separation and precipitation in duplex stainless steels journal May 2016
Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance journal November 2010
A Maximum in the Strength of Nanocrystalline Copper journal September 2003
A fracture-resistant high-entropy alloy for cryogenic applications journal September 2014
Physical Metallurgy journal January 1960
Mechanics and Mechanisms of Fracture book August 2005
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures text January 2016
High-Entropy Alloys: A Critical Review text January 2014
High-Entropy Alloys: A Critical Review text January 2014

Cited By (2)

An as-cast high-entropy alloy with remarkable mechanical properties strengthened by nanometer precipitates journal January 2020
Microstructure and properties of CoCrNi medium-entropy alloy produced by gas atomization and spark plasma sintering journal April 2019