The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C

Lan, Pixiang; Iaccino, Larry L.; Bao, Xiaoying; Polycarpou, Andreas A.

doi:10.1016/j.triboint.2019.105896

Title: The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C

Authors:: Lan, Pixiang; Iaccino, Larry L.; Bao, Xiaoying; Polycarpou, Andreas A.

Publication Date:: Wed Jan 01 00:00:00 EST 2020

Sponsoring Org.:: USDOE

OSTI Identifier:: 1557021

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Tribology International

Additional Journal Information:: Journal Name: Tribology International Journal Volume: 141 Journal Issue: C; Journal ID: ISSN 0301-679X

Publisher:: Elsevier

Country of Publication:: United Kingdom

Language:: English

Citation Formats


                    Lan, Pixiang, Iaccino, Larry L., Bao, Xiaoying, and Polycarpou, Andreas A. The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C.  United Kingdom: N. p., 2020. 
Web.  doi:10.1016/j.triboint.2019.105896.

Copy to clipboard


                    Lan, Pixiang, Iaccino, Larry L., Bao, Xiaoying, & Polycarpou, Andreas A. The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C.  United Kingdom.  https://doi.org/10.1016/j.triboint.2019.105896

Copy to clipboard


                    Lan, Pixiang, Iaccino, Larry L., Bao, Xiaoying, and Polycarpou, Andreas A. Wed .  
"The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C".  United Kingdom.  https://doi.org/10.1016/j.triboint.2019.105896.

Copy to clipboard


                    
@article{osti_1557021,

  title        = {The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C},

  author       = {Lan, Pixiang and Iaccino, Larry L. and Bao, Xiaoying and Polycarpou, Andreas A.},

  abstractNote = {},

  doi          = {10.1016/j.triboint.2019.105896},

  journal      = {Tribology International},

  number       = C,

  volume       = 141,

  place        = {United Kingdom},

  year         = {Wed Jan 01 00:00:00 EST 2020},

  month        = {Wed Jan 01 00:00:00 EST 2020}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.triboint.2019.105896

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

A critical review of the coiled tubing friction-reducing technologies in extended-reach wells. Part 1: Lubricants
journal, August 2017

Livescu, Silviu; Craig, Steven
Journal of Petroleum Science and Engineering, Vol. 157
DOI: 10.1016/j.petrol.2017.07.072

NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena
journal, November 2008

Lyons, K. David; Honeygan, Simone; Mroz, Thomas
Journal of Energy Resources Technology, Vol. 130, Issue 4
DOI: 10.1115/1.3000139

Impacts of polypropylene glycol (PPG) additive and pH on tribological properties of water-based drilling mud for steel-steel contact
journal, June 2017

Xiao, Huaping; Liu, Shuhai; Chen, Yu
Tribology International, Vol. 110
DOI: 10.1016/j.triboint.2017.02.025

Combined Effect of Pressure and Temperature on the Viscous Behaviour of All-Oil Drilling Fluids
journal, January 2014

Hermoso, J.; Martínez-Boza, F.; Gallegos, C.
Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles, Vol. 69, Issue 7
DOI: 10.2516/ogst/2014003

Stress–Corrosion Cracking of Surface-Engineered Alloys in a Simulated Boiling-Water Reactor Environment
journal, January 2018

Niu, W.; Li, Z.; Ernst, F.
Corrosion, Vol. 74, Issue 6
DOI: 10.5006/2673

PEI-RGO nanosheets as a nanoadditive for enhancing the tribological properties of water-based lubricants
journal, December 2019

Liu, Chengcheng; Guo, Yanbao; Wang, Deguo
Tribology International, Vol. 140
DOI: 10.1016/j.triboint.2019.105851

A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions
journal, January 2018

Zhang, Po; Lu, Wenlong; Liu, Xiaojun
Tribology International, Vol. 117
DOI: 10.1016/j.triboint.2017.08.017

Influence of additives on the friction and wear reduction of oil-based drilling fluid
journal, March 2019

Humood, Mohammad; Ghamary, Mohammad H.; Lan, Pixiang
Wear, Vol. 422-423
DOI: 10.1016/j.wear.2019.01.028

Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact
journal, June 2017

Zhang, Po; Lu, Wenlong; Liu, Xiaojun
Wear, Vol. 380-381
DOI: 10.1016/j.wear.2017.03.002

A review of biolubricants in drilling fluids: Recent research, performance, and applications
journal, November 2015

Kania, Dina; Yunus, Robiah; Omar, Rozita
Journal of Petroleum Science and Engineering, Vol. 135
DOI: 10.1016/j.petrol.2015.09.021

The Mittelplate oil field
journal, January 2005

Doehler, M.
Geological Society, London, Petroleum Geology Conference series, Vol. 6, Issue 1
DOI: 10.1144/0060461

Effects of Microscale Particles as Antiwear Additives in Water-Based Slurries with Abrasives
journal, March 2016

Xiao, Huaping; Liu, Shuhai; Guo, Yanbao
Tribology Transactions, Vol. 59, Issue 2
DOI: 10.1080/10402004.2015.1077410

Study of the influences of rotary table speed on stick-slip vibration of the drilling system
journal, December 2015

Tang, Liping; Zhu, Xiaohua; Shi, Changshuai
Petroleum, Vol. 1, Issue 4
DOI: 10.1016/j.petlm.2015.10.004

Experimental Investigation on the Influence of High Pressure and High Temperature on the Mechanical Properties of Deep Reservoir Rocks
journal, February 2015

Zhang, Peng; Mishra, Brijes; Heasley, Keith A.
Rock Mechanics and Rock Engineering, Vol. 48, Issue 6
DOI: 10.1007/s00603-015-0718-x

Similar Records in DOE PAGES and OSTI.GOV collections:

The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C

Journal Article Lan, Pixiang ; Iaccino, Larry L. ; Bao, Xiaoying ; ... - Tribology International

Not provided.
https://doi.org/10.1016/j.triboint.2019.105896
Effect of Cu nanoparticles on the tribological performance of polydopamine + polytetrafluoroethylene coatings in oil-lubricated condition

Journal Article Ghosh, Sujan K. ; Miller, Charles ; Perez, German ; ... - Applied Surface Science

For this study, the effect of Cu nanoparticles (NPs) on the tribological performance of the thick polydopamine (PDA) + polytetrafluoroethylene (PTFE) coatings in DTE-32 Mobil lubricated condition was investigated. PDA + PTFE + Cu NP coatings with 45 µm thickness were spray-coated with 0.12, 0.25, and 0.50 wt% of Cu NPs in an aqueous PDA + PTFE solution, respectively. The mechanical properties were studied by PeakForce quantitative nanomechanical (PFQNM) characterization and nanoindentation. The Young's modulus increased, and the coefficient of friction (COF) reduced with the addition of Cu NPs compared to PDA + PTFE coating. The PDA + PTFE +more »« less
https://doi.org/10.1016/j.apsusc.2021.150525

Full Text Available
The effect of counterface on the tribological performance of a high temperature solid lubricant composite from 25 to 650{degree}C

Technical Report DellaCorte, C

The effect of counterface selection on the tribological performance of a Ag/BaF{sub 2}-CaF{sub 2} containing composite coating is studied. Ceramic (Al{sub 2}O{sub 3}) and metal (Inconel X-750) pins are slid against PS300 (a metal bonded chrome oxide coating with Ag and BaF{sub 2}/CaF{sub 2} lubricant additives) in a pin-on-disk tribometer at 25, 500 and 650 C. Compared to the ceramic counterface, the metal counterface generally exhibited lower friction and wear at 25 C but higher friction and wear at 650 C. Friction coefficients, for example, for the Al{sub 2}O{sub 3}/PS300 combination at 25 C were 0.64 compared to 0.23 formore »« less
https://doi.org/10.2172/231376

Full Text Available
CHARACTERIZATION AND TRIBOLOGICAL EVALUATION OF 1-BENZYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOROMETHYLSULFONYL)IMIDE AS NEAT LUBRICANT AND OIL ADDITIVE

Conference Bansal, Dinesh G ; Qu, Jun ; Yu, Bo ; ...

Selected physical and chemical properties and tribological data for a newly-developed, imidazolium-based ionic liquid (IL) are presented. The IL is soluble in the SAE 5W-30 oil up to a certain weight percentage, and is as a promising candidate for use in lubrication applications, either in its neat version or as an oil additive. Characterization of the IL included dynamic viscosity at different temperatures, corrosion effects on cast iron cylinder liners, and thermal stability analysis. The tribological performance was evaluated using a reciprocating ring-on-liner test arrangement. When used in neat version this IL demonstrated friction coefficient comparable to a fully formulatedmore »« less
Tribological performance evaluation of oil mist lubrication

Journal Article Shamim, A ; Kettleborough, C F - Journal of Energy Resources Technology; (United States)

In this research work, the tribological performance of oil mist lubrication (pure mist), as applied to rolling element bearings, was investigated. In the first part of this research, tests were conducted to compare the performances of oil mist and conventional oil sump lubrication in terms of operating temperature and friction with variation of load and speed. In the second part, the two methods of lubrication were compared directly under endurance test conditions. The oil mist lubricated high-precision angular contact test bearings ran cooler by about 10 C. Also, the oil mist lubricated bearings had about 25 percent less friction. Inmore »« less
https://doi.org/10.1115/1.2906447

Similar Records

Title: The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C

Citation Formats

A critical review of the coiled tubing friction-reducing technologies in extended-reach wells. Part 1: Lubricants journal, August 2017

NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena journal, November 2008

Impacts of polypropylene glycol (PPG) additive and pH on tribological properties of water-based drilling mud for steel-steel contact journal, June 2017

Combined Effect of Pressure and Temperature on the Viscous Behaviour of All-Oil Drilling Fluids journal, January 2014

Stress–Corrosion Cracking of Surface-Engineered Alloys in a Simulated Boiling-Water Reactor Environment journal, January 2018

PEI-RGO nanosheets as a nanoadditive for enhancing the tribological properties of water-based lubricants journal, December 2019

A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions journal, January 2018

Influence of additives on the friction and wear reduction of oil-based drilling fluid journal, March 2019

Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact journal, June 2017

A review of biolubricants in drilling fluids: Recent research, performance, and applications journal, November 2015

The Mittelplate oil field journal, January 2005

Effects of Microscale Particles as Antiwear Additives in Water-Based Slurries with Abrasives journal, March 2016

Study of the influences of rotary table speed on stick-slip vibration of the drilling system journal, December 2015

Experimental Investigation on the Influence of High Pressure and High Temperature on the Mechanical Properties of Deep Reservoir Rocks journal, February 2015

Title: The effect of lubricant additives on the tribological performance of oil and gas drilling applications up to 200 °C

A critical review of the coiled tubing friction-reducing technologies in extended-reach wells. Part 1: Lubricants
journal, August 2017

NETL Extreme Drilling Laboratory Studies High Pressure High Temperature Drilling Phenomena
journal, November 2008

Impacts of polypropylene glycol (PPG) additive and pH on tribological properties of water-based drilling mud for steel-steel contact
journal, June 2017

Combined Effect of Pressure and Temperature on the Viscous Behaviour of All-Oil Drilling Fluids
journal, January 2014

Stress–Corrosion Cracking of Surface-Engineered Alloys in a Simulated Boiling-Water Reactor Environment
journal, January 2018

PEI-RGO nanosheets as a nanoadditive for enhancing the tribological properties of water-based lubricants
journal, December 2019

A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions
journal, January 2018

Influence of additives on the friction and wear reduction of oil-based drilling fluid
journal, March 2019

Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact
journal, June 2017

A review of biolubricants in drilling fluids: Recent research, performance, and applications
journal, November 2015

The Mittelplate oil field
journal, January 2005

Effects of Microscale Particles as Antiwear Additives in Water-Based Slurries with Abrasives
journal, March 2016

Study of the influences of rotary table speed on stick-slip vibration of the drilling system
journal, December 2015

Experimental Investigation on the Influence of High Pressure and High Temperature on the Mechanical Properties of Deep Reservoir Rocks
journal, February 2015